Insane Mansion Transformation! 🤯 Step-by-Step Guide | Minecraft PT 6

Hey guys i’m back with part six for this tutorial on how to build this mansion here at this one we’re gonna be doing the interior layout for the second floor of the house and for the attic i gathered up all the blocks we’re gonna be using so i have some spruce wood

Planks pillar quartz blocks smooth quartz blocks chiseled quartz blocks quartz bricks smooth quartz stairs a smooth quartz slabs then some light gray concrete gray concrete white concrete brown concrete blue concrete light blue concrete and cyan concrete then some sea lanterns spruce with stairs iron trap doors stone buttons and anvils

Let’s continue bringing up the walls here for the entrance of the house so i have is the light gray concrete i’ll just go here towards the left side of the top of the staircase and i’m just gonna be one space after it i’m gonna place a strip of light gray

Concrete right here so that’s just one more let’s go ahead and do another two on top of that so just all the way up towards the front and if there were just one space after the top of the staircase let’s look at the front wall we’ll fill in this space right here

That will go towards the left and fill in these two spaces so just an additional three again and now we’ll go ahead and bring this back up until we’re lined up as that side so i’ll just start right here and i’ll just place another three And then let’s go to this small space right here we’re just gonna add an extra three so it’s here at the top of the staircase at that same layer and then right here on this corner we’ll place another two so this is gonna be a pillar going up right here in the middle

Now on top of all that light gray concrete let’s place a strip of chiseled quartz box Make sure to get this pillar here at the middle as well and now you can switch to the gray concrete and i’m gonna place six more layers on top of the chiseled quartz So it’s looking like this let’s look at the front wall right above this big window and we’ll just pretty much follow along these full blocks so it adds this little arch to it and they will continue bringing up an additional two layers on top of that

So now this entire front wall is all filled in we have these sides all brought up we have the pillar let’s go ahead and add the anvils so i’ll grab those i’ll just swap out the spruce wood planks for now i’m gonna place three right here on top of this light gray concrete

And another three here right next to the staircase so now let’s mark out well actually let’s start placing the floors and then we’ll mark out where the doorways are going to be we have one on this side and that side so be sure to grab these spruce wood

Planks again and i’m going to just fill in the space here at the top of the staircase so i’m gonna line up where this wall is and just place a strip going towards the back i’ll do the same on this side and now all the rest of the space here

In the middle we’ll continue filling in So it’s all filled in like this now let’s mark out where these doorways are going to be so you can switch to the pillar quartz block i’m just going to be right up against the wall here these doorways are going to be double thick so we’ll start on this side

We’ll just bring it up by four we’re gonna skip over two spaces bring it up by another four we’ll have two sideways going along the top and then we’ll go on this side and we’ll add the extra layer so you can fill in at the corner half the two going across

Have the three going straight up and down underneath that go back on this side fix the corner And you can then grab the stone button i’ll just swap out the spruce wood planks for now and we’ll just cover up those corners and then we’ll go on this side and we’re going to do the same exact thing So i have both of those doorways marked out let’s switch back to the gray concrete we’ll continue filling in all the space right above the doorway And now let’s look at this back wall first we can switch to the smooth court stairs i’ve got to place three upside down right above the doorway and now let’s continue with the same wall pattern that we did over here on this side so you can switch to the light gray

Concrete we’re just at the left of this doorway we’re gonna fill in just two layers in height like that we have these two spaces which will also fill in we have this side as well and then to the right of this doorway now on top of that we’ll have the strip

Of the chiseled quartz blocks and then it’ll be six layers of the gray concrete you just want to go right above this doorway as well So with this back wall you can still see we have some of the stone brick here don’t worry about that if this layer is actually where our ceilings are going to be filled in at so that’ll all be covered up but this is what the top of the

Staircase is looking like we just have both doorways all of this filled in with the spruce wood planks and all of the walls filled in so i’ll head on over i’ll go to this left side and we’ll start filling in all this space so i grabbed all of the blocks we’re

Going to be using for this space so just continue with these spruce wood planks notice that we have light gray concrete brown concrete white concrete anything chiseled quartz blocks quartz bricks pillar quartz blocks and stone buttons so you can switch back to the spruce wood planks so we’re just gonna start by

Filling in all the floors here for this bedroom so i’m going to look at this second window over here on this wall and i just want to make sure to place four blocks after the edge of the glass so we’ll be lined up here where this

Great concrete is we’ll go all the way down at the bottom and we’ll bring over towards the left four of these spruce wood planks now we’ll bring a strip straight across into that wall and now you can see all of the space on this side will continue filling in with the spruce wood

Planks so all this space is going to be a bedroom and then the rest of the space here we’re going to fill in with quartz bricks this will be a bathroom but you can see we do have this opening here so if you want to use this space as well then you could

I mentioned before you could just maybe have some regular sized minecraft doors here because you can see how this space just really isn’t big enough for the scale of this build so i’m now just going to start right here bring this straight across with the quartz bricks and fill in all these floors

So bathroom floors are filled in and the bedroom floors are filled in now let’s bring up the walls here for the bedroom switch back to the light gray concrete and i’ll just look here at this doorway first i’ll go towards the left and i’ll bring this strip straight across into that side

So just one layer of light gray concrete then we’ll bring this all the way over until we’re lined up where the spruce wood planks end so just right there we’ll add an extra block going out like that we’re gonna skip over three spaces this will be the bathroom doorway so we’ll

Start on the fourth space and we’ll just bring this straight across and then bring this in back towards the other side of the doorway so now you can see all this space right here is the bedroom on top of that we’ll place a layer of chiseled quartz blocks

And then on top of that chiseled quartz we’re going to place five layers of brown concrete so the bedroom walls are filled in now let’s mark out where the bathroom door is going to be it’s also going to be doubled up so you can switch to the pillar quartz block

We’ll just bring up four on each side have the sideways one go on the bathroom side we’ll add the extra corner sideways again three at the bottom go back onto the bedroom side fix the corner add the stone buttons and then on top of the doorway we’ll add

The additional three layers of the brown concrete let’s go on the bathroom side and we’ll fill in all the walls here so you can switch to the white concrete and we’re just going to go all along the outer edge where the quartz bricks are just place a single layer of the white concrete On top of that i’m going to add a layer of chiseled quartz and then another five layers of white concrete Now i have this bedroom all done this bathroom all done we still have to do all the ceilings but i’m gonna leave that after we do the layout for this side so we’ll get on to this next and by the way here at the door where the balcony is you can see we

Still have the strip of the smooth quartz blocks so i’m actually just going to replace this with the quartz bricks just like that so we don’t have that random strip of the quartz blocks there now let’s head on into here i’m gonna switch to the spruce wood planks i’m just gonna fill

In all of the space here for the floors so i’ll just start on this side we’ll just bring this strip going all the way towards the back well actually i guess that’s like the front wall and that will bring this all the way over into

That wall if i bring this all the way towards the back and wrap it around back to where we started so now you can see all of this space here we’re just gonna fill in So all of this is now filled in so now let’s bring up all the walls i’m going to start with the white concrete and just all along the outer edge where we just placed all the spruce wood planks we’re going to just place a layer of white concrete and then after this

We’re going to place a layer of chiseled quartz blocks and then it’ll be five layers of light gray concrete after that So all of this is now filled in so here on this side we’re gonna have the staircase going up to the attic just right here is that we’re gonna have a wall going across here to divide to like separate the little hallway here and the bedroom that we’re gonna have here

So let’s mark out where this staircase is gonna be next now be sure to grab the spruce wood stairs the white concrete the chiseled quartz blocks the light gray concrete is the anvils the pillar quartz blocks and the stone button we’ll start with the spruce wood stairs we’re

Gonna be right next to this doorway so just right here on this space we’re gonna place two going straight out like that and then we’re gonna curve the third one now we’re gonna continue going up we’re just gonna have two going straight across and it’s going to be a total of

Eight layers in height so this is going to be the first layer so then this is two three four five six seven and then the eighth one we’ll go ahead and just place that place another two and we’ll then delete that so just a total of eight layers in

Height the first layer has this third stair that curves around the edge now let’s start filling in the wall next to the staircase so you can switch to the white concrete we’ll be right behind this curved stair so starting here we’ll just push this back by three

On top of this we’ll have a layer of chisel quartz blocks and now on top of that we’ll switch to the light gray concrete and we’re just going to fill in these two spaces leaving this one empty and then on top of this block all the

Way at the back we’ll just fill in that space and now on top of just these two spaces we’ll add some anvils so that’ll be part of the rallying for the staircase and now let’s start marking out where this wall is gonna be going straight across here so you can switch back to

The white concrete we’re gonna be lined up here all the way at the back of this space that we just placed and we’ll just bring this out by two and then we’ll skip over four and fill in the other two on this side now we’ll have a layer of the chiseled quartz blocks

And they will have five layers of light gray concrete on top of this we’ll go back on this side and we’ll fill in this space here as well Let’s mark out the doorway so you can switch back to the pillar quartz block we’ll bring this up by four on each side we’ll have two sideways going across at the top and then we’ll place some temporary blocks because this doorway is only going to be one block thick we’ll go on

This side we’ll fix these corners we’ll add the stone buttons we’ll delete these add the stone buttons on this side as well and now back to the light gray concrete we’ll fill in the remaining space on top of this doorway so now you can see all the space here

Will be this bedroom we have this little hallway here and then access to this staircase let’s go behind the staircase and we got a little bit more of the wall to fill in here to kind of cover it up so now just back to the white concrete

We’ll go right here at the edge of this wall we’ll bring this out by two and then we’ll bring it in by two into that side we’ll have a layer of the chiseled quartz blocks on top of this anything will have will actually just kind of bring up the

Light gray concrete all the way up until underneath this stair so we’ll fill in these three spaces like that and that will bring this all the way up to the top and that will also fill in the remaining two spaces here and then eventually this wood here is

Going to be covered up by the crown molding and then this wood is going to be covered up by the ceiling we have this space right here which you can see will also fill in with light gray concrete so let’s go ahead and actually fill in

The ceiling real quick so i’m going to switch to the white concrete so here at the top layer of the walls we’ll just fill all of this in so now you can see we just have to cover up the rest of the wood here with the crown molding but this is what the

Bedroom is looking like so far let’s head back out and we have this staircase all marked out now so we just have to do the ceilings here we have a little opening where the staircase is so now i’ll head on back over to this side now fill in these ceilings

So for the bathroom we’re gonna fill this in at the top with light gray concrete anything in this bedroom will be white concrete and now here at the entrance of the house will also be white concrete so now let’s start adding all the crown molding and extra features and all these

Ceilings as well as all the lighting and so we’ll head on up to the attic after we do this final space here so i’ll head on into this bedroom first i’m going to switch to these smooth court stairs i’m just going to place this all along the outer edge just like we’ve done

Everywhere else throughout the house so now it’s covered up right there and this is what it’s looking like now let’s do this crown molding for all the other spaces so we have the entrance of the house we have this bedroom and this bathroom so i’ll head on into here first

Just wrap it all the way around do the same for the bedroom And now let’s head on into the entrance i’m going to add a couple sea lanterns in here real quick and this is going to be a little bit different so we’ll do this space over here first we still have the smooth court stairs which will be wrapped around

But we want to make sure to stop this side until we’re right next to this pillar that goes up so bring it up or we’ll bring this over to right here so that will just bring this straight across so we’re just right up against that pillar and then we’ll wrap this back around

And back to where we started so we have this section and now we’ll go on this side and we’ll do the same thing so we’ll go straight across right here so we’re just leaving the single space and that will just continue with the stairs going all the way around

And now let’s add a few little like a couple arches that we have so you can switch to the smooth chord stairs i’ll just swap out the stone button i’m gonna have one on each side so it adds a little feature like this and then you can switch to the smooth

Chord slab and fill this in so that would just have two little arches like that and i’ll leave it at that here for the entrance for now we still have to add all the extra detail but i’m going to head back into this bedroom and we’ll start by doing the detailing

Of this room next so for all the detail now i’m going to be using the smooth quartz box the stairs and the slabs and then some sea lanterns so i’ll start with the smooth quartz blocks and i’m going to look right here down the center of this wall i’m going to delete this

Stair i’ll flip around and delete this stair as well it will bring these full blocks straight across for the beam and then underneath on each end we’ll have a smooth quartz slab and then i’m gonna go right here where this piece kind of just juts out

And we’ll be sure to actually fill this space in with a sea lantern for the light source we’ll do the same over here we’re just going to bring a strip of the smooth quartz slabs across and that will go on this side right here and we’ll do the same thing so i’ll add

Another sea lantern in that space and over here and they just fill this in with the slabs so this is all i’m gonna do here for this bedroom now we’ll head on out we’ll go to the entrance of the house we’re gonna have another beam going straight across right down the middle

I’m gonna add a couple sea lanterns in here kind of just out of the way so that we can start placing all that so we have the full blocks of the smooth course we’ll delete that stair and this one will fill this in we’ll do the same on this other side

As that will have a smooth quartz slab on each end and then we’re going to go in the other direction and have all the slabs so i’m going to add a sealant here for an extra light source and right here and we’ll do the same uh this part

Because then just delete this one we’ll cover all this up with the slabs so that’s what this space is looking like and we’re going to be doing the same thing over here so just add a couple sea lanterns and then cover it all up with the slabs

And i’m going to leave the entrance of the house like this for now and now we’ll head on into this bedroom next so in here we’re definitely going to need a light source so i’m just going to add a sea lantern right around here for now

And then we’re going to have a beam going straight down the middle it’s going to be a little bit different so i’ll just replace the stair on each side with a full block underneath that i’ll have a smooth cord slab and that will have another stair just right up against that full block

Anything slabs going straight across but we’ll be sure to add a light source so maybe just one here and here and that will cover all this up with the slabs we’ll then just delete that and now we’ll go in the other direction and i’ll have another sea lantern right

Here so one space there two spaces there we’ll do the same on this side and then over here as well as i will have some slabs going in that direction And i’m gonna leave the bedroom like this and now for the bathroom we’re just going to maybe have a sea lantern here and here and we’ll just add some smooth cord slabs so i like to leave it pretty simple for the bathrooms could have another sea lantern here in the middle

With another set of slabs but i’m just going to leave it like this now we’ll head on out we have the entire second floor all filled in we just have to do this space here so we’ll look here right above where these anvils are where this part of the

Wall is you can switch to the smooth court stairs so you can see we have this first block of the light gray concrete after the anvil we’re gonna be lined up with this second block and we’re going to just bring out three upside down smooth cord stairs like this

And that will curve into that wall by another two so just a little shape like this around the staircase so enough space to go up and down and now on top of this we’ll place a layer of the light gray concrete so be sure to grab that

And now i have the same layer as the top of these walls we’ll fill it all in with white concrete And then we’re going to go all along the outer edge with upside down smooth cord stairs for the crown molding we’re going to be right up against these stairs here on the same layer so just wrap right around that if they just work this along the outer edge

Now let’s add some smooth quartz slabs but first let’s add maybe a sea lantern right here i think just one there will be fine so i have a strip of the slabs going in this direction another two extra right there and then we’ll go in this direction and have another set of slabs

So this is what it’s looking like and now that is it for the entire second floor we’ll head on up to the attic we’ll fill in all this space up here and then we’ll leave it at that for this video so i gathered up all the blocks we’re

Gonna be using for all this space first so be sure to grab the spruce wood planks the light gray concrete the chiseled quartz blocks the white concrete the pillar quartz blocks the stone buttons these spruce wood stairs smooth quartz stairs and smooth quartz blocks so let’s start by filling in the walls

Here around the edge of the staircase so make sure you have the light gray concrete and will just be here at the top of it here at this left side first which just brings this strip of light gray concrete to this corner here so we’re just right

On top of where this opening is they could go ahead and bring this in to this side and then bring it back to the other side of the staircase and now on top of this we’ll have one more layer of the light gray and they will have a layer of the

Chiseled quartz blocks and that will have five layers of white concrete So it just brought up all those walls here where the staircase is now you can switch to the spruce wood planks and we’ll start filling in all the space here for the floors where this little hallway is going to be and this bedroom over here so we’ll go right next to the staircase

Lined up where this wall is i’ll just bring the strip of the spruce wood planks over until you’re kind of like right in front of these full blocks here where the quartz is so just bring it over you can see how the corner of this plank is kind of

Touching the corner of that full block and that will just bring this straight across into that wall and then we’re gonna go ahead and bring it over until we’re just one block away from the edge of this wall here so we’re gonna be right here on this space we’ll

Bring a strip straight across and now you can see all this space right here will fill in with the spruce wood planks So all of this is now filled in for this bedroom and this little hallway let’s continue on and fill in the floors here for the bathroom that we’re gonna have so here for the bathroom we’re just gonna fill all this space in with the chiseled quartz blocks so start right

Here at the edge of the spruce wood planks and i’ll bring it over until we meet up right next to these full blocks so you can see how this corner is now touching that corner just like how we did it over there for those floors and that will bring this all the way

Over into that wall that’s still remaining over there and now you can see all this space will continue filling in and now let’s mark out where the walls for the bathroom and for the bedroom are going to be so we’re going to have the same wall pattern that we did here for

The staircase area so that’ll be for both the bedroom and a bathroom so you can switch to the light gray concrete which is have the single layer going all the way around the outer edge so i’ll start here next to where we left off this wall just bring this all the way over

Just right next to where these full blocks are so just bring this straight across in front of them all the way to that wall we’ll bring this all the way towards the back until we’re right in front of those full blocks So just right there we’ll bring this in to that gray concrete that we can still see there and then this will just be covered up so it’s going to connect right back into that wall And now let’s mark out where the bathroom door is gonna be so it’s gonna be right here at the edge of this wall right up against it so you can switch to the pillar quartz block we’ll bring this up by four we’ll skip over one bring it up by another four so

This doorway is only going to be one block thick so add the sideways block we’ll add a couple temporary blocks fix these corners whoops hold up add the stone button what the heck happened here okay so it has the stone buttons there we go that all looks good and then

We’re going to continue filling it with the rest of the wall here to divide the bedroom and the bathroom so we have the extra layer of the gray concrete or light gray concrete and then let’s uh let’s see we’re gonna have it’s a doorway leaning into the bedroom here

But we want to make sure to kind of bring it in a little bit so i want to make sure this hallway is four blocks wide so we’re gonna go right here at the edge of this wall we’ll bring out another two blocks of the light gray concrete and it will

Bring it over by one and is that we’ll mark out where the doorway is gonna be here so it’s going to be four spaces we’re going to fill in the last space here at the right so then we’ll mark out this doorway just bring it up by four on each side

Two sideways at the top and once again this is just going to be one block thick so we’ll fix these corners and add the stone well actually we can’t have a stone button on this side because it’ll be covered up with the little bit of the ceiling we’re

Going to have but we’ll be able to do it over here on this side so we won’t be able to do it here either so that’s it for that doorway and then we are going to have a little staircase going up here it’s gonna just

Kind of go up over the ceiling part here that’s a little bit higher than the rest of the space so let’s not fill this in quite just yet but i’ll start right here and we’ll fill in all of these walls we’ll bring them all up to where they should be so make

Sure you have the chiseled quartz block we’ll just start at this corner make sure to skip right over all the windows and we’ll just add this right on top of the light gray concrete So there we go just went all the way around here for the bathroom and the bedroom oh hold up we got this little corner here as well and now you can switch to the white concrete i’ll just start here at this corner and i’ll bring this all the way

Up to the same height as the other white concrete and then we’ll fill in all the remaining space that we still can above this doorway so we’re just now following right along the roof we have this single space right here and then we’ll go on this side we’ll

Bring this all the way up by another five layers so we’ll follow along the roof on this side so that’s three four and five and now we’ll just continue bringing this up to that same height Anything you can work your way back into this corner And then we have the wall right here to divide the rooms so we’ll fill all this in as well and now let’s go into the bathroom we have this final space right here So this is looking good that’s the bathroom this is the bedroom we still just have to add the ceiling now so first let’s actually go here at the top layer of the walls here for this bedroom you could switch to the light gray concrete and i’ll just

Fill all of this in with the start of the ceiling And now you can still see all the roof here so that’s going to be covered up with some smooth cord stairs so we’ll switch to that and we’ll go here on this first layer these are just gonna be placed upside down you can skip right over the opening

Where the window is go up in the next layer this is just gonna be brought straight across to the other side and then for all this space here right above the window it’s going to be filled in with smooth quartz blocks and there you can see we have two more

Layers of the stairs going straight across So now all of that is filled in and i’m gonna add a little bit of a crown molding here so i’m just gonna connect right into the top layer of these stairs and wrap this all the way around this is something that i don’t think i’ve ever done in another build

But i felt like it was a nice little feature to actually have crown molding in the attic and then we could also add some extra detail at the ceiling so i’m just going to grab the smooth quartz slab i’ll just swap out that stone button then grab the

Sealant turn and i’ll just swap out the spruce wood stair for now and i’ll add just a sea lantern right around there should be good we’ll cover this up with a set of smooth cord slabs and then that’s really about it we’ll then add a little bit of extra light above some of

The stairs where the crown molding is so maybe another sea lantern there maybe another one over here and one more here that will cover that back up with the stairs so i think that’ll be good now let’s head on into the bathroom so once again we’re just going to have

Some upside down smooth quartz stairs to cover this up and we’re going to probably leave two spaces here for the ceiling so it’s going to be a little bit lower than the bedroom or should we go ahead and just have the one you know what let’s just

Have one strip all the way at the top of the light gray concrete so just fill in all of this here and now you can work your way down and fill the rest of this in with a smooth cord slabs so i have the first layer just brought straight across

We have the second layer also just brought straight across within the third layer we have to skip over the windows as i fill in the opening above the windows with the full blocks and now i’m just going to add a couple sea lanterns up here at the ceiling

You could if you want to just add a smooth cord slab to cover that up and you know what that’s what i’m gonna do i’m just gonna leave it like that i was gonna cover it up with some iron trap doors which is what i would usually

Do but i think the slabs looks good and you know what how about we just add one more down the middle is that good three there three there yep okay it’s all even so this bathroom is now done we have this bedroom done so we’ll head back on into this hallway

And we’ll focus on this space next so let’s mark out where the opening here is going to be just a little staircase going up little hallway and there’s just a doorway here so i’m going to be right here at the edge of this wall so you can see we’re

Lined up where the top stair is here at the staircase so we’re gonna be right next to that so you could delete this block of the light gray concrete go ahead and delete another three next to that so we just have a space of four you can switch to the pillar quartz

Block i’m gonna bring up six so we’ll do the same on this side so i could only bring that one up to five now on this sixth space will bring two going across so it almost seems as if the corner block here is in the roof so it’s just like that

And now this doorway is gonna be doubled up but first let’s grab these spruce wood stairs i’ll just swap out the smooth court stairs for now and i’m going to have a little step up here so right in between this doorway we’ll have two stairs and then another two on top of that

And now let’s go to the left of the doorway we’ll add the two spaces of the chiseled quartz blocks and then we have the rest of this white concrete for those three spaces right there in the corner and now let’s fill in this space with these smooth quartz stairs so let’s

Switch back to those again and i’m thinking we’re gonna have these ceilings in here one block higher than where this white concrete is so it’s going to be one block higher than the ceilings here for this bedroom space so let’s actually uh fill all that in now

So it’s going to be light gray concrete in here you can see just one block higher than these walls we’ll fill in these two spaces right above the staircase Is that we have these two spaces here and uh this right here is going to be some white concrete above the door so we’ll fill that in and now let’s cover up the roof here with these smooth court stairs so we’ll start down at the bottom

We have the space right here next to the window go up on the next layer bring this straight across fill in the space right above the window with the full blocks now continue working your way up we have three more layers until we meet up with that light gray concrete Just like that and now let’s add a little bit of light in here so i’ll just add a couple sea lanterns on that side maybe a couple more here and i was going to cover these up with some iron trap doors but i think i’ll just do the smooth quartz slabs since

We’ve done that everywhere else so far i mean we have this whole hallway done so yeah we’ll look at this doorway now like i said it’s going to be doubled up so we’ll go on at this side switch back to the pillar course block we’ll fill in that corner

We’ll have the two sideways and then it looks like we’re just going to have one two three and four going down right there we’ll do the same other side and now we’ll go back over here we’ll fix this corner we’ll add the stone button on each side And there we go so hallway all done staircase area done we have this doorway this little step up so now let’s mark out where this hallway is going to be we’re going to have a bedroom over here and then the hallway kind of goes back down

We have a bedroom here and a bathroom so let’s look at all this space here next we’ll continue with the spruce wood planks so we’ll be right behind these spruce wood stairs it will just bring a strip out by seven We’ll line up here where this stair is do the same thing and now we’ll go towards the left we’ll bring it over by another two so we’re lined up here where this pillar is for the doorway and then we’ll go one block further after that and then

To the right we’ll bring it over by another two so now it is a total of six spaces wide and seven spaces in length now you can switch to the white concrete i’ll go towards the right side right next to this doorway and i’ll bring a strip straight across

Until we meet up here at the edge of these planks i’ll go towards the left i’ll bring this out by two and that we’re gonna have a doorway leading into this bedroom so you can switch to the pillar quartz block i’ll bring it up by four skip over two have another four

Two going across at the top and this doorway is gonna be doubled up so we’ll go on this side we’ll add the extra layer And then next to this doorway we’ll have another two more spaces of white concrete on top of that we’ll have a layer of the chiseled quartz blocks and then back over here on this side we’ll continue bringing this up until we’re at the same height as the white

Concrete there so just another three layers so we’re just one block higher than these doorways so we have this hallway pretty much marked out we still have to cover all this up with the stairs which i’ll do now so you can switch back to the well actually we’re gonna have a doorway

The doorway is gonna be right here so let’s go ahead and mark that out first so now let’s mark out the little staircase that we have here and this doorway at the other side of this hallway so make sure you have these spruce wood stairs again we’re gonna be

Right up against these spruce wood planks we’ll just place two so now this is just lined up with that other staircase and then we’ll go right below that with another layer you can switch to the pillar quartz block we’ll be right next to these stairs so i’ll start here on the right

And i’ll bring this up by four i’ll go on this side i’ll bring it up by i think it’s five yeah and that will have two sideways across the top and as i continue on this side we’re going to add the extra layer so fill this corner in

Two sideways again we’re gonna bring this right side down by another five so at the same layer as the bottom stair we’ll go on this side and also bring it down by five we’ll cover up this corner with a stone button we’ll go on this side we’ll fix

The corner cover that up as well so that is the doorway we have this staircase going down so now let’s head back into here we’ll fill in all of this with the smooth court stairs so grab those again so we’re going to have three layers so this would be the first layer

This will be the second and then we have the third and then this strip up here we’ll fill it in with light gray concrete and then real quick let’s fill this in with the extra white concrete so just these two spaces There we go and then let’s add a couple sea lanterns we’ll cover it up with just the smooth quartz slabs There we go and now let’s head on into this bedroom so you can switch to the gray concrete we’re gonna be filling in all the floors with this so i’ll flip around and i’m gonna line up here at this side of the doorway so right on top of where you already see

This gray concrete here for the walls where the entrance of the house are we’ll bring a strip of gray concrete straight across all the way to the back so we’re gonna leave just these two spaces here so now we’ll just bring this straight across into that other wall

So on top of this is where we’re going to be placing the walls and that will bring this over to the other side and now you can see all the space here we’re going to fill in So on this back side you should still be able to place two blocks here until you meet up with the stair for the roof so just right on top of that we still have the two spaces so the walls in here are going to be all

The blue concrete blocks so be sure to just grab all those so i’m going to start with just a pattern with a light blue and the cyan and then i’ll go back and add a few strips of the blue so i’ll start at the left side of this doorway and we want to

Make sure to skip over every corner so these four corners so i’ll start with maybe the light blue concrete just place a block there we’ll skip over that corner and just jump right on into the cyan back to the light blue and the cyan just back and forth

Is that once again once you meet up with this corner you can just skip right over that switch straight back to the cyan if you have light blue there and anything just back and forth again skip over that corner continue on skip over this one and there we go

Now we’ll bring this all the way up just to the same height as the doorway for now and then at the back wall we’ll just bring that up until we meet up with the stairs for the roof So it’s brought up like that for now we’ll then continue working our way up and we’ll go across the top of the doorway just one extra layer and now you can just continue the pattern right above the doorway it should all work out good So there we go we have all that filled in and now one block higher than that you could switch to the white concrete and fill in at the ceilings or should we do two blocks higher are we able to because then we’d be able to have a

Little bit of crown molding in here and it won’t be so close to the top of the doorway so let’s maybe just bring these walls up one more layer higher so we’re just two blocks higher like two blocks above the top of that doorway And now one block higher than the top of these walls will then fill in the ceiling with the white concrete so just right here And i will cover all this up with the smooth court stairs and then continue on with this top layer and just wrap this around for the crown molding and then we’ll have maybe just a set of slabs right down the middle so just have a sealant right

There and we’ll then just cover that up so uh that’s gonna be it here for this bedroom now it’s all filled in well head on out we have this hallway all done so now we just have the final space here in this bedroom and bathroom so now i

Have all the rest of the blocks we’re going to continue using for this video for all this space so make sure you have the spruce wood planks the light gray concrete the gray concrete and then the white and the cyan and then we have the chiseled quartz blocks the smooth cord

Stairs the full blocks and the slabs and then we have the pillars and the quartz bricks is that the sea lantern and the stone button so left side of the doorway i’ll just go right down here at the bottom and i’ll bring it over by six and then i’ll bring this straight across

Into that side let’s go towards the right of the doorway i’ll bring this over by three once again bring this all the way towards the other side and now you can just fill in all this space here and now go along the outer edge and we’re going to start with the light

Gray concrete for the walls so real quick let’s just place this strip i’m just going to place a block here and then this is where i’m going to start the bathroom door so we’ll skip over these three spaces and we’ll just continue on this fourth space

And just wrap this all the way around and now on top of that i’m going to have a layer of the chiseled quartz and then i’ll switch to the gray concrete and i’m just gonna bring this up by six layers and over on this side we’ll have to kind

Of work our way along the roof so i’ll start over here next to this doorway you can see we can only just fill in those three spaces there and then over on this side we’ll just work our way up so that’s two three four five and this will be six

So just all the way up like that so now we’ll just continue wrapping that all the way around so all of this is now filled in you can see we have a little bit of this quartz here but that’s going to be covered up what actually is our ceiling going to be

Here yeah our ceiling is going to be here on this layer so that’ll be covered up by our ceiling uh let’s mark out where this bathroom door is going to be so you can switch back to the pillar quartz block and we’re not going to be using these spruce wood planks anymore

So we’ll just move that out of the way let’s also grab the quartz bricks and i’ll just swap out that light gray concrete and that will also grab the stone button and i’ll swap out the gray concrete so we’ll start with the quartz bricks and i’ll just fill in all these floors

And then we’ll mark out that door so i’ll bring this over by one two three four five six and seven so just to the corner of that quartz again bring this all the way across to this wall and i can see all the space here will be filled in with the floors And now let’s mark out the doorway so you can switch to the pillar quartz block and i’ll bring this up by four on each side sideways block and then we’re gonna double it up so we’ll go on the bathroom side and add the extra layer And now let’s continue above the doorway with the gray concrete And now in the bathroom for these walls we’re going to have two layers of the pillar quartz blocks facing straight up and down and then after that the rest of it will be the cyan concrete so you can switch to the pillar quartz block i’ll

Just go at the left side of the doorway i’ll fill in these two spaces then i’ll bring this over to that side Make sure just to have the one space in front of that window and if they continue on with the two and we’ll just wrap this all the way around and then after that we’ll continue with the cyan concrete and we’ll just bring this all the way up

Along this roof on each side and it’ll fill all of this in as well so this is what the bathroom’s looking like and then here is the bedroom again so let me just continue on in here we’ll grab the top layer of these walls we’ll fill it in with the white concrete And then we’ll fill all of this in with the smooth court stairs We have the full blocks above the windows they then back to the stairs and then ah this layer i’m going to just wrap this around for the crown molding and then let’s add a little bit of light so you could grab the sea lanterns i’ll just swap out that white concrete uh

Maybe just one right here and here and how about one in the middle i have a set of the smooth cord slabs going in this direction and that will have a little bit more in the other direction like this and then we’ll head on into this bathroom and we’ll leave we’ll fill in

This strip all the way here at the top with the white concrete we’ll fill in a few spaces with the sea lanterns cover that up with the smooth quartz slab make that cover up the roof with all the stairs again and that’ll be it here for this bathroom

And now i think we are done that is the entire interior layout so yeah now we just have to do all of the furnishings for this house all right guys i’m gonna leave it at that here for part six for this tutorial on how to build this

Mansion if it helped you be sure to please leave a like subscribe for more and i’ll see you guys in part seven