I think I see [Laughter] [Laughter] It hey guys hope you enjoyed that little preview of what we’re going to be making today we’re going to be making that boss fight as a full command block tutorial for you guys to add to your very own worlds and if you guys want there will Be a full fight scene of Me versus the Enderman boss at the end of the video anyways let’s get into the commands for all these commands we have a lot of different things going on each stack is going to kind of represent something different so this big area right here up First this is going to be representing the commands for the spawning in as you guys saw in the preview there’s almost a little cut scene of the Enderman screaming right in your face and spawning in that’s what this set of command right here does this set of Commands here if you guys saw during the fight there’s a bunch of endermites that would kind of spin in the air towards me that’s what this stack of commands right here is and then this stack right here if you guys saw during the fight there was this purple thing that would Occasionally follow me around that’s this attack that’s right here and then finally we have the second phase right here so we have some special sound effects that when we get the boss low enough he unlocks a new attack which is where he can give us blindness or Darkness effect as well as he gets a bunch of speed and strength and becomes just a really massive threat for a short period of time so like I said it’s going to it it is quite a lot of commands it’s going to be quite complicated so I’m Going to try and go slow but make sure you guys are following closely these commands that we have here are only for demonstrating and testing purposes so they just help me switch my game mode back and kill the boss just in case you guys are curious they’re not important For you guys uh this is just for me and for demonstrating so let’s do a quick demonstration of what all is actually going on here so similar to my SK skeleton Boss video we’re using this purple pearlescent Frog Light and throwing an Eye of Ender on top of this Pearlescent Frog Light what’s going to happen and I’ll show you guys the scoreboard you guys look on the side of the screen you guys can of course see my scoreboard what’s going to happen is that as soon as we throw the Eye of Ender on top of here it’s going to start Adding up pick it up before it starts but once it starts it’s going to make the Enderman spawn in we’re going to do some stuff with the camera command it’s going to make this little cut scene happen uh I do have to be in adventure mode or survival mode so that means the Enderman can get angry at me for the cuts scene to work all the way but he basically summons in and get some special attacks so I’ll do a quick little demonstration of what that looks like I’m so if I go ahead and summon this guy In back away you see it’s Hing up on the side Enderman does this little scream we get a camera shake and then the actual fight begins um I’m just going to kind of hop around try and survive while he does some of his other attacks so there right There you see his little endermite attacks basically someone some endermites that kind of spin around towards the player and they will explode if they get near the player get away going to wait for him to do his other Attack Just so you guys can see what it looks like if I live long Enough that is there it is so you see this little particle thing it’s going to be constantly did the under at the same time it’s going to be constantly following me for a long time and if I get too near it doesn’t a lot of damage I’m going to going try and Live all right so those are the two attacks and then once we get him down low enough he’s going to enter the second phase which is where he can give us blindness as well as giving him himself speed and strength it just turns him into a really dangerous Adversary as you can see these guys kind of just spir around out of control is really fun all right let’s get into the actual commands here guys said this first segment here it’s all about spawning him in as well as a little cut scene that Happens in fact we have a lot of of different camera commands so if you guys have never used camera commands you’ll get a little bit of an intro first thing we’re doing is we’re simply going to be doing this particle uh you can see it’s on a zero tick delay Doing this particle on any Eye of Ender that has this score that just means that the Ender eye is on top of aescent thing so there’s two particles that’s happening one’s the roar but there’s also see these little purple particles that’s what this command is right here Just gives a little bit more of an Enderman to it next up we’re getting into the real commands so this command is on a five tick delay what we’re saying is hey for anything named Eye of Ender if there’s a pearlescent frog light beneath it go ahead and start adding the score of Ender to the eye remember that’s what we’re seeing on the side of the screen that’s adding up next up we are executing this is a very similar thing except we’re going to be doing a different particle and since this is a chain off the five tily it’s not going To be happening nearly as much as the purple particle right here next up we’re going to be playing this random Fizz sound just to give a little bit of a sound effect that you guys heard then we’re going to be actually summoning in the Enderman so basically Once the Eye of Ender hits the score of 11 we’re going to summon an Enderman and we’re going to name him dragon’s hand now if you guys want to name him something different uh absolutely feel free to just make sure you name him the same thing throughout all the different Commands that have his name in it next up we’re going to giving the dragon’s hand resistance and also if you guys want to make it uh take longer to kill you can give it more resistance if you want to pick it have less time to kill give it Less resistance that’s up to you guys then we are going to basically if the dragon’s hand does not have the tag damaged we’re going to make the player do damage to it so this command basically makes it so as if the player attacked the Enderman this is to get the Enderman instantly aggressive so he’s going to start screaming as as soon as we do this little cut scene here the tag damaged is something we give it after the cut scene is over and that kind of basically says hey you don’t need to run the cut scene commands anymore you guys Will see this tag in a second just know that this is what’s making the Enderman aggressive at the nearest player and then we just add the tag damaged Prett pretty simple then we’re going to kill the I vender so that’s the first little chain command next up we’re just going to be Doing some simple things this is just going to be prepping the boss fight so what we’re going to be doing is for the dragon’s hand if it does not have the tag spawn so basically once it has the tag spawn then it no longer gives it the Health boost this is just a onetime health boost so we’re giving it for a very long duration uh four once again if you want to give it more Health go ahead and make this number higher you want to give it less Health make this number lower that’s going to give it extra Health the next command is going to heal it this is going to give it the actual Health boost gives you extra hearts but doesn’t actually make them Full Hearts they’re empty so this will heal it up to be full health with the new extra hearts and then we’re also going to be given The dragon’s hand uh a totem of undying similar to my last boss fight once the totem of undying bursts we’re going to detect that with commands and start the second phase and then finally this is uh the rest of it as well as the kind of The cut scene is what the majority of this is so what we’re going to be doing is adding the tag Ender for anything that has the tag spawn this is is how we’re going to time out the cut scene so we’re going to have the dragon’s hands be teleported in place We’re just going to kind of keep it in place so it can’t move around during the cut scene so basically you can see tag equals not spawn once the cut scene’s over it’s going to get the tag spawn which is my this will no longer take place now we’re going to start with Camera commands it’s kind of confusing if you guys have never used camera commands uh just copy what you see here don’t worry too much about it all we’re doing here is setting it so that any player who’s within 40 blocks is going to have their camera right in front of The face of the Enderman that way you get to actually see the screen and it’s kind of more intense then we’re doing a camera fade so what we’re doing is basically the camera the player of the camera is going to fade into black really quick and then Fade out it’s going to see the screen so this is going to happen when the Ender score is one so right when the cut scene starts we’re going to have the camera of the player basically go black for half a second and then come out of It and then we’re doing the same thing at the other end so the cut scene ends when Ender equals 40 so Ender equals 39 we’re going to do another fade that way it’s going to kind of black and then go back to the player’s normal perspective finally we’re going to to Camera clear so basically once it hits 40 we’re going to revert all the players cameras back to normal that way it’s not messed up and the player can get right into the boss fight then once the Ender is at Ender plus 40 we’re going to give it the tag Spawn then we’re just going to do a couple of other things this chain command is slightly out of order but it doesn’t matter that much for the way we have things set up what we’re doing here then is for once the cut scene starts we’re just going to give the camera Shake effect to the player to make it a little bit more dramatic then we’re also going to play a sound that way it sounds like the Enderman is screaming at the start of the fight then we’re going to do a tell raw so that as soon as the cut scene starts We’re going to have a little thing in chat that says the Wrath of the Dron is here this is optional if you guys want to add this to your own or not you’re also more than welcome to change the text as you see it here but this is just An optional thing you can do it makes things a little bit more dramatic for your cut scene then after that basically this is going to make it so that the player is just going to face the boss at the end of the cutscene that way as soon as it Transitions out of the cut scene the player’s ready to fight the boss it just makes it a little bit easier and a little bit smoother of a gameplay experience the next set of commands we have is for the first attack of the Enderman so basically we’re going to Give the tag might a which stands for might attack or endermite attack to anything that has the tag spawn so basically that’s the Enderman after it finished the cut scene this is only going to happen though on a 400 tick delay so that’s going to be happening every 20 seconds or So basically what we’re going to do is at anything with this tag we’re going to summon an endermite we’re going to name him missile then we’re going to damage the the Enderman with this tag from the nearest player so the reason we do this is that it will basically summon an Endermite and then it will teleport then we have the next command which is on a 15 tick delay it’s the same thing it’s going to summon an endermite and it’s going to teleport away using the damage command we’re basically tricking the enemy into thinking it getting attacked So that way it teleports now this is on a zero tich delay we have another summon command exactly the same on a 15 tick delay another damage command on a zero tick delay we have one more summon commands once again on a 15 tick delay then once Again on a zero tick delay the damage command then finally we’re going to be removing the tag from the endermite this finishes the attack off basically what we’re doing is once this attack starts the Enderman is basically going to spawn an endermite and then teleport out of The way spawn an endermite teleport out of the way spawn an endermite teleport out of the way it’s the little sequence so we are going to add the score Ender to anything named missile so that way we have a timer on the little endermites that we Have then at the very beginning of the life cycle of this endermite we’re just going to teleport itself still facing the nearest person then once it gets past the very first seconds of its existence it’s going to immediately start killing and by that we just mean is simply going to Be teleporting half a block forward at a time and ignore the volcano in the background anyways once the Ender score is over 120 we’re just going to kill it because we want to get rid of it that’s simple as that really um next up we’re Going to be doing this is so when the Ender might gets near a player it basically explodes so if there is a player within two blocks of the missile under Mite we’re just going to play the camera shoot explosion next up we’re going to be playing an explosion sound with the Exact same thing so if the missile is near a player within two blocks go ahead and make an explosion noise then we’re going to be doing the actual damage so basically if the missile is within two blocks of a player go ahead and damage that player and We’re going to make the source the actual Enderman boss himself additionally as with any damage command if you guys want to make the endermites do more damage go ahead and change this number make it higher you want them to do less make it lower finally we’re going to Simply kill The missile after it’s done the explosion this is just going to kill it so that way it’s basic basally like it exploded itself and that’s all that we have for the second attack so the next attack is going to be very similar what we’re doing is on a 760 tick delay which Makes it about every 40 a little less than 40 seconds I believe we’re going to be summoning an armor stand named tracker right after we summon it we’re going to give it invisibility that way you guys can’t see it putting this on a chain command with Zeroex then all we’re going to be doing is simply adding a timer to the tracker armor stand then we’re going to be making it slowly teleport forward facing the nearest player we’re going to give it a nice little particle effect this is going to give it more of an aura and Then we’re going to give it a second particle effect that gives it kind of the more central location I can actually summon that in if you guys want to see what I’m talking about stand tracker so it’s not invisible but you can see how there’s one kind of central Particle and then kind of an Oro particles that’s kind of what we’re doing here as you can see it’s just kind of following me through the air very slowly so that while this thing is on the ground you’re going to have to do your best to avoid it and keep moving or Else you’re going to take a lot of damage very quickly so now we get to the actual damage commands so basically if there’s a player within one and a half blocks of the armor standand we’re going to do two damage and we’re going to have the source be the Enderman next up we’re going to have this sound which is the Shuler teleport noise we’re just going to have this constantly this is just kind of like the slow background noise that tells you hey this thing is near you should probably move out of the way I’ll summon it again You guys can listen to it so basically when you hear that you probably want to start moving and then finally once the score is over 350 so once it’s been alive for a pretty long time we’re going to go ahead and kill it just so it’s out of the Way so this one’s going to be a pretty damaging pretty scary attack if you don’t move it’s going to do a lot of damage to you very quickly and keep in mind the Enderman can still be hitting you with endermites or just attacking you with its fists all while this thing Is tracking you down which makes for a really chaotic boss fight especially when we tie it in with the third attack but the third attack is something that’s only going to happen once the Enderman hits its second phase so first we need to be able to attack the second Phase so what we’re going to be doing here is we’re executing for anything that has the tag spawn so that means the Enderman that has gone through the cut scene but does not have the tag blind the tag blind is going to represent the second phase we’re checking does it have A totem with a quantity of zero in other words does it not have a totem of undying if so go ahead and throw this particle on the screen we’re going to be doing the exact same Checkers except we’re going to be saying you know if it doesn’t have a Total and it has these tags go ahead and make an Enderman Scream then we’re going to be healing so once again same Checkers does have the tags not have the tags it does have no totem we’re going to give it health boost and we’re going to give it instant Health this is going to be getting the Enderman back up to the same Health that We had at the beginning of the first phase finally we’re going to be giving it the tag blind this means hey we went through the transformation into the second phase we no longer need to do these commands again finally this is going to enter the second phase now that We’re in it we’re going to add a third attack that can happen at the same time as these other two attacks that already exist and simply on a 450 tick delay we’re going to give the players within 40 block radius Darkness for 17 seconds this is going to make it really scary Because you can barely see it all and the Enderman is throwing endermites at you it’s throwing these trackers at you and it’s teleporting around you all at the same time finally we’re also going to be giving it speed so that the whole time you’re blind this Enderman is going To be coming at you really really fast and it’s going to make it just a terrifying terrifying opponent to fight uh if you want to make it extra challenging you could also copy this command and give it strength as well and just make for a really terrifying final attack for your boss Fight but that’s it I hope you guys enjoyed found this informative um I really do enjoy making these boss fight videos they’re quite challenging but they’re really fun thing to do and I have been doing the last two on live stream I’ll probably make future ones on A live stream as well so yeah keep an eye for those live streams if you guys like these types of tutorials these boss fights they’re a little more complicated and they do take a lot more time to work so let me know in the comments if you Guys do want to see more of these uh cuz they are a lot of work but they’re really fun to make so I hope you guys want to see more of these if you guys have any questions feel free to leave them in the comments but as always You’re going to get a better response if you just ask your questions on our Discord which we’ll have a link in the description other than that enjoy the full full scene of me fighting this boss bye I think I see it yes it is it’s the shrine I’m ready for this Fight L Where Video Information
This video, titled ‘Custom Commands Enderman Boss! (Minecraft Bedrock Tutorial)’, was uploaded by Guppyduck on 2024-01-12 19:00:00. It has garnered 1058 views and 59 likes. The duration of the video is 00:19:54 or 1194 seconds.
This video will teach how to make your own unique boss fight perfect to be added to any world! The best part is that this enderman with custom attacks requires no mods and can be made with only command blocks! It is also a great scary boss to be added to a horror map!
Command Explanations: 0:42 Spawning Commands: 3:52 Endermite Attack: 9:58 Seeker Attack: 13:03 Second Phase: 15:20 Final Fight: 18:10
If you’re interested in Minecraft Bedrock commands, check out my discord! It’s a great place to find other people who love commands and get help from others! Discord: https://discord.gg/ykjsnwAfFH
Join this channel to get early access to my videos: https://www.youtube.com/channel/UCVWAWVotPjy39hPZMKtVKRg/join
Horror Music by Audionautix is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/