Hello everyone and welcome back to another minecraft tutorial today i have this awesome looking fantasy styled wizards tower i hope that you can build this up for yourself the materials that you will need are shown on screen if you do like the video be sure go down Leave a like a comment with what you thought and consider subscribing if you’re new here so that’ll say guys i hope you do enjoy sit back relax and let’s get into the tutorial so the first thing we want to do as always is get the foundations correct You will see on your screen the layout that you will need for the main tower it’s basically five blocks along messy block and then five blocks down once you have found the perfect location to build your tiller you want to build up from the kernels five blocks high Using stone bricks then connect them along the top once you’ve connected them all all up you want to build three blocks along and one block in the center creating a triangular shape as shown Once this has been done fill in the little corner sections with another block of stone bricks then behind the middle sections we have place a ring of blocks going all the way around Increase this by another two blocks this should give you three blocks a gap then another three blocks going all the way around then we could take our stone brick blocks build them up two blocks higher than what we already have this gives us space to build our circular patterns in the middle Using styles and upside down stairs as shown finally take our stomach blocks once again and add two more layers on top of that This pattern then repeats for another two more sections of our circular window design Finally when we get to the top add a block on top of our stone brick walls then add upside down stairs in the middle with slabs on either side on each of the four walls now add what high field block going all the way around add some stone brick upside down stills On the ends of the hyphen blocks as shown then take some whopped trapdoors and put them in front of the exposed hyphy blocks as shown now we want to take our hivey blocks once again and on top of the stone brick stairs we want to build up by four blocks high That goes on each of the stone block stairs and then take some stonework walls connect up each of the middle sections placing some string on top and that gives a more jagged wool look Use your stomach slabs to connect up each of the middle sections as well as filling in the corners place upside down stone brick styles in front of the hyphae pillars as well now you want to come to the inside of your tower and fill it in with some warped planks Now you need a doorway for one of the sides and a few windows for the others moving up the table we want to fill in the wok planks behind our circle sections that we built earlier you go all the way up to the top until you have a completed cover Moving on up to the roof section now and the first thing you want to do is get some prismarine stairs and prismarine full blocks place in the stairs on top of the stone brick styles that you already have and then connect those up in the middle with some full blocks Connect them together on the corners as shown on screen until you have a first layer of your roof next up place a stair in the very center of each of the four sides and connect those up with some full blocks right behind the stairs that you just placed Now build up your little triangle that we’ve done earlier on with the three blocks along the middle and one block in the center connecting up the little corner section once again before doing the same as we did before with some full blocks behind of that middle block connecting those up bring That up by another two blocks all the way around two more blocks in the center of each of those sections fill in the space in the middle with some full blocks bring those up by one more than you already have two more are going up by three and in The center going up by three as well and we want to add in a little bit more detail to the roof to give it that more pointy whistle to our shape so take some whopped fences and add them onto the full blocks on all four sides of your roof once you Have the fences in place take some chains and place on top of each one of the fences that way it gives an awesome shape to other roof and really fits that wizzle tower theme starting our bottom section take the top right corner of where your door section is coming by three blocks And i leave a gap in another three blocks to form this little circle shape bring those up by two with an upside down stair in the middle place some stone brick slabs in the corners with some stone brick walls on top then use your hyphy block beside each One of the walls bring that up by four before finally connecting those up with some stone brick slabs in the centers and in the corners with some stone brick styles coming from the very top of each one of those pillows as shown but the roof of this bottom section is Pretty much the same as what we’ve done up top but on a smaller scale so take your prismarine styles place them on top of the stone brick stills connecting them up with a full block in the middle then place full blocks behind those coming up by one And then have another one in the center Once you’ve done that come in behind that full block and connect it all the way around bring that up by two on the four sides and in the center bring it up by another three and that’s the roof shape pretty much done again to copy what we’ve already done up Top place some warped fences on top of the full blocks of prismarine going around each side with some chains on top to add that pointed look on the side of this section we want to taper out this and using some stairs and blocks as shown as Mines is hanging over this cliff side i wanted to incorporate that and bring it all the way down but if you’re building this on a flat surface and you don’t have a cliff side like mine you would just leave it something less where it is flat against the ground But as the maze is hanging over i’ve extended it down adding a little bit more character to the build finishing touches for this little section is a stone brick wall in the very center three warped trap doors going along what fences and chains and the corners and that is it Complete now for the final section of our build we want to create another one of these rooms but off to the side over a little bridge so from our second circle design in the very center tower bring it out by four blocks from the top still as shown Then create a small circle with three blocks a gap in the corner another three blocks going all the way around with some upside down stairs in the center Once you’ve done that you want to extend that down by another full block all the way around underneath now it’s time to create an archway for our bridge section we can do this by adding in some upside down stairs at different elevations as shown on screen and this gives a Little bit more of a structural look to it to hold up our secondary room to the left once you’ve got that in place something along the lines of this we want to come to the underside of this room and this is going to copy what we Did before but we’re going to taper this into a singular point again using upside down stairs and single blocks we want to bring this in bother down and and as we go until we get to a single block and under that we will place a stone brick wall with a chain hanging Down from that quickly building up the side section here and it is pretty much the same size dimension and shape as the one we have already built so you can just copy the design until you have something that looks a lot like this and then the build is pretty much Complete at this point but before we can really call it day i think you’ll agree that there is a few more things we can do to really improve this build and make it stand out and one of those things is to add in some texture so here i’m using gray wool Cyan terracotta regular stone and cracked stone bricks and i’m mixing those in to add a lot more texture and variety to the build but i’m trying to keep the darker blocks to the bottom section and that’s where all the kind of mud and dirt and moisture would be So trying to keep that to the bottom and having it fade more as it goes up the tower and that gives a lot more life and texture to the build i’ve also textured out the hyphae blocks using cyan wool i’ve also textured out the roof using some warp planks in place of the Prismarine i think you’ll agree after that we do all this it does really make a vast improvement to the build and it looks a lot better and settled into the environment so hopefully after this you should have something that looks like this and one final thing you can do to really Make your build stand out from the rest is to work on the terrain and the terraforming around the area to make it really settle in and not just look like a build you’ve thrown on top of a mountain somewhere so you can see here i’ve built a path From the front door and i created this man-made type bridge with some spruce wood but i thought it didn’t really go with the theme and color scheme that we have so i changed that all out for some stone and try to make it look like a more naturally Generated or formed archway of stone and things just to create a more natural looking path and i think it really did transform the build and it makes it stand out ten times more than what it did already the final thing to do after this would be to add in some trees Some leaves some bushes and shrubbery and all the natural things that you would find and then your build is done and i really do hope that it turns out as well and you’re as happy as i am so guys with the hat we have come to the end of the video i am Super proud of how this one turned out i’ve added in all the leaves and texturing and everything and it just looks awesome sitting on top of this hill so if you built it i really hope that you turned out like this and you’re as happy As i was and i do hope that you enjoyed the video if you did go down leave a like consider subscribing do all those things because it would really mean a lot to me but until the next one guys thanks again for watching bye You Video Information
This video, titled ‘How To Build A Wizard Tower in Minecraft!!’, was uploaded by BrokenPixelSK on 2021-03-27 17:56:12. It has garnered 262848 views and 7714 likes. The duration of the video is 00:11:34 or 694 seconds.
In this video we build up an awesome Wizard tower design. This design works great on top of a hill or mountain overlooking a fantasy or medieval style village!
Thank you for watching. Please leave a like, comment and consider subscribing if you enjoyed.
Guard Tower – https://youtu.be/f4FSJYZPskE
Approximate Material List: Stone Brick – 192 (3x 64) Stone Brick Stair – 128 (2x 64) Stone Brick Slab – 96 (1x 64 + 32) Stone Brick Wall – 64 Wapred Plank – 272 (4x 64 + 16) Stripped Warped Stem – 96 (1x 64 + 32) Wapred Stair – 32 Warped Fence – 96 (1x 64 + 32) Warped Trapdoor – 36 Dark Prismarine – 192 (3x 64) Dark Prismarine Stair – 32 Stone – 64 Stone Slab – 64 Stone Stair – 32 Andesite Wall – 32 Cracked Stone Brick – 32 Cyan Terracotta – 64 Grey Concrete – 32 Cyan Wool – 32 Chain – 96 (1x 64 + 32) Warped Door – 1 Black Stained Glass Pane – 6 String – 18
0:00 – Intro 0:33 – Foundations 1:17 – Middle of tower 1:58 – Top section 3:05 – Filling in the Tower 3:25 – Main roof 4:44 – Roof detail 5:15 – Small right side tower 7:20 – Small left side tower 8:59 – Adding Texture 9:59 – Terraforming 10:55 – Outro
————————————————————————————————————————————————————– Follow me below for more!! – Twitter – https://twitter.com/BrokenPixelSK – Instagram – https://www.instagram.com/brokenpixelsk/
————————————————————————————————————————————————————– Credits:
Music: – Fake Fan by Harris Heller – https://www.streambeats.com/ – Bucket List by Harris Heller – https://www.streambeats.com/ – Sarahtonin by Harris Heller – https://www.streambeats.com/
#Minecraft #gaming #minecraftbuilds #tutorial #howtobuild #minecraftwizardtower #minecrafttutorial