Hey everyone blue here back another minecraft build tutorial today i’m going to show you how to build this fisherman’s heart now this is a really simple design and it fits perfectly into our village so here are the layout and the materials you’re gonna need let’s build this Before we get started we need to make sure we have two things in place first of all we need to make sure our layout is exactly one block above the water level just like the layout in front of us next we just need to make sure that any Of our pillar blocks that sit inside the water are taken all the way down to the bottom of the river we do this using strip spruce logs using strips bruce loss we’re gonna build three block high pillars on the blocks marked in green this includes replacing the green blocks themself Now we’re going to do the same with the orange blocks but we’re going to build these two blocks high instead of three using strips bruce logs we’re gonna build five block high pillars on the blocks marked in yellow and nine block high pillars on the blocks marked in red Next we’re going to place down spruce planks on top of the grass inside the bordered area making sure that we extend up the pier and ignore the area marked in yellow now we’re going to replace the blocks marked in yellow with spruce planks and then remove the remaining of the bulldog Add upside down spruce stairs around the edge to finish the platforms from this point here we can cover in the rest of the area with our grass box replace any of the dirt that gets seen underneath the platforms with a combination of stone and stone bricks Starting with the smaller pillars of the house we’re going to connect our strip spruce logs all the way around at the very top of the smaller pillars then we’re going to do the same at the top of the taller pillars fill in the lower level walls with your White concrete powder removing any of the spruce planks that are in the way let’s add some doors and windows starting at the front here we’re going to place a window here and a door just here around this side we’re going to place a window here and a door just here Now that we have our doors and windows in place let’s head round to the back of the build and make some windows on the upper level we’re going to start by adding two beams leaving a one bullet gap in between them there’s a spruce there on the bottom half just like this On each side we’re gonna place an upside down stair in the gaps here a slab between it and then a trap door right in the middle to create a nice little ledge on the left and right hand side we’re going to go ahead and just fill these Walls in with white concrete we will texture all the walls later on the front of the build we’re going to start by removing this top pillar just here and replacing one further down here then we’re going to bring a pillar up on every other block to the same height just like so Then in those gaps we’re going to place our white concrete On the left hand side above the doorway we’re gonna make a little balcony we’re gonna do this by placing three of our planks just here surround it with the upside down stairs and then place three slabs underneath in the middle above here we’re gonna break these two for a door Now let’s start working on the roof we’re gonna grab our spruce stairs and starting from the top roof we’re gonna place a stair here and then one over hanging at the edge we’re gonna get rid of this one and place one on every other block making Sure that we overhang one on this edge as well in the gaps we’ll place an upside down stair behind the stairs that overhang we’re gonna place an upside down stair with a full block on top we’re gonna place a stair on top of those with an upside down stair behind them And again a full block on top place a stair on top again upside down stair behind and a full block on top once again now we’re gonna place a stair on top of these ones and then facing from each side we’re gonna place an upside down stair facing outwards A normal stair on top and that upside down stair in front do that on both sides Now we’re going to repeat the pan on this side of the roof do now we’re going to fill in the gaps of the roof behind using our strips bruce logs we’re going to build the pillars coming up from here and here these should be one two three four blocks high Then two blocks of the white concrete each side and then five blocks in the center and of course we’re going to repeat the same pattern on this side Now we’re going to use our spruce stairs and we’re going to add a little ledge on the inside starting from the white concrete we’re going to place upside down stairs across this edge and then upside down stairs across this edge then we’re going to turn around and do Exactly the same on this side In the middle we’re going to go ahead and place a row of spruce planks just like this we’re gonna place a full block on this side and then three slabs through the center Now using the gray concrete we’re gonna go ahead and just run it all the way across this gap here and then put another on top then we’re gonna add two rows across this one at the top we’re just gonna add one row will come back and texture this in a Little bit for now we’re going to go around the other side and repeat the same process now we’re going to repeat the process for the lower roof down here we’re going to start at the front again and we’re going to overhang one stair to this side get rid of this one and place One on every other block place an upside down one in the gap and that upside down stair just behind it we’re going to repeat the same thing on this side here now we’re going to place a full block on the upside down stairs at the edge a normal stair on top Upside down one behind it with a full block on top stair on top of those upside down one behind four blocks on top two stairs facing each other an upside down stair in the middle a normal stair on top and then upside down stair facing outwards Again we’re gonna go behind this edge of the roof here and even a one block gap between them we’re gonna appeal to two four block high pillars with these strips bruce logs and then fill in the gaps with the white concrete now using our upside down spruce stairs We’re going to go ahead and we’re going to place a row of upside down stairs across here from the white concrete then from the next pillar we’re going to do the same thing and then turn around and do the same thing on the other edge making sure they are upside down In the gap at the very top we’re gonna put some spruce planks we’re gonna place one plank here a slab here and then two of our spruce trap doors like so the gray concrete starting at the bottom we’re gonna fill this gap here with two layers This one here with two layers and then just a single layer at the very top and of course we’re going to repeat that on this side here now on the upper roof over here we’re going to find our center block right here we’re going to place a trapdoor There and there we’ll place another one up here and then one on the very top here then we’re going to place a stair kind of stair and of course we’re going to repeat that on this side as well in the middle here we’re gonna go ahead and replace that one with a Um trapdoor and then we should have something that looks like this okay before we move any further i’m gonna go ahead and texture up the build now for the white concrete we’re gonna texture with some diorite and some white concrete powder and for the roof we’re gonna texture with some gray concrete Powder and some gray wool now you don’t have to do this guys if you don’t want to but i do think that it improves the look of the build above the doors on windows go ahead and replace the white concrete with a diorite stair by placing it upside down like so Okay let’s start adding in a few details we’re going to start by getting our spruce planks and just to the side here we’re going to replace these with some slabs then we’re going to place a slab on all of our little pillars on this edge here by the door we’re Gonna place some upside down spruce stairs and then some spruce slabs in the gap here on this side we’re gonna place some fences leaving this one on the very end here we’re gonna place fences around this edge this edge we’re gonna place three of them in this gap here And then run them all the way down the side here connecting to this final pillar on the side here i’m going to replace these three grass blocks with some of these strip spruce logs just to create a nicer finish now starting from this side here i’m Gonna go ahead and i’m gonna place a two high pillar just here we’re gonna place two here two here two here two here now because we’re on the corner here we’re going to replace that’s there with a two block high one there place it one here one here one here And we’re going to replace this one with a two block high one just there place a stair on top making sure you’re facing in towards the pillar now using our underside wall we’re gonna place one on each side of these two little pillars here on top we’re gonna place one Two of our spruce fences then from the back wall here we’re gonna place one two three four of your campfires bring them all the way across and extend them until you reach the fence then we’re just going to put them out with a shopkins next we’re going to add some doors and Windows so we’re going to place our doors from the inside and then we’re just going to put in a glass pane of your choice i’m just using the clear one you guys can use any glass pane you wish don’t forget at the top here to come and Replace this block here with a plank on the inside here we’re gonna actually just run some planks across this little edge here and then we’re gonna place a door just there this wall here we’re gonna leave the white strip we’re gonna break one two three and four And then we’re gonna break these two here all the way down break this block and this block and we’re basically just going to put a beam with our strip spruce logs all the way across like so Now at the side here we can actually replace this with a beam like this i think it probably looks a little bit nicer and then on the inside here just go ahead and fill your floral all the way across like so we’ll come back in here and add a little Bit more detail in a little bit but for now we’re going to put in our window panes inside here then on the outside here we’re going to go ahead and add a fence around this little balcony ledge here just like so now this is the exterior pretty much Finished so now it’s just about adding some final little details so let’s start by grabbing our strips bruce log at the very top here we’re gonna put two on here two up here and then around the back of the build we’re gonna place two just like so We’re gonna put a dark oak button just on the top you can’t put any button of your choice it hasn’t gotta be dark oak i think the dark oak just stands out a little bit okay before we move on i did forget to actually texture the roof so just to Quickly go over it guys the roof is textured with the great concrete powder and the gray wall alongside with the gray concrete that we placed in the first place so i went ahead and done that off camera i did mention about in the video so in case you missed it make Sure you don’t forget to go back and do the roof as well now with that being said let’s go ahead and add a little bit of lighting we’re going to start down at the front of the dock here and we’re going to just place a lantern right in the middle There one of the campfires back then on this little sticky outfit here we’re going to place a grindstone a chain underneath we will need to crouch to place that chain and then a lantern on the bottom of that on the one above here we’re gonna just place a grindstone and then a lantern Because we haven’t got quite enough room here to place a chain as well round to the back of the build we’re gonna go ahead we’re gonna place a grindstone then we’re gonna crouch we’re gonna place a chain underneath a second chain and then a lantern underneath like this Rather this side here we’re gonna go ahead and we’re gonna put a chain on this side and a chain on this side here and then we’re gonna place a lantern underneath each of those just like that and then we’re gonna go around to the other side and do exactly The same thing so we’ll place a chain on the corner chain on the corner and then a lantern and a lantern there we go now heading back round to this side here let’s add a few little details so that this starts to feel a little bit more like a fishing dog So first of all we’re gonna go ahead and we’re gonna come down to this little corner here and we’re gonna build some kind of fish in there so from the corner block here we’re gonna go over by one more and face this way place one trapdoor then we’re gonna crouch and place one Two and three on top making four in total then we’re gonna leave a one two three block gap and on the fourth one over here we’re gonna place one facing towards the trapdoor that way then place another four like this down here we can crouch and on the Bottom half of that top trap door we’re gonna place slabs coming across then we’re gonna place some cobwebs underneath like this we’ll place one more on that side and then we’ll put two on this side here just so it looks a little bit uneven to make it feel a Little bit more like a sort of neck you could also do three in the middle maybe and maybe just one on that side in time depends entirely how you feel it looks better but either way just makes us look a little bit like a hanging fish in There maybe they’ve had it out in the water and it’s just hanging up to dry for the moment now just for a couple of extra little details we’re gonna place a chest just down there i think we can place another chest about there and then i think we’re gonna use a few Barrels maybe so maybe we’ll put one two three maybe four like that um i think we’ll place one here next to that chest this little corner here we’re gonna just make something something like that i think just to make it feel like it’s being used then over here in the corner we’re going To place a composter with a leaf block on top this is the acacia leaves and i am using the jersey boy bushy leaves add-on i am using a default texture pack it’s just the bushy leaves that change so if you guys want to do that be sure to check The link in the description now i’m going to add a couple more of these around just as a sort of little decoration so i think we’ll put one here and again we’re going to put one of the leaves just on top then if we head around to this side of the build here Just as a little decoration we’re going to put one in the middle of these two gaps with one just on top like this you can make it taller if you want to it’s entirely up to you and what i might just do is i might just add a little row of Trapdoors there and we can add maybe something um something like that maybe bring this one down let’s go down one more and then get rid of that one in the corner and that one there um actually feels a little out of place let’s put that one there and we’ll bring one down Something kind of like that i think we’ll get rid of that one there there we go and then around the back here we’re going to do something similar so we’ll bring it up let’s go across let’s bring it all the way across for a minute bring this one down by two Breaking that top one so we’ve got two dangle in there and then we’ll have one dangle in there let’s get rid of that one and get rid of that one yeah i think that looks pretty good okay that just about finishes the outside of the build guys so let’s Quickly head on the inside and get in a stairway and a couple of little bits and then i’ll show you what i’ve done with my interior so first of all the inside it is pretty dark let’s put a lantern on that beam there right in the middle Then from this beam here we’re gonna go to the first white concrete block here put a stair here and a stair here directly in front of the door put in a stair there got a full block at the back here then upside down stair there upside down stay there Break one two three of the planks just here and then at the top here one and two and then put two stairs break this one on the corner and basically we’re just going to build a pillow all the way up here now we’re going to take that all the way up to the Ceiling replacing this stair here and bringing it down and the two sides let’s just put some upside down stairs then we’re going to place one two three four chains and then lantern at the bottom just like this to add a little bit of detail we’ll go ahead put a trapdoor there We’ll put a lantern just inside here to brighten up this little bit of a room here and then i think we’re gonna head downstairs here and i’d say that is pretty much done guys so i’m gonna quickly show you what i’ve done with my interior for a bit of Inspiration but this is a little fisherman’s hut so we’re gonna keep it pretty basic um so yeah guys let’s go ahead and see what we did okay again guys i kept this one very simple on the inside so as we come to the inside here we’ve got a little Stairway there we’ve got a little sink over here maybe for cleaning up some fish and stuff like that a little bit of storage some little examples on the wall of some fish maybe these are the sort of fish that we have in the little river in Front of us so it’s kind of like a little bit of an information area maybe a little bit of a table a little desk over here with a fishing rod some more storage and some area for hanging some stuff on um again like i said very basic in here Upstairs here again very simple we come up to the bedroom we got a couple of beds some beehives there i don’t know why i just felt like it just finished the edge of the room it looked a little bit funny without anything there so the beehive seemed to work pretty well i think A little shelf of a flower on top a little chest just in the middle and then a little barrel over here with a flower pot on top and there we go guys i think this works great as a little fisherman’s hut this is perfect for the fisherman so if You’re doing profession houses this will work great for a fisherman’s house um but yeah guys i really enjoyed this build i hope you guys have been enjoying this series too if you did and you want to see more houses like this don’t forget to let me know in the comments What one you would like to see me build next but for now guys i’m going to leave a couple of links on screen now so be sure to check those out with some very similar builds but for now this is blue now signing out and i will catch you Guys in the next one Video Information
This video, titled ‘The BEST Fishermans House Design in Minecraft’, was uploaded by BlueNerd on 2020-08-11 16:41:13. It has garnered 332198 views and 9243 likes. The duration of the video is 00:26:11 or 1571 seconds.
In this build tutorial i will show you how to build a Fisherman’s house in minecraft. This is a simple tutorial is designed for a small village and can house a couple of fisherman villagers. It’s fits perfect on a small lake and is also a nice starter house in a medieval/rustic style.
If you enjoy this build and want to see more don’t forget to give it a like and tell me in the comments what villager house we should build next.
Join my community server by becoming a YouTube channel member or patreon here – https://www.patreon.com/bluenerd or https://www.youtube.com/channel/UC1ANc72wQdusmOHwOL1-93g/join
#Minecraft #HowToBuild #MinecraftTutorial #MinecraftBuild #Tutorial
******************
► Texture Pack: Better Leaves Add-on ► Shaders: BSL
*******************
❤️ Want More? Subscribe and Never Miss A Video ► https://www.youtube.com/channel/UC1ANc72wQdusmOHwOL1-93g?sub_confirmation=1
💻 Follow Me:
► Twitter: https://twitter.com/BlueNerdYT ► Discord: https://discord.gg/mmPqzEK ► Patreon : https://www.patreon.com/bluenerd
*******************