Okay okay okay i know you guys have been asking for it and okay here it is sure whatever i don’t care anymore it’s the ghost it’s the two-tone scale ghost oh my god i’m not gonna make it through this i don’t think so next week we have the two-tone scale millennium falcon at 6 hours and 18 minutes of tutorial and look at the pure size of this lad he is fair bit bigger um i’m hoping because he’s symmetrical it’s going to take a little less time than the falcon and also the interior on this is limited of course you’re welcome to add your own Which a few people have said they’re gonna do but the only thing we have on this one is a very simple cockpit and that’s basically it so yes it’s not gonna be a super super super detailed tutorial like this one but it is going to be another long one i’m predicting Three to five hours i can’t give it a precise estimate on how long it will be just because of the pure size compared to that one the texture detail on the outside is comparable but obviously the lack of interior means that this one may only take three hours who knows Depends how fast we go through it but if you compare this one to the old model the falcon and the previous one the interior added three extra hours so yeah there’s that so hopefully three hours four hours maybe would be a good sort of middle point let’s say that for now but obviously If you’re watching this the video is out you can see the runtime so i may be really off with that let’s see what features this thing has so we’ve got a bubble tour on the top we’ve got the cockpits here i think these two are one in the Same i think this one is just kind of extended backwards a bit but i didn’t build anything there it’s kind of just filled in with fake glass but yeah the front cockpit does have detail the underside this is where the ramp would be on the front we’ve got this sort of middle section Where there’s two sets of landing gear now this version of the ghost is based on a mixture of the rogue one model and the rebels model so the rebels model would not have this side detailing which i have added in because the rogue one model does Some of the shaping is a bit more in line with the rogue one model as well such as this sort of carved out tail fin here whereas it would just be a straight line in the uh rebels model and what else what else is that i think this underside Here would have been more detailed if it was the rogue one mod but it’s that it is the rebels model there there’s no like phantom in the back so uh that will be a separate tutorial and the ghost is actually going to be one of the final tutorials in 1.12 alongside the Lambda class shuttle up there and the resistance x-wing which is just down there there may be one or two extras but after that point we will be moving forward into 1.15 for now until uh the new like shaders and uh amulet editor is finished but i do have To wait for amulet editor anyway for 1.15 i believe so yeah there is that so let’s get on to the video i’ve wasted enough time because this is going to be long enough as it is so let’s move on to the first section so yeah Okay i’m on a brand new fresh world here ready to start layer one of the ghost so for the first layer you are gonna need stone stone brick stairs steam slab stone brick slab anvil a temporary block this case will be yellow wool sign and lever we’re gonna first of all Do a 19 by 20 square so the 20 is going to be the length 19 is going to be the width so we’re going to start this off now one two three four five six seven eight nine ten eleven twelve 13 14 15 16 17 18 19 buy one two three That makes four i guess in total five six seven eight nine 10 11 12 13 14 15 16 17 18 19 and 20 there we go just like that you can throw that away now now we’re gonna go to the back left so this is obviously the 20 This is the length this is the width back left here we’re gonna do a stone brick slab top so bottom half of the next block up just there like that and then you’re gonna skip one and do one two three stone blocks upside down stone brick stairs there And then a lever is gonna go on there just there like so you’re going to take your stone brick stairs one two one facing that way one two one facing that way and then two signs one and two and again sign one and two there like that And then same thing again here another three stone two stairs one corner two stairs one corner and then this time it’s going to be a stone slab there and there upside down stone brick stairs there like that and then a lever on the back just there like so flick that forward Then we’re going to put an anvil here and here then take stone brick slabs one two three one two three and then again on this side one there and one there just like that and then just two signs oops there and there and again there and there And then if we find the center point which i’m gonna have to do on camera really quick should be uh let’s see one two three four five six seven eight nine one two three four five six seven eight nine so this is the center point here I’m gonna quickly mark that there we go like so and then you’re gonna do uh pretty much the same thing but it’s kind of half of it so we’re gonna skip a block do one there and then two three upside down stair and then upside down stair on the back Stone slab there don’t slap there that way two layers like that do that like that one that way and then on the front top half uh so say this again bottom half stain slab on the next block up that face is that way this one faces that way Angle in the middle one two three and four there like so and then two signs on either side and that’s gonna be the uh this the feet for the ghost obviously we’ve only got one on here one over there so we’re gonna mirror this over on camera really quickly So yeah let’s get into that so once you’ve done that that’s gonna be it for the first two layers so let’s move on to layer number three okay so we’re moving on to layer two and already things are heating up quite a bit here so layer two is actually quite not Difficult but it will take a little while so for the materials we need for this one we need wine concrete polish diorite quartz stairs stem bricks there’s anvil again with last layer sandstone stairs stone slab and then an iron trap door as well so the way we’re gonna measure this out Is because uh basically we we do some work here we do some work over there as well so what we’re gonna do is we’re starting on the feet and that will be our starting point same as last layer so two anvils on top of there like that And then you’re gonna just wanna build outwards by uh one block just there like so then take some stone bricks there’s do one two three four five and six just like that and you can delete this block so you’ve got six there currently and you’re just gonna do one extra on This side to make seven like so and again same on this side over here one two three four five six and seven just like that and then you’re gonna take your polish diorite for real this time we’re gonna do three here and then this is gonna wrap all the way Around just on the inside uh near this center section not on the outside just on the inside for now and then you’re just gonna do another four one two three four just like that and now you’re going to take your court stairs do one there one there so that should overhang by one Two stone brick ones upside down one two three four quartz ones upside down one steering brick one quartz and then one more stone brick this time at the corner just like that then do two quarts there one stone brick one quartz just like that okay then on the back Two more stone brick two more quarts just like so so yeah there we go that’s uh that bit sorted now we move over to here you’re gonna do another quartz one there like that then this time it’s gonna be uh stone brick ones upside down there and then this can Actually rotate inwards like that and join up there like so okay now you’re gonna do another quartz one here and that should kind of unlink that corner one which is fine that’s what we want then on the back here do a stem brick one that should unlink also And that’s again what we want i’m just gonna do three stem bricks there like so one quartz and then three stone bricks like so i’m just going to do that as a kind of measuring point because if the middle block of that stone brick that we just did here which is this one Lines up with the uh green or limewall we did earlier then that’s fine that’s exactly what we want to happen so yeah and that’s good and then moving to the front here just do another stone brick one and then take your sandstone ones and you’re just gonna do one two three Four and five for now obviously this is our center line here uh so i’m just gonna temporarily mark that there you go uh what i will do is do half and then i will do the other half in fast motion just so you can see what’s happening but It will speed up the clip a little bit so yeah uh anyway here we’re gonna take our white concrete now and you’re gonna do one two three four five six seven eight nine just like so and then with the court stairs one two three four five six seven eight and nine Okay and then with the white concrete again this time you’re gonna do six just like so and then take your quartz stairs do two there like that and then just two facing the opposite direction like so so you get that then do two white concrete here and then polish Diorite one two three and four white concrete one two three four one two three and four okay last little bit for this section take your court stairs again one two three four to the middle line same as before and then again there four and then four stone slabs Top half so you should get that okay then on the front here you’re going to take wherever that temporary block was well not tempered block middle line i suppose which is uh remember that green wool that we did one two and three obviously that one is Going over onto the other side so we’ll finish that half off in a minute what we’re gonna do now is move over to the front so to here do another anvil just like that and then you’re gonna take your stone brick slabs this time and do one there and one there And then take a quartz slab which is here and that’s just gonna go one there like that take your stone ones one two three four and then two there one two and then take your iron trap doors one two three four five two more quarts three stone slabs and then moving to the Front here one quartz one iron trap door three well two i guess for the minute but it will be three stone slabs in the middle and then one two three and then it’ll be four and five on the other side of the build so yes we have this so far which Is looking right to me what i will do off camera after we’ve done this is actually uh just check those measurements are correct before i continue uh just to make sure we we are good to go for the rest of the build because i don’t want To get to like layer 20 and it turns out i was uh one block wrong so yes i’ll do that off camera though and i’ll uh update you in the next layer um but i mean if i did it wrong this clip won’t even surface so um Yeah we’ll see about that anyway so i’m gonna mirror this over and then we can move on to layer number four so yes let’s get on to that all right so all been well that should be copied over exactly so uh the reason that took a little bit Longer in the speed up i don’t know if you noticed that or not um but it definitely did take longer the reason for that was because i didn’t use my reference uh to build that other half i actually did that from this half which is essentially what you guys would be doing I wanted to test to make sure that that works for you and i don’t know about you but it did work for me where i where we just built one half of it obviously on camera with narration and in the other half is just literally a mirror of it um And i know a few people have had problems with that i used to uh jump cut between doing one half and the other half obviously now i do the speed up and i just wanted to make sure that that did work and obviously i’ve just tested it and I did not struggle whatsoever obviously there’s a lot of flying between the two but you know it’s it’s it’s what you got to do to build it and it saves the video being like 10 hours long so so yeah i hope you guys can get behind that because that is uh The way it has to go um until maybe until we find a different way to do it but for now that is the ideal way which is just the speed up section so yes let’s move on to uh layer four anyway so on to that right so moving on to Layer four let’s go down to here and we’re gonna need white concrete polish diorite stone science terracotta gray concrete of course there’s stem bricks there’s cobblestone wall sea lantern and then i think one other material which we can’t fit on there but we’ll get to that when we uh when we Get to it so three stone there like so three white concrete uh two cyan terracotta two stone one sea lantern one polish diorite and that is the middle line so let’s go back down to here one white concrete there two cobblestone walls uh leave actually no forget it one polish die Right there one seed lightning one white concrete two cobblestone walls two white concrete and two more white concrete okay take a look at that i will go a little bit quicker in this one because it is purely just uh building blocks rather than any uh kind of upside down things So yeah so yeah just take a look at that and then we will carry on okay three polish die right one white concrete one sea lantern and then you will just leave a gap of two for now do three white concrete there polish diorite here and here obviously this is a middle line Again science terracotta there and then a sideways there there and i’ll do it on this side anyway just for the sake of it there as well that’s uh upside down stone brick also one of the material you will just need for now is yellow terracotta and we only need that Just for this bit here i think we might need it again on the next layer but um no worries so that goes there like so then on the front half over here cyan terracotta is going to go over that anvil just to fully seal that in and white concrete is Also going to go one two three four five one two three four one two three four and then two stone here and then do another white concrete there and another white concrete there polish diorite and then a uh what is that looks like an upside down stair so i’m just gonna put that There like that two upside down stairs here two stone brick ones and then two normal ones again quartz ones just like that and that is uh literally that half done so we’re gonna speed that up and we’ll do the other half just to finish that off so yeah let’s go Alright so once you’ve done that there is one last thing we need to do i completely forgot about the grey concrete for some reason uh so what we are going to do is just do two here behind a couple stone walls two there and then one two three four five six seven cover Uh that thing up completely there you go just like that that’s sorted and then on the front half here just three polish die right i don’t know why i forgot that but there you go that’s layer four done anyway so let’s move on to layer number five okay so if layered number Five i think it was yeah fine we’re going to keep the same materials just uh because there’s no point changing them out really we need most of the same things anyway you start while uh by doing three white concrete there two here and two here and then this literally Can just go all the way across just like that because it get covered up anyway and same on the back line here so i’m doing it on both halves for now just because it’s uh easy but there you go just like that two grey concrete on either side Oh you know what screw i’m gonna do the full layer on this one uh two cobblestone walls in either of these at the end of the day how much time i’m actually gonna save by uh speeding it up if i can just do it all now anyway if it was a difficult layer Of course i’d uh speed it up but this one is easy this one is quite easy i might say very easy it’s quite easy moving to the front uh this isn’t done but i want to move to the front now and just to get this Out of the way i’m gonna start by doing two polished eye right there three stone one polish die right here one stone one two and then a white concrete one two one stone two there three stone here one like that on the front two quart stairs one and two one and two A white concrete in the middle there and there polish die right times two and then a white concrete in the middle like that is fine okay back over to here now you’re gonna do a polished eye right there and there with a cyan in the middle and then a stone block There and there like so and then uh moving to the back over here find the middle line do two white concrete there like so three polish diorite one upside down stem bricks there and then you’re gonna take your quartz and stone slabs again it’s gonna be a quartz one And then two stone ones and a quartz one and then you’re gonna take a temporary block do one two three four five six seven eight nine ten eleven twelve thirteen fourteen and then do two stone and two quarts something just disconnected from my pc i don’t know if you heard that I have no idea what that was and then moving back over to the main body again you can take your quartz stairs do one two three and we will need our stand brick ones again two and then one two three four five and then two this can corn around two quarts there One stone quartz one two this can corn around like that and then three stem bricks one quartz one stone brick two quarts and then this one awkwardly is gonna be a sandstone one just there like that same again here let’s go all the way around again Two just so you can see how it’s done two one one there one two three this corners round one just like that i don’t think you understand how hard narrating this is just saying twos and ones all the time but there really isn’t much else i can do so there we go So that’s uh all mirrored around that’s nice that section there is going to be the start of the tail sort of section that goes under the engines this is going to be a mega tutorial um i i’m not sure if the time frame i said at the start of the video is going To be the uh final product but we’ll we will see anyway let’s move on to layer number six so in layer six we may as well keep the same materials again because we are gonna need a lot so we’re gonna start by doing just three here like that I think we are only gonna do half of the uh layer this time though so i will do this tail section first i’m gonna do a single uh white concrete then two stone one two three four five six just like that and then you’re gonna take your stone brick slabs this time and One’s going to go there one’s going to go there and we’ll do on the other side as well just for the sake of it just like that then two stone one polish diorite one white concrete one upside down stone bricks there two stone slabs are gonna go here And then one quartz and one stone again i’m gonna leave a gap of one two three and four and then you’re going to do a upside down stair there like that three polish die right two stone two white concrete upside down quartz there two quart slabs Two stone slabs as you can see the build is getting quite long now um i think it goes a tiny bit longer with the engines but that is the main length of the build so far anyway let’s go back down to here now do two stone there one uh white concrete three stone One two three four five uh let me just check that’s right one two three four yep five and then two and then this can just go all the way around actually up to there just like that one polish die right there one white and then one polish all right again take your Uh where are we cyan where is it there we go sam one two three four and then do one white concrete the yellow terracotta should line up with the ones here which hopefully you’ve got that right then this can just go to the middle like that Okay now on this side here you’re going to do two polish diorite two polished alright two stone on either side uh replace this one with a white concrete and then take your gray concrete again two four six eight ten twelve fourteen sixteen eighteen i think that’s right Yeah nine eight yeah okay and then stone slabs this just goes all the way across very simple just like that now uh the last thing is this front section here we actually join that up now uh so from this white concrete here do two stone one quartz two stone one quartz three stone Uh so four stone there two quarts and then five and then this will be a cyan just there so if you want to take a minute to look at that i’ll show you the entire thing there you go that’s what you’re gonna do okay And now let’s uh go to um we can do this bit first so we can do the uh inside of this um we’ll do the inside of this first just get that out of the way so it’s going to be a top half these are all top part slabs by the way any Section between here and here is going to be uh top half slabs apart from when we reach this section itself so uh saves me saying it every single time i place one so yeah so stone brick slabs here one two three obviously that will go four five because that’s a center line So yeah and then three quart slabs there and then one two three four one two three four just like that then do one two and three here one stone brick slab and then white that’s our core slabs one two three and four this will join up do three stone brick slabs here two Quarts and then three oh sorry two stone ones and then a stem break one okay do another quart slap just there like that then two stem brick ones are going to go just here one two three four one quartz one and sorry one stone brick one and then one quartz one And then just do two quarts here now i’m not expecting you to follow this i will show you an overhead view in a second for you to just copy that over uh because obviously all this is mega complicated so yeah one two three four five one two and then Two stone brick slabs one stone slab like so and that is everything uh for that middle bit obviously for this half anyway um so i’m going to give you an overhead view of what we have so far i will do it again when we’ve done the fill full build um so yeah Not the full build the full layer but yeah that’s what you should have uh pause here and just copy that because uh obviously i did narrate it but i don’t expect you to have uh followed that so yeah uh one white concrete here one stone one diorite and then one white Concrete in the middle three white concrete there one cyan one diorite two stone one white concrete and then two diorites just like that okay and that’s gonna do it for that half so uh i’m gonna move on to the other half now and then we will uh Get a quick overhead view of it all so you can see exactly what’s going on so yeah okay so i’m going to give you a quick overhead of that just one thing before we do that just do uh two just cover these bits up with that right Just while we’re there so this is the uh joining section between the front and the back again i did that from looking at the other half that i already built when i did the mirror over so obviously if i can do it you can definitely do it because i’m I’m not a good i’m not very good at copying stuff but if i can do it you can do it it’s fine but i’ll give you this overhead view so you’re welcome to screenshot or pause it whatever and then copy this bit over so yeah and again that’s all top half slabs There’s no stairs or anything for you to worry about so the top view will uh will suffice for that so yeah the rest is copped over anyway um so let’s move on to layer number seven onto that all right lay number seven so let’s go down to here grab our Same terracotta and we’re gonna do one two three four and then uh just cover these bits up basically it’s as simple as that and again here one two three four five just like so grab your white concrete you’re gonna do two there just like that and then three stone where’s my stone Where’s my stone i can’t find this down there we go three stone there like that one polished on side two white concrete one polished on the side three white concrete three uh polished am i saying underside this diorite how long have i been saying undersight for I said yeah but you know what it is i’m not gonna i’m gonna end the clip because of that uh but it’s die right polish diorama so yeah uh stone and then one polished dioranked uh three white concrete there and let me check them in the right place here yeah Two cyan one polished and then one stone two white concrete there and then this is gonna be uh three upside down stairs in the middle that’s the center line i will just be mirroring over on this layer again so yeah now we do have a little turret Here on the front which is uh nice that’s for the underside of the cockpit so at that part already which is uh quite promising i think they’ll do two slabs there and we’ll do it on the other side as well just for the sake of it uh two stone slabs in the middle Stone slab there quartz slab there all top half again then you’re gonna grab your stem brick stairs do one there facing each other then a polished underside this time in the middle and you’re just going to take uh two temporary blocks one there and one there If you’re in 1.15 or 1.13 i think even you will be able to just put those uh fence gates on there without any uh any temporary blocks and after a couple more tutorials i’ll be able to do that because i will be in 1.15 so that’s nice but yeah that’s the uh The turret basically on the on the front uh moving back to here now uh white concrete is gonna go all the way down here we’re gonna do one two three four five six seven eight nine ten just like that and then one two three polish diorite do Two stone here and then the rest is gonna be grey concrete same as what we did last layer so just uh up to that point there then a stone block here and a white concrete block there three polish die right there two stone slabs and then stone brick slabs All the way across there and two more stone slabs like that okay do two stone blocks here and then taking your uh stairs again are they quartz and also what can we replace here there we go get rid of the great concrete for now quartz stairs it’s going to be one two three Oops one two three and four there like that and then two stem brick ones three quartz ones two stem brick ones and then one more quartz just like so and then we’re going to take our gray concrete and i don’t know what i can replace here and i can replace the Quartz slab okay god my inventory is a mess now there we go grey concrete gonna do work to that two there two there two there so that’s a four so far and do a another two i think uh i can’t tell hang on i hope it’s Break the game one two three four okay so another two and then one two three there like that and then take your sten brick stairs there like so and then one two three and all there like that okay do a top half stem break slab there and you’re gonna take your white Concrete and start from this line just there we’re gonna do 18 two three four five six seven eight nine ten eleven twelve thirteen four fifteen eighteen yeah takes you right to there so that’s good then polish die right one two three and four one white concrete uh two polish diorite One stone block uh two white concrete one diorite one two three and four i want to say um it might be five let me check one two three four no it’s four okay uh all right where are we hang on i’m lost i’m genuinely lost i’m lost in my own build So it looks like a polished eye right there and then Okay one sec alright so quickly just on the previous layer just to finish this tail section off i made a tiny mistake uh just destroy that quartz and bring that one forward like that and then just put the quartz stairs on the back like so fixed there we go Now on this uh stone block here that’s on its own you’re gonna go out by one and do three stone blocks uh sorry stone slabs on either side just like that and then on the second to last uh block here you’re going to do a stem brick slab on either side that’s of That 18 long uh white concrete line we did and just do two of those on either side like so okay now come into here do uh two cyan terracotta there like so and then you’re gonna take a few unique blocks that we haven’t used uh before i don’t think it’s gonna be Is it cyan or is it blue i can’t tell i think i’m going to use a cyan for now and change it later if needs be cyan concrete and then dark prismarine together just like that two by two with your stone slabs top half 2 by 2 with your stone brick slabs top half just like that okay now once you have done that that is going to be it for that half of the layer so let’s move on to the other half and i’m going to do that again in fast motion so let’s go All right so that’s done so let’s just do one last quick thing before we move on uh otherwise i’m going to forget this which is just the uh slant for this layer uh so one there with your quartz stone brick quartz uh stone brick and then one quartz two stone brick And then three of course and again on this side one one one one and two one two three there we go sword right let’s move on to layer number eight we are making uh fairly good progress here as you can see so yeah on to layer number eight So for layer eight you may as well just keep the same materials we are gonna need like everything in this one so yeah i’m dreading it anyway we’re gonna start at the back because we can just work our way forwards uh we’re gonna start with the white concrete just there like so And then we’re gonna take our stone blocks and you’re gonna do one two three and four of those i think maybe five we’ll check one sec one two three four yeah five no worries five of those and then white concrete one two three and four this time oops Just like so and then a stone block a diorite two white concrete two diorite and then there is going to be a long line all the way to the front there but we’ll uh we’ll do that later so back here we actually start the bottom engine In the middle which is nice we can make start with that so we’re gonna start with a gray concrete one two three and four of those two stone brick slabs and then taking your stairs stone brick obviously one two corner one there corner one there they’re gone on this side just for the Uh for the sake of it it’s like that okay and then over here now we’re gonna go to this set of white concrete here the year four along i’m gonna do one two three four five six seven eight of those and i’m gonna do them again on This side actually i think those may be uh slabs yeah one two three four five six seven eight slabs like that one two three four five six seven eight slabs again then you take your stone slabs do one two three take your science thing clay where are you i can’t find you cyan Here you are three and three and then take your stem brick stairs and you’re gonna do a sideways one uh corner around and then corner this around and join up there so yeah and again on this side i’m just gonna do this now but when we get up there i’m going to do The left-hand side but for now i’ll do the right-hand side as well it’ll save us some time later so there we go just like that okay and then moving forward we’re gonna go to here and do white concrete we’re just gonna go all the way along For now all the way to there just like that because i know it does go about that far anyway and then with the gray concrete we’re gonna do uh one here and then two three four five i can’t even calculate that hang on one two three four five six seven eight Nine ten ten in total so five six seven eight nine ten i’m gonna do it again on this side for the sake of it again so ten like that and then one two three four five six seven there like so like that and then this can just join up like so With the white concrete okay all right and then from there three stem brick stairs upside down and one facing backwards like that and then over to here we need cobblestone walls wherever they are there we go a couple stone walls and you’re gonna do one two three and four And again here just like that take your white concrete this time i’m gonna do one two three one two three one two three one two on this last one it’s just gonna be a sea lantern just there like so okay take your these two blocks again so uh the cyan Concrete and the dark prismarine i’m gonna do uh two dark prismarine there two cyan concrete there like so and then where where are you cyan two there to that and then two stem brick slabs two stone slabs and then four stone slabs across okay and then go into here we’re going to take Polished andesite for once three there like so and then taking this cyan we’re gonna do one two one two one two one two one two one two all the way across just like that pretty self-explanatory there and then this line is gonna go one two three four all the way across and Then we’re gonna do two here two here and then two single ones like that and then come to here and do three go down by one across by one down by one and then cross by two so you should get that and then here one two three across by two just like so Okay and then one two three four five six seven eight and then this is going to be a stone slab here so brick slab sorry and then take your quartz one and we’re gonna do one two three and then another two cyan and then one two three four five like that And then again cyan just do uh one two three four one there as well then one here then here again skip two one two three four five six do a white concrete there and then here skip one and do a stain slab there then quartz slabs One two three four five six and then again here skip one two stone slabs there one two one two with the quartz slabs and then diagonal quartz slab there and just grab your polished iri and do three like so okay uh while we’re here again three there like that and then over to Here we’re just going gonna take our quartz stairs this time and we’re just gonna do uh one one and two there like that replace that uh slab that we put there before so it’s just gonna be like that okay right so back to here again we’re gonna take our dark prismarine now And we’re gonna do one two three four five six there and then fill this bit in here leave that block there two there one there and then two here and leave that block there we’re gonna grab our i think it’s black or gray terracotta and i’m gonna say Black now gray we’ll go gray grey terracotta one there and one there this gap is fine and then there’s a load of detail in here uh so we will do two white concrete here two stone brick stairs like that i’m going to take couple stone walls to that do a stair here Grab iron trap doors one there and one there grab a hmm what is that i think it’s a cauldron oddly enough that’s just gonna go there like so and that’s gonna do it for that detail i think so yeah yeah it’s a cauldron okay so What we’re going to do i’m going to take a quick break or a breather sort of just because this layer is huge and then we will uh return with the rest of it which is all that section around there and the front and uh yeah but at least this bit This bit’s done for now so that’s good um so yes i’ll be back in one second i may make it so you can’t even tell the transition happened but we’ll see okay all right so back to the build let’s carry on so we’re gonna grab stone and do two there like that And then uh grab your white concrete one there stone there one uh white concrete one stone again two two white concrete one stone white concrete there okay next up grab your white concrete again one there and then this time grab your uh gray concrete and we’re just gonna do That all the way across just like that up to there and then one more white concrete and grab two stone slabs two there and two there and then two stone brick slabs there and there and then this time it’s going to be two stone slabs outwards and again two stone slabs outwards Should leave you with three in the middle like that and then grab polish die right one there one there and then just bring that to be four in total with four stone in the middle and then grab your stone brick stairs wherever they are i’ve lost them again uh where are you There we go there’s 10 brick stairs it’s going to be three there facing towards the outside of the build so it looks like that okay so you’ve got that now and then we’re going to grab our sternbc stairs again and just wrap those around like so okay and then actually take those middle Three out that’s fine that’s fine so yeah four on either side now you can grab a weird material here which well not weird but strange for this build which is gonna be the dark oak wood stairs i’m gonna do uh three of those in total i guess Weirder in a minute though don’t worry three of those there as well grab your again i can’t tell if it’s black or gray i’m going to say black for this one black concrete and this time it’s going to be uh dark oak wood so wherever that is There we go dark coat wood one two three four five six just like that so yeah and then in this gap here uh again i can’t remember which way it goes i think it may be upside down stairs facing that way uh so yeah just like that It’s fine if not it’s not really a massive difference either way and then just a stone slab there on its own on this little lotion like that okay and then uh to this side now let’s keep going two white concrete two upside down quartz stairs uh Two cyan where are you there you go two cyan there like that two white concrete two polished diorite one white one stone one white one stone and then two white there like that uh cyan there one white two cyan one white two diorite one white three diorite one white two stone two white One diorite two white two cyan one polish diorite one white concrete and one quartz stair facing towards the front with a white concrete here and a stone block there and then three white concrete just to take us over the middle line like that okay and then do uh three grey concrete Three stone uh grab your stone slabs the one there there and a quartz there in the middle and then two iron trap doors just like so okay finally just grab your stem brick stairs do one there facing each other and we’ll do it again on the other side just for the sake of It there you go just like that okay and that is going to be that half of the build done from what i can see which is is good but now i have to copy that over so um yeah i’m gonna have to do that on camera Yeah okay let’s let’s go um i may i may stop a few times during the speed up just to uh kind of get my bearings because it is a lot to copy over so yeah let’s uh let’s get on to that and it’s gonna be like 20 seconds for you like five hours for me so All right okay so to me it looks like that mammoth of the layer is done um so yeah that’s that’s something that’s good it’s not like we’ve got like a hundred more to go now i think we got like maybe 15 more difficult layers something like that So yeah i’m not sure how long this is gonna go on for but yes that was layer number i forgot i think eight um but maybe nine i can’t remember okay anyway on to the next layer okay okay so for this next leg grab your green stained glass and we’re just gonna Do three here like this on top of those trap doors and then a stone bricks there’s one facing that way and that way so for this layer again it’s a pretty big one so i’m gonna do one half and uh for this one in particular and maybe the next few I may end up having to just do a jump cut because i don’t think i could actually mirror it from just memory which is what i’d have to do um and it would take way too long camera but i will give you all the uh references that you need to be able to Mirror this over so don’t worry about that so when we get to that point i’ll uh i’ll explain it a bit more so yeah let’s carry on grab your polished eye right and do one here and here and then a stone brush there in the middle Uh do three stone blocks there like so stem bricks there facing outwards there and there and then a cyan stained clay that’s gonna go here and here and then you’re gonna take your stone slabs do three two there and then take uh where is it my smooth sandstone One there one there stone bricks they’re facing towards the back in the middle and then take your smooth red sandstone one there and one there okay do two stone blocks here two stone blocks here one polished diorite and then one white concrete same again one there one There then take your stone brick stairs again this time and do one there and one facing that way again same as before just like that okay uh from there grab your white concrete again this time we’re just gonna carry on this left-hand side one white concrete here one stone block One white concrete one polish diorite and then one two three four five and six white concrete go out by one and then bring this all the way back just to above where that gap is like that okay take polish die right and do one two three four five six seven Eight nine ten eleven leave a gap of three and then do two more there like so okay grab your quart stairs do one there one stone brick one one quartz stair and then a quart slab and a stone slab just like that okay and then three top half stone slabs there like so So yeah once you got that take your quartz slabs do three one there on the front side stone brick ones one two one two three one there and then two stone slabs three stem slabs three stem slabs on this last one here that we did five polish diorite One there and then you’re gonna go to this block here do a stone one two one two down again and two there as well just like that okay and you’re gonna take polish die right again do two here like that move over to this side we’re gonna take our white concrete do two Three there two stone blocks and then one two three polish diorite two there like so and then you’re gonna take your stone again two here oops one polish diorite one stone one polish die right stone block there and there so you should have this by now If you need to pause go for it two polish die right here and then a diagonal one polish diorite and you’re gonna take your cyan one two three one two three four there like so and then grab your white concrete one more time here do one there one two three back by one Two there like that and then you grab yourself a sea lantern do one here and also one just there sorry replace that white concrete do another white concrete here like so okay just on this side again white concrete one two three four and then one two three two there And then one and two there one two three four five and one here and then once you’ve got that you’re gonna grab yourself yellow uh terracotta and yellow concrete so two different blocks with the yellow concrete you’re gonna do one down one to the side back by two To the side back by two to the side back by one and then all the way across to join up there like so and then with the yellow terracotta just one two and then just fill this in basically up to there like that okay going over to here you’re gonna take your Quartz stairs again and you’re gonna do two and then on the inside here one cyan one white concrete one polish diorite one cyan uh one what is that i don’t even know might be an upside down stair yeah upside down quartz stairs and where’s my stone brick ones There we go sternbrook stairs here like that so you should get this so far okay white concrete there and then take your polish die right and do one two three then slap there like that stone block just one there one white concrete one stone block one white concrete here And then take two gray concrete just like that then with your stone brick stairs you’re going to do one two stone slide there stone bricks there’s going to curve around just like that stone block there then you can grab yourself your dark oak wood stairs do three One stone there one is this a stair or a slab i can’t tell i can never tell i’m gonna say stair for now three stone there and one outwards two stone slabs on either side okay now what we’re gonna do is essentially mirror this this little bit here over to the other Side so i’m gonna do that now i won’t narrate as much so just like this one two three stone block there this one goes out same as before two stone slabs one white concrete two gray there one stone one white concrete i know this dialogue is probably incredibly boring but there Isn’t much else i can say three polish die right there like so one white concrete okay and that’s that’s fine so that’s uh how much we need to copy over from that side to that side so that’s good so yeah from there grab yourself your white concrete again And do one here and then two more there like that to make three should cover up that gap from before okay oh we got rain this because i don’t have optifine anymore so i can’t turn off permanently and you’re gonna do one two just like that take your white concrete again you’re Gonna do two here at two here like that and then one two three so you should get this so far and then again inside by one and then two there like that and then you’re gonna take your stone brick stairs here and one’s gonna go just there and one’s gonna go just there One’s going to go here and one’s going to go just there like so it should have four in total so far and you’re going to take your quartz stairs as well wherever they are here we go and one’s gonna go just there and one’s also just gonna go here like that okay Now we’re gonna take our let’s see where we can go from here uh we’ll go to this inside bit so take two polish diorite just like that and then behind it on the inside one one two three and then three to the left three inside again like that so you should get this Okay two more polish die right there like that and then you’re gonna take your yellow concrete just again over here and do two one two three it looks like you’re just a mess at the minute but it will come together at some point trust me white concrete one there one there polish diorite Two stone blocks here like so and then you’re gonna do a quartz there just like that and a stone brick stair is gonna go next to it just there okay and then white concrete again just here you’re gonna do one and two and then two again and then two outwards And grab your quarter stairs and you’re just gonna do one there like that and a stone bricks there just there like so okay and then where are we now i have lost my place completely that’s okay let’s carry on on the inside here so take your white concrete one more Time well not one more time we need that a lot more but two there and then four one two three four like that and then you’re gonna do five one two three four five and then five again and then just on this fifth one you’re Just going to do two there like that to sort of reach the middle point and then do a gray concrete in the middle like that okay gonna take your quartz stairs and we’re gonna do four here one two three and four like that and then with your cyan stained clay One two three and four there like so then with the white concrete you’re gonna do one two three four and then five more to make nine should join up to there like that okay take your quartz slabs and you’re just gonna do these all the way across here up to there like that Then with the white concrete again you’re gonna do one in by one over the gap bring this uh one two two here uh keep going let’s see how many that is until i’m trying to work it out two three four five looks like seven so four five six and seven yep so it Should cover the walls completely down by one and this goes across like that and covers that up and again you can just bring it back to there like so okay so next up uh we need to do the slabs on the outside so if you want to go back to here Take your quartz labs and do one two and three and a stone one there and then one two one two with the stone slabs these are all top ones by the way quartz ones one two three and two there of course ones again two two stone And then uh where are we at now two quarts are gonna go there one more quartz there and one stone and then one two three stone here like that uh do oh we also missed some uh stem brick stairs off here well i did anyway one stone brick stairs there and one Quartz there is going to go there like that okay and then two quart slabs just there like so one stone slab here and then one quart slab there like that now skip this yellow bit and we’re gonna go to here and do two stone slabs two quart slabs one stone slab and then Here i’m gonna do three well stick with two stone slabs for now and then two quartz ones this is uh incredibly hard by the way two quart slabs here i’m completely losing track of where i am at the minute uh one quart slab there and then one sorry stone one there Okay and then probably would have been easy to start from the other side to be honest do it yeah we’re gonna go to this end bit do a quartz one there two stone ones uh and a are we oh no sorry one polish diorite one uh quartz slab one Stone brick stairs upside down one quart stairs upside down and then two stone slabs here two quart slabs two stone slabs there like that now that should take us uh obviously up to the the proper uh slant there all we have to do now is just put a couple of Sandstone slabs in this gap which is gonna be uh one two three one two and one two three so yeah that should be our uh slant fully done for the back half um obviously we’ve got to fill that bit in but that’s fine we can do that in a second It’s just the same materials as we used here so we’re gonna need our cyan concrete our dark prismarine and our gray terracotta that was a little voice crack there that’s kind of embarrassing we’ll do the uh the sand uh concrete first get out of the way so two there And then go back by three just like that uh three here and then go back by three again just like so two there one and then three here like so to make four in total there three here three here and then one two three four five dark prismarine one two one two one Uh one two one two and then lastly one two three four five and then with the uh gray terracotta two here and uh where’s my other one i just won there as well okay so that’s uh that’s that bit done there’s a bit more for this layer i’m sorry if i sound Absolutely dead inside but that is what this build is doing to me uh we just have to fill this little gap in here so it’s gonna be a one two three four five six two there and also just do three here to cover that gap up i think on my actual reference Model that gap was still open so it’s a good thing i patched that up so yeah over to here is where we just do the engine so two there like so gray concrete two stone blocks take your stone brick stairs and we’re gonna do just two one there One that way three grey concrete here one there skip one actually now you don’t need to skip it it’s fine one two three let’s see how many there are until then one two three four six until just like that and then we need our stone brick slabs one is gonna go there Uh two are gonna go there like so and then with the stem brick stairs those are going to be uh one there two cornered and one there like that okay grab your sea lantern i’m just gonna put that here and then grab a orange stained glass for the engine just there like so Okay i think that’s uh that’s gonna be it for that half obviously i’m not to do the other half on camera um just because it’s it’s an absolute pain so um i’m going to give you overhead views of everything that we’ve done and you can copy that or you can go back and Mirror what we did or you can just do it from your own um judgment so i’m going to give you a view of this part here this is the engine obviously you can copy that over quite easily so yeah just like that that’s from the side This is the top of the back section this was the difficult bit really now let me take my hood off there we go and there we go and that’s it from the underside so just like that and this section from the underside and from the top this section and again this is the Underside not much to do on the underside of this one though and then just that bit there we already did that so that’s okay but mainly you can use your own judgment but to be fair the build is going quite quite well um we’ve still got a few more Layers before we reach the halfway point but after that it should be smooth sailing because there won’t be many upside down slabs or stairs and that is really what makes the build kind of hard on my part so yeah i’m going to copy this over and off camera And we will be back with the uh the next section so yeah all right so we’re gonna start the next layer everything’s copped over by the way um we’re gonna do three green stained glass there like that and then to the side and to the side again Just there like so we’re gonna grab our stone slabs and do three here like that and then you’re gonna take your stem brick stairs do one there one there and then a top half stem slab it in the middle uh quick fix from the previous layer just turn that s There sideways and that one there as well and again this side to there like so and then just add cobblestone walls here and here like that okay now you’re gonna take your polish die right do one there and one there and then taking your stone brick stairs you’re gonna do one Two three and uh is it three or four i can’t tell four i think yeah four and again one two three four just like that grab the smooth red sandstone there and there again and smooth sandstone there and there again same as before grab your dark prismarine you’re just Gonna do one single block there like that and that’s fine okay grab your stomach stairs again do one there and one there and those are just gonna be uh our rear seats for the cockpit the front ones will be added uh in a second we’re just gonna take lever and put one There and one there gonna leave it like that for now um because it will be uh added upon next layer so yeah grab your stone block and you can throw away the green stained glass for now the stone is going to go just there and then you’re going to take your gray concrete I am just grabbing the materials as we go because again there’s a lot in this layer so great concrete there got a diagonal do a stone block and then a white concrete and then a diagonal another white concrete there like that and then you’re gonna take quartz slabs And stone slabs you’re gonna do one stone there and then down by one forward by two then on this middle one one two oops uh and then four more to make seven in total so it should take you up to uh the same level as this one here then do one here And then skip one do two skip one and do two so you should get that okay grab yourself a iron bar and you’re gonna put that there obviously on the other side when we get to it and you can throw that away now okay grab yourself iron trap door one there one there We are very close to the uh the actual center line now which is nice so yeah um i i don’t know how long this video has gone for i think we’re on about one and a half hours maybe maybe one point seven at most so yeah and we’ll see how long it lasts Quartz slab there quartz slab there and there and then just another one here as well and then just do one two three four and five and finally just a stone slab there okay now grab your polish diorite and you’re gonna do one two and three white concrete Two stone there three stone there one two three white concrete here and take your science stain clay terracotta do it two by two then we’re gonna do a uh upside down stair here a white concrete there and then three more polish diorite like so okay two white concrete here one Two three four stone one cyan one white concrete two stone one uh white concrete one diorite one white concrete one diorite one white concrete one diorite so you should end up with three die right there three white concrete and then a cyan and then a white concrete Then you’re gonna do a diagonal white concrete stone wine concrete two quart stairs like so diagonal white concrete one two three stone this time two quart stairs and then diagonal one polished i right two and three stone slab there then here two stone blocks quartz lab and then here two grey concrete And then take your quart and of course there’s a dark wood stairs three there like so one stone block sideways there one stone block sideways there one stone block and then that’ll be three in total and you’re just going to take a normal stair like that and then put polished andesite this time There and there okay now moving on to the left hand side stone block there and there with stairs on either side of it like so uh two grey concrete are gonna go there like that with three dark wood stairs just like so and now this is where we get on to the Uh the massive long stretch again for this uh this sort of diagonal bit so yeah let’s uh start off on that i’m going to do it in a different take but we’ll be back in a second okay right so let’s kick off this back section i’m going to start with the full Blocks first and then we’ll move on to all the uh little slabs and stuff so we’re gonna start here with this gray concrete and we’re gonna do a white concrete there followed by a stone and then take your polish die right you’re gonna do three there like that Take your stone again and we’re gonna do uh one two and three little l shape there like so then white concrete just one polish diorite one two and three white concrete one and two polish diorite one two and three white concrete it’s gonna be uh where am i One and two and then diorite one two three white concrete one two three stone blocks one and two diorite one and two and then this time it’s going to be yellow concrete following this line here outwards one two one two nice and simple stone blocks one two three and one extra this time White concrete there polish diorite one two three four two white concrete one two three nine right two white concrete and then one polish die right there like so and just another stone block okay now we’re going to start with our quartz stairs the outside so we’re going to do two here Uh one there one here uh two there one here one there two here one there and one there and that’s all the quartz stairs we need and let’s do our stone brick ones so the first one is going to be just here so just there yet And then you’re gonna do one here one there and there and that’s it that’s it for the uh for the stairs so we can throw those away and we just need our uh quartz and our stone slabs we’re gonna do uh all the way at this end stone one there And a am i in the right place here now quartz one there stone one there two quarts two stone do two quarts here one quartz there and one stone here do three quarts there like so and then two stone and here two quarts stone and quartz and then here one two Two in stone and here a little l shape with the quartz and then with the stone i’ve completely lost my place staying there and then yeah i’m fully lost now where am i where am i right okay just another another stone one there there we go fixed two stone and then One there and a quartz block just like that then two quarts one stone like so and another quartz slab there and now quartz quartz stone slab in the middle um and then two stone ones there okay and then two quartz ones one quartz there and a stone on the right And then this one two quarts one quarts on the left stone on the right again two quarts here two stone one uh stone there and then two quarts oh my god that was horrible [Laughter] but yeah that’s uh that’s the slant done from what i can see let me just double check Yeah it looks about right to me so that is um the outside done we just have to do the engine that’s not not too hard let’s go to the inside here take our uh sand stained clay do one two three four stone block one two and then a white concrete there gonna grab Our quartz and stone slab at quartz there stone on the inside just like that and then over to the engine grab our gray concrete do one two three four and do two there in the middle and then another one two three and four this one goes outwards um forward by three Just cover up those stairs basically and then take your cobblestone walls do two here two great concrete on the inside and a cobblestone wall is just gonna go there like so grab our sea lantern and our orange stained glass again that’s just going to go there like so Okay now once you’ve done that we’re going to do the other half again as with last layer i’m going to do this off camera because it does take a long time but again i’m going to give you the reference so this is the engine area okay this is the u back How it should look this is the top side of the rear section okay this is the underside of the rear section okay top side of this and front of this top side of this one front side of that and then the side view of that one remember just this point forward is slabs You got that there and that should be fine so yeah we’re going to mirror that over and then we’ll move on to the next layer so on to that okay so for this next layer we’re going to go to here at these uh levers and we’re going to put a stair There and it’s there there and then take another lever here and just we’re going to put it on the upside at the bottom of this stair basically just like that and make sure it’s facing the right way and then just flip that flip that and it should join up with the Other one just nicely like so okay so that’s out of the way let’s grab a wooden trap door and we’re just going to put that there and also there as well and we’ll do another one here and here so that’s going to be the chairs for the uh the pilots And the uh the people sat behind them grab your smooth sandstone again two more like that and then dark prismarine and then this time instead of the smooth red we’re going to use stone on either side like that and then we’re going to take our gray concrete do two here And two here stone block in the middle and then two more gray concrete just like that and take the cobblestone walls you’re gonna do one here and one here and then do a polished diorite just there like so now grab a polished andesite and you’re gonna do two just there like that Grab your sand stain clay there we go one’s going to go just there and you’re going to take another lever put that just there on there like so okay then you’re gonna take your green stained glass again do one there one in the middle and then a cobblestone wall on the uh Side there like so we’ll do on the other side as well just for the sake of it so yeah you can see that’s uh almost the center line of the cockpit now so yeah might even be the center line i’m not sure i can’t remember how how tall this is but yeah Um so that might be the center of the cockpit i don’t know we’ll see um anyway from there grab your white concrete we’re gonna do two here and then go a diagonal and do one two three four well basically just all the way across there like that Just to there then you’re gonna do two polish die right here two polish diorite here as well cobblestone wall there cobblestone wall there two stone on either of those then a stone slab here and here and take a iron trap door and you’re gonna do one two and three there like that okay Do another white concrete here and then diagonal the white concrete and then you’re gonna do stone one two three five white concrete polish diorite cyan stained clay there we go die right again two white concrete one stone one white concrete one cyan one stone two cyan two stone should take you right Up to the end there okay now we’re gonna do this uh in sort of sideways layers because this is the layer that we actually um essentially do this uh slanty bit on this side obviously to finish that shape off so we’re gonna do it in row by row So take stone we’re gonna do one two three cyan two white concrete diorite and then this is gonna be quartz slabs one two three and four and then this is gonna be a stone brick slab one there and then quartz and then stone and quartz one and two Stone again one there and then one more quartz two stone here and then where am i at where am i hang on yeah one two three with the quartz and then just one there as well okay next section over here two diorite one stone uh two white concrete Ah there we go where am i i’ve lost my place now um okay i’m on that stone block and then two one two three quart slabs two stone slabs one stone brick one should be in the same line as that one before three stone ones three quartz ones One stone one and then two quartz ones just there okay should leave a two two gap there like so next one white concrete polish diorite two stone and then this is going to be a slab quartz and then this time it’s going to be six stain slabs Should take you to the same layer as those ones and then this time it’s gonna be four quart slabs two stone slabs two quart slabs should get that okay this time two white concrete and then instantly to the slabs one stone slab one quartz uh two stone one quartz And then two stone brick one quartz one stone brick one quartz three stem brick and then two quarts again keeping that uh two two block diagonal like so okay next up down to here take our polish die right i’m gonna do two this time going back by that one block there and Then it’s gonna be instantly to the slabs two quartz ones stone just one two quarts just one stone one quartz and then a stone brick slab two quarts two stone brick one quartz two stone brick so this time it is a uh just a single block left over that is correct Don’t worry about that next layer it’s gonna be uh two two stairs this time so we’re gonna take our uh let’s see if i can see it from here i think i can it looks like a quartz and a stone brick so it’s gonna be the stone brick one First and then the quartz i suppose it doesn’t really matter in the grand scheme of things but yeah and then uh we’re gonna do ah start two layers at once there and oh well i’m gonna start with this first one which is the stem brick one do a single stone brick slab There and then a quartz and then two stone slabs and then three quarts then one stone slab here one quartz two stone bricks and then three quarts should leave you with two on this one here with the quartz there stone brick quartz two stone slabs one quartz this time we’re going to take Sandstone slabs as well so one stand stem slab there two quartz slabs one stone brick slab you should be getting a diagonal here as well and just make sure you’re getting that one quartz one stone brick and then one quartz okay making good progress here don’t worry now diagonal again one white concrete There and we will just do this the blocks here so two polished diorite one white concrete uh two upside down stairs these are gonna be stone brick one two and then diagonal again one two three polish diorite okay so let’s get back to here now all right so we’re gonna start off with Stone brick slabs one there one quartz lab one stone brick one stone slab one quartz one stone this is getting really boring i know i’m sorry but yeah stem brick one there quartz one here and a stone one there and a quart slab again that one should just be a single Single diagonal so yeah and down to this one here stone brick one again um in fact we could do two two layers at once here so two stone bricks two by two with your stone two by two with your quartz and then two stone here one quartz one stone And then two quarts like that sandstone one there quartz one there there we go saved a bit of time all right next up quartz stone brick one two quartz one stone brick one two quarts again just a signal diagonal there and then this one do two layers at once again two stone Uh one quartz one stone brick and then one stone brick one quartz and then just two quarts there like so then finally this bit two quarts two stone one course there okay now moving on to the inside of this bit here we’re going to take our stone block Do one there white concrete block one there and then grab our stone slab one here and then two top half quartz slabs and you’re gonna take your black terracotta do one there like so stone block here and then one two three four five replace the middle one with a polished Undecy and then grab your cobblestone walls again and we’re just gonna do one and two there and one there and one there stone block here again and then this time we have to go all the way back over that and to uh do another layer of of this slope so yeah that’s that’s Always fun so i’m gonna do that in a different take so i’ll be back in a second all right so starting off the back half of this uh incredibly fun tutorial now we’re going to do two stone blocks there and then three polish dye right here like so take a Stone slab and then two quart slabs here just like that very nice grab white concrete one there stone block there like so and then at a diagonal i’m just gonna take our white concrete dude two diagonal stone we’re gonna do two like that and then diagonal again uh we’re gonna do Let’s see white concrete well not diagonal do one do one uh there and then and then another diagonal here with the white concrete and then you’re gonna do a polished eye right there diagonal again just one there like so polished diorite diagonal again do two diagonal again do a polish diorite Diagonal do two stone diagonal do one white concrete and polished stone white uh diagonal just one like so a diagonal two uh one quartz there and one stone block and again one not quarter white concrete and stone block and then final diagonal here is going to be a polish diorite white concrete And then actually a quartz stair upside down like that and then two normal ones like so i think if i’ve done that right i should have i’m gonna check in a minute but yeah anyway so that’s that for that bit um anyway moving on from there we’re going to take our Cyan do one there and our white concrete do one there and then from there we’re just gonna where was it where was my stem bricks there there we go stone bricks there upside down one two three four just do five for now actually six is 66 then white concrete just two there And then take your quartz stairs again there they are and you’re just gonna do two upside down ones there like so okay should be in line with these ones here and then we’re gonna take our gray concrete and oh actually now it’s one further one further there we go And another one of those gray concrete two of those go there like that okay and then two stone blocks two gray concrete here and then you take your stem bricks there’s one there and a sideways one one there just like that should be the same as uh what we did below That’s nice okay then from there do a stone brick slab one there one there and then a stone bricks there sideways one there and there and then just another uh gray concrete in the middle block there block there that’s all good and then stairs facing each other just like that So it’s basically the same as what we did on this layer just mirrored so yeah essentially just do that yeah so just like that there we go i think that’s everything from that layer mirrored over anyway so that’s nice so that back bits done for now at least Um so yeah we just have to do the uh the slabs on this section now which is another pain in the bum so yeah so stone slab there quartz slab you’re gonna do one and two one and two two stone ones uh one quartz two stone ones one Quartz and then a stone two quartz ones uh quartz one there a stone and a quartz uh where’s my where they’re clear it’s because i don’t have a optifine on this version anymore so i can’t turn the rain off i don’t think so two uh two stone slabs there by the Way two uh quartz ones a stone one is gonna go here two quartz ones and then a quartz and a stone there and finally two stone ones just like that and okay that’s it for this layer so we now have pretty much the the the footprint of the ghost uh the The top engines haven’t been done yet so it does have a bit more length to go i think but in terms of the actual shape now we have the bottom half uh pretty much all ironed out the next layer is actually going to be the uh the fill layer Sort of in the middle the sandwich layer where all the detail goes along the edge and i’ll explain what you can do for that detail uh when we get there so again i’m gonna have to ask you to mirror that over um off camera well i’m gonna go through the areas with You now so you can see what to do obviously we did the engine uh in its entirety that’s literally just a copy up from this layer here this is the the back section okay and this is the top view anything that’s not white concrete or stone or diorite is a Slab so just remember that and then this bit and then the front bit obviously is uh a bit nasty so anything that’s not white concrete stone science thing clay any full block essentially is is uh is a slab the only exceptions are these two stairs here and these two stairs Here so yeah down the front okay and then the cockpit we did most of that anyway we can literally do a little bit more there we go so yeah copy that over and we will be back with the next layer which is going to hopefully be a bit more simple Because it’s literally just the detail in the outside of these uh sections i think and then a little bit on the front there so yeah all right so kicking off this next layer everything’s uh being coppered over now we’re gonna start over here take our gray concrete again And i’m gonna do one two three and four just like that and then you can grab your polished die diorite do one there and this time we actually need a orange concrete very strange choice but uh it’s part of the detail so there it goes orange concrete Grab yourself an iron bar and that’s going to go here just in front of it i’m gonna polish die right on the inside and then grab your upside down stem brick stairs and do full on the inside like that grab your sandstone and do three here And then on the front we’re gonna take our green stained glass do one there and then three here one two three and then stone brick stairs one and two just like that and that’s gonna do it for the front section for that half so let’s move to this side here White concrete you’re gonna do one and two just like so and then one two three four five six and seven and one backwards and then two forwards here and two forwards here grab your stone block and do five just there like so and grab your cobblestone walls and you’re gonna Do five as well then do one here one here one here and grab your c lanterns and we’re gonna do one there and one there okay so yeah like i said this is the kind of detail layer in the middle obviously separates the top half from the bottom half of the ship Now there are a few different ways you can do this you can do it the way i’m going to do in the video which is to add a load of extra detail such as anvils stairs slabs cobblestone walls stuff like that that’s kind of more based on the rogue one Version of the ship if you want it based on on the rebels version you can just use mostly polish diorite on the outside of this and it will look more like that because that one didn’t really have much detail on the side but yeah like i said i’m gonna do the uh The rogue one version today so grab your stone block one there diagonal two diagonal two diagonal one diagonal two diagonal two diagonal one and so it looks like it’s just gonna be one set of one and then two sets of two one set of one two sets of two One set of one yeah so on and so on so two sets of two one two sets of two one two sets uh two i’m not sure what we do when we get to here but it’s just one there like that but we’ll see uh so yeah take off ah take off these Two take off those two that’s fine and then you’re gonna grab yourself your white concrete do one there stone block and then a polish diorite and then take a cobblestone wall and you’re gonna put that just here like that okay grab your upside down stairs And do one there and then a sea lantern is gonna go next to that and then stone blocks one and two and then a cobblestone wall there uh stone block in the middle cobblestone wall there uh stem block here and here and then take a polish downside in the middle And then just copy this over to the back exact same and two there like that see lantern upside down there is gonna go next to that polish die right next to that and then this time it’s two white concrete here and then what we’re gonna do is add the detail on this front Half and then in a separate tape we’ll go and do the back half so what you need for the detail if i can quickly grab these uh we’ll start off with polish diorite and just get that out of the way um so that’s gonna be i need to count this out So one two three bear with me so it looks like it’s here just one there like that and another one just here literally just those two are going to polish die right so it’s going to be on top of that sandstone slab from there and then this stone slab here So we’re going to grab the details anvil that’s going to be most most of the detail i’ll be honest with you stone brick stairs uh cobblestone wall uh skeleton skulls and that looks to be about it i think n rods as well actually uh where are they there we go Okay so from this left hand side here i’m going to do a skeleton skull and an anvil to be honest with this it doesn’t have to be exact to the video so you can just do whatever order you want but i’m just going to do it how it appears in my Model that i’m working from so if you just want to follow along i’ll uh probably not narrate the entire thing so yeah enrod and then this one’s an upside down stair and then a anvil and then yeah cobblestone wall there stairs gonna go there sideways uh skeletons go there and there and We’ll hear one there on there stir face that way two skeleton schools n rod and a stair facing upside down forwards skeletons go there and then lastly it’s going to be a stair facing outwards that way and a cobblestone wall so yeah that’s the the detail layer for This uh front side now obviously we need to do the back side so i’ll back in a second we’ll get on to that right just grab your stone blocks again we’re gonna do two here and then two and then two again this time and then one two two two one Two two two one just keep doing that this time it’s three sets of two instead of two sets of two three three three and then the last one is gonna be there and then next to that you’re gonna put a polished underside on this upside down stair here And a cobblestone wall between them and then another cobblestone wall here and then we’ll leave it there for now we just need to do this back section with the engine grab yourself your cyan terracotta and you’re gonna do one and two two stone brick stairs facing towards the front and then two Cylinder contour leave one and two side terracotta there put a gray concrete in the middle and that’s fine take polish diorite do two here and then a stone block is going to go there and grab your polished and side wherever that’s gone here we are do two here One stone another stone two white concrete and then grab your gray concrete and do one two three and four two stairs like that corner ones here bottom ones here just like so and then two stone brick slabs like that and that’s the the bottom engine done which is nice That’s out of the way now uh so let’s move to here and do the detailing on the outside of this uh back section so i’m gonna take a anvil and actually we’ll start with the polished alright get out of the way again it’s going to be The if you count down on these single stone blocks it’s going to be the second single stone block so that’s this one and then the two next to it is going to be two polish diorite as well so hopefully that makes sense and then the other set of diorite is if You count from this side the first single block gonna be a single guy right there as well okay so on this back section we also need the levers and i think i have everything else already here so we’re gonna start with a cobblestone wall and then a lever just like that and then An anvil and then a cobblestone wall anvil and then ah stem bricks there that’s what i need denmark’s there facing towards said anvil skeleton school there lever here it doesn’t really matter if you do it like that or like that it really doesn’t matter it’s not that big Of a deal end rod there lever facing towards it uh cobblestone wall upside down stair anvil here anvil here in a skeleton school uh same with skeleton skulls you can do them on the side of the anvil or you can do them on the side of the Stone it really really isn’t that big of a deal uh cobblestone wall there skeleton skull here and obviously we’ve got a diorite take a leather put that there anvil skeleton skull skeleton skull cobblestone wall and rod and an anvil like that and that’s the the back half of the detail layer uh done So yeah that is the entire thing for this one and again that needs to be copied over and i again i’m not going to do this on camera um in like i said in every other tutorial you know below this size i would normally copy over On camera like i have been doing because people did complain that they didn’t know how to mirror over which you know i did adapt to that and i did start copying it over on camera but i honestly i don’t think i could physically do this within a reasonable time so i am just Gonna have to ask you to do that yourself so let’s move on to um to the next layer obviously copy that over and we will be back i’m gonna give you a quick view of the overhead obviously we did the engine uh pretty much entirely on this layer anyway so that’s fine That’s this bit here um this is the side detailing on the back if you want to take screenshots side detailing on the uh kind of airlocks side detailing on the front and then the front detailing here as well okay awesome so let’s move on to the the next layer all right starting off This next layer this is where we start to taper back inwards we’re going to start at the cockpit again here and we’re going to do one two three four five six seven and then just do three here and three here take a upside down stair and you’re gonna put that just there Facing towards the front like that and then a upside down stay here upside down stay here and then take your green stained glass one there and oops one there and one there like that and then a stair here and yeah so should have this now should be uh pretty much mirrored top to Bottom so yeah um one quick thing sorry just move these stairs inwards i don’t know why i put them there to begin with to be honest with you so just like that okay and then grab a cobblestone wall and you’re gonna put one there and also there as well Last thing for this cockpit area just grab a wither skeleton skull you’re going to do one there and one there or you can just use a normal skeleton skull if you want if uh wither is too hard for you to attain if you’re in survival or whatever Obviously just use a normal one that’ll be fine uh next up grab yourself your quartz stairs and you’re gonna do one there like that and then you’re gonna take sandstone redstone’s downstairs this time one there like that and then a white concrete here two stairs there like so And then you’re gonna take your cyan concrete and you’re gonna do one two three four five six and then five here just like that white concrete one two three four five six seven and then polish diorite one two one two and then grab stone to here to here Grab your iron trap doors one two and three and then also stone slabs one and two just like that you should have this now for the front grab your full block of sandstone oops that’s a white wall one and two just like that and then oh i really need to get moved Into uh 1.15 so that i can have my up to find back because that’s where it uh currently is installed is on the 1.15 profile because uh quite a few 1.15 projects are in the works so yeah grab yourself a quartz dare again one here there there and then you’re Gonna take a quartz slab that’s gonna go here and then two quart slabs there as well and white concrete you’re gonna do one two and three behind the stair one white concrete here and then two stone blocks take polish diorite and you’re gonna do three one two three two white concrete there Two stone here two white concrete here two white concrete there like that okay then polish diorite single block white concrete here and here and then you’re gonna grab yourself uh lime terracotta i think it’s lime anyway i’m not sure if it’s lime or green let me go with lime for now so line There like that two white concrete on that side and then one here one lime here then grab your dark prismarine one there two lime terracotta here just like that white concrete is gonna go just there dark prismarine one two and three l shaped like so two line terracotta next to that you Should have this so far you can pause there if you like okay white concrete one here uh one here and a lime terracotta and white concrete here one two back by two here down by two and then one extra just there like that okay grab your stone again do two there Next up stone one two three l-shaped like that white turret concrete sorry one two down by one uh down by another one and then two on the side like that and polished diorite go diagonal and then do one two and three and then you’re gonna do a stone slab Just there okay so to cover this front section up let’s take our quartz stairs you’re going to do one here one here i’m getting this weird bug where it like double clicks when i write right click something which is really annoying yeah quartz stairs one there one there uh One is gonna go just here one is gonna go where’s the next one just there one is gonna go there in that little l shape of prismarine one is gonna go here with one block away from it uh one is gonna go there and one is gonna go there as well okay So now we move on to the slabs for this layer so grab your quartz slabs again and we’re going to start by doing one net two there one net okay and then one there and then you’re gonna grab your sandstone slabs do one here on top of that anvil And then from there to here one there two here one uh two here one there two here just like that okay uh grab yourself a stone bricks there now as well just gonna put that in that gap there it’s just the just the one stone bricks there for this layer Quartz labs one two one there two there two there and then that’s it that should hopefully match uh pretty much exact uh one last thing single stone slab there so it should obviously match what we had on the uh two layers down and now you kind of Got that all covered up which is nice nice it covers up that detail layer and we are obviously starting to go inwards now so now just to uh do this a little bit here and then we will do the back section in a different take obviously including the engine uh for this layer So let’s grab our quartz slabs again do two here and then you’re gonna put a stone block there white concrete here and then you’re gonna grab yourself your black terracotta and just do one there like that stone block is gonna go here and diagonal again one there And then two and then two here polished underside there there and there and i’m guessing there was probably meant to be one here and i missed it off for whatever reason so there we go so that’s added now um where are we cobblestone wall there and cobblestone wall there And that looks like it’s going to be it for that side so let’s quickly just do one last thing stone block here on its own on its lonesome and then we’ll leave it there we’ll come back in a second with the other half of that all right All right so moving on to the rear half of this layer let’s grab our polish diorite again and we’re also going to need that uh brown uh sorry black terracotta here is so we’re going to start off by doing the black terracotta just there same as on the uh Other side and obviously the previous layer before it which sort of mirrored it uh grab your stone block as well we’re gonna need that two stone is gonna go there and then you’re gonna take your quartz slabs do two and a sting slab is gonna go there With three polish die right behind it then we’re gonna go at a diagonal and floating in the air two white concrete facing towards the middle two stone blocks like that and then you’re gonna grab your cyan stain clay we don’t need it too much for this Uh this section but it’s good to have it uh in your inventory so just do one there and then we’re also gonna do a another one just backwards like that and again there’s that issue with the double click which is getting very annoying uh because yeah there we go two white concrete there One two polish diorite and then two to the side like that one white concrete here one stone there uh one white concrete here and then backwards by one uh science then clay there science think like that just like that two here one there and one there so just like that Then white concrete two and two just like that diagonal by one diagonal by one again and you’re gonna take your polish diorite and we’re just gonna do one there there there and there the tetris shape i think that’s a tester shape anyway it’s recognizable i think uh Yeah it’s one of those awkward ones that doesn’t really ever fit in anywhere white concrete here and then one just there like that stone block here white concrete one and two and then stone one two three polish diorite one two three towards the back like that then grab yourself your I think that’s yellow concrete it’s either yellow concrete or uh the other one the uh yellow terracotta it’s gonna be concrete i think so yeah one there two there one there two there uh two here and two here then with your stone blocks do another one there another one there Come over to this side take your cyan terracotta again and you’re going to come to the second polished alright do one two three four just like so grab your stone brick stairs do one here and we’re also gonna do one that another one that another one there Another one here and another one here and then grab your quartz stairs we’re gonna do one here we’re gonna do that’s it that’s just that it’s just that okay grab your quartz slabs uh we’re gonna do one two there one here two there one here and then one there and a stone slab One quartz here uh two there stone one is just gonna go here do a stem one there and there as well while we’re at it quartz ones one two one two and then now we move to here just do a quick polish diorite and that gap there and then A slab two slabs there two slabs there two slabs there one one two one two and then in this gap here is going to be one two and three okay grab your stone brick slabs this time one and two polish die right one two and three just like that and then a Quartz there sideways like so and then an upside down one just like that okay in the middle here there’s gonna be two science terracotta two upside down stairs add two cyan one gray two cyan white concrete there polish dye right here and this is going to be Polished and site you can do one two three four five just like that grab a stone block do one there and white concrete just one there like so then with the gray concrete one two three four and then just mirror uh what we essentially did on the first Engine layer because it’s exactly the same i believe and i may actually end up going and just doing this entire engine in one section we’ll see how that goes i may not do that but we’ll see two slabs there and then that’s going to finish that layer obviously for the this half Anyway so if you want to uh go ahead and copy that over again i’m not going to be doing that on camera just because it takes so long for me to do it and i honestly don’t think i could remember how to do it um again this is just a case of you Using your own initiative and mirroring over so i’m going to give you a quick view of all the sections again that’s the overhead of the rear engine and the side this bit here and from above this back section from above and from the side this center section okay The front section at this point it’s a little bit easier for you as well because there’s no upside down stairs or anything um well very few anyway the majority of it now is gonna be just straight up building layers on layers no hidden upside down blocks anywhere so that’ll be nice So yeah this is what we should have so far and that’s the cockpit i think the next one we may cap this off i’m not sure but yeah let’s copy that over and we’ll uh move on to the next layer while we do that okay so swiftly moving on to this next Layer we do in fact finish off the cockpit well one of them anyway the other one i don’t think has any seats or anything i thought this was the main one so i this is the only one included obviously you’ll notice that there is a lack of interior on this Uh the only real thing is the cockpit so yeah um just while we’re here actually i’ve just noticed that i didn’t do a another glass there there is meant to be one there so so yeah just get out that way take your iron trap doors and you’re gonna do one there and one There and a stone slab is gonna be behind it just like that take a quartz there that’s gonna go here and then three uh white concrete is gonna go behind that and then three polish diorite do a gray concrete in the middle then actually for the other cockpit We’re going to put a gray stained glass gray green stained glass i don’t know why i said gray there and there and then polish die right behind it on either side you know grab yourself your stone brick stair now again and we’re going to do one just next to that diorite And then a stair like that’s weird actually one there like that and then one there and then another sideways one i’m not sure why it’s like that that’s strange but yeah that’s how it is on my model so so yeah just follow that i’m assuming that’s correct i’m sure it’ll work Itself out eventually you can take three quart slabs there and also three quart slabs here um and then grab yourself your stone block uh get rid of the iron trap doors now as well let’s grab the stone where is it there we go so stone is gonna go one two and three And then a white concrete is gonna go just that grey concrete one two cyan terracotta one two three four two white concrete and then cyan one two three four five six seven eight nine ten three white concrete here two stone three stone there and then put a quartz slab just there And then two uh stone slabs are going to go here and two that and then iron trap door there and there okay stone slides again one two and three like that and then three polish diorite then two full sandstone blocks are gonna go here just like that two quart slabs Just like so and another one there then a quart stairs here uh actually make that face towards the back that’s better and now we’re gonna do our full blocks again so three white concrete three stone diagonal two polished diorite two white concrete two polished array in front to the side two white concrete And then diagonal one diagonal two this is all white concrete by the way um diagonal see two again down one back one down one side by two one down there so you should get that make sure to uh pause if you need to take your polished eye right now and You’re gonna do one just there there there there and there so it should be four here one there grab your line terracotta again you’re gonna do one two three one two one two just like that then grab your stem brick stairs one here and one here just like that And then also do another one there we can get rid of the stem bricks there’s basically off this layer uh with your i see white concrete again one last time one two three quart stair there quart slab one and then two there and then one two three polish diorite like that And a single stem slab is going to go there so it should hopefully mirror top to bottom there hopefully you’ve done it right uh stone slab is going to go here and then you’re going to do two quart slabs one two and then a stair here Uh quartz slab just there do a full stone block here and then a stone slab here now skip this bit do a stone slab there quartz there stain slab in front stone slide to the side full stone block here two quart slabs there one stair here two slabs there like that And that’s the front section done for that layer let’s move over to here now to the middle it’s gonna get simpler now i promise you as we move further up it’s gonna get easier we’ve gone through the hard part so yeah so two stone one quartz lab Uh i’ve lost my grey concrete now need it back there we go two there like so and then dark oak wood stairs one two three stone in the middle stair to the i fell off stay to the side stone that stair to the side again and then one two Three in the middle mirror this from the bottom to the top i think i forgot the cobblestone walls off the previous layer there we go one and two and then a upside down stair in the middle so yeah that’s that’s pretty cool that’s sword stem bricks there there Stone there it’s don’t worry stair there okay and then just one more stone here grab your dark wood stairs again one two three two grey concrete’s gonna go next to it just like that and then we can carry on with the back now i’m not even gonna do a different take And brave at one white concrete one stone one two three possible right like so diagonal i’m gonna do two white concrete one two two stone here like that and then you’re gonna take your sand stained clay let me rejig this inventory around a bit there we go One and two so just offset by one two white concrete one polished eye right here and one white concrete behind it one polished dye right here and then two white concrete to the side just like that so you should have this so far okay cyan is gonna go here With a polished eye right behind it white to the side polish die right behind it white to the side and then a side terracotta there two stone blocks here one two three and then in by one just like that with a white concrete okay stone one two three Two white concrete i hate that word now white concrete i’ve said that so much stone block there white concrete to the side and then polished arrow one two three and four and then one two and three with the stone two cyan here and that should hopefully line up with that one So yeah three polish die right there uh diagonal now how can i type it all again there we go and then three stone slabs one two and three just like that and then take your white concrete and we’re gonna do one two three and four and then two quart stairs and an upside Down one there like that with the cyan one two three four five gray two more siam stone there diagonal by one white concrete two grey concrete there two stone blocks here it’s there there corner one and then we’re gonna grab our gray again do one two three diagonal by one skip Actually now do four until four in total one two corner one corner one and then two on the front and a stem brick slab that literally is the same as this one down here so so yeah grab your orange sting glass that’s going to go in this gap here and then The sea lantern is going to go just behind it like that and then also stair there slab there okay now moving back to this side here we just need to do the the filling in for the slabs and stuff for that layer so grab yourself your stone brick stairs now we’re gonna do One here next to that stone we’re gonna do another one uh where is it just here next to this first of the polished i right in the diagonal line one here as well and that’s gonna be it for the stone brick ones grab the quartz ones now you can do one here Uh also just before we forget because i know i will do a quartz slab there and a stone slab next to it okay so you’ve done that quartz there there next up we’re going to do one and just where is it where is it here and then also here and here And then here and then here and that looks like it’s fine to me okay quartz labs now one there actually now that’s a stone one sorry stone one quartz one there what’s one there quartz one there uh quartz here quartz here quartz here uh this one is still Quartz keep going with the quartz i’m just going to replace the ones that need changing so that is going to be this one here and looks like that’s it so the rest were all course so yeah that’s going to be it for that layer uh obviously we did it all at once That time that was nice so again copy that over um until the very end of this build last few layers i don’t think i’m going to be able to mirror on camera so we’ll just keep that as the general consensus now so the bottom cockpit’s done i’m going To give you a quick overhead view again for you to copy over again there’s no upside down stuff really so you don’t really need the bottom side view so yeah so after working it out we are over halfway now and the recording time has come to about two And a half hours um but after editing i’m reckoning this may last about four to four and a half hours so yeah anyway so copy that over and we will begin uh with the next layer which again is going to get even easier as we get upwards in the uh in the build So yeah onto that alright so for this next layer we’re actually going to start at the back which is a change it’s definitely a change we’ve normally been doing the front first so we’re going to start by doing one and two and one and two just like that And then grab your sea lantern and your orange stained glass like that and then your cobblestone wall same as literally the exact same as this engine i would do this entire engine at once but the problem is that the detail around this area is probably different and i I don’t know i don’t know what it is for this uh this engine so can’t really do that oh well it won’t take too long to do uh one two three four i am doing both sides at the minute but i will change that uh very shortly And again we’re just doing a repeat of what we did down here so it’s uh not necessary to really narrate all of it again i’ve still got that persistent double clicking issue which i don’t know what the problem is um i’ve had two different um basically i bought this uh Corsair uh i think it’s iron claw mouse and i don’t know if i’m clicking it too aggressively or something but the previous one i had and this one the exact same model both are weirdly like double right clicking whenever i click it once which is getting really annoying So yeah anyway i’m just repeating this detail down here also i just went on to the next layer which is you know what screw it yeah do do the next layer as well while we’re here so that’s going to be a repeat of that there just do two stone here for now Um and then this is gonna go like that saves us doing it next layer that’s that’s all i’m thinking really two here stone brick slab that goes there and that goes there and i don’t know what the top of this engine is like if it’s um because obviously this one had sort of Top cut off by the bottom of this one so i don’t know a single gray concrete there we can bring that across actually there we go see that’ll save us that for next layer i suppose and so yeah that’s nice just do two uh gray concrete there as well And also just do one and two on that side okay stone block here two cyan one gray and then uh this time it’s going to be four cyan uh stair there stare there and then a quartz stair is going to be here and then an upside down one there again just like before And then we’re going to take our stone block and you’re gonna do three one two three and then grab your quartz slabs wherever they are i’ve lost them and you’re gonna do three here just like that grab your white concrete one two three four five six three stone slabs there like that Three polish diorite one slab is going to go there quartz there here and then three white concrete three polished diorite and then a quartz slab and a quartz there like that okay next up white concrete one two and three just to extend off that diorite and then another Dial right here should be a corner with that one quartz lab stem bricks there this time two stone blocks here one same terracotta there then diagonal another one white concrete in the middle so just like that so far stone slab here quartz slab in the middle and then white concrete One and two and then to the right saying terracotta one two down by one out by two and then offset by one you’re gonna do three just like that okay quartz slab quartz there quartz lab here quartz there there white concrete one two three stone slab quartz there and one Two three polish diorite and a single stem slab like that that’s the back slope done for that layer you can see we’re raising it up quite a lot now that’s very nice very nice to see uh here stone one white concrete one and then another stone slab to the right To grey concrete two stone and then this is going to be a stone brick slab i’m going to say stem brick slab uh what can i replace i don’t know cyan cement slab there stem bricks there is going to go here to the right one two and then the third one is gonna Slope just like that okay and then do a stone on the inside that’s just so it gets covered up from the outside so there’s not hole in the build and then you’re gonna grab your dark oak stairs do three stem block there grab your stairs one here three stone Stone there and stone slabs left and right stone bricks there there stone block here one two three and then this one is gonna be the same cornice there like that where they’re clear yeah that is really annoying now i never realized how much it actually rains in minecraft it’s uh kind of annoying And we’re just repeating the same thing we did on that side you can see that right click issue is getting really annoying now that’s gonna make this tutorial uh just that slight bit more awful stem brick slab here uh two stone slabs and just like that to be fair you could Probably fall to sleep to a video like this because it’s just that long and tedious and there’s not much energy three direct there like so one stone block and then two grey concrete and then now we’re going to do the full blocks because uh that’s easier than doing all the slabs Instead at the same time so white concrete is going to go here just behind that diorite to the side back one to the side by just like that and then you’re gonna do three offset by one from last time two here offset by one and two again just like that And then a diagonal one white concrete make it two and then two there like that polish die right now i’m gonna start by doing one here uh here and here here and here and then one just there and another one grab your quartz stairs now and we’re just gonna do One there next to that diorite and we’re also gonna do another one just here and then grab your white concrete again you’re just going to do one there grab your stem brick stairs here and also here and also here so you should have that grab your stone slabs you’re gonna do one there And one there and then the rest is gonna be quartz so that’s nice and easy to remember it’s just gonna be one here two one two one and then two there and two here okay no time to waste grab your stone two there like that offset from the Stair block that we put white concrete one two three and then a quartz there just there one two three quart slabs and then a white concrete is going to go here okay grab your yellow terracotta and also your yellow concrete and starting from this block just here this middle white Concrete is going to be four yellow concrete it’s really hard to differentiate between the two but yeah concrete and then one yellow terracotta behind it go down by three two yellow concrete there one yellow terracotta one yellow concrete and then just one a diagonal yellow terracotta okay next up just grab your Cyan concrete and you’re gonna do one two three and four just like that polish die right you’re gonna grab that put that in front of that single uh yellow terracotta white concrete is gonna go here stone block one two two and then white concrete one two three that one can join up grab Your sandstone block i’m gonna do one there grab your polish diorite one two three and then three stone slabs just like that you should be seeing this uh nice incline up there now so yeah this is getting very very long and drawn out one two three four five quart stairs like so And then grab your slabs and you’re gonna do actually do it sideways quartz there there as well one two three four and five white concrete there and you know what you can join up with that blue one as well three quart slabs here like so three quart slabs Here then this is gonna all be stone brick slabs okay next up grab yourself your red concrete and also your red terracotta even more colours to add to the evergreen collection one red concrete and then two red terracotta my voice is going now two stone slabs here white concrete there white concrete there Uh grab your i can’t tell if that’s full all blocks are not i think so two green stained glass and then uh stairs like that okay and then your gray concrete one two and three polished eye right here and then one there like that green thing glass there there And then stone slabs one and two and that’s it that’s it okay all right so that’s gonna be that layered done i think the main it wasn’t as like hefty as the other layers but there were so many colors and that’s really the problem with the ghost it is honestly like a very Very colorful ship but it’s a sort of different way in terms of the difficult textures than the falcon was because the falcon it’s just like everywhere and obviously that one was like six hours long pretty much six and a half hours this one isn’t gonna be quite as bad as that But it’s still there’s so much texture work that it really is like it drives you insane so i’m gonna quickly plug this in there but if you are maybe not enjoying this but if you appreciate the model and the work that went into it make sure to check out the Patreon page that’s always linked in the description obviously the more support i get on there the more time i’ll actually end up getting to do this so you’ll see more things like this more often and as we move forward into 1.15 the builds are just going to get even better so Yeah make sure to check that out and we’ve got plenty of tears available for different levels of support and but any help is appreciated really so yeah anyway let’s uh get that copied over and we’ll move on to the next layer we are getting there sort of three-quarter mark maybe That’s probably been a bit optimistic but yeah anyway let’s get on to that all right moving on to the next layer i’ve completely lost track of what layer number this is and i’m not going to try and work it out stone slabs here here and here and two polished alright just like that Behind it one gray concrete there there and there and then with the green stained glass there’s just gonna be two here and two on this side as well whatever go for it grab your quartz stairs do two there like that and then a single core slabs There and we’ll do the other side as well for the sake of it there we go just like so and then white concrete now there’s gonna be two just there like so grab normally i’d say nether brick stairs that’s what i’ve got on my reference model however do i have i don’t Read nether brick stairs all right fair enough so i recommend using uh red nether brick stairs i’m gonna have to use these ones because like i said i use both uh 1.15 and 1.12 1.15 is my current building version all my new builds are in that uh format obviously with all the New blocks and 1.12 is the current tutorials um sort of version we use because i have a few more left before you can move forward and sadly um red nether brick stairs and slabs are not in this version which is a shame so uh not that middle one i actually put a red Terracotta there and then we’re going to take a skeleton school i think this is just a normal one not a with a one that’s just gonna go there like that uh white concrete one and two diorite two stone and then white concrete one two three and four Just like so okay and then a quartz there is going to go just here and a quart slab is going to go there like that okay grab your stone slabs and you’re going to do two there and then grab your sandstone slabs to there like so okay Next up you’re gonna need your blue materials again that includes the saiyan terracotta the dark prismarine for the dark parts of it and then the uh gray terracotta for the sort of moldy parts i guess is what that’s supposed to represent two uh sand there like so and then dark Prismarine one two and three two down the middle one dark there uh dark sorry uh gray cyan one three there one in the middle gray on the left and then this time we need our yellow blocks so yellow concrete and uh yellow terracotta two terracotta there yellow is gonna be one Two three four and five white concrete’s gonna go here and then two stone blocks are gonna go just there like that okay grab your sandstone slabs again and do four there like so two stone ones here one stone one there and then a quartz one is just gonna go there like that Okay next up quarter slabs one two three i can’t even place that there and then one stair facing backwards and again we’re gonna do our slope again but as with every layer it’s getting smaller and smaller so it’s just gonna be three white concrete here and then two there one stone block Uh and then go diagonal do two polish diorite and then two white concrete one white concrete there two stone two stone like that another tetra shape one two three white concrete one two three polish diorite and then one stone slab there that’s literally the slope essentially for this layer uh quartz there there Quartz there there quartz there there and no stone bricks there’s this layer we’re going to do our stone slabs though one two one and one again uh this one is going to be a quartz lab two more stone ones that’s literally it that is the full slope For the front half the back one i think is slightly longer very slightly longer uh we need to finish off this side section here now this is the last layer for this bit with the brown materials so it’s just going to be the black terracotta under dark wood stairs our main ones So three there like that stairs on either side we can get these out of the way just like that throw that away throw that away we just need the uh dark oak wood three there three there then you take a stone slab and put that there like that So yeah mirrors exactly top to bottom very nice stone bricks there’s one two that i can’t place three four five just like that and let me check how i did it on the bottom layer actually all right so it made a weird weird pattern okay Is it gonna do the same thing i don’t know there we go all right so three four in total stairs on either side four that one fixes like that there we go uh polish diorite one two three four one two three four just like so and then stone slabs One and two one and two just like that exact same as previous layer so it’s literally just a case of copying upwards so yes this grey concrete and then the stairs here one two and three and then in the middle is going to be the stone four like that uh it’s down brick Slabs one two and one two and then another stone slab here then white concrete you can do two there stone block here two white concrete two stone one white concrete one stone one white concrete two stone one white concrete there and a stem slab here very nice very nice indeed Uh where where am i now let’s see polished all right one two and three stone slab there and now we move on to the back section so grab your white concrete got a diagonal from that diorite and do one and two then cyan stain clay one two outwards by one there Uh do another one actually and then two behind it makes that and then you’re gonna do a quick little uh stop the rain first a quick little two by three just like that okay take your white concrete again three here like that the double click issue is coming back lovely uh grab your Cyan um dark prismarine and your great terracotta again we just need that uh for a little bit longer two is gonna go here with the siam and then the gray terracotta three cyan and then upwards and then do another three there like that so you should get this okay and then with the Gray terracotta just do another one there grab the dark prismarine one two three four two there white concrete and then a cyan concrete there like that now let’s fill in the gaps one two three with the white concrete and then we’re gonna grab white concrete on the front of this Cyan do three upwards by one two stone blocks next to that make that three and then three stone brick stairs just like that and then another quartz there is just going to go here like that i feel like i’ve made a dime mistake here yes i have never mind Delete that row there okay three stone blocks here that bit was right and then we have to do another diagonal outwards do two white concrete another three stone three stem brick stairs and then one quartz there like that and then this time white concrete two diorite white concrete one two three And then two stone blocks like that okay get rid of the dark prismarine now and also the gray con terracotta so now let’s do the slabs on the outside it’s going to be uh let’s see one stone slab two quarts three stone slabs here one quart stair is gonna go just there with Three stone slabs quart slab one quartz there uh one stone brick slab one stone bricks there again same thing just like that and again same thing here okay we’re gonna pull these gaps one then brick slab here and one quart stair there that time okay so that’s gonna be it for the main Body really for that section let’s go over to here grab the gray concrete and just do one and two and then that engine is already done so that’s fine the the one thing we do need to actually start there is the two upper engines on that side and that side Um so let’s go to i don’t actually have the measurements here which is a problem so what i am going to do i think is hang on can i i’m going to try and move the window a second i hope this doesn’t mess up the recording there we go All right so it’s going to be uh go outwards from see so this polish die right here i should have prepared this a bit better grab a temporary block i’m just going to use uh a gray concrete for now to make it confusing you’re going to do five blocks just from That polished outer eye take two stone brick slabs and then five grey concrete three number ones and then a corner one on either side just like that okay delete those first five ones that’s gonna be floating just like that okay so uh once you’ve done that again this all needs mirroring over And then we can move on to the next layer it’s gonna get a lot easier i promise you uh i don’t know if you notice but these layers are getting quicker so so yeah we don’t have to worry about the slopes of the build anymore which is nice Uh except the upwards ones just not these kind of sideways diagonal ones which is good anyway on to the next one okay so for this layer we’re going to actually start in the middle here this would be a nice change uh we’re going to put a row of stone Brick slabs across there like so just in line with the gray concrete from the previous layer and then two sets of gray concrete all the way along there just like so grab your stone slabs do one there and one there and again on this side same thing Just like that and then grab your polish die right you’re gonna do three here and three here do two white concrete in that side and then this time white concrete and a stone just for a bit of added detail you know i did four there by accident there we go All right so starting off the back i’m gonna do quart stairs one there like so stone brick slab next to it white concrete there uh cyan terracotta stem brick stairs then brick slab and then behind it white concrete one and then skip one and do two three just like that In the gap here you’re gonna put a orange concrete just like that and then a quartz stair here quartz lab there okay now you’re gonna grab your blue materials again so cyan gray and dark prismarine i’m gonna do three and then you’re gonna do that by five So three by five just like that one here two greater cluster there like that and then take your sign again and you’re gonna do one two three uh four and five to make six in total okay with the great terracotta due to that and then with the dark prismarine three And then a two by two just like that okay grab your white concrete you go to here and do all the way along just to where that dark prismarine is and then two there as well and then just one in front like that and then a cyan Concrete there as well grab your stone slabs you’re gonna do one two three four five six one two three four five one two three four just like that okay grab your you can throw this away now by the way those three uh materials grab your gray concrete again and you’re just gonna do Three there like that so just there okay two white concrete is gonna go here and then one two three four five six seven in total just like that uh do one so do three polished underside a diorite why did i say anti i was doing so well it’s diorama and one white concrete There three quart slabs one two three and also three here one two three just like that stone brick slabs one two three four oh my god two three four five and then one stone slab there like so uh you need your saiyan and your gray again so this time Do cyan there gray cyan and then one two three four great grab your stem brick stairs do one upside down there like that and then another one just here and then grab your stone brick slabs and you’re gonna do one two three four grey concrete one two slab there Slab there and create concrete god it’s never ending with this rain there we go so you’re doing slabs you’re doing your grey concrete there and then we’re going to do a six by three so three three three three three and three six by three two there to that Uh stair there and then a corner one stair there corner one and then also just a stair there’s a slab i can’t tell just do a stair for now there and there like that okay uh moving to the middle we finish off this engine uh this little one you’re gonna do uh Two here like that and then four grey concrete stair there stair there corner corner uh if you are in 1.16 you can actually use black stone for the engines i should have mentioned that uh sooner but blackstone would work well with the gray concrete so yeah that’s an option for you Uh also i did see something um on on my build and i just wanna make a quick adjustment so where those uh slabs are change those two stairs just like that on the outside there we go and then put a uh oops uh top half stone brick slab there there There and there just like that and that sort of makes it look a bit better i think that was an adjustment i made after i uh got the reference model for this tutorial and that’s why it took this long to actually add it in so yeah there you go it’s a bit better Looking than what we had before so once you got to here grab yourself stone one two three four five six white concrete you’re gonna do three there three top half stone slabs and then a hmm i can’t tell i think it might be a stone brick slab just there like that And for good measure do another white concrete grab your stone block and then this is just going to go over here almost join up just do a signed terracotta there in that gap okay so that is the uh the back half done for that layer anyway And any sort of time we saved from having to do these big slopes anymore is now being used on the engine section so yeah that’s kind of where it’s all where all the energy is being focused now so yeah grab your white concrete one two three and then your stone uh Two there white concrete there okay and then from from there just grab another two white concrete quartz stairs and then take your quartz slabs one two three uh two there stare there slab there okay grab your yellow concrete you’re gonna do one two and three and then your sandstone Slabs one two three as well and then two white concrete one stone three quart slabs and next layer in three stone three quart slabs and then now we do the blue blocks again one two three grab the gray terracotta do one two cyan three sign next one in Two grey is going to go there and then one dark prismarine and then three dark prismarine throw that away again okay grab your stone slabs again and you’re just gonna do a three by four like that very nice and simple there if i could actually place the blocks well just do another one There like that on its own two white concrete’s gonna go there one polish die right here uh this time it’s gonna be one two three and four i believe with the uh let me just double check that one two three four yep with the white concrete one polished sorry not polished stone And then the polished and then two quart stairs next up is going to be three red concrete one two and three and then one singular red terracotta just like that grab yourself red sandstone stairs and you’re gonna do a sideways one and then a very confused as to what that is Actually one second that that’s nothing short of strange okay uh one facing that way and then a corner one like that as well uh three stone blocks there and then you’re gonna take your quartz slabs one two three one there one there stone brick and then a stone in the middle Like that okay and that’s uh gonna do it for that layer again let’s uh copy that over and let’s move on hopefully again it should get easier but we obviously have to build that kind of top section as well but yeah um no more slopes pretty much onto the Next layer all right so starting off with this next layer we’re going to grab nether brick slabs and brick slabs to start off with uh again if you are in a future version of minecraft 1.13 14 or 15 you can use red nether brick slabs um although i don’t actually know when Those were introduced uh whichever whichever version those are in i’m using just normal nether brick ones but obviously if you have those go for it i’m gonna put one there and one there with the nether brick ones join up by three one there and one there Um i’m not sure if i’ll do the full layer on this one i might but we’ll see uh and then do a brick slab there one there and then two on the side like so just like that uh i am doing it for the starting bit just because uh I don’t know i don’t know i don’t have a reason i just sometimes do that grab saying terracotta go to the middle and you’re gonna do one two three four five just like that and then two here uh and then take your stone do two there And take your white concrete and do two there just like that polished i write is gonna go here stone block and a white concrete do two quartz stairs here one white concrete one polish diorite one stair there one white concrete one stone one white concrete one diorite three white concrete Take polish die right here and you’re gonna do uh three six eight i think it is until uh maybe nine actually one two three four five six seven eight nine yeah it’s nine okay so nine blocks there like so um and then do a stone slab here And then you’re gonna take a sandstone stair that’s just gonna go one two three four five six seven then on the eighth one it’s gonna just be a cornice there like that grab sandstone slab now do one there then three quarter slabs three stone slabs just like that Okay so once you have done that grab your stone block again you’re gonna put that just there and then a white concrete block is gonna go here and you’re gonna take your gray concrete again and just do all the way across like we did in the previous layers just to there And then this in front of it is gonna be stone slabs just like that and then one and two more two stone blocks and then two die right there like that okay now grab your stem brick stairs and also your quartz stairs and you’re gonna do three stem brick stairs floating here diagonally And three quart stairs as well then one stone bricks there just like that then grab your gray concrete and you’re gonna do one and then just do another six one two three four five six like that okay should take you to the uh the three that we placed on the previous layer Okay on the second one along do a uh quartz slab then a stone one and then two more quartz ones unless then one here then you’re gonna do two stem ones down two quarters down two there one stone one quart two quarts here one stone there one stone there okay Now grab yourself because this is kind of the detail uh section here that i added in i’m gonna do three more grey concrete just say like that and then above that one just there gonna do four and then down by two put a stone block here and now you’re gonna grab yourself a Couple stone walls or if you uh uh again or in a future vision minecraft use stone brick ones those will look a bit better do two here three there and then you’re gonna grab yourself a fence gate put that there grab two end rods i also like how in the newer version of Minecraft uh the end rods they don’t have the pink bit on them that’s really nice and then just an anvil there like so okay next up grab your grey concrete again and we’re just gonna do one two and then on the second one it’s going to be a stone slab Just like that and then you can do another two and then on that second one take an iron bar and you’re gonna do four of those in total carry on with the uh grey concrete do one extra there put a sand there cyan there very concrete in the middle and then one Two three four and five this time then grab yourself a cobblestone wall you’re gonna put that just there like so and grab yourself your grey concrete again and you’re gonna do one two three by six so just take up to there basically for now uh we’re not gonna do that bit just yet We’re just gonna finish off the main body here so grab your stone block and you can do uh one two three four and five should leave you three in the middle and then do a stem brick stair there like that and then three cyan blocks and then with your white concrete you’re Gonna do a two by three there like so okay and then do one two three and four obviously it’ll be seven if you do the the left-hand side as well and then you’re gonna do one two three one two three and then just one there like that okay Whether you’re polished die right now to there to there okay and then with your polished underside this time to there like so and then grab your stone slab and you’re going to do one oops not there white concrete one two three four one two three now grab your stem brick stairs and You’re gonna do a sideways one there one there like that same again on that side and then here it’s going to be three uh wide in the gray concrete just like that and with your science thing clay delete that one by the way and wherever that is there we go one two three And then bring that to the back just like that take a uh stem brick slab just there that’s going to go there as well and raining as usual with your gray concrete you’re going to do one two three four five six just like so and then with your stairs you’re gonna basically do Three there and then a stone brick slab there stone brick slab there okay take your sea lantern again and you’re just going to put that here like so and then again we just do the same thing on this side so the slab is gonna go just there one two three four five six Three stairs slab there slab there okay now one last thing i’m not sure if you necessarily need to do this but i’m gonna do it anyway uh you want to bring your white concrete set of three up until the uh just past that second uh stripe of cyan So just there um again that’s on my reference model i’m not sure if it’s necessary so we can always delete that afterwards if it’s not uh sometimes i just didn’t do bits like this for some reason when i’m building it and then forget to take it out so we’ll see we’ll See if that’s a thing or not so yeah i think we’re gonna we’re gonna just mirror that over uh off camera again i’m gonna give you an overhead view obviously we already did the the front red bit on camera that’s fine uh so that’s the the front bit there and then the side And then this bit here and then the back bit just like that we may need to make a few edits to the engines in a minute um just because my reference model isn’t entirely clear about what you need to do so i’m i’m thinking these cyan bits needs to be Tucked back a bit but we’ll sort that out afterwards that’s absolutely fine so yeah on to the next layer okay so i figured uh out the reason why the engines don’t look quite right is because uh when i actually took the old model that i made and uh Ported it to mcedit to to use as a reference i clipped off the last two layers of the of the engines which is why they’re actually uh like straight straight on with the the lower engines they’re meant to be two and two blocks that way So what i’m going to do is just come back at the end and add those blocks and it shouldn’t take too long should take like two minutes so yeah we are going to start at the engine just because i know that this is the very end of the Model so it’s a good reference place to start so we’re gonna take our gray concrete do two two two two and two so five in total five by two and then three there grab your cobblestone walls uh again if you’re in one point sixteen blackstone would be a Good option to replace all these uh like stone brick blocks with so yeah that’s an idea cobblestone wall there after doing three three there like that and then just do another one here in that gap there and then do one two three four so that’s offset by one Again same on this side we’re just going to quickly copy that over uh we don’t have a cobblestone wall here i don’t think it necessarily matters because there doesn’t seem to be a block there anyway so yeah you can put one there if you want But it’s not seen so it’s up to you two cobblestone walls are gonna go here and two here as well do a grey concrete there and bring that down it’s just basically the same on this side now and two there like so okay so you should get that Do a uh cyan terracotta there and there and then grab your sealant and then do three just like that okay next up saying terracotta you’re just gonna put one two three four five six there like that and then grab your white concrete you’re gonna do three there like so And then you’re gonna do one two three four five and six and then another five to make 11. turns out we did need that by the way so if you haven’t done that make sure you uh put that in so 11 there in total then a diagonal Inwards do another white concrete then a diorite then a white concrete then a diorite again uh essentially that middle block is gonna be the white concrete okay grab your stone slabs and you’re gonna do a three by five so two three four and five there like that Grab your cyan again you’re gonna do one there and then two quart stairs white concrete stone slab there two quartz slabs are gonna go next to that there we go two quart slabs and then four stone slabs one quartz three stone then one quartz there okay uh once you’ve done that go to Go to here i’m gonna take our stone brick stairs now and you’re going to do one two three four one grey concrete three cyan and then one two three four five grey concrete i’d do a single iron bars there like that and then one two three four stem brick stairs here one grey Concrete there and one stem brick stair facing backwards do a couple stone wall there just next to that stone bricks there and a gray concrete here and take your white concrete and you’re gonna do one two three four five so that’s five six seven eight nine just like that okay Grab your yellow terracotta and yellow concrete again and you’re gonna do yellow terracotta yellow concrete terracotta and then two yellow concrete there and grab levers and just do one there one there flip those down very nice uh three upside down quartz stairs are gonna go here two stone brick stairs and two upside Down quartz again and then you need a red concrete and red terracotta and terracotta goes first then the concrete and then this is just gonna be white concrete all the way along here just do it up to the uh the polish diorite section there okay so grab your we’re gonna be Covering this bit up now grab your stone slabs one two three four uh i think it’s seven five six seven just like that and then do one here and then you’re gonna add an extra one two three six here so one two three four five and six just like that three white Concrete there one stone block is gonna go next to that um and then take your quartz there you’re gonna do one facing outwards and then all these one two three four are gonna be like that and then another one cornered off like so and then stone slabs one two three four Five six seven and then another one there grab your stone brick ones those are gonna go all the way along the front just like that then you’re gonna take your stone block you’re gonna do one two three four and a polish die right it’s gonna go next to that Just like so and then here you’re going to grab polished underside one two and three like so stem block there there and there and then add another three to make that okay polish diorite one and two and then two there as well and a polished underside there Should we get that do two stone blocks uh where are they let’s see there like so and then take your stone brick slabs and you’re gonna do three like that three again three again keep doing three and three again do two there one there and then the rest can just be white concrete There you go simple as that so yeah once you’ve done that section you can grab your delete that block by the way grab your cyan stain clay we need that again one there two white concrete one polish diorite two cyan and then one at stone bricks there Inwards by one do a white concrete behind that and then a cyan there as well then at a diagonal this time it’s going to be polished eye right there two stone blocks one white concrete and then take your quartz slabs you’re gonna do two and then a stone slab there okay Come back to the stone and the white concrete do two polish diorite and then three stone slabs one to the right two quartz slabs there behind it okay do a single stone brick slab in the middle next to that quartz block well slab and then white concrete two there And then cyan one two three four just like that okay now once you have done that that’s going to be it for that later so again copy this all over um Again it’s still going to take absolute ages to uh to copy that over on camera um i think that is going to be something that i tend to do in just smaller builds not like ones this large obviously i don’t build things this large very often so it’s Forgivable i think that i don’t mirror it all on camera because building this this is like tens of thousands of blocks and to do all those by hand does get very very tedious so yes let’s move on to the next layer all right only a couple more lays to go now i’d say Four or five um but the last two are like literally just a dome tour on top it’s very easy um now we can just mirror off this engine basically um if you want to do all of that now that’s up to you um so yeah i think i might actually say We don’t have to do it next layer so grab your gray concrete again same as before um this goes all the way all the way back i’ve been thinking about um doing builds in sections rather than layers which is obviously a big step um but i don’t know it might work really Well for some for some builds so we’ll see we’ll see if that happens all right so three stairs there like so this goes all the way back uh to there and then the slab is here and the sign is there and there there’s one there as well uh And one in the middle that’s all right uh where are three grey concrete here and then one two three on the front one there corner one one there corner one slab like that engines are fun to build because they’re like symmetrical on there so that’s not going to be there there we go I think that’s it for that layer for the engine so what we can do is just uh finish that off so do two there like that uh just do do two slabs there on the top one even though obviously they carry on on the bottom uh just do two there for now um And then i didn’t realize how bad i was at mirroring i used to be really good at this two they’re like so one there corner one uh one here again like i said we have to finish off the back of this engine because uh sadly it got lost in translation so i Have to uh go back and redo that i’ll not redo it but finish it off so yeah i don’t remember what gray concrete i used down there that’s the problem oh well uh it’ll be fine so uh any announcements or anything um not really i’m still working on my Two to one scale aquatons cruiser i don’t know if any of you have seen that on the community page i have been working on that quite a lot um and that is getting to a stage where it’s kind of still a framework but some of the major parts of it are actually Kind of finished like the engine block is completely done pretty much um so yeah anyway we’re almost done with this uh with this engine here there we go i think that should be all mirrored over nice and seamlessly looks like it to me so yeah and like i said we’ll come back To the the sort of end bit later it basically looks like uh like this but slightly bigger so yeah uh anyway back to the layer we were actually working on which is this one here uh we’re gonna grab our stairs you’re gonna do one there and Then one facing away from it kind of like that okay and then from there grab your gray concrete you’re gonna do one two three four and then with your cyan you’re gonna do one two and three and then with the gray one two three then on the fourth one Just take a iron bars you’re gonna put that there and there do another gray behind that and then just do another two stare there slap there okay now on this block just here put a stone block take a lever and you’re gonna put that there and turn it down that Joins up nicely with the iron bars take another lever and you’re gonna put it just here facing towards that stone block and grab n rods and you’re gonna join those two up one two three and four just like that nice and simple grab your white concrete now you’re gonna come to here Yeah yeah one two three and basically i’m not gonna count that but just bring it all the way along uh up until up until that stone bricks there uh like i said the reason because you can barely barely barely that block there that that cobblestone wall you didn’t need to Do it because that gets covered up the only place you’ll actually see it is if you came so like super close into this bit here and looked through that like single pixel cap but yeah that’s up to you how how precise you want to be about it put a uh White concrete there and then quartz stairs one and two and one there one here three there one there with quartz two two with quartz one white concrete one stone one polished diorite one white concrete and then corner one white concrete diorite stone you’re gonna put a cobblestone wall just in this gap Yeah very nice uh back to the outside blocks here you’re gonna take grey concrete do one there and then one and two here like so and then the yellow terracotta and concrete is gonna be the exact same as last layer so just mirror that over well up take two cobblestone walls there and Then come to here i’m gonna take our polished diorite again one two three one there with the quartz there one white concrete two stone red and red are going to be the same as last layer three stone next to that four diorite three white concrete Cyan is going to be the same as before and then two quart stairs here go at a diagonal and do a diorite concrete stone two stairs and then you’re gonna do two white concrete in the middle to polish diorite two white concrete and then one two three four five this time with the Cyan just do a stone brick slab there um three stone slabs one in the middle and then two quart slabs there in there like that okay so uh mirror mirror that over and we’ll move on to the the next layer so yeah all right next layer uh also i copied both engines Uh to be fully complete so that’s uh something you can do if you want uh because i’m not gonna be redoing these layers or re-commentating on them on this on this one since we’ve already done it so yeah we’re literally gonna start from here so two stone blocks are gonna go there Two white concrete and then do uh diorite white concrete two white concrete alright white concrete two white concrete then do a stone one two three white concrete one two three two eye concrete there one stone one white concrete and then two white concrete one there stone diorite white white there diagonal diuretic stone With a coal stone wall in the middle simple as uh do three extra white concrete there then take your upside down stairs now three quarts one stone uh one quartz three stone one quartz two stone one quartz one stone one quartz uh yellow uh concrete one two three Four yellow terracotta one two three four and oh sorry three and then yellow concrete one two three four just like that okay polish die right there one two white concrete quartz stairs here three stone one red one red again one white two stone there three polished alright this time One white concrete two quart stairs and then go in a diagonal stone block uh cyan terracotta two white concrete here uh go in kind of this way you’re gonna do one and two down like that tetra shape again and i’ve done that the wrong way around It’s meant to be uh that way there you go and then stone block one and then two and two quartz slab there and then a quartz stair here and then you’re gonna take your stone slab again and you’re gonna do one two three four two down there like that one two three four One two then a stone brick slab is just going to go here like that okay so that’s going to be it for that layer uh much easier without having to do the engine on the back so yeah again let’s move up to the next one we’re getting very close now so copy That over all right so we’ll start this layer off by taking a stone block we’re going to put that there and there and then two polish diorite next to it i’m going to do both sides now because it’s quite easy so just like that and then cobblestone wall on either side And then one white concrete there one there and then three polished alright you can see that’s kind of capped off the doorway which is essentially what that’s meant to be so yeah grab your yellow terracotta you can do one there one there and then grab your sandstone slabs now I’m gonna do these all the way to the back uh i think it’s there this is the very back uh but we’ll work that out in a second i come to this block here i’m gonna do two stone slabs i’m getting that weird double click thing again now And two quartz ones one stone and then a quartz and then one stone and then a quartz and then two stone and turn the rain off and then one quartz here as well same again on this side so one there one there one there two there Two one one two two there we go very easy and then we take our sandstone stairs now and these i assume are gonna go all the way all the way to there and again all the way across to there and now i’m only guessing that’s how far It goes and i’m hopeful i’m right otherwise this is going to mess up the entire layer but one two three four with the quartz stairs and then we need stem brick ones stone brick ones one two and three yeah it looks right to me now because it’s gonna be two Nether brick stairs here again if you have red nether brick use that one two three four quartz ones white concrete there two stone here stair here and then take slabs quartz two take stone one two three stare there polish diorite is gonna go here uh stare there And then do a polish die right in the middle and then two sea lanterns on either side of it and we’re just gonna mirror that over so one there polish diorite stair facing backwards uh three stone i don’t have enough inventory space i hate this like that two stem blocks here one my Concrete one two three four two and uh bricks red nether breaks if possible three one two three four there we go that’s uh all done that layer not for the actual build uh not many more to go now obviously the engines have been capped off um on that layer so No more to build on top obviously we’ve got to build the back like us keep saying but then the rest is literally just this section in here that needs to be uh finished off so yeah let’s go on to that on to the next layer all right so this is actually The layer that we we do cover all that up so that’s uh that’s nice let’s start with a polish die right just on top of those cobblestone walls and it’s a nice reference point to start with three upside down quartz stairs on either side and then we also need an upside down uh Sandstone’s there there we go just like that now do uh five white concrete there and then seven behind it like that die right there die right there white concrete’s gonna go here two stone blocks one white concrete and then you’re gonna need your yellow terracotta you’re gonna do one here one here and Then also one on the seven that we did take your stone one two three four two white concrete one stone uh two diorite one white concrete one uh we’ll do that in a minute but stay stay at that white concrete for now so take your yellow yellow concrete now And you’re gonna do one two three four there like that one here uh one i see where i am one there and then two yellow terracotta and then yellow concrete you’re gonna do five and then you’re gonna take one white concrete and one diorite and that Should take you up to where i were before okay next up grab your white concrete again you’re gonna do one two three four five in the middle do that while i’m here as well and then take your white concrete again do three and then quartz stairs you’re gonna do One two three four five facing outwards one two three four five just like that uh three white concrete there one just stick it out like so and then take your stone three three one there one there okay you need polished andesite now and you’re gonna do five of those one Two three four five one here like that and then take white concrete one there and then a diorite and then one two three white concrete here now we should be up to the layer of the the two reds you can do two there and two there Same colors as before just like that do a polished andesite just there and then three white concrete in the middle and then there’s a lot of linen to do on this layer i do apologize and then take your cyan and we’re going to do three three and just keep doing three and Just up until three past this red so we’ve done one past two past three past so there you go okay take your polish die right now and this is gonna go all the way all the way along uh you’re gonna go past this and you’re gonna go past it by six so One two three four five and six should literally just uh kind of join up all almost with that one so yeah do a white concrete here two polished andesite two diorite three stone and then one stone slab just there and then back to here do a quart stair And then two quart slabs just there like so okay now on the front one stone slab here and then we’re going to take stone brick stairs wherever they are i’ve lost them you’re going to do three of those just like that okay take your white concrete do three here And then a two by three with the cyan terracotta and then you should be left with a three by three here and you’re just gonna put a single gray concrete in the middle and that’s sort of the foundation for the turret on top so now we’re going to copy that over And that was a little bit more difficult than i was expecting uh so i’m sorry about that uh we’ll get the colors out of the way first so there we go get those out of the way get the yellow and the yellow out of the way as well Let’s do that real quick one two three four five i think it was two there one there one there one two three four five four yellow terracotta yellow concrete yellow terracotta there one two stone one there that’s the back bit done two here one stone two diorite one white concrete there one here One outwards there and the side diorite diorite one two three one two three and the site there almost done guys don’t worry quartz there here and it was two slabs wasn’t it yep one two two underside two diorite three stone and then two stone slabs there Right that is uh gonna be it for that layer so let’s move on to the final section and then we can do the engines and then the excess detailing that i need to add in afterwards so yeah on to that right so let’s start off this final section so we’re going to Do the back grip first and then move on to the uh the turret bit i’m going to do three stone slabs there like that three polish diorite and then we’re going to do four polish die right backwards to make five in total and then far well four white concrete like that Okay take your quartz slab put that there and then stone slab there uh stem brick stairs one two three and then take your quartz stairs you can get rid of the yellow terracotta and concrete now we don’t need those anymore that’s all done quartz there’s two stone brick stairs Two and then a sandstone stairs just there like that okay grab your quartz stairs upside down one two three four and then five and then the last one is going to be sandstone just hovering outside like that okay same again on this side here so quartz stone three two two sandstone All upside down stairs here five in total sorry six with the quartz now six in total five quarts one sandstone there we go sorted and then take your sandstone slabs now one two three and that’s the last of the sandstone uh for this build which is nice do a two By three with the stone slabs four four with the quartz and four in the middle with the stone then do a three by three with the stone slabs just like that that is the back section done and then moving forward to here now i probably should have planned this Ahead a bit better but take your cyan do a three by three just like that grab your green stained glass one two three and four with one on top grab your cobblestone walls you’re gonna put one there and one there and then grab your green stained glass you’re gonna do one there One there and then also one on the side there one on the side there and then stone brick stairs on those two front and back ones throw away that green stained glass we’re done with that for this build grab stain bricks there’s one here one there and then one facing it sort of Made that shape and grab your stone slabs now i’m gonna do three here and then bring that all the way around all the way around there and then do another another one there sideways sideways just like that that’s fine let me just double check that one second yeah that’s fine and then Stone slabs one two three four five and then you’re gonna take another brick or red nether brick three there okay and then where the clear again grab your dark oak fence gate one there one there and then n rods one and two and then grab your stone slabs again We’re gonna do seven in a row so one two three four five six seven one two three four five six seven and then you’re gonna do one in there one in there and then three here like that now do a slab there slab there and also one here like that And now this is just gonna be a load of detail um so we’re gonna start off with the iron trap doors i guess two there um and then let’s do the levers now you need one there next to that stone uh slab one there one there one there or in total Throw the levers away you don’t need those anymore and rod just do those between the levers lit them to make them actually join up so you should get that daylight sensors something i use a lot more now actually daylight sensors i’d normally turn them blue as well looks a little bit better One there as well uh pressure plate strange one just throwing it on the floor there and there and then last thing is gonna be two skeleton schools do one there and one there okay so normally this would be the end of the building we’d all be celebrating and having a drink Um but i have to finish off these engines and there are a few little details here and there that we need to add on afterwards uh but we’ll get to that in a minute there’s not very many so yeah let’s uh finish off these engines and then the Build will be done so yeah all right so to finish off these engines you need to grab your great concrete stone also grab yourself stem brick stairs grab yourself some orange stained glass and grab yourself a cobblestone wall and stone brick slab okay so we’re going to start off by doing a Stone block there there there and there and then filling in that little cross shape with orange glass then grab your gray concrete you’re going to do three here three here three here and three here now on these side ones it’s going to be cobblestone walls on the top ones it’s going to be Stem brick slabs just like that okay do stem brick stairs there there there and there as well and then do a stern brick slab here then brick slab here um one there and there and then you’re gonna take a stair put that here and here here and here And then two corstone walls there like that and that’s it for that engine let’s do the other one uh one two three ah damn four stone blocks all around uh three like i said it’s very simple it’s very easy three just like that uh also i need to Remember to take off the temporary blocks when we when we do the kind of after build showcase so there we go awesome then it was two there i think two there uh cobblestone walls like that and then upside down stair there there there and there i think that’s right Yeah so that’s the the engine’s done now the details on the actual bill let’s throw that all the way it’s just a few buttons here and there literally uh so one goes there and i think there was another one here it’s the same again on this side Just like that and then on the on the top side here there is a button on on this section somewhere i need to just quickly rotate my model around okay i see where it is so it’s on this white concrete just there and again just there now let’s take off these temporary blocks And then i can finally be free of this pain which has been the ghost uh although from what i can tell by my current recording we are only at about 345 so just over half the length of the millennium falcon so yeah that is that is done that’s the Ghost um all them so yeah i hope you enjoyed guys and um this recording process has been taking place over last couple of weeks so if my voice changed at a certain point apologies but yeah that is the ghost that’s all done finally um at some point i may put a phantom in The back but that’s why it’s kind of like blank in here because it is intended to have one in here um but i’ve not actually made a model for it yet uh from what i can tell um the i think it’s the sheath the peach shuttle the Separatist one they use one of those as one of the phantoms but the actual sheath bead is quite a bit wider than the actual space here so i’m not sure how it fits in there um so yeah we’ll see what happens anyway guys thank you for watching and i will see you In the next video um again the the last few 1.12 tutorials are going to be the lambda and i don’t know if there’ll be anything else after the lambda um most of this stuff that’s in the style as well that hasn’t been made yet is being transitioned into 1.15 all the materials Have been swapped over there is a new atst model there is a very highly updated 80 dp there’s a new resistance x-wing which many of you will have seen anyway there’s a brand new aat which is looking great that’s in 1.15 so yeah anyway guys thank you and i’ll See you later please check out the patreon if you enjoyed this or if you want to use this build just give it a quick glance because there are some really good rewards in there so thank you and goodbye all right i’d just like to give a big thanks to my current patreon supporters Of the channel the names are being displayed right now on screen so massive credits to them for making this video possible make sure to check out my patreon page in the description if you’re interested in supporting the channel and you also receive a new goody bag every month along with other rewards for The higher tiers so yeah thank you You Video Information
This video, titled ‘”The Ghost” | Minecraft Star Wars tutorial’, was uploaded by Elcestrus on 2020-08-04 21:45:38. It has garnered 16857 views and 573 likes. The duration of the video is 03:36:27 or 12987 seconds.
Build Scale: 2:1 (x2 True Size) Build description: The Ghost, piloted by the gifted Hera Syndulla, was the starship and home base of a small band of Lothal rebels. Named for its ability to travel past Imperial sensors without detection, the craft included many hidden surprises that aided the crew in their fight against the Empire. Material List: (Coming soon)
Fancy skipping the long tutorial process, or want exclusive builds before they’re even released? Visit my NEW web store today!: https://elcestrusyt.sellfy.store/
You can find the material lists for builds here: bit.ly/3ufQdLd
You can also find me on: Discord: discord.gg/KSDQGWj Twitter: twitter.com/elcestrus Instagram: elcestrusyt Reddit: reddit.com/user/ElcestrusYT DeviantArt: deviantart.com/elcestrus
The music used in this video is sourced from multiple incredibly talented artists, both independent and from the YouTube audio library. Individual artist sites can be found below: Music by Tobu – tobumusic.com Royalty-free music – Bensound.com Intro music: “Galactic” – Filmstro | Create custom royalty-free music in minutes https://filmstro.com/