Farrahs – Minecraft Fantasy Builds – Mansion Tutorial – Part 1 of 5 – How to Build a Fantasy Mansion

You okay so the first thing we’re gonna do is start from me back now what I’ve done is just set up a piece of course dirt so I know where my marker is but this will be the very back panel so we want to be making a flat five block gap between two

Screws pillars but a stone brick behind them and one two three four five across place a block then a block of stone then look one two three four five place another spruce place a block and one two three four five place a block turn the corner

And he checks over one two three four yep and then we turn the card out and go one two three four five place a block one two three four five place a block and it’s stone brick one two three four five places block stone brick and it’s one two

Five place a block and then what we’re gonna do is go one two three four five get here one two three four place the block four to four remove this corner and then go one right one two three four five place a stone brick and

One in front of it then one two three four five place a block leave three place block and then you want to be mirroring everything you’ve done on this side on this side now I’m gonna quickly do that you did the same and I’ll be right back to you

Okay so once you’ve got all of those pillars in place what you then want to do is actually build them up so they’re the right height so for this what you want to do is go to the pillar and go one two three four up so they’re five

Blocks high and total place it chisels stone on top and a spruce wood on top of that and you want to be doing that with every single pillar for the pillars that you have stone brick behind what you want to be doing is doing the same pattern but placing one two three four

Blocks on top of these stone so we have five blocks high pillars and you want to be doing that for every single one now I’m going to quickly go around and finish this off you do the same and I’ll be right back to you okay so once you’ve

Got all your pillars in what you don’t want to do is just put in the back layer of wall now for that we’re just gonna position where the back walls are gonna go so for this we’re gonna place a five by five sort of great right angle Cornette right there and then we’re

Gonna go one two three four five there one two three four five here next to the stone pillar one two three four five here we’re going to skip this sense this corner part for now then we’re going to go 1 2 3 4 5 and then 1 2 3 4 5 thinks

That pillar leave the 3 block entrance mirror what we’ve done so fast we leave their place in 5 here place in 5 here place in 5k yeah here turn the corner then 5 next to the pillar 5 next to the pillar 5 in between those two pillars 5

Next to the pillar and five days pillar like so then what you’re going to do once you’ve got all of them in place you want to bring them all up so they’re 5 blocks high in total so bring them up by 4 and you want to do this for every

Single wall now I’m going to quickly go around and finish that off you did the same and I’ll be right back to you ok so once you’ve done all those walls what you then want to do is add in your pillar detail so for this we want to go

Stair facing the whoops of wall then three blocks behind it an upside-down stair on top on the three blocks we placed two blocks on top of that a cobblestone wall on top of that I stay on top of that and then another stair on top of the three

Blocks you placed remove the block placing a stone brick placing a cobblestone wall on top and then a stone brick stair on top of that once you’ve got that you just copy that to every single pillar including these corner bits where you want to be just basically

Placing the pillars down in the same sort of position going there and also there like so so they would continue as they were and then you just want to leave out any pillars here you don’t wanna be placing any here and you just want to be placing them on the actual

Sides here and on the front part here now I’m going to quickly go around and finish off the rest of the pillars you do the same and I’ll be right back to you okay so once we have all those pillars in the next thing we want to do

Is just adding some quick details to the top and bottom of the wall now each of these details will be relative to the actual cobblestone wall behind it so wherever you have the cobblestone wall you just apply the details and to that depending on where it is now

But when we want to place in five stone bricks along the bottom with one in the top in the center we then want to place in a far left underground center underground and far right underground with upside down stairs on top of them I wrote around step on on top of the

Middle stair slabs in the center to fill in the gaps followed by stone brick upside down stair stone brick upside down stair stone brick in between the two Cheers of stone on the upper parts you then place in an upside-down stair another upside down stair like so with

An upside down stair in the center you connect up these stairs using slabs and then what we do we place in a right whereas they’re upside down crying around upside down right way around slabs on top of all of these right around stairs and then what we do is we

Copied this design to all of the relative positions going around the structure where the walls are now I’m not going to quite do the center parts of the detail yet we’re just going to do a few more things before that so I’m going to go quickly around and finish

Off these upper parts and lower parts you do the same and I’ll be right back to you okay so once you’ve got all of those sections in what you can then do is let’s do the middle bit of detail now we have done this in sections to make

Things a bit easier and to explain and then doing that all in one go so what we want to do now is place in an upside down stair cobblestone wall on top right way around stair mirror on the other side place in stone slab a slab number what we’re

Actually gonna do is just remove these two bits here and place in a slab on top a slab will replace where the stab was we also want to place in a slab underneath the two stairs next to the walls so we have this little curved pan

Now here like so we then place in two cobblestone walls with a stair on top followed by stair stair an upside-down stare and then stare stare and an upside-down stare we then go to the back of the structure and place in a wall so no wall sorry a piece

Of log wherever we had a cobblestone wall like so weak then place in stone bricks in front of them just to kind of give their bit of an outline going around the structure now once you have that you can go and copy it to the rest

Of the walls now how quickly do that you do the same and I’ll be right back to you okay so the next thing we’re going to do is just quickly go around and place in these upper parts of the pillars so on the corners we want to be

Placing in a block with a slab on top on all the other sections however are not the other pillars you want to be placing a stair with a slab on top now you want to go around and do the stairs for the slab on top for every single one of then

The court the back corners where we have these double pillars quickly go around and finish that off I’ll do the same and I’ll be right back to you okay so once you’ve got all of those pillar touched on what you can then do is the cornice

Now the corners are very hard and very complicated so you might want to just listen them so first off we’re gonna place in upside down stairs on the chisel stone like so we’re then gonna place in five diagonal slabs connecting the two stairs oh we’re then going to

Place in a block an l-shape of blocks and another block a slab on the first middle and last one like so we then place in an upside down stair here and here placing a slab here here and here so we have the curve like we have had before

Obviously let’s drop this down one so it’s the same as the others like so we then place in 1 1 2 3 4 5 in a diagonal starting from behind the log bring them up so they’re five high like so place block here and here here

And here here in here here in here so we have to like that to just cover up any blemishes place in an upside down stare behind those slabs like so just to make it a bit nicer we then place in a block and another block there and there

Blocking the ground blocking the ground stone brick step on top of that upside down of course then block block slab slab in front of those blocks block with another block on top luck in the ground blocking the ground in front of this two box slab pillar then two stairs attached

To the pillar then one two walls attached to the two blocks a slab on top of that then stair stair upside down stair stair stair upside down stair like so then upside down stair cobblestone wall wrap it around stair upside down stair cobblestone wall like so then we place in our blocks just

In front you make it look a bit nicer then once you have that you can’t be the same design to the other side I’ll quickly do that you do the same and I’ll be right back to you okay so actually during the development when I was building the second corner I know it’s

That I actually made a mistake the mistake was that we needed to actually place in the stone slab here and the stone brick slab underneath the stair like so to make it kind of match in with the rest of the walls now we can quickly

Do it to this one and also this one just quickly add in the right parts like so and then we can add in our stairs so for the stairs you want to start with the chisel stone and place in any stone brick stand next next to it and then

Just keep leading it down until the stairs the floor then when you do the same there and then place a chisel cobblestone stairway going down the center of them like so we can then take stone bricks place a stone brick next to each of the bits of stair like so we

Then also go behind and place in a sort of barrier of two one three do one like so we can place in a few details just to add them in like a stone brick and a stair upside down underneath both little areas like so place in another stone brick just next

To the pathway at the bottom just so when we add in our walls like so it’s a bit more consistent like so then once you’ve got that in you’re pretty much ready to add in the entire grass floor here so you just want to be filling in this entire area lined

Up with the chisel stone with grass I’m going to quickly fill this in you do the same and I’ll be right back to you now that we have all the grass in what we can then do is just add in our final part we’re just just adding in a outline

Going around the grassy part of the structure and this this just makes it a little less bland and gives a difference between the colors actually on the build obviously if you do break any then learn to replace it back so we’re just going to go round and give the structure an

Outline now I can quickly go do that I’m sure you can do it too so I’ll be right back to you okay guys that is pretty much it for this episode we have done everything foundation based for the sort of land for the structure so thanks for

Watching guys hope in German to leave a like subscribe and leave comment and tune in next time we’ll be working on the frame and probably the foundation of the main structure thanks for watching bye