Hypnotizd – Minecraft Mods FTB Infinity – IRIDIUM ORE CREATION [E58] (HermitCraft Modded Server)

What’s up everybody welcome back to another episode feed the beast infinity on the hermit craft server so guys last couple of episodes we’ve been working with ic2 we got to the point where we made a mass fabricator and we’ve been making some you you matter so let’s

Check out how much you you matter we’ve made since the last episode let’s see if we right click on here still working still doing stuff we made 2269 Milla buckets so that’s pretty good so 2200 if we look at our crystal memory here this says that 1uu mater equals 120 millet

Buckets so how many you you matter have we made right now that’s like about what 20 22 I don’t know somewhere in there roughly 20 so you know it takes about 2 days to make 20 so that’s like 10 day which is okay but if we’re gonna make

Like those solar panels and those top-end gears and stuff like that from ic2 and all of those mods that use this stuff where you need to make this a lot faster so last episode we saw with the recycler we can put items in here recycle it gets scrap scrap is used as

Our amplifier for the mast fabricator which will make it go faster so I think the first thing we need to do is make a bunch of recyclers and start feeding those items to make scrap yeah that’s what we’re gonna do so what I think I

Want to do is set up one of our little areas over here probably this middle one will probably make a whole line of recyclers here I think and then we probably have our mass fabricators up here or back here one of the two we’re gonna move our liquid storage we’re not

Going to use this as a liquid storage place after all I thought we were going to but like I said since we can fit so much in these liquid X or I’m sorry and these bedrock iam drums there really isn’t a whole point in doing it yeah I

Mean it would be cool to have like huge tanks and stuff but I don’t think this is gonna be the place to do that okay so we need to make a bunch of recyclers I’m probably gonna make ten of them I think that’s probably a good number to start

With we can make more later on but yeah I’ll make ten recyclers I’m gonna make the upgrades I think we saw that these could take seven overclockers without any additional upgrades so I make a bunch of upgrades for those yeah let’s get started on this guy so let me make a

Cut here I will make some machines get things going and we will be right back all right guys so I made ten recyclers and we got them in place back here each one of these has three transformer upgrades I believe the recycler by default accepts 32 eu1 transform upgrade

If I remember correctly bumps it up to 128 to transform upgrades bumps up to 512 and three wood bump it up to 2048 I think that’s how that worked in the past so anyway we got three transformer upgrades in each one of these machines and seven overclock or upgrades for now

I might expand these out later but if we go down behind that Bank of machines over here I made an mfsu and this guy outputs 2048 EU would take that’s what we have the over or the transformer upgrades we don’t want any of those machines to blow

Up I don’t know if they blow up there’s a config sitting I haven’t looked at that’s enabled on this pact probably isn’t anyway we want to make sure everything’s set up properly so we have the transformer upgrades because we have a high power output here this can store

40 million EU and then we also have this glass fiber II cable right here and that stuff it’s a post to carry like 8000 EU would take yeah I don’t know if you is still doing packets or if that’s just like the maximum amount of power that

That cable can handle at a time or how this all works anymore but I’m just going off of what I remember from the past so transformer upgrades in each one of these machines otherwise we’d have to get like a actual transformer and split off the power and that’s just a whole

Thing I don’t want to deal with so now the next step is to get power in the mfsu okay so let’s start working on this we are going to want one of our tester racks again and we’re gonna need some of that have red net cable and there’s some

Things I want to test with this before we get really into it so let’s just start off very simple I’m gonna put this test racked let’s see where do I want to stick this thing I guess we’ll stick it here for now so let’s get this thing set

Up to some main base power or energy mood receive-only everything should be fine so if I attach what he’s redneck cables we should start powering our system up over here yes we are in fact getting power into this so I’m curious we see how fast or slow or

Whatever you want to say this power is going if we connect multiple sides of this tesseract to multiple parts of this cable does it go faster I don’t know now if I put a cable here first thing can I separate it just by right-clicking on it

Well that’s separate no can I put a micro block there to separate them I’m not entirely sure how this works let’s do there’s a cover or as a panel I think it might be cover cobblestone cover let’s try this can I put a micro block right there

No but won’t let me do that basically what I want to see is if I connect multiple sides let’s try running this over like this does that make this go faster it’s kind of hard to tell isn’t it whoops didn’t mean to get rid of the test right let’s put that back real

Quick oh yeah that was definitely going faster with two of those connected yeah that’s kind of what I figured I suspect this redneck cable can only convert so much RF to EU per side or per connection or whatever so we have multiple connections I think would be going much

Faster yeah that definitely seems like that’s faster okay so let’s get rid of this and I think what I need to do let’s get rid of that in that for now just temporarily we’ll run this a long gray like that I’m actually not sure if that’s much faster or not the mfsu might

Have a maximum input or we might be reaching a limit on our power supply yeah another thing we could try and connect it to this friend here but again we’re running out of connections and these cables I don’t know maybe we can do that or something I don’t know is

That gonna go faster at all or is that gonna mess things up actually I’ll it looks like that is now constantly going at a speed right that just doesn’t look very pretty so we’re gonna try this I didn’t mean to connect that last cable there we’re gonna try

This let this mfsu power up that should be powering our machines everything should be connected over here so each one of these are powered ok very good so the next thing we need to do is actually get items into these recyclers it so happens we have a bunch of igneous

Extruders from the past from making the octuple compressed cobblestone I don’t know if we’re gonna put one on each one of these machines or if we just need one that’s gonna feed all of them well I do know is that these things can’t produce

A stack at a time um yeah I think they go on to the top so let’s put our igneous extruder over here you will just stick that little fellow right there we’re definitely gonna need some lava I’m not sure if I have a lava bucket I

Don’t but I do have a love of fabricator already set up I can go grab a lava bucket from so we need item ducts will use the impulse item ducts just to make things go faster guess we put a cover we okay so we will do this all the way down

Here all right we’re gonna need a resonance but we don’t need a resonant but we’re gonna use a resonant servo just to make sure we are sending items as fast as possible so you want to eject to this OOP clues that clues head huff getting a

Little bit of lag I think and ignore it okay so this should be pulling out all the cobblestone and sitting it over to use recyclers this is gonna be making a stack a cobblestone at a time when we get that set up let’s put a bucket of

Water in there and let’s go run over real quick and let’s get a bucket of lava over here from our blood-magic area scrape that right there perfect okay very good so as soon as I add that lava things should start happening we’re gonna be producing scrap pretty quickly and lava

Okay okay there you it looks like we’re getting a little bit of server lag things are kind of slow there for a second another thing I’m curious about is this particular servo we want this to be set to round-robin and we want to stack at a time so that

We would be putting in a stack here than a stack here here here here all the way down then we’ll start over at the beginning again okay I think that’s probably gonna be good so it sounds like those compressors are doing things let’s take a look at them from over here yeah

That one just got a stack okay I don’t think we are making cobblestone fast enough yeah these are actually making are these are actually recycling cobblestone faster than that resident thing is putting in so we might need more than one or you might just put in

Each recycler has its own is an igneous extruder on top of it yeah cuz one definitely isn’t enough okay I tell you guys what let me mess around with this a little bit more try and get things figured out and we’ll be right back alright guys so I couldn’t take it

Anymore I went into my configs my local can fix for my client I turned off the I see two sounds I know everything makes sales and it’s pretty cool but my goodness I couldn’t take it anymore I turned them all off so when I set up over here is our canning machine once

Again I have this setup and we are pumping in lapis lazuli dust is mixing it with this water it is making ic2 coolant over here in the tank and we are pumping that directly out of the candy machine into an icy qu IC qu IC to coolant

Bedrock iam drum so yeah we’re storing up a whole bunch of this so I can’t be the overclock or upgrades much quicker in the future but yeah I just figured we might as well stockpile a bunch of that stuff so we got a bunch of lapis lazuli dust being pumped into the canning

Machine as well so I’m gonna leave all these pieces over here what I am gonna do think it’s time we disconnect our mass fabricator I do want to save the the liquid you you matter so let’s grab a tank couldn’t think of the name of that for a second there let’s

Just grab ourselves a tank we’ll stick that there yep very good and we will get a fluid duct grab a servo in the heart and fluid duct okay and we’ll go ahead and just disconnect this power over here as well yeah be careful not that those machines okay so yeah I believe we

Should be just be able to pump that street out yes we can very good so there is a little over two buckets worth of the liquid you you matter so that’s pretty awesome so we’ll just go ahead and see then take that with us we do need to use this

Wrench from ic2 to remove the machine looks like we got our overclocker upgrades and i transform up creeds out of there as well which is awesome I’ll take that this range is just about broken there is an electric wrench that you can craft so you can recharge it but

I don’t have any of the like I see to charge pads or any of that stuff going at the moment so we haven’t made that wrench yet but I won’t ask you in the future okay so let’s head back over here and I’ll show you guys what I’ve done with

Those recyclers real quick so again that’s the front you can see they are all on now which is awesome I did increase the upgrades to nine I was going to put in 11 they could all handle 11 without drawing too much power or I guess running low on power on the

Machine itself but the problem is when they all had 11 in there we were losing power in the mfsu over here so we were just drawing far too much power so what I did is I reduced each of those overclockers in there to nine and we can

Still gain just a little bit of power so that’s about as fast as we can go with this redneck cable setup once we are to the point we’re making our Iridium and we can make those solar panels that make EU directly yeah we will be able to

Power these things much faster and it’ll be a little bit better but currently I ended up just putting one Ignace extruder on top of each one of our recyclers so the air all seeing stacks of cobblestone ahead of time and just dropping it into the recycler down below as far as the scrap

We have impulse item ducks over here with one resident retriever which is pulling out of each one of these machines I do have the set to round robin if you set it to nearest first it’s gonna pull out this machine then this one’s then it’s gonna be like oh

This machine has scrap again and this one has scrap and I’m just gonna keep bouncing back and forth and like the ones at the very end will never get their scrap removed so yeah I haven’t sent around Robin so checks each all these machines and then it just yeah it

Keeps looping back and forth we’ve made almost 20,000 scrap right now which is pretty awesome so I’m just gonna let this go we’re just gonna collect scrap in our deep storage unit for now the next step is let’s put our mass fabricator somewhere I’m thinking we’re

Just gonna stick it here for now I don’t know if there’s a better spot for it I mean we can always move it leader and I think that goes there and I think we’ll do this from the outside just so I don’t point it’s in a different direction I

Think eventually we’re gonna have multiple mass fabricators I think that’s what’s gonna happen so we’re gonna stick that right there we might do I’m not sure how many we’re gonna do I don’t think we’re gonna need a whole line of these I guess it’s just gonna depend on

How much you you matter we can make when we’re feeding it as much scrap as it can take so we’ll figure that out let’s put these transformer upgrades in there I forget I couldn’t put in the overclockers right yeah won’t accept that I’ll figure out there’s any other

Upgrades we can put in here I really don’t think there is but I do want to get one more transform upgrade just to be doubly sure that we aren’t feeding you too much power although the last time I used mass fabricators I do believe they could hole or they can

Handle 2,000 you a tick or packet or whatever that was just fine anyway let’s get this hooked up so we have our master fabricator here we need to get the scrap over to this side I need to figure out how we’re gonna do that we might end up using a tesseract

Or something which would probably be the easiest way so will tesseract our amplifier over here we need to get power into this machine and get that going so let me make a cut here guys I’ll do a few more things off-camera try and get this all figured out

And we’ll be right back alright guys so things are happening here we got a mass fabricator going we have scrap going into it so it is making some decent progress yeah the amplifier is doing its thing over here we’ve made 56 milla buckets already which is pretty quick

Considering that’s only been going for I don’t know around 10 minutes or so so this is the way whoops I’m in the wrong section this is the way we have this one set up so we just have our tesseract from our main base power we have a red

Net cable coming down into an mfsu over here and then we have the one connection going into the glass fiber II cable that goes over to our mass fabricator so yep that is pretty much it I don’t know if I connect multiple sides that makes it go

Faster or anything like that I actually never even try that probably doesn’t probably does not it doesn’t look like it’s going much much faster anyway I don’t need that glass fiber cable at the moment we’ll just leave that there so our men’s fabricators doing stuff I just have a tesseract over here deep

Storage unit resident servo into an impulse item ducked into a tesseract we’re sending scrap through here we are still gaining scrap even though we’re using a bunch of it through that mass fabricator so yeah and then this tester X right here is just dumping the scrap

Into there okay so I was looking at the next thing we need to do if we’re going to make anything with is you you matter and we’re gonna need a replicator so I was making all the patterns and all the little bits and pieces for this thing

Replicator here so we have to make HV transformer MFE these teleporters which aren’t super complicated to advanced machine casing glass-fibre advanced circuit and this frequency transmitter just Sirkin copper cable so this isn’t too bad we already have like the reinforced glass made but then we got to the

Reinforced stone I was clicking on it like there is no recipe I can make stuff with it actually what can I make with this I didn’t ever even look to give me a pair of storage and I rep like yeah right obviously the replicator okay so in

Order to make this reinforced stone I had to look this up because I’ve never done this before we have to use a CF what is this a CF sprayer a construction foam that’s what that stuff is so to make a construction foam sprayer actually isn’t that bad I didn’t make

This I did not make the universal cell pattern let’s make one of those we will actually craft one of those up so we can make our CF sprayer put that in here and let’s craft it oh I can’t craft it okay Universal cell next I guess I just don’t

Have all the parts made all right so then we will make this guy right here so that’s iron item key saying plus a universal cell great so now we have that done okay I’ll stick that right here that’s a CF sprayer next start sweet so we get ourselves

Like a little gun looking thing well you can’t really do anything with this at the moment I do believe we have to fill this up it says it’s empty we fill this up I believe with a CF powder which used to be called CF pellets and the recipe

To make that is stone dust whoops stone dust clay and sand I believe we have everything except for the stone dust and it looks like that comes from a thermal centrifuge or an or washing plant I think this is how you duplicate ores with IC – or like triplicate ores I’m

Really not entirely sure because I haven’t messed with any of this stuff anyway we do have a thermal centrifuge made so if we get some of this crushed stuff let’s see what else little sweeping is more the crushed we have a cobblestone in there looks like that

Gives us one stone dust / cobblestone more of these different ores or anything else cheaper or easy to make nope doesn’t look like it so we’ll put cobblestone in there so thermal centrifuge I don’t think that’s over here anymore okay so again we’re gonna set up temporary machines back over here to get

Things going we just need to make enough of that reinforced stone to make our replicator thermal centrifuge so we’ll bring this back over to our other side yeah it’s kind of moving all the ICT machines over here so they had a proper place but we still only have the power

Infrastructure set up so not gonna work at the moment so thermal centrifuge this thing will charge back up with power yep all right so I think it said we just put stone in there right so it’s heating up kind of slowly but it’s heating up and

Then is this gonna take three years okay I guess we’ll throw on some overclockers maybe I could go faster just a little bit faster you know what we might even need oops I don’t know if the transformer upgrades will work in this machine or not if that’ll make it accept

Any more power than what it’s currently accepting we’ll just throw those in there yeah it doesn’t really look like it I think the redneck cables actually kind of our bottleneck here but we’ve made some stone dust so I can go ahead and get our pattern going for the CF

Powder so there we go so now I just gotta wait far enough of the stone dust to get some of the see if powder going and then we can look at making some construction foam stuff so yeah let me wait on this machine a little bit guys

Get some stuff going here and we’ll be back all right guys so I made the CF sprayer and we got some CF powder going nice thinking we just take this and put it together in our crafting grid like you used to do with the CF pellets or at

Least that’s what it showed on the wiki but I don’t think that is the case anymore so I think what we’re gonna have to do is put it in here and that in there yeah okay so that has 1,000 millets I don’t know how much this actually holds that’s

Tooth okay so let’s just go ahead and put it all in there three okay here we go there is a little bit of that so I made some iron scaffolding I believe we have to spray this with the foam so let’s try this so if I right click okay

So the whole thing oh and I didn’t use all of the foam in there okay very good very good so I think what I’ll do let’s just go ahead and place the rest of these down here we will spray that with the foam we have to let this harden

Over time so I’ll take a minute how much we got yeah we didn’t use that much at all okay yeah this will take a minute these blocks will change to a different appearance when they harden I believe it said we can take some seen and actually

Click right click see and on here to speed up the process oh that’s actually gonna make that instant okay so that’s pretty cool I didn’t know that that it would be instant but awesome and then also said this has a hardness of obsidian so I’ll take a minute to break and that’s

Actually not too bad with this tool that we have here so I’m going to go ahead and make our replicator use these items for that recipe get the recipe all made yeah let’s get that done and we’ll be back guys all right guys so a few more

Things has happened here I did make a replicator but the replicator can’t really do anything unless you have a pattern storage so what the replicator does it’ll read the pattern from the pattern storage but again you have to have one for to read that so I made a

Pattern storage I put a crystal memory in here and then I click this down arrow that says import from crystal so now we have this thing stored in a pattern storage our replicator can read that pattern by just clicking next or last or whatever there’s only one pattern in

Here so what we need to do is actually start making things so it’s ready for to make the you you matter we need to put I’m sorry it’s ready to make the redeem or from you you matter we have to put that you you matter in here so let’s get that going

I’m kind of curious if this is gonna work fast or if it’s gonna be slow or how this is all going to be setup yeah here’s a replicator and there’s our pattern storage I mean I’m having problems speaking today so you you matter tank this has just over 2300

Millibar cats in here so let’s grab a fluid duct hardened the fluid duct I’ll do that I assume we’re just gonna be able to pipe into this thing again I’ve never done this so we’ll grab just a resident servo or reinforced servo actually we’ll work through that there

And ignored so we’re sucking up into this thing yep it’s filled the tank perfect okay so now we have you you matter and we have the pattern ready to go I assume stop single run repeat run let’s click single run okay well that’s actually one second why is this a EU

Zero percent is it going to oh no it is using you you matter okay alright so maybe what it does is it goes to a hundred percent and then it makes uses energy to produce it I don’t know let’s grab some upgrades here make this thing work a little bit faster maybe alright

There we go oh that’s it that’s all we need to do to make an Iridium huh let’s try that again well if we can do a radium that quickly huh okay well that’s awesome that was way easier than I thought it was gonna be I’ve never seen that this is not

Increasing here I don’t know scuzz I have to me these I don’t know why it’s not gaining power right now maybe just because as mass fabricator is taking too much power I don’t know but yeah it looks like this is gaining power just a little bit so that’s interesting that is

That quick to make a radium or huh so the next step that we need to do is to pump out the you you matter that we’re making over here directly into the replicator and how this make as much as we possibly can in fact I’m just gonna

Do repeat rikes a think that I’ll just continually make the stuff I’ll just throw a couple upgrades in there so I’ll just make as much as it possibly can so yeah we need a pump to you you matter out of our mass fabric heater okay so

Now I can finally get rid of this cable let’s be careful where I’m aiming my hammer nice yeah so we need some more fluid ducts whoops fluid duct and over time not only are we gonna be just making that you you matter we are just gonna be producing

Radium or and that’s pretty much all we are looking for at this moment servo will be able to speed this up as soon as were able to make our solar panels and make more EU so what do you that that’s filling up this tank which fills up over

Here and now we have well we have one iridium or looks like one of those overclocker upgrades is too much for this system to handle at the moment so yeah I don’t think we need to make it much quicker than that I believe are using to you you matter faster than

We’re actually producing it over here once ice it’s a hundred percent makes a one mil of bucket so yeah we’re definitely using that quicker in fact I could probably take out all of the overclocked or upgrades and just let this thing run yeah I think that’ll be

Fine all right guys well I tell you what we’ve done a lot of stuff with ic2 we finally are to the point where we can make a radium that is awesome i am super ready to start making solar panels and getting this system going way faster but

Yet I think that’s all we got time for for today thank you guys for watching remember to leave a like on this episode if you did like it and we’ll see you next time thanks for watching guys bye bye