In the previous episode we made use of the clay wastage from the Glass Factory that we ended up compacting baking and getting some terra cotta that we then went ahead and covered to create the Terra Cotta Factory but even though we have buol planned for this area we’re going to Leave it behind and head for some greener pastures where we will be building a green house that we will use to gather all these flowers all in preparation for a future project so Greenhouse we will be building a green house so we can build a flower farm so We can get some flowers and where will we do that well currently we’re based in this area over here if we follow this train track we’ll get to the Mesa over here and if we just go straight up from the Mesa we have a flower forest in that Area over there so we will be building a flower F I think in this area because it’s a straight connection all the way to the Mesa which we will need in the future so for now there’s no easy way to get there and I am planning on building A train but it’s not going to be this episode so what we’re going to do is we’re going to hop on down come into the room and I took the liberty of connecting up a a few of these wall plates so if we need to go to the flower Forest we can just stand over here and Boop we’re right over here in the flower Forest but before you we can build anything over here I guess you guys can see we need to clear out a bunch of trees so I’m just going to grab my Pickaxe put on some music and just rip out a bunch of trees and I’ll see you guys as soon as I’m done so we’ve cleared out a big enough area and we’re not going to gather all the flowers I mainly actually want the corn flowers and all these other ones are Added bonus so what we need to do now is maybe level out the terrain a bit get some digging done in this area and then we can build ourselves a little flower form but I want to try and dig out this hole in a different way and we’re going To do it via schematic so let me set it up and I’ll show you what I mean okay so we have the schematic in place and as you guys can see we’re going to gather some corn flowers we’ll get some of the gray daisies there we’ll get some tulips Over here three different types some of those l flowers and even the aliums but a part of this is underground and we need to take out that part so what I’m going to do is we’re going to take the schematic now that it’s in place we’re Going to pop it into the cannon and we’re going to go to the printer settings and we’re going to pick replace solid with empties so basically what that means is as soon as the cannon approaches one of these blocks and it’s not supposed to be a solid Block it’s Supposed to be air it’s just going to replace it with nothing so in theory it should dig out the hole but the only way we will know is if I can put in some Gunpowder get all the resources together and just test it so I’m going to test it I don’t know if it’s going to be possible to do a montage because it goes from the bottom up but let’s see let’s see what we can do He And with that I would say it works it’s definitely something different from your normal digging of a hole but it worked and everything we need is in place so what I can now basically do is gather all the create components place them in place get everything automated get some Power in here and then we are almost there we are almost ready to start a flower farm but there are a few extra buildings that we need to do and a bit of preparation we have to do for those but I think let’s first build a flower Palm Base and then we’ll plan the other components that need to get at it so let’s gather us some resources okay we have all the resources and it’s time to get building so first things first on these blocks we’re going to place deployers and we just want to make sure Yeah that they’re facing the right direction so basically this is wrong they just need to go up like that like this so we have the filter on the side and the input on the on the length of this form so now we can just go ahead And just do those and then we do the same on the other side and then while we have them in we just want to make sure that their filter is set to bone meal because we really just want them to take bone meal then on the inside of each of These deployers we’re going to stick a funnel so now we’ve got the deployers that will be deploying the bone meal and we have the funnels that will put the bone meal into the deployer is but now we need to add the belts that will transer all the bone meals so on each of These we’ll have only two like this on either side and in the center line we will actually have a belt running down the center like this and like that so if I were to add belts this would look like that that would look like that and this Will look like this and this will just continue past all the way to the end so simple like that so I’m going to quickly repeat all of that so now we’ve got the transportation of the bone meal along the Bel and the distribution set up but We need to add tunnels onto these um intersection make sure they’re set around Robin so that way one bone wheel will go this way the next one will go that way and the last one will go that way and we repeat thus ensuring that we do distribution throughout the system Until it fills up so now we’re just going to do that on all these intersections and that’s it so from here on we will have a system that just takes the bone meal back to that side into a different form that I want to set up Maybe in that area I’ll just see where that goes and then we can also then repeat the process where we take it back and just recycle it so it goes back all the way over there and then comes through the system again the next thing We need to do is hook up all these deployers so I’m just going to do this I’m just going to run the shaft along these in between all of these deployers like so and then we’re going to repeat it on the other side just like that now We’ve got all the deployers and over here we’re going to pop down a gearbox and we’re just going to run another set of shafts all the way to yeah with another gearbox on the edge that way we have one power input and that should power everything else but You see one power input would be okay if we were only going to power the deployers from this point but instead we’re going to have a system that runs back and forth so we’re going to add another point of power on this side over here so we’re going to have to add Another gearbox we will not be adding connecting this one to that side because we already have it connected there so it will be unnecessary so this should do next step we’re going to do a temporary block over there a clutch on top followed by a vertical gearbox facing Into it and this will basically be the thing that powers the system and allows the deployers to Fire and we’re going to repeat this little Gadget all the way over there so there we have it two power points when the machine reaches the side it will power and it will force Everything on all the deploys to Fire and it will return and once it reaches that side it will do exactly the same it’ll touch that base it will force all the deployers to fire and repeat the whole process so the way we’re going to power these little contact points is With some Redstone contacts so the first thing we’ll do is we’ll put a piece of redstone down there and we’ll put a redstone contact on top of it and we just need to make sure that it’s facing the right direction so let’s just do that cuz it needs to face up like that And that’s it just like that so once the machine comes over the contact Point touches it will send a signal down here so how that’s going to work is we’re going to have Redstone run down we’re going to have it run all the way over Here over here we’re going to put down a powered latch which will then turn on and the powered latch is quite simple power going in this side will turn it on like it’s now and power going in on this side will turn it off so technically whenever the um Contraption comes over It touches the Redstone contact it will send a little link it will unpower this making sure the clutch will allow these deployers to fire but then we need to turn them back off again so all we’re going to do is we’re just going to add a little pulse repeater we’re going to put It to 30 Texs and then we’re just going to do redstone there Redstone there so basically again it will fire this will turn off the deployers will run and after 30 ticks this will fire again turning it back on so that’s it that’s it for the little Redstone part but now We need to repeat all of this on that side so now we have the little Contraptions that will power the deployers set up on both both sides and we have one more thing to do over here first of all we need to transfer power from this belt to that belt to ensure That they’ll continue taking the power and then we just need to add a shaft in every single one of these Corners followed by two gearboxes on both sides so that’s again shaft gearbox gearbox and just running all the way down the line and how are we going to power this System well with water wheels so right over here we’re going to put our little rotational speed controller and we’re just going to add a bunch of Wheels running all the way down here I think it’s 10 exactly we’re going to put our bigger chain drive in there we’re Going to change this up to 64 and then from here we’re just going to send the power over here where we’ll rip out the temporary little block we’ll put that one in over there add a little vertical gearbox and that should be powered on this side now to power the other contact Point on that side we’re just going to come to the back over here give ourselves a gearbox and we’re just going to run shaft all the way over there once we reach that point this point it will be a gearbox vertical gearbox remove that and add that and now this point is Also powered so these gearboxes these shafts will run at all times but they’ll only fire once we touch that contact point which will only then deploy the bone meal by the deployers next step we need to hook up this little partt over here so what we’ll do is we’ll rip this One out put in a gearbox vertical gearbox vertical gearbox and a shaft and that should be it that should be everything powered and ready to go I have two blocks over here cuz these two blocks just just only shows which side we should place the water for everything To turn the right direction so let’s grab some water and get the system powered so now that we’ve got the water in the water wheels we can see everything’s turning and everything’s going the shaft controlling the deployers are standing still they’re not moving but the one down there and Running over there there is moving so now we’re just going to place a redstone a redstone contact it’s very important it needs to be be placed and broke and broken immediately otherwise the contraption will break and that’s what exactly what will happen with the contraption harvesting the flowers it Will come over it’ll touch the point and will instantly move it will not stop here at all so if we place this down break it you see it fires and then it stops which I think is just the right amount of time on 30 ticks over there But we will test it bit more but that’s basically it for this part so what I’m going to do is I’m going to add a vault put some bone meal in there and then I’m going to add the grass and we can maybe see if the firing mechanism works and if We can get some flowers growing on top of grass so we didn’t have any grass so I had to cover all of this with dirt and had to wait for the grass to grow and while we waited for that to grow I went ahead and dug this little hole and Prepared this area for the bone meal part of this farm so between episodes whenever I go caving and I find a SP skeleton spawner I pick it up and I just put it in my inventory for if and when we will use it and we finally got to a Point where we’ll use it so we’re just going to do a basic mob farm over here with Mobs getting pushed over they’ll go into this mechanical saw which will then saw them up and kill them all their parts will go into this Vault uh bone wheel will go down into system it will Get destroyed with the grind mols the other stuff will end up in lava in this area and the bone meal will come up all the way to this area over here where it will enter the storage system and from there into the Vault and distribute it Along this B here so I think the first thing I’m going to do is fill this up with a bunch of bones that we brought from the other spawn over there and then we can test the bone meal part of it and in this little part I’ll build off Camera maybe do a little Montage because we’ve done a Mob form before and there’s no need to repeat that so let’s quickly get the bone meal in test this so I’ve powered up the system and we we finally have bone meal going into the system and it looks like it’s Distributing Properly so that one should go straight on yes and the next one that comes through should turn to the right there we go I do think we can maybe put this up a bit higher let’s make it maybe 16 and let’s just make it split I don’t think we should make it round Robin cuz now it will split but these are full so it will rather send on to the next one okay so I’m going to finish all of these I’m going to wait for it to fill up and then we can test the whole farm and see if it produces flowers okay so We need to simulate the machine going over this so I’ve got the Redstone contact in my off hand so if we place this down and mine it instantly we get flowers and it doesn’t look like a lot now but if this runs passively in the background it will will Eventually add up and we will should get quite a lot of flowers we don’t need that much if we can do one draw filled up I think that’s about 512 flowers that will be more than enough but now like I said let’s quickly get that mob farm in And get it closed off so we can just get bone meal Farm going as well so the mob Farm’s working we’ve got skeletons being crushed it is a bit ligh over there but I do think it’s because of the lava so I might see if I can sort that out somehow But apart from that we have some skeletons getting crashed we’ve got bone meal flowing in and it’s slowly climbing up uh which is good which is good I will add more skeleton spawners if we find them but the next part we need to do is harvest the flowers and for that we’re Going to have to get a contraption that runs from one side to the other side and I’m going to do exactly that I’m going to use a mine card Contraption to make this work so I think we need to gather the resource I’ve got some of it on me Already but I need need to go through my inventory see what I have and what I want to use and then I’ll bring you guys back and we start building this I got a bunch of resources gathered up and I’m ready to build this Harvester so let’s Jump right into it so first of all this is the center of the farm and I know that the contact points over there so we’re going to start with that and we’re going to place our contact Point facing down like that and let’s just clear out this row next to it because technically This is where the Harvesters need to go we’re then going to run a row of Anders side casing along here all the way and I think we can even change one or two of them into barrels maybe this one we can make a barrel I opted for a vault Because I think it just adds a bit more to that whole industrial feel and let’s just do one on that side I’m wondering if I shouldn’t add another Redstone contact on this side just for symmetry sake it’s not going to have a function so for symmetry sake we’re just going to Do that there we go and then let’s make these bolts three long like that and then I think the the center I want to rip out to do something different so let’s do two shoots like this and that like that and now this should be enough to actually get the contraption off the Ground I do believe all of that can be glued together I might actually rip out these three and just move them up one and let’s just let’s just add another Vault there’s no harm in that and we do this one over there and this one over There um why is this one doing that it’s not supposed to let’s just try that again there we go yeah yeah yeah yeah that looks better okay then Harvesters we’re just going to have them on either side like this and like this so this will just Harvest all the flowers and The grass and all of those kind of things which is perfect and now what I want to do is I just want to take it up cuz I actually want the track to run overhead and not on the ground itself so I’m going to use a Contraption so the best thing might be In line with this cuz we really just wanted to touch and this is the center and I don’t think it should be too high what is that that’s 1 2 3 4 5 I think five high is good I think that’s perfect so what I’m going to do is I’m going to Go six High and the reason I made one high is because I want to do copycat panels like so and then we’re going to run the train tracks or the power rails on top of the copycat panels so now we just need to run these across so we got Our copycat panels over there and then on the edges we just need to do a full block which I think I might for now just do these that’s fine let’s just do these for now we’ll sort that out later and let’s do the other side it’s Just so we can just get this up and going and then we’ll run power rails all along this okay I’ll fill that in but now that we have that now we can look at how we’re going to connect that to the Mine Card Contraption so we’ll have the Little assembler sitting over there and then I added another shoot over there I moved the shoot from the side and now what we can do is we can just right click that with a shoot right click with a shoot on that side so that gives us Almost like a little bit of a claw effect I wonder if I can do if we can do shaft oh yes and the shaft can go into those okay that looks cool that looks cool so let’s do this so they kind of feel connected I do Like that but now I’m wondering can’t we make this base look a bit more solid by ripping this out and rather doing this like that I do like that a lot and I think we should add some of those over there and just maybe do that yeah that Looks like a pretty decent industrial Harvester now we need to connect it to the top and I think the best way might just be to run more shoots up there and then to get some form of cover on that we do some half slabs there and the texture we Give them is there block of IND industrial iron and I think that looks pretty pretty cool so now we need to glue all of this up see to getting some more powered rails in here and powering up these rails somehow and then we have a complete machine so I think I’m going To get the rails in glue it all up and then we’ll I’ll bring you guys back it was a mission to get this contraption to go as you guys can see there’s like a little leather on the side which was a headache and also a lot of the shoots And stuff changed their State as soon as this moved so they disconnected and I had to change it a bit I still like it I still think it looks pretty industrial it still works like a machine but yeah I don’t know if I’m happy I don’t know if it needs a bit Of work but we still need to figure out the storage and before we do that I think we should actually build the building itself and get a structure in place and then once that’s done we can easily see where the storage needs to go so let’s do it let’s do a little build Montage P PA so we currently have shaders on for this part because I think this building looks 100 times better with shaders on in general I feel that way about all Greenhouse builds I’ve done some before maybe I’ll link it up there but just look at this build let’s Just get some distance oh I just love this build I think it looks so cool I love the combination of glass and windows and the darker trim and just these little squares that form every now and then and we use this one is a door I’m not fond of that door I’ll see if I can find a different one but apart from that I love it and then the gables I mean that just looks so cool with those windows I just think it adds something to it and just this minor little detail Of the slope in the roof and then we hide the slope roof behind it at the back it’s just been covered up with a lot more dirt just to make it look natural in the environment and I think it worked out quite well but let’s head On to the inside and oh just the roof as well just look at all the glass the like little divisions showing where what goes for what and I just think it looks quite neat but anyway let’s go inside so if we head on in here inside here we do have The flower farm and I know there’s still a lot of room for decorating but I maybe want to add to this because we currently don’t have a two tall flower farm and I think I can add one in this area maybe against one of the walls I don’t know but we it’s been running it’s been running for quite a while and we’ve got so many different flowers I added upgrades to these and I even voided some of the seeds because that’s ridiculous the seeds I’m going to turn into uh bone meal as well so we add some More to it and but let’s just quickly go see how much bone meal have we used we need to push F1 yeah we’ve used about I would say a good 7,000 bone meal which is quite a lot so I need to find a way to turn all this contraption and in I’ll AFK in this area just get some more bone meal going but I don’t think we’re going to run out of flowers anytime soon but yes I love this area I will add some more lights to it and I want to do some like hanging shelf shelves in between These columns like so we’ll have like little Spruce shelves hanging down with some more pots on it but like I said I first want to see if I can’t add a Too Tall flower farm in here and just sort out this area but as the sun sets on This area I would like to say thank you for watching and do remember like And subscribe as it really helped me out a lot we didn’t do any supporter tunnel activities this week so next week we will do double the amount of supporters so if you haven’t yet comment down below Be part of the community and join the Discord and maybe you’ll end up in the appreciation tunnel next Video Information
This video, titled ‘I built Greenhouse FLOWER FARM Minecraft Create Mod!’, was uploaded by Deosil25 on 2024-03-04 16:00:14. It has garnered 2942 views and 187 likes. The duration of the video is 00:23:59 or 1439 seconds.
I built working Greenhouse FLOWER FARM using the Create Mod in Minecraft! Come see as we add the FIRST FARM in the new Flower Forest Industrial Area!
Create Modpack by @MrBeardstone
MOD Link: https://www.curseforge.com/minecraft/modpacks/create-perfect-world
Find me here: https://discord.gg/yKcXDGRN6V https://twitter.com/Deosil_25 https://www.instagram.com/deosil25
#minecraft #createmod #create #letsplay #episode22 #survival
