Ultimate Potion Brewer for Java & Bedrock! Minecraft

What’s up everybody it’s broken bones here and welcome to Broken Bedrock tutorials today we’re going to be showing you how to build the superior potion Brewer that works on Java Edition and Bedrock Edition my last potion Brewer only worked on bedrock that’s that one over there this is the tutorial

That we did previously and many of you in the Java Redstone Community have hit me up trying to figure out how to make this thing work in Java Redstone and so I’ve actually made a tutorial today and that’s going to be this thing which is the exact same tutorial that I’ve been

Helping you guys out oneone with I’ve been sending you guys screenshots and helping you guys many ways of trying to figure out how to make this work in Java Edition and if you’re a Bedrock Edition player then you’re probably going to want to watch that tutorial this one’s a

Little bit easier to build because we have to modify this one but this one doesn’t have very many changes the changes are very very minor so if you want to build this one you can but if you’re playing Bedrock Edition I recommend building that one and I’ll

Leave a link to that tutorial up in the top right hand corner but if you play on Java Edition then this is the one that you’re going to want and if you’re sitting there wondering why you’re playing Java Edition following a Bedrock tutorial well that’s because my tutorials have extra features that you

Can’t find on YouTube this potion Brewer has features that no other potion Brewer that I could find on YouTube has it has a semi-automatic mode and a fully automatic mode the Redstone out the back is fairly simple and it also has automatic water bottle filling on semi-automatic mode this thing will Brew

One batch of potions and on fully automatic mode it’ll brew and brew and Brew until your storage system is full and one of the coolest things you guys showed me which was actually brosi on Discord and saaku rare varies on YouTube I know I just boxed that name up but

Nonetheless you actually showed me how to bend this thing in 90° so you don’t have to have a big wide area like this you can actually take this and take the potion Brewer turn it 90° and you can take the modifiers and turn those 90° so

Now you have a smaller room which is actually pretty cool and I’ll show you how to do that in the tutorial so I want to give a big shout out to Bowski I really appreciate you showing me that design as I’ll be featuring it in today’s video so big shout out to you

There buddy I’m going to leave a link to his channel down in the description I also want to thank you guys in the Java Redstone Community for putting your trust and faith in me for guiding you guys through some of you guys’ Redstone issues I do know Java Redstone pretty

Well and I’m willing to help you guys oneon-one as you guys noticed I’ve helped Browski and several others one-on-one if you guys ever need help hit me down up in the comment section or go down in the description hit up any one of my social media links and I will

Message you oneon-one in a DM and I’ll make sure that you can get your Redstone build built so thank you for your trust and faith in me in that and I’d also like to thank everyone in the entire Redstone Community bedrock and Java combined because my videos are taking

Off and I’m almost monetized I’ve got 1,500 more watch hours to get so keep watching my videos keep smacking the like button if you’re new Please Subscribe and with that being said let’s go ahead and move on to the tutorial a material list will be down in the

Description to get things started you want to chunk align and sub chunk align your build and if you don’t know how to do that then go ahead and check out the link in the top right hand corner I have a tutorial on how to do that so go ahead

And watch that and then when you’re done with that you’re going to want to make sure that you chunk line your build for this portion of the potion Brewer it doesn’t matter where this hits inside the chunk but you’re going to want everything inside of the gold blocks to

Go ahead and fit inside of the chunk Border in some way shape or form you can have it up you can have it down it doesn’t really matter just as long as it’s inside a sub chunk and also inside of a chunk you can build it outside the chunk I’ve

Had it work but I’ve also had many issues uh with people having issues with chunk borders and stuff so I definitely recommend building it inside of a chunk if you can but I do know that most of you guys’ bases probably aren’t chunk align and you guys are going to be

Throwing this inside your base somewhere and so don’t worry if it’s not chunk lined you can throw it in pretty much almost anywhere this thing is pretty robust but I guarantee that you won’t have any problems if you build it inside of a chunk however as I said earlier I

Will help you guys if you guys are having issues and you built this in your base somewhere and it’s not working properly we can go ahead and get it working just hit me up down in the description on any of my social media links and I will help you one-onone to

Fix your build but if you plan on chunk aligning this then that means that any of the corners of the chunk can fit in any of the corners inside of this gold area so any of these Corner blocks just where right here where I’m placing these blocks can also be these blocks right

Here and right here so that way you can fit that pretty much anywhere inside of this chunk and it doesn’t really matter and there’s also four blocks underneath the floor right here so we have 1 2 3 three and four if you want to sub chunk

Align it like that and so we’re going to go ahead and get started with those measurements so you want to make sure that this gold block is somewhere inside that chunk and that you have four blocks underneath your floor so to make life easy on myself I’m going to start here

At the corner of my chunk I’m going to go 1 2 3 and four just like that then this is our floor level like this so we’re going to go and delete out all these temporary blocks just like this and then we’re going to count out to the

Side 24 more blocks so 25 in total including this one so that’s 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 15 16 17 18 19 20 21 22 23 24 25 just like that we’re going to make that two blocks thick at

Least that’s going to be our floor and then we’re going to come in one block and we’re going to do 23 blocks in the center just like this leaving the last block empty once you have your floor in it now it’s time for the facade so we’re

Going to come right here to this front corner block we’re going to place in a temporary block right there and put in a redstone lamp right there and you can break that block out we’re going to put a button on the front of that lamp we’re

Going to take a barrel we’re going to place that in right there right beside it we’re going to take a solid block and go ahead and place it on the side of that barrel with a button on its face then what we’re going to do is we’re

Going to go ahead and bring out a line of blocks all the way down to the end just like this to the very last one just like that and then we’re going to come one block in we’re going to put ourselves a lever we’re going to skip a

Block we’re going to put 1 2 3 four levers just like that then we’re going to skip another block and we’re going to put levers on across all of these faces just like so and then you can go ahead and flick that one back up cuz I flick

That one the next layer is going to look like this we’re going to come right on top of this redstone lamp with a block block right there and a block right there we’re going to put item frames on both of those and we’re going to take some Redstone lamps we’re going to place

Those above all of your levers just like this anywhere the lever stop we’re going to place an assault block and then continue with more Redstone lamps just like this and then one redstone lamp at the end and then what we’re going to do now is we’re going to take item frames

We’re going to put them on all of these Redstone lamps just like this and we’re going to continue across all of these just like so we’re going to come all the way down to the end next we’re going to take the items and put them in these

Frames so go ahead and grab your glass bottle that’s going to go in right here just like that we’re going to put blaze powder in this one a golden carrot a rabbit’s foot magma cream sugar a puffer fish glistening melon a spider’s eye gas tier blaze powder turtle shell Phantom

Membrane fermented spider eye and then for the modifiers we’re going to have Redstone Dust glowstone dust gunpowder and dragon’s breath and last but not least Nether wart once you have all of your ingredients Mark go ahead and come over to your Redstone lamps come behind them and you’re going to place in a

Temporary block right there and one up just like this I’m going to do one redstone lamp but you need to do this to all of them so go ahead and grab your Hopper you’re going to go and place a hopper into that temporary block and then break this one out then go ahead

And place in a dropper right there facing upwards that’s going to be your ingredient input like that and you can break that other temporary block out now we’re going to come into front and we’re going to place in a temporary block on that Hopper we’re going to take a trap

Door and place it on the bottom of that one if you want to use wooden trap doors you can just place a wooden trap door there and flop it up that’s no problem I like using iron trap doors because nobody can flick them so nobody can mess

With me and so I prefer to do that so what we’re going to do now is we’re going to place in another temporary block just like this two more and we’re going to take ourselves a piston just like this so I like to flip these up uh

By butting them so if you take a redstone block just like this we go just like that there we go now you can see that the trap door is in the upwards position so if we break that block out and power it now it’s going to stay in

The upwards position and we can break everything else out and now we’re going to go ahead and do that all the way across and once you have all your trap doors in place then go ahead and place a temporary block on top of your droppers right here and place in yourself a

Barrel just like that and you’re going to do that across all of these as well be sure to break out your temporary blocks in the back and now the front of it should be looking like this and once it is go ahead and take your blocks and

Go ahead and fill in these gaps right here all the way up to the top just like so and then go ahead and do that on this Edge as well so that way it’s matching the top up here over here on this side we’re going to go ahead and take

Ourselves a chest we’re going to put a double chest in right here just like so and then over here we’re going to take ourselves a dropper that’s going to be facing in this direction just like this and then over here we’re going to take ourselves a stair block on top of this

Chest right here go ahead and face in this direction put yourself a stair right there so way that chest can open but the facade on the front does look complete and then right here on top of this one we’re going to go and place ourselves in a barrel right here so

Let’s go and come on down here place a barrel on the side of that one facing forward just like so then we can come on top of here and place ourselves in a solid block just like that you can add one more solid block below that Barrel

Right there and then you’re going to come off to the side of this lamp here you’re going to place a temporary block down there and go ahead and bring this all all the way up to the top just like this and then you can come up one block

Above your barrels here and go ahead and bring this all the way across just like this is going to be your facad and that’s going to come all the way down here like this and if you want to pring this up here just like so break that out

And then now you got yourself a full facade right there take yourself some stairs and go and put them above your barrels just like this and that’ll make that look all complete except you’re going to want to make sure that all of your stairs are facing the right

Direction if you want to build your potion Brewer 90° then all you have to do is the exact same thing except turn the corners 90° just like this the area is going to be your potion Brewer area just like that that’s going to have a five block wide floor with two Extra

Spaces on this side just like that so put that right in the middle and then you’re going to want to make sure that that area is chunk aligned out the back if you’re going to be doing that and then what you’re going to do is you’re going to turn 90° and start your

Ingredients you have 12 different ingredients so this area of the floor is going to be 12 blocks wide like just like that then what we’re going to do over here is we’re going to turn 90° and these are going to be all your modifiers plus your Nether wart and that’s also

Another five block wide floor creating the facade and putting in all the things are going be the exact same as that one except for the fact that you’re going to have these pillars here wherever you have a gap and that’s going to be where you turn 90° and just so we’re on the

Same page our potion Brewer is only three blocks wide right here and it’s five blocks wide over here as you can see I’ve got two extra blocks there on the side and that’s so we can match the same width as this side so it’s all centered so now once you have your

Facade complete regardless if you’re building it like this or like this we’re going to come right around back and on this Barrel right here we’re going to place in a hopper going into the back of it just like this we’re going to take a

Potion and go ahead and H it on top just like that now what we need to do is on the side of this potion Brewer we’re going to go ahead and put in another Hopper so go and Crouch Place yourself a hopper coming down out of the bottom of

This chest right into the side of that potion Brewer then in the back right here we’re going to place another Hopper just right there and another Hopper off to the side right there then on top of this guy we’re going to place another Hopper right there just like this and

Then on the front of this dropper we’re going to go and grab ourselves the dispenser and go ahead and place it on there just like so and then Above This Hopper we’re going to go ahead and take ourselves one more Hopper place it going down into that one and we’re going to

Have a hopper line going across all of these droppers just like this and if you’re building at 90° then you’re going to want to make sure to come out to wherever your dropper line is and then wherever your dropper line is you’re going to make a 90° turn and make sure

Your Hoppers go on top of your droppers so if you’ve done yours 90° your Hopper line is going to look like this and if you’ve done it straight your Hopper Line’s going to look like that but regardless of how you’ve done it you’re going to go ahead and take a solid block

You’re going to cover your Hopper line and Bre sure that cover all of your Hoppers with solid blocks once all of your Hoppers are covered then go ahead and come underneath your Redstone lamps we’re going to come directly underneath here where you have a block down and a

Block out like this then go ahead and bring the all the way across underneath all of your Redstone lamps just like so just like that there we are all right and then right here coming down to this Edge we’re going to go ahead and place in ourselves a repeater just like that

You’re going to place a repeater anywhere your Redstone lamps are and then right here at the very end if you’re building the straight one you’re not going to put a repeater on this block you’re going to put a redstone dust on that block however if you’re

Building at 90° then you can go ahead and put yourself a repeater in once you have that complete if you built it straight you should have repeaters all the way in and Redstone Dust right here and then if you built it 90° you can put repeaters all the way across just like

This and once you have that done you’re going to go ahead and grab your sticky pistons you’re going to go ahead and place in a temporary block with a sticky piston facing up right in front of the repeaters you’re going to go and bring those sticky pistons all the way across

Just like this all the way to the very last bit and then if you’re building it in the 90° fashion you can leave that piston there if you’re building in the straight fashion like this you’re going to remove that sticky piston and placing yourself a regular piston facing up

Right there just like that on the bottom of that block all of these can stay in and then wherever you have a gap go ahead and break the temporary blocks right there once all of your Pistons are in go ahead and grab your blocks and place them on top of these Pistons just

Like this you’re going to place a block on top of all the sticky pistons just like this and then on top of the Piston right here if you’re building it in the straight fashion you’re going to place a piece of glass a block and then another

Piece of glass just like that and if you’re doing the straight one or the 90° one you can go ahead and just put blocks on this one you don’t have to worry about the glass block glass so once all your blocks are in it’s going to look

Like this if you bent it 90° and it’s going to look like this if you’re building it straight so once you have that in place you’re going to go ahead and place another line of blocks out here just like that go ahead and connect these up just like so and build it all

The way out to the last one go and come up by one more and this one’s going to go all the way across including the gaps so now that should look like this if you’re building it straight and it should look like this if you’re building

It 90° so now go ahead and take your repeater you’re going to go ahead and place a repeater in on all of these blocks just like this and you can leave them on one tick be sure to place those all in just like so all the way across

Just like I’m doing place it on the very last one there and then on this Stripe Right here go ahead and place in Redstone Dust all across these to connect all of these up and then of course you’re going to need a repeater go ahead and break out the Redstone Dust

Right here placeing yourself another repeater to connect that up if you’re building the straight version then you need to do this if you’re building it 90° like that then you don’t need to worry about this this is only for the straight version if you doing this then

You need to go ahead and break that Redstone bring it a block up put the Redstone back in there just like so then you’re going to place in a temporary block here put yourself in a slab in there just like so put yourself some redstone dust on top of that slab and

Break out the temporary block grab yourself a regular piston go ahead and look up at this block and place it facing down just like that above the glass once you have that done on the straight version your ingredient selection station is going to look just like this and on the bent version over

Here you’re going to have an ingredient selection section that looks like that next we’re going to work on the semi-automatic button which is this button right here right next to your barrel and so that’s the button that we’re going to work on and so we’re going to come right over here on the

Straight one which is right next to our Barrel so we’re going to come right around back here just like this come right next to your Barrel we’re going to come down underneath this block by a block just like that and break that one out goad and come down by another block

Right there and come out by a block in this Direction with a slab right there take redstone dust and go ahead and put redstone dust on all of these blocks just like so right out of this uh uh slab right here we’re going to go ahead

And place in a block just like that and a block out to the side just like so go ahead and place another Block in front of that one and placeing yourself a repeater right there placing yourself a bit of redstone dust just like so and then on the front of this block you’re

Going to place in another block just like this with a redstone torch on its face and that should line up right underneath that Hopper so as you can see if you built it on the 90° one it’s going to look just like this and if you

Built it on the straight one it looks pretty much exactly the same so both of these are going to be pretty much exactly the same from here on out it’s just that this circuit right here kind of makes it look a little bit different but nonetheless it goes right underneath

That circuit so you can see it over there on the 90° one and you can’t really see it on this one so it looks a little bit different but they’re exactly the same once you have that circuit in we’re going to come right over here to

This block with the torch on its face we’re going to place in a comparator just like that so anytime bottles go through this Hopper right here it’s going to power this comparator which is going to power that block which is going to continually deow that torch until all

The bottles have gone through and so that’s going to be the reset circuit right here and what what we need to do out of that one is we need to place in a sticky piston just like that with a Observer facing down right there and that’s going to go into a block so

Anytime that uh comparator dewers from being powered it’s going to go ahead and retract this piston and power this block which is going to send a redstone signal down to this bit of redstone down here just like that this is actually going to come on down here just like so and it’s

Going to come on down here like so again just like that and it’s going to go right into a block right there just like so so now what we need to do is we need to place in redstone dust on top of all of those blocks just like so then come

Around over here on this side of the slab right here you’re going to come right over here placing yourself an upwards facing piston just like that then you’re going to place in four solid blocks so go one two 3 and four just like that you’re going to place yourself

In a redstone block which is going to lock this Hopper which is going to stop the water bottles from going into the system right there and then we need to go ahead and place in ourselves a Observer just like this with a block on its face and that’s going to go ahead

And power a circuit that’s going to uh time this for only three water bottles go in so now to do that we need to go ahead and bring this out just like so we’re going to place a block up just like that go Ahad and bring this out by

Two more blocks and come up a block just like so so now what we need to do is we need to break this block out and that block out we can break this block out too and now we need to go ahead and place in a repeater right there and a

Repeater right there just like this put those on four ticks each just like so grab yourself some Redstone Dust placing yourself that right there and another block just like so and another block over here like that and then go ahead and grab yourself another repeater with

Four ticks on it just like this you should have 12 ticks in total going around in this area and then you’re going to grab yourself another regular piston and go ahead and place it on the front of this one facing down just like that on the 90° circuit it’s going to

Look just like this and now you can go ahead and test your system if you go ahead and power this piston right there and then deow you should see that it goes up and then it gets pushed back down same thing if you test it on the

Straight version you should be able to power this piston and then de power and you should see that that redstone block goes up and then comes right back down once you have that working we’re going to come right over here to this Hopper that’s going right into your potion

Brewer next thing we need to go ahead and open this guy up we need to go ahead and place in three items in these slots right there and then place the other 19 items right there so you should have 22 in total this is going to allow one

Ingredient at a time to go into your potion Brewer and once you have those in place then go ahead and place yourself in a block right in front of that Hopper just like so then place in two blocks right here a slab right in front of that

One and another block out here go ahead and grab yourself a comparator you’re going to place two comparators in here just like that and then go ahead and place in yourself some Redstone Dust right here and right there then grab yourself a sticky piston you’re want to

Come on down below place on a sticky piston right there with an observer on its face with the Red Dot facing back towards your build then we need to go ahead and place in a block right there and then another block right there and down one you should see that that’s

Right next to this Redstone and then we’re going to place in a repeater right here that goes on four ticks this is one of the changes we had to make from bedrock to Java because the budding of this piston and so we use double comparators and a slab right here with

Redstone just on top so this uh piston right here isn’t budded and then also too the way this works is that there’s only 19 items in here uh actually 22 items and then anytime 23 items goes in there this uh Redstone right here will get powered and it’ll power this uh

Piston right here which will power this repeater which will power that Redstone which will power this uh redstone torch which will turn it off and then all the potions inside the Brew will go through this because now they’ll be allowed to and this comparator will detect that

When they go in which will continue to the power this Redstone until all the bottles have gone through then it’ll allow this to turn back on and relock that hopper in which case it’s going to retract this piston right here because that’s going to become depowered which

Is going to power this Redstone which is going to send that redstone block up allowing your water bottles to go in and then in 12 ticks it’s going to go back down allowing only three water bottles to go in so next is the water circuit and if we’re building at 90° this is

What it’s going to look like too before before we get started with the water circuit it really should look pretty much identical to this and now what we need to do is we need to go ahead and build our water bottle circuit so what we’re going to do here is we’re going to

Place in a block right here just caddy Corner down below that Hopper we’re going to take a comparator we’re going to take a comparator output from there and then we’re going to stand on top of this Hopper right here come up right here to this block and Crouch Place

Yourself an observer right there like that go ahead and come up by one more and then come across on top of this dropper and placeing yourself another Observer right there just like that you’re going to place in yourself a bit of redstone dust right here which is

Going to power that dropper power that block which is also going to power that dropper right there this is actually should be a dispenser then what we need to do now is we need to go ahead and place in a block right here just like this just like that and then we’re going

To go ahead and place in a uh button right here just really quick and then we’re going to place in that water just like this get yourself a glass block and then go ahead and break that button and replace that so that way that doesn’t come out then go ahead and break this

Temporary block over here and replace that button right there so it’s right next to this dispenser then what we need to do is we need to go ahead and open up this dispenser we need to place in nine stacks of water bottles just like that and I recommend doing the same thing to

This dropper go ahead and fill this up with nine stacks of water bottles too this should be good for any amount of potions that you’re going to be Brewing on a server however if you need more you can refill it from the front right here

And so what we need to do now is we need to actually cycle this through which is why we have this button so now what we’re going to do is we’re going to hit this button right here that should give us some water bottles and as you can see

It’s going to cycle all the way through until we have some and then we should see that that comparator stays on and we have ourselves two water bottles right here if that’s not happening for you then go ahead and continue hitting this button until we have two water bottles

In there and then you should see that all of these are full over there and if you’re building this version you’re going to notice that you can see your dispenser but not your dropper because your dropper is only accessible from the front so come around front and make sure

To load that up with more glass bottles do the same with the dispenser in the back and then go ahead and hit your button and it should do the same thing it should go ahead and load it itself up until you have at least two water

Bottles that stay in here like that so once you’ve got that completed go ahead and come down here to your redstone lamp this is your semi-automatic and automatic mode and so we’re going to come down below this redstone lamp right here we’re going to come down a block

Just like this we’re going to come down another block just like that then we’re going to go ahead and place a block up just like this and that’s going to have a redstone torch on its face and two bits of redstone dust right here and then above this uh redstone torch we’re

Going to place in another block right there with a redstone torch on its face and you’re going to notice that this one has turned off what we need to do now is we need to take a dropper we’re going to place it on top of that redstone torch

Facing up just like this and then we’re going to take another dropper and place it on the front one of this one just like this facing in that direction then what we need to do is we need to actually go ahead and place in a couple temporary blocks let’s place in a

Temporary block right there and now we’re going to place a dropper facing in this direction just like that and then we’re going to place a hopper facing downwards right here this is going to be our r t flipflop and so what we’re going to do here is we’re actually going to go

Ahead and place a piece of stone in here just like this and you’re going to place it in this dropper if you’re on bedrock and you’re going to place it in this dropper if you’re on Java there’s a bit of a difference there between the two versions so if you’re on Java Edition

Make sure to place it in your top dropper if you’re on Bedrock then be sure to place it in the bottom one since I’m on Bedrock I’m going to be leaving in the bottom one but I’ll be showing you how to do it uh on is like Java as

Well so what we’re going to do now is we’re going to go ahead and take this block and go ahead and come off of that one so now we have this configuration just like this and then now we’re going to take ourselves a redstone comparator we’re going to place it on this block

Right there just like so and we’re going to go ahead and come up just like this okay now this is going to be just if you’re in if if you’re in bettered Rock condition your comparator is going to go down here which is why our our items

Right here so if we’re not in Bedrock and we’re playing on Java you’re going to put that right there and you’re going to go ahead and bring this block up here like this you’re going to leave that block down there because that torch and then we’re going to take this uh

Redstone comparator here and we’re going to add a bit of redstone dust right here to go ahead and toggle that torch so now in Java Edition that’s how you’re going to run this circuit so since I’m in Bedrock though I’m going to go ahead and revert this back so now I’ve reverted

Mine back and regardless if you’re in uh Java Edition or Bedrock Edition you should now be able to go ahead and hit your button right here and you should see that if you hit it the lamp stays on just like this and if you hit it again

The lamp turns off just like that and so therefore there you have a toggleable system because this is a t flip-flop so now we’re going to take an output from this which can be done from right here we’re going to place in a comparator right there that’s going to be

Regardless if you’re on Bedrock or Java so now once we have that in we’re going to place a block up in front of that comparator just like this with a redstone torch on the side which is going to power that piston so now as you can see that is powered so therefore

This is semi-automatic mode because there’s no way that this piston is going to interact with this circuit because that is the reset circuit so now what we’re going to do if we turn it on to fully automatic mode we can see that if we hit this that allows that piston to

Go go down and interact with that circuit so now that is no longer forced to be open so we’re going to go ahead and turn it back off and leave it on semi-automatic mode for now on the 90° version like this I actually just noticed that the facade in the front is

Actually messing with the Redstone in the back and I cannot figure out another way to power this so we’re actually going to have to deal with this we’re going actually have to bring this up here just like that and get rid of the facade on this side just like this so we

Can use these areas just like so go ahead and remove that all just like so and then go ahead and remove these blocks as well and there it’ll make it to where you can put this redstone torch right there to uh toggle that lamp on and off and if you’re on Java Edition

Then you need to do the same thing you’re going to bring this up here just like so you’re going to put your comparator there you’re going to take your button out of here and you’re going to go ahead and put that up in here just

Like so so that way that’s up there then uh you’re going to put that Redstone Dust right there so that way that’ll toggle that redstone torch that’s if you’re in Java edition if you’re in Bedrock Edition then you’re going to leave that comparator down here just

Like this and get rid of that redstone dust and then take your button and put it down here in this dropper once you have that complete then go ahead and test your circuit again go ahead and press this button and then if it turns on like this it should stay on and then

If you press it again it should turn back off just like that and so remember if you’re in Java Edition that comparator is going to be up with some Redstone Dust right there so once you have that done go ahead and come on top of this Hopper right here we’re going to

Crouch Place ourselves a block in it right there so that we no other items accidentally go in there and mess up our circuit and so now what we need to do is we need to come over here to this block which is right over here on this side if

You’re building a 90° side this is something that you have to do if you’re not building a 90° side then you’re good you just need to place in a block right there with these two uh repeaters right there right by your redstone block and your Observer you’re going to come down

By a block right here you’re going to go ahead and bring this out to the edge of your Redstone over here and connect these two Pathways up just like so then what we need to do is we need to go ahead and put Redstone Dust all the way

Across here just like so bring it all the way to here get yourself a repeater place it in right there right be uh right before that Redstone and connect that Redstone up to this circuit just like so once you’ve got that completed your Redstone out the back should look

Like this if you have the 90° version and if you’ve got the straight version your Redstone should look like this and that is pretty much it all done and dusted now we need to actually come to the front of the uh potion Brewer and actually work on this side but first we

Need to come right over here to these bottles we actually need a couple bottles out of here so you can actually come to this Hopper go and grab both of these bottles out of there you’re going to notice that it should fill back up go ahead and grab yourself another bottle

Now you have three and we’re going to come over here to this potion Brewer and we’re going to prime it up we’re going to go ahead and open this potion Brewer we’re going to need two Nether wart and we’re also going to put uh all three of

These water bottles in and we’re also going to need to grab ourselves some uh blaze powder and go ahead and grab all of your other ingredients for that matter and go ahead and start putting them in so go ahead and put your blaze powder in here and all the other

Ingredients where they go once all of your ingredients are loaded up go ahead and come back to this uh chest right here we need to actually grab one of these blaze powder right here because the hopper back there is locked so we actually need to put it right in here

Right into the uh potion Brewer itself that way that’ll Brew up this is going to go ahead and use one of those Nether wart which is going to go ahead and allow these to be primed up here and so what we’re going to do now is we’re

Going to just allow that to wait and once that finishes up you’re going to have three awkward potions these potions here are going to Prime the system they’re going to go into this Barrel when we want to have our first set of potions go through and that’s what’s

Going to trigger the system so we need to leave those in there and then when we’re done we can take those back out and we’re going to put them up here for next time so anytime you brew a new batch of potions you could use them and

They’ll be right up there for next time you can put them right in there so when you hit the button those are the first set of potions that go through to prime your system so now that we have all that done we need to go ahead and select a

Potion I think I’m going to go ahead and go with night vision so let’s go ahead and use some golden carrots we’ll go ahead and select some redstone dust that way it’s 8 minutes long it lasts extra long and then we’ll go ahead and use our

Nether wart cuz we also need Nether wart and so some of these potions uh most of our potions use Nether wart but there is like one or two that don’t require it so down in the description I’ve left you a list of all the potions and all the

Ingredients that go along with them so with that being said let’s go ahead and try our semi-automatic mode now we have all of our ingredients selected we should be able to press this button just like this and as you can see our potions are going to go into here and new water

Bottles are now coming in and our new potion is going to brew so let’s watch this Brew up now that that’s completed we can see that we have three night vision potions here and naturally you would want to take these out but that’s going to make

It to where there’s no primed bottles in the system which is why we made these so go ahead and take these back out if you want to take those out of your potion Brewer and then you just want to brew up one batch you can just put these back in

And it’ll go ahead and prime your system so if you want to do fully automatic mode and make yourself like a full Sher box or even more you can go ahead and hit this button right here and it’s going to go ahead and do the same thing

So as you can see our awkward potions are going to drop down and in and then new potions are going to start to uh make up right here let’s go ahead and see so there’s our water bottles going in new potions are starting to brew up

And what that’s going to do is it’s going to go ahead and fill this barrel all the way to the brim and then in the last set of potions those are going to stay in the hopper which will turn the system off so anytime potions get stuck

In the hopper the whole system’s going to stop and it’s not going to brew anything else and so uh if you want to you could leave these awkward potions in there and that’ll get you a full uh shulker box of whatever potion you’re you’re trying to do or full barrel and

If you want more than that then you can just take these out and you can go ahead and put these up here for next time and then this will go ahead and keep brewing and brewing and Brewing until you just leave them in there and it’ll stop

Producing it once it fills up again or you can just hit this button and it’ll Brew its last set of potions once you have the desired amount of potions you can take them out of the Brewer and you can take them out of the barrel just

Like this and then you can go ahead and take your uh awkward potions out of here here and go ahead and prime your system back up so it has some for next time so as you can see our potion Brewer should be fully functional and working and the

Only thing you should have to do now is load up more ingredients or water bottles and actually brew potions and for those of you that are hardcore and like to add Sher box loaders to everything I recommend doing the one wide tibles for all of your ingredients

You can add those right above here and drain them around into those barrels right there and I’ll leave a link for that tutorial up in the top right hand corner and also two right here at your potion collection system right here underneath that you could add a hopper

Output to there and have another Sher box loader right there and I’ll leave a link to those tutorials right in the top right hand corner that is going to be the ultimate shocker box loading showcase that’s going to show you all of my shocker box loaders and all of my

Shocker boox unloaders and regardless of how you built yours you can put those Sher box unloaders and loaders in pretty much everywhere and I just want to say building this in the tutorial was a really cool design I really enjoyed how this came together and I really like the

Way it looks I want to give a big shout out again to Browski for showing me this as I was helping him fix his potion Brewer in Java Edition he showed me how he put this little tweak on my potion Brewer so that’s really awesome so thanks again there dude for showing me

That I appreciate it and with that being said I hope you guys enjoyed today’s tutorial and if you guys did be sure to smack the like button for me and subscribe and I’ll be seeing you guys in the next tutorial take it easy everybody a