Crazy Train Build – Shockingly Unique Minecrafting Tutorial

Hello rail fans and welcome to French Fred trains we don’t have a lot of time today to do videos so we’re going to be doing a quick and easy freight car today and we’re going to be building this Illinois Central golf covered Hopper car and this is what it looks like here so

Let’s get right into the build but before we get started make sure you help out the channel by liking commenting subscribing and sharing the video wherever possible to help grow this Channel’s reach and if you really want to help out a struggling YouTuber and help the channel be able to continue

Making videos every day we now have super thanks available so you can hit the super thanks button and make a small donation to help keep this channel going and supplement the tiny amount of money I get from YouTube but if not your likes and Views are thanks enough now let’s

Get on to our video here so as usual we’re going to start off with a coupler so take out a a dark oak stair and attach that up under it a sideways dark oak V skap then on bottom on the next block back we’re going to put a netherite

Wheel on each rail with an in Rod axle in between them on the side of each wheel we’re going to put a deep slate tile top slab here and here in front of this we’re going to do five deep slate tile stairs facing this way and then turn around and put five

Deep slight tile stairs facing the other way then behind that another set of netherite wheels on each rail with an enrod axle and a deep slight tile top slab on the side of each of these wheels then on the side here we’re going to put a wither skeleton skull on each

End and two fence gates on the middle same thing on this side Here then on the top middle coming off this coupler do four black Concrete in the center so it’s like that and then we’re going to extend that past these wheels on the second layer and we’re going to come a total of 19 blocks in a

Row past where the wheels are so four on the end and then 19 sticking out then on the next block behind that on bottom put netherite wheel on each rail with an End Rod axle then a deep slay tile top slab on the side of each wheel behind that five deep slate tile

Stairs going this way then turn around and do five deep slight tile stairs going this way behind that another set of netherite wheels and an Enron axle then a top slab here and a top slab here and again we’re going to put a wither skeleton skull on each end and

Two Fen Skates on the middle and we’ll repeat for this side here then we’re going to add four black concrete on this top middle and then coming off the end of this turn around and get a dark oak stair on this second second layer in the middle for the

Coupler and then under it put a dark oak fence gate right here just like that now come underneath on this bottom center here we’re going to leave three empty blocks of Space Between the Wheels and on the fourth block put a single black concrete repeat from this end leave

Three empty blocks of space behind the wheels and a black concrete on this fourth Block in the middle then we’re going to put three upside down Blackstone brick stairs centered on this concrete like this on each end and basically we’re just going to go around under here with upside down

Blackstone brick stairs all the way around the black concrete wrapping around all the corners and same thing here so we’re basically making 3 by3 upside down pyramids of stairs then we got to find our Center between here so behind where these stairs are we’re going to leave four

Empty blocks of space and put a single black concrete on the Bott bottom middle on the fifth block and that should be our Center and then same thing we’re just going to go all the way around that black concrete with upside down black stone brick stairs wrapping around all

The corners to make another upside down pyramid here just like that then up here three black concrete on top of the stairs on all three sets of stairs here same thing on this side so three here three here and three here then turn this way we’re going to put an

Upside down Blackstone brick stair facing the end of the car here and here then repeat for this Center Bay and repeat for this end then we’re going to turn around and put an upside down Blackstone brick stair facing this way here and here then here and

Here then here and here then down here we’re going to take Blackstone brick top slabs and we’re going to put a row of three here and then three on this side then one top slab between here and here and then three right here on this end and then three

Here one in between here and here then come to the end and switch to Acacia top slabs put two coming out here on the end and two here and then we’re just going to come all the way down this top outside edge with a row of vation top Slaps and we’re going to bring it down to this end then we’re going to put one right here right here come out by two and then same thing we’re just going to come all the way down this top outside edge with the c top slabs going end to end here just like

That now we’re going to come down here and put a single dark oak ven skate on the middle of all three of these Bays on the side and same thing on this side here then we’re going to come up top on the third Block in from the end where the

Blackstone brick slabs are and we’re going to do a 5×3 of stripped Acacia logs making sure the pattern is vertical on all of them then on top put five upside down Acacia stairs going this way here then two vertical stripped Acacia logs on each side like this and then another

Five Acacia stairs across here going this way then in this corner down here we’re going to put a column of three Acacia fences then three on the center and three on this corner then down in here we’re going to put a sideways lightning rod here and

Here on this corner right here on the side of the fence we’re going to put a column of Acacia fence gates coming up and then wrap around the corner in a column of AAA fence gates right here coming up then on the other side of it it’s not a

Full column so we’re going to come down here and we’re going to put two fence gates here and two here then we’re going to repeat on the other end so we’re going to come on this third Block in where the Blackstone brick slabs are another 5×3 of vertical stripped Acacia

Logs then on this third layer five upside down acaia stairs here then two stripped logs vertical here and here then five more upside down stairs here then under the corner a column of three ACAA vences here three in the center three on this side then down here we’re going to put

Two vence gates here and two here then right here we’re going to put one sideways lightning rod here in here put two grindstones here and then we’re going to close a jungle trap door here for the brake wheel on this fence do a column of a fence gates right

Here and then on this side a column of four fence gates here then we’re just going to fill in our sides so on this Outer Edge start down here and we’re just going to fill it all in four blocks tall with strip AAA logs making sure that the pattern on every

Single one of them is spacing vertically and that will give us these nice lines on the side of the car And bring it right down to this other End then we’re going to come over here and repeat for this side and we’re just going to fill in this whole side for blocks tall again all with our stripped Acacia logs and again making sure that the pattern on every single one of them is facing vertically

Then we’re going to raise it up one more so come around this end with another layer of strip AAA logs and again making sure everything is vertical we’re just bringing this whole Outer Edge up by one so it ends up five blocks tall fill in that whole side as Well make sure we get these three on the end here then inside of here on the top we’re going to fill this whole top in with strip AAA logs except in this middle here we’re going to go sideways with the pattern and just bring this all the way across the

Top down to the other end and then out here put a fence gate here and here to raise up this ladder and we’ll repeat on this end on the other side put a vent gate here and here then we’re also on top of the end here going to open a fence gate on

The center and repeat on this end open a fence skate on the center right here now on top of the end from the left put four Acacia slabs here then on this row here we’re just going to do a full row of Acacia slabs coming down the top to the other

End then same thing on this end on the left put four slabs here and then right here do a full row coming across this layer with Acacia slabs then on this Outer Edge we’re just going to put a full row of Acacia trap doors facing outward like

This and repeat on this side and another full row of Acacia trap doors across here then we’re going to take our strip AAA logs skip one from the end here and put a row of five in the middle going vertical for the hatch repeat on this

End so leave one empty block of space put five then skip another gap of space and put another row of five then from this end skip one and put five here that’s all the hatches on top then we have to start putting our logo on so

We’re going to line up with this second hatch from the right and lined up with the second Block in on it and on the top of the side right here we’re going to change these two blocks to Black concrete so it lines up like this under it we’re going to do

Two rows of four like this and change that all to Black concrete and then under that two on the bottom metal Chang to Black concrete so it looks like that we’re going to repaint on this side so come to the second hatch from the right on the

Second block end of it aligned here change these two to Black concrete then under that knock out two rows of four here and change to Black concrete and also two on the bottom middle so we have that same shape on this side like that next take out an item frame skip

One block over from this logo and we’re going to put a row of eight item frames up here then come under it on this end and do a row of seven item frames here then under this side do a row of four item frames here and we’re going to repeat on

This side so one block over from this logo here on top do a row of eight item frames up here then under this a row of seven here and under this a row of four right here next come up on this corner here and we’re going to put a dark oak sign

Here and a black stone button above it then down here we’re going to put two dark oak signs right here then a black stone button here and two down there we need to repeat that on this corner so come over here dark oak sign here and a button right here then

Down here three buttons here A Sign Here a sign here and a button right here then we’re going to come down underneath this middle section and put three Blackstone buttons here repeat on this side down here put three buttons here then on this corner here on this level we’re going to put a

Dark oak sign here then Skip One in a row of three signs under the left hand side do a two by two of Blackstone buttons Skip One and do the lell shape then up in this corner we’re going to put a button and a dark o sign up

Here and we’ll of course have to repeat that on this other side so we’ll come down here down here a 2 by two of buttons skip one in this L shape then a dark oak sign here Skip One and do three signs here then up in this corner we’re going

To put a sign and a button then come on top of the end we’re going to put two buttons here and one here and finally repeat down here a button here and two here just like that now come down here and put two buttons here repeat on this side and put two

Buttons down here now we have to make a lot of banner so come into a loom orange Banner black d put a vertical in the center new Banner vertical on the left horizontal on bottom new Banner vertical on the left and right diagonal new Banner vertical on the left and right

Horizontal on top and bottom new Banner horizontal on bottom and top diagonal go to Orange die and put an orange border around every single one of these letter banners here and now we’ll go and place these and that’s what all these item frames were for so on this top row of item

Frames we’re going to use our banners to spell out Illinois and then of course repeat on the other side so on these item frames up here same thing use the banners to spell out Illinois Then we can clear some of these banners off but keep the letter L will’ll need it then come back into our Loom orange banner and black d again vertical on the left horizontal on top and bottom new Banner three horizontal stripes vertical on the left new Banner

A vertical on each side and a diagonal new Banner vertical and in the middle horizontal on top new Banner diagonal vertical on the left top half black new Banner vertical on the left and right horizontal in the middle and top then go to orange tie and go ahead

And put an orange border around all of these Le banners as well then we’ll come place these and this is for the next row of item frames and now we’re going to use our banners on the item frames to spell out Central and then of course repeat over here and we’ll use our banners on these item frames to spell out Central and then once again we can clear some of these but keep the letter L again and then we’re once again going to go back into our Loom with an orange band B and black Dy we’re going to put a vertical on the right then make the top

Half orange go back to black Dy put a horizontal on the top and bottom and a vertical on the left new Banner a vertical on each side then a horizontal on the bottom new Banner vertical on the left horizontal on the middle and the top once again go to Orange die and put an orange border around all three of these this will be our final lettering so down here use the banners on these item frames to put golf and repeat on this side use the

Banners on these item frames on this side to put golf and now all the lettering is done now come into our Loom with a black banner and white Dy put a vertical line on the right and a horizontal on the on the top and bottom new Banner a vertical

Line on the left and a horizontal on top and bottom new Banner we’re going to put a white border on it and a horizontal in the middle and then we can come place these and this is to finish off the logo so on the center of this black we’re going to

Put these two back to back like this then a birch button here and we will repeat on this side put these two back to back like this and a birch button here then take this other banner down here and we’re going to put one here and one

Here and we’ll repeat over here and put one here and one here and now all the details are complete so there we have it folks we’ve completed our Illinois Central golf 3 Bay covered Hopper car I hope everyone enjoyed the build thanks for watching don’t forget to like

Comment and subscribe and everyone have a great week stay safe out there rail fans