Insane Minecraft Build: WIND & STEAM POWER PLANT

Gamers our power situation is quite literally dog we’re still using water wheels and they’re just scouted everywhere next to my base under my base under our Factory under another Factory so it’s time to upgrade to wind and steam power with some new massive wind turbines and steam engines and connect

It all together in a new power plant building and I’m kind of acting like it was my idea um I’ve had heaps of comments requesting this so credit where credit is due thank you for the ideas as always to kick things off we of course need to figure out a location ideally it

Would be nice if it was somewhere kind of close by so uh let’s have a little quick look around okay I think I’ve settled on a pretty good spot and that is going to be right here obviously yeah there’s a lot of water here at the

Moment but uh yeah we’re going to have to of course just go ahead and fill this entire thing up with some dirt and I feel like this is going to be a pretty good location it’s also nice and close to uh everything so I’m going to head

Back to base grab a whole bunch of dirt to fill in all of that water and yeah we’re probably just going to get that done as a real quick time lapse starting right now okay and there we go there’s our area completely flattened off and ready to

Build on I’ve also just gone ahead and grabbed a whole bunch of different blocks I’ve got even more in our little tool boxes well just a bunch more Stone now I do have a lot of stone and a lot of polished andesite because I do kind of want this building to be

Predominantly Stone I just uh you know I feel like it’s going to fit the vision I have for it and uh yeah so let’s just get started with the layout here and so that’s going to going to be the width of the interior of the build I think that’s

Going to be a decent size uh well hopefully and now let’s start figuring out like a nice little design for our side walls here so I reckon we should keep with the theme of two block wide pillars you know we pretty much used that everywhere else and I’m just going

To keep extending this down as far as I uh kind of want to go I guess okay so I think that’s a good length for the building there and I just thought instead of actually raising these pillars up all the way like how we normally would for each building what if

We actually have these as kind of like an outer layer and then we have the next layer be like the actual pillars so let’s grab out some scaffolding here and jump up the top and let’s just Place some stairs on top of all of these well

Actually let’s just do it with two to make sure this is actually going to look good first yeah something kind of like that I reckon that is going to look cool so I think what I’m going to do next real quick is just uh add these pillars

Onto every single side so yeah just uh give me a second all right so there’s the design so far I think that is actually looking really cool already this is going to look awesome dude next we need to figure out how we want to actually tackle the walls in between

These pillars of course so I think this is where our stone is going to come into play then let’s go ahead and grab out our copycat steps let’s maybe add some along the bottom and fill those with some andesite polished andesite whatever it’s called then maybe let’s add some

More here and what we can actually do is maybe replace these top stone blocks with some more polished and theight and that can be like our bottom wall there I think that’s looking cool and then for the walls on like this kind of top section we can actually just inser the

Walls once again with some more Stone like this we could even actually incorporate some windows in here here as well I think that would definitely look cool maybe something else that we could actually try is placing some polished Ander sight copycat panels in there so maybe let’s grab out some more copycat

Panels and just Place some like so and then just fill those in with some polished and theight and yeah that’s looking pretty cool honestly I think we could probably do with maybe a different block maybe like in this middle part and maybe on the bottom part maybe like some

Deep slate or something would actually kind of accentuate this look a little bit better so let’s go grab some deep slate real quick and uh I’ll just actually go ahead and add those in and we’ll uh you know we’ll be right back all right and there’s the final wall

Design I actually really love the way this turned out it looks absolutely awesome and like very like power planty I guess so yeah now I’m going to go ahead and actually just uh you know continue building this build probably just as a time lapse because honestly I

Have no idea how I’m going to do this okay before we start the time lapse I’ve actually gone ahead and changed my mind on what blocks I want to use for our build here right now it is just very uh Bland and stone and so I’ve actually

Decided I want to go ahead and change the inner blocks here for the walls from Stone to bricks and so instead of actually just going around and Mining a bunch of clay like I’ve done previously uh I’ve actually figured out that you know we can get clay if we actually wash

Sand we have a 25% chance to get a clay ball and to make sand we can actually get that from gravel if we put it through some crushing wheels so I’ve got a bunch of gravel we’re going to head into our little Factory Here head over

To our phallic uh little setup here and just place in a bunch of gravel and then once that’s processed we should yes and we actually do have a very small chance to get clay from this process here which is pretty nice and then so yeah once

We’ve got all of our sand processed we can head over to our washing station over here and we can place our sand in here and then once it’s washed we can uh yeah we’ll get a well a very small amount of clay and so I’m just going to

Get all of that done and we’ll resume with the time lapse of uh you know replacing those stone blocks to bricks and then we’ll continue building the rest of the factory as well so yeah let’s get started firstly I began replacing the stone with bricks however

I did leave a gap here which will be for our steam engines don’t worry I then headed over to the opposite side and began adding in the walls here too next it was onto the roof right now the overall build is looking quite short and

I wanted to add some extra height with a bunch of various designs so I added a big tower in the middle and some shorter ones on the sides then it was underfilling in the back wall with similar designs to the sides we already have built and then for the front I

Built a short little design kind of like a house I guess for the entrance of the power plant I then finished it all off with a door and some neat little extra details okay and there we go there’s our power plant building all completed except for these two walls once again H

Yeah just don’t worry about that for now and so the actual first Power thing that I want to work on is not going to be inside here it’s going to be on the outside actually and that’s going to be our massive wind turbines starting with the first one let’s just go with uh

Right here let’s make the base a nice sturdy 3×3 and uh of course I don’t have a crafting table I need bloody stairs mate God damn it okay I’m back with some stairs let’s raise this whole thing up an additional block like so and then I

Think for the actual main like kind of pillar of the wind turbine I guess is going to be this kind of shape and so I wanted to actually add our stairs in here just to make that transition between the base and uh the stem I guess

A little bit more nicer and so yeah I’m just going to go ahead and raise this up to uh a decent height okay and now from here we’re going to make the kind of like head of the actual windmill part so let’s add some stairs on the sides here

And then for the sides let’s just fill these in and then we’ll add some more stairs on top here yeah there we go that’s kind of like the uh I don’t know what it’s called but it’s like the head of the thing and we’re going to have the

Windmill kind of uh you know on this plane here now we’re going to grab one of our windmill bearings we’re going to place that bad boy right here next let’s grab out our wool and just make like a uh kind of a tea oh not t- shape but

Like a plus shape like this then I want to grab out my uh where are they these things windmill sails and these are going to make up kind of the bulk of our actual uh you know thing so I want to make these quite large yeah so I think

That’s a decent height so let’s add that onto each side and see how it’s looking so far all right so there it is so far uh it’s coming along nicely but these are definitely uh yeah they’re Way Too Thin they look like they’re going to

Break off in like a second of this thing actually being powered so let’s head back up there and kind of figure out what we need to do all right I reckon if we just add another like second layer here just to bulken it up a little bit

And let’s maybe make it go like halfway up like around there I guess and now with these all done it kind of looks like these aren’t really being supported so I think what could look nice is actually maybe adding a copycat step in there there so let’s grab our

Scaffolding and just Place one in there and let’s just Place some wool in that and yeah I think that’ll look nice kind of like a little like extra support for that area I guess and yeah dude that is looking a whole lot better it actually looks like a windmill now which is

Awesome now I did of course forget my superglue before and so yeah we actually need to super glue these sections together here in order for the windmill bearing to actually work so now let’s jump in here we’re going to remove this block and we should be able to now just

Uh you know power it on and hell yeah dude that should be generating some good power look at that 3500 stress units honestly I don’t know if that’s good or not but uh I mean I hope it is and now it is time to actually relay this power

Through our little pole here so I actually made sure to leave this hollow so that we can add a shaft and also some belts so let’s place a shaft here then we’re going to place the start of our belt right here and then we’re going to

Go ahead and jump back down we’re going to bring this belt all the way down here we’ll probably go underground too hopefully it’s going to reach yes it is and bang there’s our belt there’s our power being relayed from our massive windmill all the way up there and down

Through here and then we’re going to be able to actually route this into our Factory and Link it up with our steam engine eventually so now with this whole windmill done I’m going to go ahead and just make an additional two kind of in this area so yeah I’m just going to do

That as a very quick time lapse right Now okay Gamers there is our three windmills all finished and all added in I also just went ahead and linked all of the power up and we’ve got that coming in through here I mean I’ll just head inside so you can actually see it what

The hell where did my door go my door is just gone hello yeah there it is it’s coming in through here and we’ll be able to use this to power you know all of our stuff that we’re going to be needing for our steam engines first of which we’re

Going to be needing some of these fluid tanks because we need something to hold the water that we need to of course heat up for the steam power and so I plan on adding these on the sides of the buildings here so let’s go ahead and just remove uh you know these entire

Walls because they’re of course just going to be replaced with some fluid tanks instead okay there’s our walls removed let’s go ahead and start adding our tanks in so these are going to be in a 3X3 shape like this and then we’re just going to you know extend this up uh

Pretty high maybe like yeah one block past the actual top hip will probably look nice let’s jump back down to the other side and add in this one as well and I oh my god you’re kidding me I put it in the wrong spot okay and there’s our tanks added in

And while they do look nice I feel like they uh I don’t know they just don’t look secure enough so let’s go ahead and just Place some copycat panels around the sides here and now I don’t know if I want to leave them like that or if I

Want to have end theight inside of those I think I think I’ll leave them with the endite I think I like that more to be honest so yeah I’m going to add a strap there up the top and probably somewhere in the middle and uh yeah I’ll get that

Done and be right back okay and there we go there’s the final design for the water tanks all done now it’s time to head on inside and convert these tanks into some steam engines and to do that all we need to do is just grab our eight

Steam engine blocks that I went and pre-prepared before and all we have to do is just add one on top of uh you know one of these tanks here and that converts it into a boiler or a steam well yeah that’s a boiler these are the steam engines and so the configuration I

Want to go with is going to be four on each tank I don’t exactly know if this is the best layout or not but um we’re just going to stick with it and then we’re also going to go ahead and place some shafts on top of these to make

These into the ACT actual uh you know things that’ll turn as this gets uh you know steam in it and there we go there’s our steam engine set up next up we of course need a way to get water inside of these and for that we can head back over

To my chest full of uh nice little Trinkets and machinery and so yeah we’re going to have to go ahead and make an infinite water source somewhere I’m I’m guessing probably in here is going to be kind of the best spot so let’s Place some water like so how are we going to

Do this hey this might be kind of hard actually I didn’t leave a lot of gap between these so okay so yeah let’s actually go ahead and make our infinite water sources on uh each side here let’s grab out one of our fluid pipes we’re going to place that there and then we’re

Going to Arch it around and into the side of our boiler here we’re going to right click this to turn it the other way then of course we need to get this powered in order for it to work so let’s go ahead and actually grab our uh Power

From here from the windmills oh I don’t have any gearboxes oh my God okay give me a second I’m going to grab some gearboxes okay I’m back with a whole bunch of gearboxes what I actually want to do before we kind of bring this up to

The surface is is actually add a speed controller in front of this and uh yeah you guys have basically been raving on at me about not using these so we’re starting to finally use these now so basically these are going to eliminate the need for the whole gear ratio stuff

That we’ve been doing and it’s all just going to do it in this neat little box here so basically we can hold right click on the side of this and just set our freaking RPM that we want we can go as high as 256 look at jeez okay uh

That’s a bit too much I don’t know 64 might be good enough let’s just stay with that and so now with that done we can go ahead and take our power from this thing here we go across to here let’s grabb a gearbox a vertical gearbox specifically and let’s go up and then

We’re going to slap our Cog wheel onto that and that should be powering our pump and sucking water up if we right click the side of this here we can change it to a window one and see that our water is actually going in and we

Can see that our water little bar is now filling up if I actually remove all of these steam engines we’ll be able to see the water going in there we go look at that hell yeah it’s filling up okay before we get stuff powered let’s uh let’s go ahead and actually Place some

More of the things down that we’re going to be needing specifically under here we’re going to need the blaze burners that I need to go grab from the chest these bad boys so we’re going to have nine of these in total underneath each of our boilers there we go there’s our

Other nine added in ooh and we’re actually we’re already getting power from this as well just from the passive heat from these are making our boilers run although very slowly you might see 2,000 stress units that’s not very much for a steam engine of this size at least

So let’s relay this up we might just go up to here we’re going to bring our power over this way and that way whenever we need a power something we can kind of just Branch off of this if we need to and yeah there we go our steam engines are now getting powered

Which is pretty nice so next we’re going to go ahead and grab out some extra stuff specifically our mechanical arms here these are going to go right here I believe we’re going to be adding our mechanical arms in here and also here on this side of course and these are going

To be feeding lava buckets into these bad boys to get them running even faster than they already are and to get those lava buckets we’re of course going to need to set up a lava dripstone Farm which I plan on adding up here above the steam engines here okay so so let’s go

Ahead and grab out our dripstone and our cauldrons as well and so up here I actually want to make like sort of a catwalk thing that our cauldrons are going to be situated on let’s place our first one in here we’re going to extend this all the way down to the other side

And then we’re of course going to add another one on that side as well but first I actually want to link up a bit of a staircase up here it’s going to be hard to line it up definitely yeah okay just give me a minute okay there we go

There’s our staircase added in now we have this nice platform to work with let’s go ahead and add in all of our dripstone okay and I just realized this whole plat is for nothing because we need to place the cauldrons here and then pipes below them yeah I’m I’m a bit

Of an idiot but uh yeah the whole idea is basically we’re going to be adding our cauldrons under here we’re also going to place a whole bunch of lava source blocks on top of these to of course get these uh you know build up with lava I’m going to figure out all of

That in the platforms and the staircase uh yeah so just once again give me a second all right Gamers I’m back with a Canadian club with Coke in hand oh it’s good manate because it’s time to get started with the technical dog okay S I don’t know

What’s come out of me in the last last uh like half an hour but um yeah we’re just going to roll with it okay so yeah we’ve got the lava dripstone Farm set up of course we uh you know we don’t obviously have enough lava yet I’m going

To fill that up as we go as we get more lava in these like that one over there I don’t want to grab that oh got one here too fck yeah mate and so yeah basically we need to set up a system that’s going to harvest the lava put it into buckets

Give it to this and then give it back and then fill it up you know what I’m saying if you don’t understand uh you will in a second because we’re going to be setting all of this crap up right now actually we could probably set this up

Without even having any belts okay I just had an idea cuz I did kind of sketch this out in creative mode beforehand but we might actually be able to do this like way better basically we need to have our arm here grab lava buckets probably from this and then we

Needed to put the empty buckets back into something and I think we could do something like this actually if we have a funnel set up like this okay I might need to shift this back one okay I think this is actually going to work and this

Is yeah this is going to be kind of goated actually all right so we’re going to bring our pipes here from our lava down and we’re going to feed this into a spout this spout is going to fill up any empty buckets that we have on here uh we

Actually need to change that out for a pump and so basically our arm here is going to grab the lava bucket he going to put that lava into one of these bad boys and then we want it to put that empty bucket now back into here so if we

Set this brass filter to a bucket our arm should put it through here and then it should go onto here and then from here it’ll feed out and go onto our other Depot to be filled up by lava in theory uh yeah hopefully that’s going to

Work I guess we can actually just go ahead and test it all we need to do is power this uh pump here so let’s actually go back and grab our shafts and stuff and then we need to figure out how to get that powered okay we might

Actually have to move this all back one again really hope our arm is actually going to be able to reach this let’s just test it real quick if we grab our arm if we place our Depot down right click our arm to deposit items yes okay

It does reach there sweet thank God for that because yeah we’re going to need all of the room we can get here let’s slap our pump back on let’s grab our spout we’re going to place that there oh my God okay now to get power to

This we need to grab out our gearbox let’s put it there we’re going to change it into a vertical gearbox and we’re going to do that I’m sure there’s probably a better way of doing it but uh yeah so this is going to suck lava into this like so we just probably harvested

Some from the thing up above and now we can actually test if this is going to work if we grab our mechanical arm here we’re going to head down here we’re going to right click all of these Blaze burners to set them to deposit items we’re going to set this to also deposit

Items our empty buckets and then we’re going to set this to take items this is going to be our actual filled lava buckets then if we go ahead and place this bad boy right here um okay it’s a bit of a ghetto setup at the moment uh

Just don’t worry about it but it is working it’s powering everything it’s put the bucket back in and yes it is grabbing the lava bucket dude it’s working perfectly I just got goosebumps holy mother of got okay it’s not working perfectly it is grabbing empty buckets

Uh I don’t know if that’s going to really be that much of an issue actually a one way that we might be able to fix that is have a brass Depot here a brass funnel sorry and if we set that to be a filter of lav La bucket and then have

That go onto another Depo down here oh my God this is a little bit of a weird setup I’m sure there’s probably a better way of doing this and then we reset our little arm thing here to take from this instead I think this is going to be

Perfect Let’s uh let’s just relink everything in place it back down okay so deposit there and then pick up items from here bang let’s place our lava bucket back on there it’s going to power one of those put the bucket back in once that gets filled up it’s going to go

Down there and then this is going to cycle the whole freaking thing back again and it’s not going to pick it up from here even though it’s empty that yes dude that is perfect it might not be the best setup but I dude I’m happy with

It it works and so now if we compare our two boilers as you can see this one is yeah it’s spinning quite a bit faster than this one this one’s just passive Heat at the moment it’s outputting 248 if we look at this one 49,000 oh my God and that’s not even

With all of these powered I’m pretty sure yeah you can see the back ones there are powered but these four aren’t even powered yet because we obviously aren’t producing enough lava yet but yeah that’s the basic idea of the steam engines you know the basic setup pretty

Much done I of course need to now repeat this on the other side over here so I’m going to work on that right now I’m also going to hopefully get most of our lava dripstone Farms oh my God what am I doing uh all figured out and all filled

Up with lava here and so yeah just give me a second and I should be right back with all of that set up oh all right and there it is all set up and running at full capacity each of our steam engines here are running at a whole whopping

147,00 stress units look at that just for comparison one of our wind turbines is running at 3,500 so just one of those steam engines is literally like I don’t know the equivalent of like 30 of these or something dude that’s actually kind of crazy I I didn’t realize steam engines

Were actually that powerful dude that should be more than enough power to power literally like all of our factories plus I don’t even know how many more actually want to see how much power a water wheel outputs as well just for comparison’s sake oh my God

512 dude that is nuts yeah 512 per one water wheel and that takes up that much space that is insane dude I had so many comments of you guys telling me to use steam engines and uh yeah I’m I’m very glad we finally got around to doing it

Okay and so now the time has come to actually link these all together and I actually want to hook these up to our speed controller over here and then have all of that output into some power lines so let’s actually go outside first and figure out where we want our power lines

To start from all right I reckon probably from here might be a pretty good spot so let’s go ahead and start a power pole right here let’s just raise this up to a decent height and then we might just have like kind of little sides here that’ll hold the actual

Shafts to look like power Poes I guess and so these are going to come out of the building right here of course I’m one block too far away there we go and then they’ll kind of rest upon the actual power pole like this now I think

Another way to make it look a little bit more contained is just to have some copycat steps up here let’s of course fill those in with some polished Ander side as well and bang There we we go there’s our power pole design that is looking pretty cool hell yeah okay now

It’s time to actually get that hooked up to our windmills and our steam engines okay so obviously we have our windmill power here and then we also have our steam engine power here and this one is faster than this one honestly I have no idea how I’m going to do this okay first

Let’s get these connected up to the same line and we can’t really do it like that actually we can do it with these the encased chain drives like this bang and bang now they’re connected up we can take power off of one of these like so and there we go it’s all

Combined up okay and we’re back and I’ve also decided I’m going to move this down to the ground just to make it look a little nicer and bang There we go okay now what we should be able to go ahead and do place this okay uh maybe not um

Okay actually wait can we does that mean we can just do that yeah okay I think that’ll work so we actually didn’t need that whole freaking one oh my god dude they are such a pain in the ass to make as well oh my god well um that’s okay

We’re going to set this up to 100 128 I think that’s a decent speed let’s grab our large Cog wheel we’re going to place it in there and vertical gearbox okay now we should be able to just connect these up like so there we go and we can

Pretty this up by placing some andesite casings there so that our glass canes will actually connect back up and that’ll be you know a full wall but yeah there we go our power poles are now fully connected our power is outputting from our windmills and our steam

Turbines as well or steam engines I should probably call them and yeah there it is we now have power outputting from our brand new power plant and now all that’s left to do with this is uh just make a whole bunch more of these power poles around the place and then we can

Finally use it to connect everything up in our industrial city over there oh dude that’s actually metal our train ran over a creeper hell yeah and so yeah I’m just going to start building all of that uh right Now all right and there we go there’s our power lines all added in all the way over from our power station over to our main industrial city now I will definitely be using all of this power for our future buildings we’re going to be adding in and for pretty much every

Other building that we’re going to be you know adding uh elsewhere as well but yeah I’m really happy with the way this turned out it actually looks like like power lines which is pretty cool other than the fact that you know they’re like spinning uh but that’s okay it adds a

Little bit of extra visual interest to the area and uh yeah I think it turned out really awesome and now it’s time to get into your guys’ ideas from the previous episode and right off the bat you guys did not hesitate on ripping into my epic belt design honestly I

Think it’s a technical Marvel but uh yeah you guys definitely pointed out that I could have done this in a way better way instead of just having these being sorted here I could have just put them you know in front of each belt I honestly I don’t know why I didn’t think

Of that so let’s go ahead and uh just remove everything all right and now that we have we have a clean slate to work with let’s get on actually uh you know making this way better than it was before so first off we’re going to bring this belt

All the way down to the end here and now instead of having all of our brass tunnels right here we’re going to just simply put these in front of every single section that we want to you know kind of Branch the item off of and then

We just simply need to add belts in front of all of these to connect them up to our actual volts here we also have a load from the train here ready to go as well so we can test it out first we do need to get everything powered of course

Which should be pretty easy we just link all of these up together and another gearbox and bang everything is powered and that is quite literally it that’s the setup done I honestly I don’t know how I didn’t think of that in the beginning um now we can go ahead and

Just throw all of our wood on here and watch it get sorted nicely uh well hopefully yeah there we go it’s all going into the correct spots that is awesome all right the next idea that a couple of you guys commented on was for the nether portal and to go ahead and

Add some fluids inside of these tanks which I did actually want to do in that episode however I was uh definitely running out of time I was uh cutting it a bit close to the wire uh with releasing that episode in time so I’m glad we can actually come back to this

And uh improve it a little bit and so to get these filled with lava of course we can’t uh manually Place water buckets inside of these which is kind of annoying and plus it would take forever each bucket is 1,000 MB I don’t know

What MB is uh so that means you know 64 buckets for each of those plus those uh it’s going to take forever so instead we’re going to set up a little dripstone lava Farm let’s just go ahead and put this in the side of the mountain here

Like so then we’re place our dripstones in there and of course start adding our lava buckets in in oops that is not lava um rest in peace to that Lantern uh please don’t overflow oh my God okay there we go so now these cauldrons will be infinitely just filling up with lava

Constantly now let’s go ahead and grab some fluid pipes we’re going to connect all of those up and then we of course also need a pump to get this flowing so let’s go with right there we’re going to face that the right way and uh we do

Need to get that powered and so obviously we have our two water wheels here we can probably just uh drag power from one of these uh let’s oh dude that was perfect hell yeah now this is going to be very slow without a at least a

Little bit of gear ratioing so let’s get that sorted okay and that should be pretty quick now next let’s go ahead and grab the rest of our fluid pipes and we’re going to connect all of these up at the top here now I don’t know which style

I’m going to like more so let’s if we make these windowed like that then I think we’ll actually be able to get what I was wanting hell yeah yes dude that looks awesome I think I like that more than that one so yeah let’s go with that

Oh I so just got an achievement for doing nothing what the hell this shouldn’t have worked hidden achievement magma wheel what the hell is that oh God uh okay that’s um that’s what happened obviously a cauldron got filled with lava and I didn’t have a pipe to uh you

Know connect it to that that makes sense okay well we got a hidden achievement that I didn’t even mean to get which is pretty cool let’s do the same with all the pipes over on this side like so and then let’s connect that up and then

We’ll hook up this side as well and of course I have run out of godamn pipes oh my god um I’ll be back in a second okay and let’s just connect that up like so and hell yeah they should be filling up with lava relatively slowly actually but

Uh yeah I actually think that looks really cool with that addition there have we even actually okay we do have a little bit of lava in there that’s pretty cool another idea in one of those comments was just to add some like general pipe kind of decorations coming

Out the sides and stuff which I definitely think would look awesome so let’s just have some pipes kind of branching off the sides dude that looks so much better now with those little extra details that actually looks awesome dude thank you so much for the idea for that okay the next idea is

Actually my own idea and it’s just because I was running past and noticed that there is absolutely no grass on this because obviously it was once water and I put grass here so let’s uh crack out the bone Mill and start beautifying this whole landscape and hell yeah that is looking

So much better than just uh you know the previous flat grass the next idea couple you guys had was to actually make our little crane decoration here you know articulate and uh move around which which I think would definitely be awesome one of the comments did suggest

To use a sequenced gearshift which will actually allow us to kind of program the movements and uh you know make it move how we want it to and we’re going to need that because I don’t want it to you know clip through our new power pole here because that would definitely just

Go straight through it so I think having it move like from here and like around this way and then just kind of back and forth would be awesome so the first thing we need to do is head under here and right here we need to place a mechanical bearing but first we actually

Need to get power under here and I did think of branching off our power lines but I think it’s going to look kind of ugly and uh so yeah we do actually have an underground uh belt that’s running I think maybe around about here somewhere

Let’s just dig down and uh try and find it I guess there it is okay yeah we should be oh dude it’s it’s literally right next to it what are the chances of that oh my god well that makes life a whole lot easier with this holy crap

Let’s just grab a gearbox we’re going to branch that over we actually need a vertical gearbox bang that is way too fast uh let’s actually go ahead and grab our speed controller that we have here and we’re going to set this to be very

Low how can we set this up to be easier let’s go maybe like that and then large Cog wheel there we go okay next we need to actually pause that because we need to glue everything together but before yeah before we actually do all that let’s just glue so from there to there

Just to test it out and let’s attach it and yes thank God it does work that is awesome now actually before we go into this we do need the thing I was talking about before the sequence the gear shift let’s plug that in here and then we

Should be able to right click this and we’re greeted with like a little bit of a menu here turn by angle okay let’s just test this out let’s go with uh 45° and so we do need to give this power for it to actually do its thing which is

Kind of annoying to be honest I wanted it to just endlessly Loop but that’s okay okay so it’s rotating to the right um how do we get it to rotate the other way I’m guessing by just having it rotate the other way okay there we go this should now hopefully rotate the

Other direction let’s test it out yes it does it goes to the left okay sweet so yeah we do need to set up a redstone uh timer with this okay let’s power this up and see how it goes okay it keeps getting power but it’s not rotating back

So I think that should just be fine hopefully okay everything is now glued together let’s power up our bearing and bang There we go it’s rotating hell yeah that is actually so cool that looks awesome dude now I don’t exactly know what this is doing uh I thought it was

Supposed to reset every time it gets power so yeah I don’t know how that works we’re just going to we’re honestly just going to leave it and let it do its thing and so once it gets to there is it just going to snap back into place okay

No it’s just going to keep rotating uh what the hell why that is not what I told it to do let’s set that to 180 and see what it does yeah okay I’m I’m confused uh you guys can tell me how that works and how I can get it to do

What I want it to do I just want it to rotate around here and then go back and then just keep looping that so yeah you guys tell me how to do that okay but yeah once again thank you so much for the idea I really love this uh even

Though you know it just uh stops and keeps going oh my god dude what tell me how to fix this please I’ll fix it in the next episode all right and so with all of that done that just about does it for this episode if you want to download

The entire power plant with the steam engines and the wind turbines be sure to check out my patreon page for the download thank you so much for watching and I’ll see you in the next video