EPIC Minecraft Home Tour – You Won’t Believe This!

Do How’s it going everyone my name is snow welcome back to my channel or if you’re new here i hope you stick around today we’re going to be doing a tutorial for the encanto casita when i saw this movie for the first time while i was visiting my parents for the holidays as

Soon as the house came up on the screen i paused it turned to my parents and said i have to build that so here we are a full material list for this build is in the description below today i’m using the mizuno’s resource pack as well as a

Few other packs like mizuno cit a few ghoul craft cits and better leaves to get the fluffier leaves and those pink birch leaves the links to all of the packs i used the seed coordinates and links to my socials are all in the description below while

You’re down there if you go on to enjoy today’s build please take a moment to tap that like button and subscribe it’s completely free and you can always unsubscribe later if you change your mind which i hope you don’t all right let’s get into it starting with polish granite map out the

Base of the build it can be on a completely flat surface or can work on an incline the dimensions you see here won’t change today i’m building slightly into a minor hill so you’ll see some grass and dirt inside what will be bruno’s and abuela’s towers those pink and green sections as

Well as a bit of dirt below some of the back parts of the polished granite base this won’t affect the final design so if you’re also building on a slight incline you can leave that dirt there once the base is outlined we’re gonna head to the front section and start

Lifting up the walls using white concrete these walls are going to be six white concrete tall or seven blocks in total counting the polished granite base once the walls have been raised up we’re going to remove some blocks to make the doorway on the fourth block from the end remove five blocks up

Then six and back to five place brick walls in this opening lifting them up by four and placing a brick on top now place the three nether brick slabs in front of the doorway add a second layer in between the brick walls creating a step up and then on the

Inside place them on the ground creating a step down or up depends on where you’re going then grab some warp trap doors and cover the back of the brick walls coming back to the front create a 3×3 wall of trap doors in the middle of the doorway knocking out two and replacing

Those with a warp door then place three warped fences above the doorway to round out the archway add an upside down brick stair off of the bottom brick wall on each side stacking three brick walls on top then place a stair upside down stair slab and double slop repeat on the other

Side and we have ourselves the front entrance for a little added detail texture either side of the doorway with a mix of brick granite and polished granite then add a torch named torch underscore 3 underscore wall Now for the roof place spruce sphinx’s every other block across the front top these sphinxes with brick slabs wrapping around to the sides the roof will have a total of four layers of slabs and will eventually connect to our yellow front wall the bottom layer you see here wraps

Back a total of six slabs the second and third layer is wrap back five and the fourth layer wraps back four on this other side the bottom layer wraps back four slabs then three three again and finally the fourth layer wraps back two slabs Once you finish the roof hop down to the section immediately to the left and lift up the walls by a total of five white concrete blocks making these walls a total of six blocks high replace a couple of these blocks with some polished granite for texture then

Add red shutters above them leave a two block gap then add what i’m calling double decker shutters which is two rows of shutters stacked on top of each other place four oak trap doors above these double decker shutters rename oak saplings oak sapling underscore one underscore top and oak sapling

Underscore zero underscore wall topping off this section with a roof place spruce sphinxes on every other block this time place the first layer of brick slabs in front of the spruce fences and wrap around the left side this roof is three layers of slabs each wrapping back by three on the left side

You’ll see a hole in the right corner between the roofs add a white concrete in this gap and then head on over to our next section on the other side of the front and drinks here lift the walls up by five with a mixture of granite and polished granite

Texturing the existing base as well so the walls will be a total of six blocks tall On the third block in from the left place two magenta shutters skip block and place two more add crimson stairs above and below the shutters and place crimson trap doors on either side of the left window One block away from the corner of the front entering section place a spruce sphinx named spruce sphinx underscore a10 skip a block and place another top these with three acacia trap doors to make a little garden bench for the roof add spruce sphinx’s every other block with the first layer of

Brick slabs placed in front of the fences and wrapping around the right side now my replay mod has been doing this weird glitch occasionally where it doesn’t show some of the blocks i place they just straight up disappear in the recording footage luckily and thankfully this is the only

Time this happens in this video but here’s a picture of what the roof should look like it’ll also appear correctly in all feature clips it’s four layers of slabs wrapping around to the right by three on the first and second layer by two slabs on the third layer

And by one slab on the top layer with the roof done come over to this little corner bit and place a pink concrete create a 6×6 square that will act as the base of isabella’s tower then lift the walls to a total height of 12. At the top add a 13th layer that is a four by four square Now head back to the bottom place upside down birch stairs two blocks apart and add two rows of birch trap doors in line with the stairs top with birch fences place two crimson doors and two crimson trap doors surrounded by magenta concrete now head back up near the top of the

Tower and on the eighth block from the bottom of the tower place a line of crimson trap doors on the top part of that block repeat this on the right side and skip the back side on the left side we’re going to place the trap doors on the bottom part of the

Ninth block from the bottom of the tower so just a smidge above where we’ve been placing them this is making room for an eventual roof that will wrap under this side of trapdoors later in the video above the trapdoor trim add sections of light gray stained glass pings on all

Four sides of the tower Now head back down to the base of isabella’s tower on the second block back place cut sandstone two blocks high too deep and four wide on the back corner raise yellow concrete up by five creating a little archway and connecting back down to the other back corner of the cutscene stone section

Then add spruce fences in the gap extend the yellow wall forward and additional three blocks lifting this portion of the wall to a total of five blocks as well now extend the front of the wall by an additional 15 blocks This section of the wall will be six blocks low once the roof dips down the wall will become seven blocks low [Applause] once you reach the end of this wall add an additional column around the side and head back to the front on the third block from the right start a window by adding two magenta shutters outline the shutters with crimson stairs on each side and crimson trap doors on the top and bottom

On the fifth block from the left knock out a 4×4 opening and add a spruce fins railing finish out with two rows of magenta shutters overlapping each other by placing the item frames for the top shutters directly above the item frames for the bottom shutters now it’s time for my favorite part

Adding leaves but i noticed something was off with this section of reg shutters i should have only placed one shutter on the left so i’m going to fix that now shifting the double decker shutters over by one now there’s room for a little leaf pile in the corner Texture the roof of this section with mossy cobble slabs and go over to the front entrance section Place a drip stone on the ground adding a second on top to make it a larger drip stone this will act as the little trunk of the tree growing up the front of the house scatter birch and azalea leaves everywhere replacing some of the roof slabs with leaves you don’t have to

Follow me exactly here just make it look full and overgrown and you’re set Come down to the granite wall and add a leaf pile behind the bench then head up to isabella’s tower and cover her tower in pink birch leaves again you don’t have to follow me exactly but i do recommend concentrating most of the leaves at the top and

Draping them down the front quite a bit while only draping them down the other three sides by a little bit since there will eventually be other elements that connect into those three sides Do The other Hey Now that isabella’s tower is covered in pink blossoms we’re going to head on over to the left side of the build put a quick placeholder block on the yellow wall and extend a new section out by four and back a total of seven the front facing wall will be a height of

Eight and once you turn to the left side of the wall the height will change to seven on the top half of the lowest yellow concrete block place crimson slabs six wide and nine back creating a platform for a balcony place crimson fences around the edge

Lifting them up to a total of four in the corners of the balcony then add double decker reg shutters create the roof by placing brick slabs in front of the raised crimson fixes the roof will be three layers wrapping around on the left side and textured with mossy cobble slabs Once you’re done with the roof of the balcony go back down to the ground fill in the rest of the front wall with a mixture of yellow concrete and polished granite create a section protruding from the wall setting the stage for our rubble pile Coming around to the left side fill in the top two layers with a mixture of yellow concrete and polished granite then start compiling a huge rubble pile using polished granite full blocks stairs slabs and leaves Now let’s fill in the remainder of the yellow wall lifting up from the base to be even with the top of the wall we’ve already constructed Time to add one of the green sections on the third block from the corner counting the corner start the outline for the green section using lime green concrete it will be a 20 by nine rectangle lift the walls up to a total height of six lime green concrete blocks

The walls are rather boring right now so let’s add some details leaving a four block gap from the end place a lime shutter two cyan shutters and another lime shutter top the cyan shutters with lime awnings which are lime carpets renamed lime carpet underscore 0 continue to add windows on all four sides Now for the roof add spruce fences every other block with the first layer of slabs placed in front of the fences this roof will be five layers of only mossy cobble Swoosh Once the roof is complete we need to add the little chimney on the third roof layer place a lime concrete two bricks two more lime concrete an oak log named oak log underscore 2 and top with a waxed cut copper slab then begin our favorite part adding leaves

Texture this roof with flowering azalea leaves Go to the back of the yellow wall to begin adding ix roof like we’ve been doing add spruce banks as every other block and place the first layer of brick slabs in front of the fences this section of the roof will have four layers the bottom two layers

Will extend out to the right by two additional slabs past the wall Once we get to the left side of the wall add two spruce finches every other block until they can’t connect back to the yellow wall anymore at this point you’ll float two more spruce fences out past the wall this section of the roof has three layers Across the front continue to float single spruce fences until they naturally connect back to the front of the yellow wall place spruce sphinxes all the way along this front wall wrapping around and connecting to isabella’s tower this section of the roof will have five layers Okay one final look to see what we did over here in this section before texturing this roof with mossy cobble slabs Time to liven up this blank yellow wall start by knocking out two blocks and placing crimson trap doors inside add a magenta shutter on one side and a magenta awning on the top trap door place an upside down crimson stair under the window with a potted poppy on the windowsill

Then add more magenta shutters creating that overlapping effect by placing the item frames for the top shutters directly above the item frames for the bottom shutters the casita is surrounded by nature so let’s add more life to this wall place a drip stone and add a second drip stone

On top to create a larger drip stone like we did earlier then scatter birch and azalea leaves to create that overgrown effect On this left side we’re going to create a window similar to the one we just made on the back but wider knock out a 2×2 opening and add crimson trap doors inside place magenta shutters on either side of the window and magenta awnings on the top trap doors

Line the bottom of the window with four upside down crimson stairs placing a potted poppy and a potted dandelion on the windowsill add more overlapping magenta shutters then it’s time to create another tree this drip stone trunk will be three drip stones large and the leaves will

Intertwine with the leaves from the back wall With that the left side of this build is 100 complete let’s head over and start working on bruno’s tower for the first section of his tower we’re going to lift the walls to a total height of 9 lime concrete from ground level so in this case the outline i made

Is up on a little hill but i’m going to count 9 blocks starting from the ground rather than starting from the outline once these walls are raised extend the front right corner out by two additional blocks then raise a new section of walls by six we’re gonna put six mossy cobble

Walls on this extended end block and then in every corner except for one Here you’ll see we aren’t putting mossy cobble walls in the front left corner there will be more elements covering that corner later in the video so you won’t be able to see it once we’re done filling in this section of the wall add another column to the left of this mossy cobble wall

This strange shape is necessary i promise now we’re going to go back to a good old-fashioned square starting on top of the mossy cobble wall create a nine by nine square Fill in that little gap there with a row of lime concrete and then lift this new nine by nine section up by two more blocks Now for the tallest section we’re going to lift the walls up by a total of 12 blocks placing mossy cobble walls in all four corners Once you’re done with that big section add one more layer of lime concrete on top of the tower and place three brick slabs around each corner Then create this little stair-step pattern and repeat it on all four sides take pink wool and build a four high section behind the lime green wall add a plus shape emblem using iron bars and place spruce trap doors on the pink wool repeat these details on all four

Sides then start the roof by placing spruce fixes every other block this roof is five layers the last two being full mossy cobble blocks finish off the roof by texturing the bottom three layers with mossy cobblestops Now it’s time to build a bueller’s tower that will feature the magic candle burning in the window using magenta concrete lift the walls up by 20 blocks like with bruno’s tower we’re starting the count from the ground rather than from the outline that’s up on the hill

Now lift the walls up by an additional four blocks using stripped crimson logs On this back side we’re going to add a small window by knocking out two blocks and placing crimson stairs above and below the window and crimson trap doors on either side cover the opening with crimson trap doors too on the side of the tower we’re going to

Repeat this window design but as a 2×2 window Now for the front we’re going to do the exact same window design as the back the only difference is we’re going to add a shroom light on the ink side behind the bottom crimson trap door to enhance the glow of the candle then add the candle which is actually a

Torch named plain candles i know that this makes a set of three candles and not just one singular magical candle like in the movie but i don’t really like the way regular candles look in the mizuno’s texture and we’ll just pretend this gives the home more magic okay okay

Now for the roof place crimson fixes every other block and four layers of mossy cobble slabs then we’re done with the boilers tower It’s time to start working on the interior courtyard grab some more polished granite and create a line from the front granite wall back to bruno’s tower then across the back a total of 21 blocks and back up to the front fill in the entire outlined area with polished granite Now for the archways lift up seven polished granite blocks extending the top by six more blocks then connecting back to the ground creating an arch with a gap of five in the middle repeat this for a total of 3 arches down the left side now to make them look more arch-like add

A polished granite block in the upper corners with upside down polished granite stairs to round it out to brighten up the space place shroom legs into the arches between the lower upside down stairs repeat the arch pattern on the back with just two arches for the shroom legs on this side we’re

Going to embed the last two a block higher there’s a means to my madness trust me repeat the arch pattern on the right side with three arches connecting back to the front granite wall like we did on the back the shroom likes are going to be embedded in the arches

Between the upper upside down stairs now we’re gonna add some shroom legs two blocks underground covered by spruce trap doors in the corners around the front entrance lastly embed a temporary shroom light in the center of the floor in line with the front door in one block in front of the

Center of the side arches this is where the staircase we build later will end okay now we’re going to add the second floor walkways starting on the left side place a spruce plank on top of the arches add three additional planks on the back then one plank ink slab in the front For the front walkway we’re going to knock out a few of the cut sandstone blocks and connect back to the front wall then connect slabs over to the left walkway we just finished fill in the rest of this front walkway with planks Once you’re done there will be a couple of slabs in the walkway that you can replace with planks and then head to the back wall just like we did on the left walkway for the back walkway place a spruce plank on top of the arches add three additional

Planks to the back and one planking slab to the front Now for the right walkway we’re gonna place a spruce plank on top of the arches adding three additional planks to the back but this time we’re to also add three planks to the front then a slab The walkways are now complete but there are a few messy spots underneath that we’re going to fix with spruce stairs or spruce trap doors you’ll also see me add a few shroom likes into the walkways just to help with additional lighting Now let’s build the second floor walls starting on the right side by isabella’s tower we’re going to lift white concrete up to a total height of six when we reach the back wall the height will become seven on the back wall there will be one row of spruce planks behind

The white wall so make sure you don’t connect all the way back to the towers when you reach the left wall the height will become five and just like the back wall there will be one row of spruce planks behind the white wall with the walls complete we can now add

The madrigal family’s enchanted glowing doors start by knocking out a 3×3 opening place warp trap doors on either side then two stacks of shroom likes on the spruce plank row behind the opening add another shroom light in the top center of the doorway and place a jungle door underneath

Line the top of the doorway with warp trap doors and use warped fences to connect from the trap doors down to the floor now repeat this design around the second floor Using warp fences add a railing to the second floor walkway lift any wart fence pillars up to a height of five the only exceptions are the two middle pillars on the back walkway lift those to a height of six Grab some spruce planks and start extending a ceiling over the walkway covering every other line with spruce trap doors Once you reach the side wall run spruce planks covered with spruce trap doors all the way down the wall for the roof place brick slabs in front of the warped fence pillars and extend down to the back white wall this roof will be three layers once

You’re done head over to the right side wall like we just did on the left wall run spruce planks covered with spruce trap doors all the way down the right wall for the roof place brick slabs in front of the warp fence pillars and extend down to the back white wall

This roof will be six layers Connecting around to the front roof complete the four roof layers we started earlier in this video texture with mossy cobble slabs then go to the back wall Add spruce planks covered with spruce trap doors along the back wall starting in front of the warped fence pillars add brick slabs that will eventually connect into the left and right side roofs this roof is five layers with the fourth layer being two slabs deep now let’s pop back down and build the

Staircase knock out three wart fences and add three spruce slabs with upside down stairs below each of those slabs wrap five stairs from the front around to the right side and add another three upside down stairs underneath continuing to create an angle to the staircase repeat this pattern a couple more times

Then switch to a traditional straight stairway the rest of the way down Underneath what will be the final set of upside down stairs place shroom legs two blocks underground and cover with spruce trap doors we’re done with the interior for now let’s go finish up the final bit of exterior and we’ll be back to make this courtyard really come to life

Head over to the right side of the house and lift a wall up by seven yellow concrete blocks if some of the blossoms from isabella’s tower are in the way you can just build around them Fill in isabella’s tower base with spruce planks except for that very front row of pink concrete that part is vaguely visible from the outside so we don’t want to mess with it on the grass block bordering the polished granite floor build a white concrete wall once you pass isabella’s tower it should

Reach a total height of 14 blocks Place spruce sphinx’s every other block and add brick slabs in front of the fences this roof will have four layers with the top layer connecting back to the courtyard roof once you’re done texture with mossy cobble slabs Head back to the yellow wall we just built and placed spruce sphinx’s every other block this roof will also be four layers All exterior walls are officially complete but these new walls are looking a little sad so let’s add some elements to liven them up at the front of this yellow wall add a leaf pile on the ground then extend some of the blossoms from isabella’s tower to drape over the new roof

Hopping over to the side of the yellow wall add overlapping magenta shutters with oak saplings named oak sapling underscore 0 underscore wall and oak sapling underscore 3 underscore wall on either side create windows like the ones we made on the other side of the house knock out a 2×2 opening covering the

Opening with crimson trap doors place magenta shutters on either side a magenta awning on the top trapdoors and crimson stairs underneath the window the right window has a potted oak sapling and lily the left window has a potted dandelion and poppy place a drip stone on the ground and add

Two more on top to create a large drip stone scatter birch and azalea leaves up the wall like we did on other walls earlier in this video for the white wall add a few reg shutters placing oak sapling underscore zero underscore wall on either side add

A couple more rag shutters with oak trap doors underneath to make a windowsill add oak sapling underscore 3 underscore wall and pop the underscore zero underscore wall on either side of these shutters once you’re done head to the front of bruno’s and abuela’s towers we’re just finishing up the final bits

Of greenery on the exterior add a mixture of leaves and vines across abuelas and bruno’s towers mainly concentrating the greenery on bruno’s tower to get different vine shapes or if you want to play spines but don’t necessarily want them to grow all over the place you can name vines vines underscore zero one

Two or three and place them around the tower we’ll be using these name vines a lot the remainder of this video The others Hey Just for some added shape to the base of the towers i built a couple of small rubble piles at the back then continued placing leaves and vines because of course i did [Applause] Now it’s time to finish up the interior courtyard cover the base of this green section using spruce planks then hop back down to the ground and lift up our final wall using white concrete this wall is seven blocks tall and will be built on the grass blocks that border the polished granite floor

While i’m finishing up the wall i want to show you the reference photo i used for the interior courtyard design to give you an idea of what we’ll be doing get ready because we’re gonna go hard with leaves vines burns and flowers this this is my happy place

Once the wall is finished grab your pink birch leaves and line the archways and pink blossoms using them to also cover the shrimp likes repeat this pattern on the back side of the arches if you’d like now we’re going to create that wrap column effect we saw in the reference

Photo wrap each column with azalea bushes putting various fines on the blank spaces this is where the different vine shapes we talked about earlier come in handy just as a reminder i’m using binds that have been named vines underscore zero vines underscore one vines underscore two and vines underscore three On the right side of the arches we’re going to be incorporating torches named torch underscore three underscore wall place these underneath the shroom likes on the two center columns unlike the left arches for the right arches we’re going to place the pink and green leaves sporadically there’s no

Particular pattern just make sure a leaf block is covering each shroom light and then place them wherever your heart desires like the left arches wrap each column with azalea bushes placing vines in the blank spaces The back arches are going to be similar to the right arches place a torch underneath the shroom light on the center column and place your leaves and binds wherever you’d like Now we’re going to liven up the remainder of the first floor with leaves ferns and flowers there is no right or wrong way to do this just place items wherever you think they look best you’ll see me adding a few more shroom legs covered by spruce trap doors just for

Some additional lighting i cover the trapdoors with either leaves or tulip boxes to help them blend in just a reminder that the names of the different ferns and flowers you see me use are in the description below So With the first floor effectively covered in flowers we’ll head up to the second floor and start by wrapping the top of each warped fence pillar with pink birch leaves if a brick slab is in the way place the birch leaf directly below that slab then grab your different find shapes and

Place those going down each side of the pillars Now we’re going to cover these railings and binds like we saw in the reference photo place your different vine shapes on each of the warped fences and the front of each of the spruce slabs For the final finishing touches we’re going to hang some potted plants If you want to hang full ferns i used two barrier blocks stacked on top of the warp thanks railing place the item frame for the fern on top of the barrier block stack then added a chain to the ceiling and with that the courtyard is complete That’s it we now have the casita from encanto i hope you all enjoyed this video if you did don’t forget to give it a like and subscribe i appreciate all of your support and i’ll see you next time You