Before I get to playing I just like to say that this pack has been updated I’ve added a few mods if you’d like to see the changes the changelog is available on the pack page on curse again you can find the link to the pack in the Description as well as on the cursed launcher so my quarry and my dimension requires quite a bit of RF per tick and I’m sort of running out of power at the moment so I figure the focus of today’s video will be creating some sort of renewable source of energy which we Will be supplying through energetic generators and enderpearls I’m gonna need to get some sort of automatic InterPro generator going and I figured it’s about time we get the Enderman spawners up and running specifically the indriya spawners which shouldn’t be too hard to get together but there’s definitely quite a few steps That will need to be taken before we reach the final product so may as well get started I figured it would be a good idea to put a bunch of general use machines down here in this room may as well make the most to set of its as I can Okay awesome so I was in need of an alloy smelter because I need to craft up some solarium so that will take quite a bit okay I’ve got enough solarium and I’m going to use this to craft you the slicin spice machine which need to create the spawner That’ll do just nicely and it requires an axe and shears you okay nice so in our slicin splice if we put some solarium just like that silicone like that redstone and a zombie head it will begin crafting something it is a Z logic controller which is one More step closer to our spawner so I’m here at this skeleton spawner because for one I need a skeleton skull and – I need the spawner itself okay there is this skull the next if we just break this spawner here you’ll see we got a broken spawner I’m going to leave this Place immediately the reason I needed this skull is because I’m making a soul binder awesome okay perfect this is looking pretty nice down here I think so I saw a binder we’re not gonna be using this immediately but in preparation we’ll go ahead and toss the broken spawner in There what we need to do is we need to create a solve aisle and go capture either an Enderman or an inter mini I think I’m going to get inter minis because for one they require less RF per tick when spawning them and two they spawn those little pearl shards which You can craft into inner pearls as what as well on top of them dropping inter pearls so I need to create a soul vial as you can see here I’ve been crafting some energetic alloys preparing for the future then I believe 36 and other courts yeah Takes 12 in other chords to create the fused quartz which is what is used to craft the soul vial I’m just gonna steal one of my capacitors from upstairs speed up these machines down here okay here’s our so violet so now we need to go out and capture an indoor mini Okay I think I see one over yonder there he is leave just right click yeah there we go we now have an indoor mini Sol so go back toss this in the soul binder with the broken spawner and slowly but surely that skeleton spawner will gets converted into an indoor mini spawner Well the ender mini version of the broken spawner so while that’s going we need to create one anvil that’s a good a spot as any okay look at that we have a broken spawner that contains the soul of an indoor mini so next step we’ll combine some ender Pearls with some energetic alloys in the alloy smelter which yields the vibrant alloys craft those into vibrant crystals and we finally have the powered spawner so combine these two things in an anvil and look at that we have a powered indoor mini spawner it looks like I Don’t have enough XP so I’m gonna go kill some blazes real quick and I’ll be right back you guys totally forgot forgot we have all this solidified experience which I was saving for this exact purpose so we just go ahead and eat all these there we go perfect now we should Be able to graph this look at that powered in Germany spawner so believe it or not there’s still a few more things that are needed for this so first of all we need the environmental controller what’s cool about this is you can put any of these modules inside of It and in the area of effect that you specify inside the controller it will give that effect to whatever passive hostile or even yourself it’ll give that effect – whatever you specify so what I’m going to do is I’m going to create a node teleport module because I’m going to be killing the Ender minis with water and I really want to make sure they don’t teleport out of the water as I’m killing them we need to grab some blood from an Enderman with a syringe so actually I remember remember that first dimension that I created had a whole bunch of Enderman in it walking around everywhere so I’m gonna go ahead and create that again and it’s very easy all we have to do is click store and it will have the same ID is the first dimension that we ever created you so go ahead and build that quick And we are dialed in so let’s go hopefully there’s as many intermón there this time as there was last time I see a big herd of them this way you just punch them with the syringe to grab their blood or whatever you want to call it Okay I think we’re at a hundred percent so we can safely leave nice so gonna deconstruct this to mention immediately it requires way too much RF per tick okay there we go now no teleport module suite and then I’m gonna craft up a couple more power cells as well as power Cards then random things has this thing called an item collector which is sort of like a long-range hopper and then I’m actually going to craft the advanced version you I believe that this is everything that we need for this setup okay I’m just gonna link my power cell cards to the Same ID as these ones so they’re all linked and just right in the floor here we’ll put our environmental controller and put the note teleport module inside of it and set the radius to I guess 12 is fine and then the height we have to Take a note of what why level we’re on currently so right now we’re on 47 so I’ll just say height 47 to 57 should be all right and then we want to make sure that this only affects hostile mobs so if I set down one of my Power Cells here Put my card in it says it now requires 18 RF per tick to continue running and actually I’m going to reduce this about 47 to 52 that should be fine now I’ve just grabbed some buckets of water and I will just set them around in such A way that the in Germany’s will gets pushed into the middle of the room here okay I’m gonna say scratch that and we’re just going to create a giant pool of water as long as the inter minis are in the water we’ll be okay so there we go that’s that’s perfect and Then right above us will be our spawner the powered spawner and then actually above that I will put my Power Cell so currently I believe this is gonna require yeah 160 RF per tick which is fine that’s perfect and you can see that the spawner has a radius of 9 or not a Radius but a diameter of 9 so this room is just the perfect size for it so once that progress bar gets done 100% it will spawn I think for companies to which the spawner can be upgraded with the Enduro capacitors but you know what means we’ll Put one in there it will speed it up a little bit but I think the RF per tick it’s pushed up to 800 which is fine for now I am perfectly fine with keeping that running as is because soon we will be upgrading the power my ears cannot Take all the noise of the inner minis dying so let’s go ahead and create a sound muffler we just set this down right on the top here and it’s sort of muffles the sound as you would expect but I’m not done with this yet I still need to collect the inter pearls which Is why I made this advanced item collector so eventually we’ll be creating another room to set up all the intergenic stuff so I’m gonna dig underground a bit here so I’m gonna set the chest down right underneath and put the advanced item collector on top and I’ll just set the radius to 10 Everywhere we should now be collecting the under burrows awesome looks like we had one inter mini escape I think I’ve a way to solve that problem so if we smelt some glass will get thickened glass which can then be crafted into dark glass which will not let any light pass through Which we don’t really need that to be a thing but I just think the dark glass looks pretty cool so it was definitely a wise decision making the end of any spawner before we set up the generators because this setup which isn’t my own design I admit ice I stole it from Somebody but I’ve made a few little tweaks to it it requires tons of ender pearls so it’s good to crafting first of all we need for intergenic generators and seconds we’re going to need eight under monitors five redstone transmitters then I’ll just go ahead and make eight redstone receivers and then four sequencers Should be okay I’ve made four power cells along with four more power cell cards we’ve played with this before but this is the RF monitor then a logic gate will come into play for sure and then I almost forgot the most important parts of everything the pearl injector so I’m Going to start setting these things up and I will explain things a little bit while I’m building but just know that after I’m finished I will attempt to explain everything in a lot better detail so stick around till the end of the build and hopefully you’ll get a Better understanding there also keep in mind that this is not my design this design was recommended and built by the developer himself MC JT and I’ve made a few tweaks to the design myself but all in all this is his design so just know that we want to set everything Two blocks away from each other so I’m gonna set my power cells just in the ground like this set all of them to input and puts my already linked cards in them these are what are going to be pulling power from our energetic generators and then we just go ahead and Set all the generators right on top of the cells and then what you want to do is you want to link each intergenic generator together if you’re right click on one you’ll see what it’s linked to so what happens is every time a pearl is fired we want the generator that just Fired the pearl to say hey I just fired that pearl until the generator behind it’s that it needs to start charging the power that it has stored from that pearl so we can set up our inter monitors just like this redstone going to each well first of all I want to make sure Whatever I put redstone on is not in or so you just put redstone on a circle like this make sure these are set to send a redstone signal when a pearl has just been fired okay next I’m gonna set up kind of a wall just to set my Transmitters and receivers on so I’ll set up in term on others above these just like so and what these under monitors are going to be doing is saying that when a pearl has arrived at this generator send a signal back into the generator and fire the Pearl to the next Generator so immediately when it receives that pearl we wanted to stay in the generator as short a time as possible because that’s what makes these generate the most RF so we can do is we can set up our redstone transmitters just above these like so and then link Receiver to one of these in that signal going straight back into the same generator okay that’s that’s perfect we can remove these now so next we need to actually inject the pearls into the system the way that I’m going to do that is with the pearl injector so I’ll set Up my injector here and this will inject a pearl into this little system when it receives a redstone signal so what I’ll do is I want to I want to set a sequencer here because we want to make sure that these generators are in charging mode before we inject a pearl Into the system so I’ll set this to the seventh tick again it’s fine to be confused it really doesn’t make much sense to me even still but we’ll get there we’ll set this to once – when the redstone signal is received it will loop and restart if it receives another Signal let’s go ahead and set a transmitter up right over here against this wall and then we’ll link every single receiver to this transmitter set this here connected to the Pearl injector and we want to put another receiver connected to this intergenic generator then another one connected to This generator but we want to make sure that we add a sequencer here and set this one to the third tick so what will happen here is when we give a red Soudan signal to this transmitter it’ll say take this generator out of idle put this one or take this generator Out of idle put it in charging mode and then a few takes later put this one in charging mode because the generators benefit the further along the charging tik cycle it just generates more power that way but I am going to do is we made This RF monitor so I can just set it down like that and say monitor this power cell and say when we’ve got less than about 95% power send a redstone signal so this is where the logic gates gonna come in handy first of all let me Set down a sequencer here and set this to believe it’s loop 4 will set this to a 2 tick pulse what happens is it receives a redstone signal it will loop and it will restart completely when there is no signal and then when it receives a redstone signal after that it Will loop again so what I can do now is I can set down the logic gates will actually link a redstone receiver to any one of these transmitters here then I’ll just set it down right here and then make a sequencer going into this logic Gate but we want to extend that pulse to mmm something like that and most of us have wants to that should be fine I’m actually going to create one more receiver and one more transmitter because the way my room is cramped here I have to kind of leave everything super Compact so all right just like that once again well we need to make sure it’s the right direction set that to detect when the power is less than 95% and then I’ll put a transmitter there link the receiver and just attach it directly to this logic 8 ok learning from my mistakes Make sure you sets these inter monitors on top of the energetic energetic generators to purl arrived it’s the thing that I forgot to do so now we should be good toss some pearls in there you’ll see it’s kind of going in a big old circle there and what a pearl is Lost it starts up right back again and we’re pretty much wasting power right now but you know what I’ve got a surplus of ender pearls now so that’s good so I’m going to set this back to less than so what will happen now is when we’re ninety-five percent full in ourselves Start generating more power and look at that this pearl that one pearl is is still going around what’s happening here is what I’m talking about is every once in a while a pearl that is going in the system around and around we’ll eventually get lost no matter what Eventually it will get lost just like I did just then and this is cool it generates about 6,000 RF particular set up at least so next what we’ll do is we will create an RF Tools crafter and I’ll show you why here in a second then some More item conduits will come in handy as well one more interest and I have this little hole down here and I’m gonna set my crafter right underneath my power cell here power running into it what we can do here is I can tell this that’s with these little intro fragments here go Ahead and just craft those into inter pearls just like that and then we hit apply what we can do is we’ll set up an item conduits just like this tell this to inserts and set that to a high priority and whitelist these inter fragments here I put those in here and Set this to always active they’re now getting extracted and crafted into inter pearls which we can then extract again and then from that conduit line there we’ll just run everything all the way down here okay I ran out of conduits but we’re good now then set that to insert So that will be the last priority for the pearls all the fragments go in here and then all the crafted pearls go into the pearl injector and this is where the inter chest will come in handy we’ll just set this off to the side like here Set that to insert but make that the very last priority so when the Perl injector is all filled just start inserting pearls into our storage system so that is actually completely and totally automated RF generation with ender pearls so now I can finally go back into my five tools dimension and Set my quarry up once again maybe even expand it a little bit in this time we can set the tick delay something a little bit higher than it was before it looks like it’s keeping up and this is set to one tick delay look at that it’s keeping up just fine I Think the only limitation here is that the Power Cell can’t output more than five krf per tick and it’s currently using some of that for a lot of things but we can totally keep this thing running full speed without having to worry about power now Oh at least Running out of our non renewable power Oh another problem is chest space so I’m gonna have to slow this down no matter what something that I suggest to everybody is setting up just a general use power sell somewhere in your base so that you can easily charge up your things because I Find myself having a run all the way somewhere else to charge up my charged Porter and you know what there’s something that’s actually just now that I thought of that I’d like to make so in the sole binder we use the Enderman head silicon vibrant alloy and solarium just Toss that in there for now speed it up a bit let me get an indoor resonator with some electric steel we get a wireless charger so I’m just gonna set this somewhere back here what will happen is whenever we’re in the area that wireless charger will charge all of our items on Us that’s required RF so if I take my battery out you’ll see it’s charging my battery just from me not doing anything I’m just walking around and my battery is getting charged so that’s that’s very cool I’m gonna make one octet ik capacitor for my spawner I want to speed It up a little bit more this may be a little bit too fast I’ll leave that going like that for a while and see what happens looks to be perfectly fine actually so now that we have everything built and we know that everything is working perfectly I will attempt to explain this in better detail so first off the intergenic generators have four modes idle mode which is the mode that it is set in when it’s doing absolutely nothing charging mode which happens when it’s given a redstone signal while it’s in idle mode Holding mode which is what happens when the generator is actually holding a pearl and then there is pearl fired mode which when given a redstone signal when the generator is in holding mode that’s when the pearl fired mode happens so what’s happening here is we have this Generator going to that one that one to that one that one to that one and then all in a big old circle here the first thing I should mention here is that charging mode lasts for 10 ticks and that is the mode that actually generates The RF we want to make sure that that mode lasts for as long as possible so the way that we’re doing that is from this generator to that generator last 2 ticks when a pearl is injected into this generator and it knows that our pearl arrives then it sends a signal back into This generator itself it fires the Pearl and that takes one tick so from this generator to this generator is technically 3 ticks so 3 ticks 3 takes 3 ticks that’s nine ticks so the maximum amount of time that we can stay in charging mode at the last generator that Was set in charging mode is nine ticks so you know that’s that’s fine what’s happening here is the generator that lasts fires a pearl sins a redstone signal to the generator behind it which sets that generator into charging mode so this whole process is just going in a Big old circle here around and around but now I will try to explain how I Volta mated this process depending on how much power I have in my energy cells so again I’ve got an RF monitor under here connected to our multi block of energy cells set to emit A redstone signal when the power is less than 80 percent and I have that going into a redstone transmitter here that run stone transmitter is linked to this receiver here and then also I have this redstone receiver linked to this redstone transmitter which receives a pulse when a Pearl arrives at this Generator so this will receive a pulse every I think 12 ticks so what we want to do is I’m making sure that one of that short pulse is received here it’s going into this sequencer and lengthening that signal so we make sure we get a nice and long signal here so This logic gate here I have it set to the a side saying that when it receives a redstone signal and when the b-side doesn’t have a redstone signal emit a redstone signal so when this is not going when this is not already in the process of creating power and when the Power is less than 80% you are allowed to send a tiny little pulse to this transmitter which is linked to all of these receivers that receiver this one in this one okay so starting here that’s a pretty short pulse it’s two tick read send pulse so I have that going into a Sequencer here which is set to the seventh tick and then this one is set to just pulse immediately and then this one is set to the fourth tick I’m not sure if that’s completely optimal but it’s working for me see right now this isn’t running if this transmitter was to receive a Signal it would first send a signal to this generator which will put it into charging mode and then after four ticks it will go into this generator which will put it in charging mode and then after seven ticks fire that pearl into this generator and then immediately when That’s received fire the Pearl the next tick and then that’s will then set this into charging mode so the reason we don’t put another receiver unto this one is because it’s completely automated here we already know that this is going to be in charging mode no matter what the moment of pearl arrives Here or the moment that pearl is fired rather hopefully that was a concise and comprehensive explanation of energetic generators I still don’t quite understand them completely myself but I’ve done my best here and I’ve got it to work at least so I think really that’s all that matters in my book so You see here we have all these oars coming in all the time but I’m not really processing them at the moment I really wish I could get into that in this video but I think that’s gonna have to be separated into another video so next time we’ll get into the or processing But thank you so much for watching once again I really appreciate all the support and all the likes and the comments and all that sigh it really makes me happy replying in the comments and if you’ve seen I pretty much reply to every single comments so if you’d like to say Anything about the video please let me know if you’d like it if you didn’t like it but anyways thanks again and I’ll see you in the next video Video Information
This video, titled ‘Minecraft Modded 1.9.4 #10 – Endergenic Generator, Pearls, & Wireless Charging’, was uploaded by Booty Toast on 2016-07-01 04:26:26. It has garnered 4993 views and 113 likes. The duration of the video is 00:33:13 or 1993 seconds.
Delving into all things ender.
Pack Download: http://mods.curse.com/modpacks/minecraft/246834-toast-pack Mod List: http://modlister.com/user/BootyToast Twitter: https://twitter.com/toastacle Twitch: https://www.twitch.tv/bootytoast