Automatic Storage System | Minecraft Tutorial | Java & Bedrock [1.20]

Hello everyone my name is nivala and welcome to another video today’s video is an automatic storage system which stores up to 32 different items all automatically sorted and of which eight are in build storage like this using a light indicator to show you how much you’ve got left also there’s a lot of

Space for manual storage upstairs which I tend to decorate a little bit I’ll show you at the end of the video what I made of it without further Ado let’s get into the build let’s go on screen you can see the layout of the build is 31 blocks long and 17 blocks wide

We’re gonna start off by digging out all of these holes which should in the end be five blocks deep the other holes are one block deep and this is where we’ll create a floor out of spruce blanks and stripped Spruce Wood in the five foot deep holes will create the bulk storage units Okay let’s head on and make one of these bulk storage units by first making a strip Spruce pillar on the sides stone bricks next to those they should be one block inward after that place four double chests facing the front on this spot and place four Redstone lamps right next to them

On the other side you want to face Hoppers into these double chests side and one on top of those and then we’ll create the light system which will indicate how much is left First box in these chests using some stone bricks just like this then place a comparator on this spot facing towards the chests place a block a solid block behind it place a redstone repeater next to it a block next to that and a redstone dust in front of it

For the second lamp place the comparator on a block right here there’s a solid block behind it a repeater next to that solid Block in front of the repeater and then we make a u-shape like this and place two redstone dust right here we want to block off the

Connection between these two Redstone dusts so place a solid block right here and then for the third level we’re replacing a comparator right here there’s a solid block behind it A redstone repeater next to that a block in front of that repeater and a redstone dust on this spot again you can see that it connects and you want to break that connection So for the final level you actually want to repeat this process one more time by placing comparator a repeater and two redstone dust in these spots and break off the connection using a block right here that’s it and make sure you check if it works before moving on to the other boxes

You can close it off using some Spruce slabs and be sure to put a torch inside otherwise mobs might spawn in here You can check if it works by putting some blocks inside of this chest one by one and also taking them out again to make sure that the lights turn off as you can see here it works and once you’ve done one of these boxes and make sure that it works

You can do all other boxes as well eight in total now you want to create a way downstairs because we’re going to work on the basement for now start by creating a staircase make sure that you light everything up because otherwise mobs might spawn we’ll then create archways in between

The strips roof Spillers using some Spruce stairs and a spruce trapdoor you want to do this at each pillar all the way to the back then in each corner you can hang a lantern from a spruce fence and you can fill in the floor using Spruce planks and strip Spruce Wood

In the end it should look a little bit like this this is just my style you can do this any way you like we will now start with the ground floor storage start by placing stripped Spruce pillars with five blocks high with stone bricks next to them

In between these stone bricks you want to place chests four blocks high so in the end you should have 12 chests in between these stone bricks go to the back and place three upside down stairs above these chests so you can still open them and then Place Hoppers behind the chests

Facing into them there is also a hopper coming from below from the bulk storage create a hopper Tower just like this next to the three you already made and place a row of uppers on top of them foreign brick structure like this in which we’re going to make the automatic sorter place

A redstone repeater and a redstone torch on these spots place a redstone comparator on top with three Redstone Dust behind it you should end up with this and this is going to filter out the exact items you need at this chest want to create this system behind every chest

And once you’ve done that grab an extra Hopper which faces into this top comparator after you’ve done this for one of these boxes you want to do this for all the other boxes as well so that’s eight times four that means that in total you can sort out 32 items

Chests but how are we gonna get everything in there you want to grab packed ice and honey blocks using this packed ice you want to create a line on which items can slide very fast in front of these top poppers behind it on top of these Hoppers you want to create a line

Of Honey blocks items that will slide on top of this eyes will stick to the honey blocks and therefore get sucked in by The Hoppers I will demonstrate this later on in the video time to choose which items you want to sort out as you can see I chose to store

My wood my food my mob drops and some bamboo and slime into this automatic sorting system foreign go down to your bulk storage I already made sure that all of The Hoppers are containing the right items to make sure that only the item that you see in front

Gets filtered down into the chest in this Hopper I want to store my Cobblestone because this goes down to the build storage to make sure that it only stores Cobblestone you want to add four single items to the last four spots in this top Hopper then you want to add

A full stack of the item you want to store in the first spot of the hopper the hopper will give off a redstone signal which reaches all the way to the back this gets picked up by the redstone repeater which goes on which then turns off the redstone torch in front of it

Unlocking the hopper going down as soon as the restroom signal that’s put out by the hopper is too weak to reach the end of the three Redstone dusts it will switch off the redstone repeater and thereby turn on the redstone torch and thus make sure that the system will stop

Filtering through items if you’ve done this correctly then it should end up on 41 blocks inside each Hopper now how do we get the items on top of the ice we’re going to create a dropper elevator place down some stone blocks right here with a double chest on top

Next to this double chest you want to create a tower of droppers all the way up to the level of the packed ice back down you want to place a hopper below the double chest facing into the dropper live behind the hopper place a solid block then place a Red Zone comparator facing

Into that lock place a block behind it place a redstone dust another block next to it a redstone repeater a redstone dust and then place an observer facing this redstone dust right here We now need to power all the droppers so you want to place an observer facing into the Redstone Dust with a redstone dust on top of it then place an observer again facing into the redstone dust and repeat this up to the fifth level in this case It should look like this in the end so this is how we get things up there but if for some reason an item isn’t filtered through in the system we also need to have an overflow chest so at the other side place down a double chest as

Well and place Hoppers facing into it from the top connect these Hoppers to the packed ice we need to make sure that the items stick to the honey so we need to create a water flow which flows straight into the honey blocks this is why we need to create a Bend like this

Make sure that you create a channel using some stone blocks in the end it should look like this to make sure that the items flow along the eyes you need to create some water streams using signs you can make sure that the water doesn’t stop flowing

At the corners make sure that you place signs at the Block in front of the corner and then from the corner on you create a new water stream do this all the way to the end on top of the dropper elevator Place some blocks above it to make sure that

The items stay inside of the water stream it out I’ve grabbed some slime balls some wheat and some Mangrove wood to check if the system is working put your items into the input chest and as you can see the dropper elevator is working and it’s dropping the items into the water flow

The Slime balls go all the way to the end and as you can see they get picked up by the hopper which should only filter out the Slime balls also see in the mangrove wood is being picked up at the place where the macro Hood should be picked up

Same goes for the wheat as you can see here sometimes an item doesn’t get picked up and it will flow all the way to the end actually over here it gets stuck behind some stone bricks so we need to replace these stone bricks by Honey blocks this

Is why it is so important to test your system before moving on you don’t want to figure this out when you are done with your build Test it out with the remaining blocks and maybe add a block which shouldn’t be picked up by the system to make sure that it works it looks like it’s working now and actually that’s it your automatic sorting system is now complete it’s time to start decorating your build

For the decoration you want to start off with stripped Spruce pillars of six blocks high you can see on the layout for the foundation where these pillars need to be to make these pillars look a little bit sturdier use a stripped Spruce Wood and a spruce stairs fill in

The walls using stone bricks Natural Stone and andeside blocks create Windows on the side using Spruce fences for the first floor one block below where you connected the beams for the ground level place an upside down Spruce stair with a spruce lock on top and on top of that Spruce lock Place another

Six blocks on the sides of the building after that using Spruce slabs make your way up to the middle of the roof and connect both sides of the roof using Spruce slabs alternated with double screw strap doors do this all the way around and you should end up with

Something that looks exactly like this to give the foundation an even sturdier look we’re going to add some Spruce trapdoors at the pillars right here do this all alongside the build on both sides should end up like this and of course don’t forget to place the

Spruce wood and the spruce stair on this corner as well time to make the Arches on which the walls from the second floor will rest using Spruce stairs and a spruce trapdoor fill in these three spaces For the five block wide spaces Place through stairs with a spruce wood on top then Spruce stairs against those and the sprue strap door in the middle also Place some Spruce strap doors on the Spruce Wood right here to give it a more detailed look you want to repeat this all along the

Bill on both sides Next up fill in the walls at the side using stripped oak wood and some Oak planks scattered around for a more detailed look The side of the build place two Spruce columns and fill in the walls using stripped Oak and some Oak planks leaving space for Windows of three by three the one in the middle should be one block higher than the one sides Next up we are going to create some windows on the sides of the building starting with the small window over here places Spruce dreadboard with a leaf on top of trap doors on the side as window shutters Place White stained glass panes as the windows a spruce fence gate

With a campfire on top and make sure that you extinguish this fast otherwise your building might just burn down for some extra detail you can put some Spruce signs alongside the leaf to make it look like a placeholder The three wide windows are actually pretty much the same using some white stained glass and some Oak trapdoors play screw strap doors below the window with a spruce slab in between Place some leaves on top Bruce signs alongside it and don’t forget your Spruce fence gates and the campfires on top

You now want to repeat this along all of the windows on both sides of the build Now let’s work on the entrance use Spruce stairs and Spruce slabs to create a roof entrance it should connect just below the middle window and it should have this shape finish the entrance design using some Spruce trapdoors and some upside down Spruce stairs you’re using some Spruce fences you can

Actually finish the entrance next up are the bay windows at the side of the build as you can see I’m placing down grass blocks here because I want to place some flowers you can also play some Leaf blocks if you don’t have grass blocks available And you want to repeat this at the other windows on both sides of the build for the middle bay window you might need to fiddle around a little bit with the entrance roof all right now let’s start working on the inside fill in the ceiling of the hole using stone bricks

And at the place of the strips through Spillers you want to create archways using using through stairs and screw strap doors the archways on both sides you want to play Spruce fences with lanterns hanging from them after that fill in the side walls and create a Stairway up make sure you

Light everything up to make sure that no mobs will spawn inside of your build time to fill in the roof using deep slate brick and deep slate tiles slabs fill in the roof on top of the roof alternate stacked and single Spruce slabs all along the top of the build

We now want to create some extra diesel on the roof by creating some Dormers using stripped Oak make a five block wide window with a spruced roof on top these should align with the windows on the side of your building foreign I kind of messed this one up so let me try it again a little bit more slowly hopefully it’s easy enough to follow Don’t forget to finish off the details with a spruce there a spruce slab behind it a trap door behind that we want to create four of these dormers on each side of the build don’t forget the lanterns you can create a chimney as well once you’ve built four of these Dormers

And a chimney you can actually mirror it to the other side should look like this in the end it’s then time for the interior fill in the ceiling using Spruce slabs to make sure that you don’t see the outside roof once you’ve done that create some Spruce pillars to indicate your sections and

Create a walkway using Spruce planks along the middle of the build fill in the floor using stone bricks and create walls out of stripped Oak to wall off different sections of your manual storage which will be on this level I will not show you how to create each

Section by itself because this is all up to your own taste I will just show you how I fill them in and maybe give you some inspiration I always like to create a little bit of a crafting Corner in the beginning and after that I give each

Section sort of a theme so here I have the skull section the other side I’ve got the nether section I then got the Redstone section over here this is where I store all of my oars The geode section which also holds my calcite this is where I keep all of my saplings this is where I keep all of my tools and on this side I keep all of my armor and my weapons and then finally this is where my bed is

And where I always like to start or logo from my world and one final remark don’t forget to detail the outside of your build using some and some lanterns anyway that’s it for me I hope you enjoyed this build and like if you did subscribe if you want to see more and I

Hope to see you in the next video cheers everyone Foreign