In the last stream we were working on upgrading our storage situation by getting ourselves our first 16k storage disc and by installing a bunch of regular storage drawers and compacting storage drawers to allow us to offset a lot of the items that we have a large quantity of away from our discs entirely Thus giving us so much more space to work with and at the very end of the last episode we were also working on Crafting up some speed upgrades from pneumaticcraft to allow us to make almost everything in pneumaticcraft faster now what I’ve got ahead and done between streams is I have continued my Base building uh Adventure I have tried to tidy up a lot of the mess that was left at the end of the last episode and so essentially I’ve gone ahead and built four of these semicircular additions to the base on each of the four cardinal Sides we have one over here this is for our pneumaticcraft setups so over here on the left we have our original pressure chamber this is set up in the exact same way the only thing that has changed is I’ve changed all of the drawers here from regular Oak drawers to Framed drawers these framed drawers I’ve made slightly differently to the ones that we made in the last episode those were made with Sandstone these ones here are made with Blackstone bricks uh not the regular Black Stone from modern Minecraft this is uh Ben’s copis black colored Stone bricks these ones right Here that you get from the black colored Stone which of course you make with the regular Stone and the black spray in and then on the front we have marble so I’ve made a few drawers like that and kind of dotted them around just to make sure that everything looks the same other Than that the setup here is basically identical although I did fix the mistake that we made the first time around because initially I didn’t put a hopper underneath my extractinator and so the previous setup that we had wasn’t actually working like it was producing manual but the only reason it was Producing manual is because it was burning through the backlog of lapis that we already had that has now been fixed and so now we are making more lapis and more iron and uh if I do want to actually finish this I do need to do Uh one of these and one of those that’s going to pull the lapis up into the compacting drawer and then that’s going to pull the blocks of lapis over into this drawer which of course feeds them into the pressure chamber and all of that is being powered by the liquid Compressor on the back here at the back we have our oil gener ation system so I have downsized a little bit because we were making way too much crude oil so now we just have three fluid generators each topped with a vibrant alloy block all making crude oil which is then being Used in the refinery to make the diesel the kerosene the gasoline and the LPG we’ve got the exact same setup down here for placing and recreating the scorched iron bricks and hiding out back here we’ve also got our thermopneumatic processing plant and then the only new Thing that’s been added to the base is this second pressure chamber here here which for the time being is just going to be a general purpose pressure chamber for if we need to make anything and speaking of making stuff I think the first thing that I’m going to do in Today’s episode is I’m going to grab some iron and I’m just going to get another stack of compressed iron going because we are going to be doing a lot more numatic craft work in today’s stream over on this side we have our chicken area so I’ve gotten rid of that Horrendous little chicken pen that we had previously and now we’ve got a little cluster of much smaller chicken pens that designated to each individual set of chickens we do have one Rog gold Chicken in here which is not right but we got diamond chickens Emerald chickens gold chickens ender pearl chickens and Then a space at the end here we’ve also got more space of course over on this side with all of our 10 10 10 chickens being cramed into this final pen the only other thing that I’ve done here uh because you may notice we don’t have all Of our chickens none of the dye chickens are here and none of the non 10101 chickens are here no chickens were harmed in the moving of this base all I did was grab the chicken stick I forget the name of it it is called the chicken Basher this guy right here which is Super easy to make by the way it’s one egg one stick and one feather and the idea with this is that you can do a quick bunk on a chicken’s head and it will turn that chicken into an item that you can just pick up off the ground and Then at any point in time you can right click and the chicken goes back down so you just give it a quick Bonk right click and you get an itemized version of that chicken that you can then play Place into a chest of some sort and it Just kind of helps us save space and going forward if we need to do any breeding for example with a glass chicken we can just come in here and take one of those glass chickens out do the breeding and then put them back in When the job is done and we can also do the same with like our diamond chickens these are all one one1 chickens but I do plan on breeding them between streams up to hopefully 10 10 10 chickens so we can start getting diamonds emeralds uh gold And ender pearls much faster and as we go we can then start you know getting rid of the one more chickens and kind of retiring those into the chest so that the only chickens that we have in our pens are the ones that we actually want And right at the back here is all of the nests that we are eventually going to move our chickens to because right at the end of the last episode we did of course set up a little bit of automation over here so all of these chickens are receiving seeds automatically and all of Their wees are being imported through this importer into the refined storage system the plan is going to be to move these chickens along with hopefully some new chickens over to this side of the base uh real quick let me grab a little bit of water fantastic we’re going to Move all those chickens over to this side of the base I’m going to continue to add more chickens kind of around the outside edge and if we need it we can also fill in this space here with even more chickens there’s loads of space to add chickens in the future and we’re Going to start pulling uh from underneath them to the system for all of our resource generation that’s the plan and I’m hoping to utilize drones to move all of the seeds from this Farm over to maybe another draw over here that can then be used to uh distribute the seeds Amongst all of the nests and that kind of leads me on to what I want to work on in today’s stream at least initially and that is getting the pcbs from pneumaticcraft because if we want to get the logistics drone up and running the logistics drone requires a programming Table in order to tell it what we want it to do and to make the programmer we need a finished PCB the finished PCB is also kind of a Gateway into more advanced blocks and items from pneumaticcraft things like the advanced liquid compressor which is going to Allow us to produce pressure faster is GED behind the pcbs because for the advanced liquid compressor we need the advanced pressure tubes the advanced pressure tubes here require the advanced controller and this entire setup here for the laser program again we’ll get to this fairly shortly but this requires Pcbs and so we’re going to start today by getting some pcbs before we do that though I would like to take the sugar that we do have we’ve only got 68 sugar which is unfortunate because I have been on for quite a while since the end of The last episode quite a few hours making sure the base is ready to go and I noticed that when I came over we had not much sugar cane compared to where I thought we’d be after many hours of harvesting the reason for that is quite Bizarre at the end of the last episode I broke this Cobblestone stair here to allow us to access the pipe that we used to extract from this drawer I then didn’t put that back and so what happened between streams is because because we’ve placed a standby upgrade into our collector drone The Collector Drone when it’s not needed like when there’s nothing to pick up will just basically down and it falls to the ground right unlike the other drone that kind of just hovers this guy is passively using pressure that he probably doesn’t need to use right he is currently wasting pressure doing nothing Because we’ve put the upgrade in The Collector drone he doesn’t do that when he is not needed he just falls to the ground almost dead and waits until there’s something for him to do and then kind of comes back to life and starts doing stuff the problem is that this guy Decided to die right above the water here and so he died fell right down to the bottom got stuck under this pipe and then spent a good few hours just hanging out down there not collecting anything and then when I finally came over I noticed that he was completely out of Pressure and a lot of my sugarcane had despawned and so we’re not quite at the amount of sugar cane that I was hoping that we would be at uh by this point in the series but we do have a decent amount of it and as we saw at the end of The last episode if we run all of the sugarcane through our mechanical squeezer which is over here by the way this is the fourth and final section of the base we’ve got another semicircle quadrant we’ve got all of our resource generators here generating all of our different stones and again I’ve just Upgraded these drawers to be the exact same as the drawers over there for a bit of continuity throughout the base uh We’ve also got our little drying tables here and we have our little machine set up as well and now we can take this over And in theory we could make up to 64 speed upgrades with all of that Sugar can because we get four sugar a minimum of four sugar per sugar cane now and we do have a staggering amount of lapis available to us and so I think the speed Upgrades should be pretty easy for us to do the only thing that is really going to bottl neckers is the lubricant but over here we do still have a bunch of lubricant available inside of our Thermon pneumatic processing plant and I’m also happy to report by the way that All of these blocks whenever you break them and replace them they retain their inventory so I broke all of these and then just replace them down in the exact same order same with the ther atic processing plant it keeps all of its uh wees as well when you move it and so I Think what I’m probably going to do here is make a bunch of speed upgrades and I do kind of want to put some of these speed upgrades into the pressure chamber because right now the fact that the pressure chamber is so slow means that we lose a fair amount of pressure also I Do need to keep clicking here because we um we have to keep cycling through the uh the lubricon but over here the pressure kind of builds if I want to make a stack of something the pressure pressure builds inside of the pressure chamber and then lets the iron in but Because the doors are so slow a lot of that pressure then escapes and so it has to spend time rebuilding pressure before it can actually commit to completing the craft and so if we go ahead and just put some speed upgrades into this guy here that should hopefully oh wait no I think We put them into the door yes we can put them in the door here like this and you’ll see down here it says the pressure doors of the interface will open/close faser meaning items can be transferred in or out more quickly which should reduce the amount of of uh Pressure that’s lost whenever we open or close those doors so let me grab some more lampis and let me also go ahead and make quite a bit more lubricant over in the Thermon numatic processing plan and let’s see just how many speed upgrades we can make because even once we fill up The pressure chamber more speed upgrades is going to be very helpful in our attempts to get these finished pcbs up and running okay so not too long later we’ve made 14 more speed upgrades I’ve been talking with the chat and I do think it’s worth putting speed upgrades In the pressure chamber interfaces here but they might be like a um a secondary concern I don’t think they are first partt of coal I think the um the more important thing to do is probably speed up the liquid compressor to get pressure into the pressure chamber faster I think That’s going to be our biggest uh upgrade especially given that the fuel that we’re using here is free the lava and especially given that we can make the lava even faster with just a higher tier block and I do still have a couple more of these vibrant alloy blocks in The system because previously we had five of them down and I’ve reduced that to three between streams another suggestion that’s been made is is that we could also look at getting some bigger tanks and maybe uh pumping some of the fluids here out of these tanks into bigger tanks because right now These refiner outputs Can Only Hold 16 buckets worth each and if one of these becomes full the whole system stops making the other fluids and so diesel is what we need to make more lubricant but if we want more lubricant we have to get rid of everything else now I have placed Down this chest here and I’ve used the Amon tablet to sell everything else but I think it’s going to be easier going forward if we do have more of the liquid on St standby so whenever we want lubricant we can just come over and make A ton of it all at once instead of having to wait for this to slowly but surely produce the diesel and so I do want to look at making some more of these fluid tanks the small fluid tanks alone hold 32 buckets which along with the 16 buckets in here would be 48 Buckets in total but I think we could take it one step further and go up to the medium fluid tanks here making four of these I don’t think would be that difficult the only thing that we don’t really have is a ton of plastic sheets we should have some plastic sheets Already let me quickly check I shouldn’t take that fall damage but let me quickly check in here we got nine plastic sheets so we could make two medium fluid tanks already but making more plastic is also not too difficult as we’ve seen we can just take our LPG and run it through the Thermopneumatic processing plant along the same lines over here another upgrade that has been recommended is the volume upgrade for the pressure chamber this basically increases the capacity of the pressure chamber so that it can hold more pressure the benefit of that is that whenever we go to do a craft Because there’s more pressure just stored passively inside the pressure chamber it doesn’t tank like it currently does right now whenever we try and do a craft we kind of just lose all pressure in the pressure chamber because there’s not that much in there to begin With whereas if we were to put in a bunch of volume of grids up to a maximum of 25 that would allow more pressure to sit inside of the pressure chamber and that way whenever we do a craft it just goes down a little bit but it still has Enough pressure in there to keep doing more crafts and by the looks of it the volume upgrades are not too expensive they mostly just require compressed iron and lampus with a little bit of redstone and then a tiny bit of glass of course in the pressure tube we do have one Pressure tube here and of course we have what it takes to make many many more of those and that’s going to allow us to make a bunch of air canisters 12 seems good and then from there we’re just missing more compressed iron which is exactly what we’re making up inside of The pressure chamber let me once again quickly go for a quick sip on the water canteen here I do wish there was a um a better way of doing this there is of course the the filtered water which could be worth investing it if we get a Bunch of cens going but over here we’ve got more compressed iron we can throw in another stack there to get more compressed iron going as well and bank over here let’s see how many of these can I make 13 let’s put those in and let’s see how that goes it might not be A great idea currently because I think that doing that is also going to lower the amount of pressure in there I think it’s going to take longer to get up but then once it’s up it’s probably going to take longer to come down so what we Should be able to do now is throw say 10 speed upgrades into the liquid conf that’s going to start tanking through the lava but it should also start increasing the pressure faster on top of that we could also of course utilize our time in the bottle a little bit here to Make this faster then maybe make this faster as well although at that point we’re definitely going to be tanking through the lava way too quickly and we could definitely do with swapping out that manual block on top all right so I’ve upgraded to the vibrant alloy block Here this I think is going to take a while uh because of those volume upgrades it’s going to take quite a while to get up to this 2 to five range but once it gets there it should hopefully stay there even when we try and make like a stack of iron so I’m Going to leave this doing its thing for now we have five upgrades in I’ve taken some out because putting all 10 in seems unnecessary we want to put enough in to where it’s kind of breaking even or maybe even slightly increasing in terms of the amount of lava in the liquid Compressor that looks like it’s about right it looks like six speed upgrades is using the lava about as fast as it’s coming in here and so to me that seems perfect we’ll leave that as it is and we’ll come back and check on that a little bit later on in the episode now That that’s taken care of let’s look at seeing if we can’t make these pcbs so the first PCB here is made with two transistors two capacitors and an unassembled PCB I’ll bookmark the transistor the capacitor and the unassembled PCB now the idea for us is Going to be to try and get this assembly controller up and running so that we can make pcbs the easy way but in order to do that we need pcbs because the assembly controller and the associated arms and whatnot all require pcbs and so initially if we want to make a PCB we’re Going to have to do it the Hardway which is with etching acid in an etching tank the etching tank here I don’t believe it’s going to be too difficult for us to make but real quick I am going to go on a side tangine here I’m going to put the Pcbs on the back burner again because you’ll notice we’re not doing great on Power and that is because the solar panels don’t start working until almost the middle of the day the sun is out and yet this solar panel is not producing any energy the sun has to get to about Here in the sky before any power is made and currently this one 40 RF protect photovoltic cell that we have just isn’t producing enough Redstone flux to power the whole system through the night and through the morning when the sun is not producing any power so I think what we Should probably do here is either look to make more of these energetic photovoltic modules or alternatively we could look at upgrading the one that we have to a pulsating photovoltaic module which I don’t think is going to be that difficult to do it’s made with one of the previous tier module one powdered Coal super easy two pulsating iron ingots which I don’t think we have but we can definitely make we have a bunch of iron and a couple of Ender Pearls lying around to make that happen two photovoltaic plates which we’ve made previously and then two double layer Capacitors which are also not too B they do require some energetic Alloys but we made those previously with the red stone the gold and the glow stone and the only other thing required then is fused quartz and the fused quartz is also I don’t believe too difficult to make in The Alex smelter it’s just nether quartz and so any second now we should start to see the uh the sun getting to a point where power is generated there it is you’ll see it’s it’s quite high in the sky before it comes online but if we Were to go ahead and take a nether quartz we can go ahead and smell that into a quartz class in fact I think it was four nether quartz which was required on top of that we can take uh two ender pearls as well as two iron to Make the two pulsating iron and then as far as the two double layer capacitors are concerned we are going to need some more grains of infinity which means we do need to once again grab our grindstone which appears to have been lost in the move that is completely fine The grind Stone not a particularly difficult device to make for now I’ll throw that down here and let me just remind myself of the recipe for the grins of infinity it is Flint in our hand and deep slate or Cobble deep slate in the main hand so Flint in the off Hand and Cobble deep slate in the main hand boom and boom and then we just right click that on here yes shift right click onto here again it’s the Cobble deep slate that’s used not the the Flint the Flint’s used somewhat but not anyway was as much as the Cobble deep slate once We’ve got a bunch of grains of infinity we can then hopefully go ahead and make one 2 3 four of the basic capacitors and then if we want to upgrade these we just just need four energetic Alloys which is four Redstone four glow stone four gold other than that I think we have Basically everything else let me go ahead and make oh we’ll take some lapis with us of course to make some more powdered lapis we need I think four of that to make two of these uh but other than that I think we’re pretty much good To go we might also need a bit more powdered coal because I’m not quite sure how much we have left in the system the answer is one so I think we have everything we need over here here are villagers by the way just hanging out doing their thing thankfully they didn’t Run away when they were freed from their little cage let’s do this and we do want to make sure this is set to uh alloy and smelting so they can make the fused glass once that’s done we can throw in the gold ingot the Redstone and the Glowstone over here let’s do the uh the lapis and I’m going to give this a quick time in the bottle tap just because it’s a fair bit slower than the SAG Mill while we wait for it though we can also put some coal in there as well and we’ll Take that out as it’s done and I think that’s almost everything we are going to have to do the pulsating iron as well also so not a problem boom boom and boom fantastic and boom now I am being told that the fused quartz that we need is Not just regular fused quartz let me see here if I try and do this one and two there’s our double A fasters and we can also go ahead I believe and make two of these photovoltic composite one and two fantastic but yeah if we try and shift click in you’ll see that it Doesn’t pull in the fused quartz there I believe the reason for that is that it does say enlightened fused quartz and enlightened fused quarts right here is made with nether quartz and glowstone so it’s basically the same recipe for nether quartz but we do have to also Feed in for glow stone which is completely fine we have enough glowstone to make that happen perfect so Bank over here let’s once again utilize our alloy smelter boom and boom we’ll give that a quick tap and once that St will throw in the photovoltic composite boom and boom Nice okay that should be everything that we need in order to double the output of this solar panel which I think should be enough to keep things going at least for the time being it’s not going to be a permanent solution are we out of powdered coal again we Are indeed helps if you can spell the word coal let me take you and let’s quickly get that sag milled up but it’s not going to be a permanent solution as we expand out the refined storage system we are almost certainly going to run into Power problems again in the future But this is kind of a stop Gap until we get into the big Power here and look at setting up a big reactor to kind of power the late game base setup for now though doing something like this should double the amount of power generated During the day while the Sun is up and it’s hopefully going to mean that we have enough energy inside of this battery to get us through until the sun comes back up again and starts producing power now that that’s taken care of let’s finally get back to these pcbs so The first thing we need to do is we need to do this recipe right here we need to make empty pcbs for that we need plastic gold nuggets and Redstone torches so plastic gold nuggets and Redstone torches I’ll make a few more of these cuz I think we’re going to do quite a Few of them and at this point we can kind of head back and see if our compressor has managed to get up to temperature it has so in here we’re up at almost two we do have another stack of compressed iron there and B over to Temperature I of course me up to to pressure and so now if I were to go ahead and throw in the required amounts here how much can we make we would need nine plastic sheets if we were going to use all nine that we have here um but we Are limited on Redstone torches we only have 14 of those so we can make a maximum of seven so that would be uh oh sorry we got 13 of those 13 would mean we could do a maximum of six so we’ll do six plastic we will do 12 Redstone Torches and then six multiplied by three is of course 18 so let’s do something like this and then if we throw all three of these in that’s hopefully going to do quite well for us I will put the speed upgrades in there just to make that a Little bit faster because why not we’ve got the speed upgrades we can make that quicker and hopefully we are at the right pressure amount and again hopefully we see the pressure kind of stare somewhat stable it’s going to take a while to fill it up but once it gets Full it should stay full for longer so that’s now done I’m going to take some of these back cuz I think we’ll need them elsewhere this looks like it’s just done nice look at that we got 19 of sorry 18 it look like a nine there for a Second but we’ve got 18 I believe of these empty pcbs and so normally we would take these and run them through the laser program using the assembly controller and we would get the unassemble PCB which we could then craft into a finished PCB however we don’t again currently have access to that and So we have to use the UV light box first to make a PCB that we can then put into the etching tank so the UV light box I don’t think is going to be too difficult for us to make to make it we need need three Redstone lamps we need one Pressure tube we need four compressed iron and we need a PCB blueprint the Redstone lamps here super easy done the PCB though I believe can only be purchased via the amatron tablet thankfully we do have a bunch of scrap and we also have I believe even more Scrap in this chest over here and so for the first time today let’s head back to the Amron template and let’s see if we can actually look at purchasing the PCB so the PCB is here PCB blueprint I would like to purchase one of those place order I also would like to purchase The it says drill and Laser I’m also looking to purchase the laser program we’ll use that later on in the episode We’ll order that as well uh for now it’s taken the uh the scrap so my money has gone and I believe that we should get the PCB nice And so back over in our crafting grid we should now be able to craft up the UV light box we totally can we can then place that down uh we’ll place it over in the pneumatic craft area let’s put it down for now let’s say right about here And then if we place an empty PCB in it uh this does require pressure actually so you know what let’s move this over to here like that that’s going to start to fill up with pressure fantastic and then if we put in an empty PCB that is going To slowly but surely increase its Edge success chance so you can take this PCB out at any point in time and put it into the etching tank but when you put the empty PCB into the etching acid inside of the etching tank there’s a chance That you get a failed PCB the longer you leave it inside of the UV light box the higher that edge success chance becomes and the more likely you are to actually get a finished PCB and not a failed PCB and so we probably do want to leave These in here for a little while I do believe that indeed we can put speed upgrades into here and so if we do this that should hopefully look at that massively increase the speed at which this does its job and so once that’s done with then going to want to take a Edging tank with some etching acid and place the uh the PCB in there so the eding tank is also not too difficult it does require some reinforced brick slams which of course require some reinforced bricks those are easy enough and then we also need two obsidian which we Apparently do not have and I believe between streams I did put my fluid mixer away I did indeed let’s go ahead and get this guy back down uh for now somewhere like here should do the trick um again I do want to look at setting up unlimited obsidian at some Point in the not so distant future mostly just for allowing us to make more void UPG grids I think for our storage draw setup but uh for now if we go ahead and grab two buckets we can get some water from our unlimited water source and we can get some lava probably from This compressor over here because of course that compressor is currently being run almost at Max Capacity but that should be enough to get us I guess just one obsidian and we do actually want two obsidians so you know what let’s grab a second one of those and Although there is water here I’d like to keep my base design how it is so I’ll take the second bucket of water from there as well and that should be everything that we need in order to get one and two obsidian nice uh over here are You at 100% you are indeed nice I’ll throw another PCB in there just because we have it and we might as well and now back over here we should have I think everything that we need I was a I’m a little concerned we did put this panel down like halfway through yesterday and So it’s uh it’s possible we don’t quite have enough power to get us through today but I’m hopeful that tomorrow we won’t have that same problem if we do we might have to look at still putting down more solar panels but I’m hopeful that Once this has like a full day of use we won’t have that problem we should also probably get into the habit of sleeping through the night as well just to make sure that uh that we always have power inside of the controller once we have power again the final piece of the Puzzle here is the etching acid itself which we can make in the pressure chamber with two G powder two spider eyes two rotten flesh and a bucket so rotten flesh I know we have gun powder I’m also fairly certain we have a bucket we definitely have and then spider eyes Look at that we do have as well fantastic can you make these you cannot make these so I guess it’s good that we killed some spiders earlier in the series then fantastic so now that we have everything that we need it should just be a case of throwing all of this Oh it is a bucket of plastic thank you chat that makes a lot more sense actually uh in that case let me quickly grab a a little bit of coal out of here and we’ll throw that into the Thermon pneumatic processing plant along with some LPG here so let’s do you and you That’s going to get us zoc of plastic fantastic and then over here we should be able to throw in the plastic along with the rotten flesh the gunpowder and the spider ey and boom we have a bucket of etching acid and so now we can place This into the etching tank now I don’t believe the etching tank requires any pressure it doesn’t does require etching acid of course over on the right here and now we can go ahead and throw in our empty PCB and that is going to slowly but surely get etched annoyingly you Can’t put speed of grids in here but thankfully we do have our time in a bottle that currently has almost 6 hours worth of time stored in it and so we can also go ahead actually and take this other PCB here and place this in as well Both of these have a 100% hge success chance and so if we go ahead and make this a fair deal faster I think that’s fine actually I was going to make 32 times faster but I think that’s just me being impatient we’re already at 60% this is going to take mere seconds to Complete and once it’s done we should get two complete pcbs boom and boom and by complete I of course mean unassembled pcbs and it’s actually very fast in uh in there as well uh in here you’ll notice the edging acid does not get used which is very nice indeed and uh I do Kind of this is very fast with all the speed up grids I did not realize quite how fast it was I’m kind of just trying to take advantage of the 16 times speed upgrade that we had on there I do believe that if we wanted to hear chant We could set up a little bit of alteration to where we can place the etching tank here we can do something like this I believe to extract the finished pcbs the threshold here is at 100% And so it won’t move them over until it gets to 100% And then if we Just Place something like a hopper on top of that we should be be in business for automation I say a hopper but I think we’re going to need a chest anyway if we want to put in actually that’s not true I think a hopper would work just Fine here because the empty pcbs stack and so we uh at first I thought I’d only be able to put five into a hopper but I don’t believe that that is the case so if we do this and this that’s going to feed into the UV light box the UV light Box is going to feed into the etching tank and the etching tank is going to very slowly but surely with the help of some etching acid here produce the unassembled pcbs that we then need to make the finished pcbs now the finished pcbs here as we saw earlier require two Transistors and two capacitors per PCB these are made once again in the pressure chamber with plastic Redstone gold for the transistor and then the same plastic gold and then slime balls or or copper I guess for the capacitor so I think we’re pretty good on gold Redstone and slime balls how many slime Balls do we have we got nine that’s fine we can make more with the strainers of course and gold and copper we got turn off I’m going to use the copper just because we have so much more of it because it is being made of course by Our copper chicken we’re at over 1,000 copper which is very nice to see so the only we need really to make this happen is plastic sheets so the twitch chat did inform me that we can in fact use the small fluid tank as a bucket for moving Large amounts of liquid so for example we can take all nine buckets of LPG and put it directly into the Thermon numatic processing plan from there I don’t know if we can do the same thing again I assume we can take the plastic out like that and then can I place the plastic Down I can’t by the looks of it I don’t think I can use this to place things into the world but of course from here I can just go ahead and take my bucket and if we just do something like this we’re going to very quickly get all of the Plastic that we need it’s not like the the plastic act as lava so it’s not going to delete any items either and boom we’ve got 14 PL stick and of course we’re going to get way more PL stick from all of that LPG that we just placed In here you’ll see again we’re at 16 more buckets because you do get more than one bucket of plastic per bucket of LPG and so so long as we don’t place the uh the two Source blocks in the same place I think I did just a second ago as Long as we don’t do that we uh we should get all of the plastic that we need nice and uh from there we can look at actually making some of these transistors and capacitors so we have nine slime balls for now I think it’s probably worth using all nine of those So let’s put in nine slime balls with 18 nuggets and nine plastic boom boom boom that should make us nine capacitors and then we’ll do the same thing again with nine Redstone nine plck we could of course make more of these but they’re needed in a one to one ratio so there’s Not really any purpose in making more of the uh transistors and capacitors this does require a few more nuggets in this case we need uh 27 instead of 18 that’s completely fine in here the pressure is doing okay but I would like it to be higher there are a Few things we could do here one is we could look at getting more fluid generators which I think is probably a good idea because our bottleneck really is just how fast the liquid compressor can go and that’s not really going to be too difficult one thing I didn’t mention By the way as well is that we do have this pressure chamber glass now which is super easy to make actually and is probably something I should have made from the beginning it is just four pressure chamber wall and one glass get you four pressure chamber glass you can Use this in the construction of your pressure chamber to allow you to see what’s inside of it I’ve also been using it on top of my fluid generators just because I think it looks a little nicer than the regular glass back over here we do have a bunch Of fluid generators left over again because we had more for crude oil previously uh and we should also have some more floppers as well we do indeed and so if we just go and grab a few more buckets of lava from some of our other fluid generators we should be able to uh Double up and maybe even triple up on the amount of lava that’s being produced over there and make it just so much faster all right so it turns out there is a a slight bug in this version of the mod pack the copper nuggets that you get From the compacting draw are from the better copper mod and they are not the copper nuggets that we want however if you craft the copper Ingot manual you get these copper nuggets from opis utilities these are the copper nuggets that we want you can also do it in a Regular crafting table as well but uh this is not necessary because you can also do it in the crafting grid so Bank over here we should be able to actually get these capacitors and transistors up and running uh I have forgotten how many I need I 18 is the number let we do this so we are full up on pressure now which is is fantastic hopefully we don’t see too big of a drop as these nuggets make their way in it has been pointed out to me though that lava is actually not the Best option in terms of using the liquid compressor and that we should probably look at swapping that out you’ll see the the pressure that didn’t go down too much at all which is is fantastic and we have our nine capacitors let me quickly get the nine plastic nine Redstone and then 18 gold nuggets into there perfect that should hopefully make us wait that’s not right need 27 right put another nine in there that should be the correct amount um but the lava is not very good over here if we click on the available fuels tab inside of the uh Liquid compressor you’ll see that right at the bottom is mol plastic just above that is lava and so right here it says milliliters per mil bucket so every Mill buet of lava gets us 40 milliliters of air pressure in here you’ll see that we have uh you know 500,000 milliliters of Air inside of here that create that pressure and so the crude oil is five times better in the liquid compressor it produces 200 milliters of air per mbet of crude oil that’s five times as much as the 40 that we get from the lava now looking at crude oil from the fluid Generator this guy right here we do get less crude oil we get 2.5 times less so we get 10 ms of crude oil in uh compared to the 25 Ms of lava and we also probably want to look at maybe getting some security upgrades to make sure Stuff like that doesn’t happen in the future because we could definitely do with not losing our liquid compressor but the the moral of the story here is that although you get 2.5 times less crude oil than lava in the fluid generator the crude oil is five times Better as a fuel and so even despite that just by swapping from lava to Oil we’re still going to produce 2.5 times more pressure from the same number of fluid generators and so I definitely think that’s worth doing let’s see if we can’t get another liquid compressor here For that we need another small tank that’s easy enough we need another air compressor that’s also I think easy enough compressed iron I do believe we have I think it’s just over in this chest over here we also of course now have our capacitors and our transistors And so back over at the crafting grid we should be able to throw together our first couple of actual finished pcbs let’s do this this and this boom and boom fantastic we’re going to need those momentarily uh back over here though can I make some of this I totally can we can Then go ahead and I thought I was getting attacked by a mob then but it’s not it’s just a fish floundering in the corner there that is is completely fine let’s do some of these let’s make one of these and then I think the only thing We’re really going to be missing uh as per usual is leather but we can always craft our rotten flesh into bundle flesh and then of course dry that out over on our trusty dry wreck over here to get us a little bit more in the way Of leather one more leather is all that we need fantastic again once you’ve done the first craft the subsequent craft in the drying rack or the soaking rack are substantially faster which is very nice indeed and boom there’s our liquid compressor the liquid compressor I do believe can receive security upgrades The security upgrade here is definitely I think worth it in this scenario it does require the uh the safety tube module which we do have I believe it’s over in here although oh gosh I didn’t realize it actually like spawned out uh lava although the lava here is coming From the uh the the fluid Hoppers these do Place lava into the world which is is not ideal so we can place this I think right back down because right now it doesn’t have the speed of grids in it so right now it’s going to be uh completely Fine what I will do is I’ll make another pressure tube I think that’s going to be worthwhile and I’ll also quickly make four more blocks of obsidian as well to allow us to uh to make that safety valve and we’ll get that safety valve installed hopefully in the liid Compressor before I do that let me quickly check that I can in fact put the safety valve into the liquid compressor I can the security upgrade here adds a built-in safety valve to the machine automatically releasing some air if the pressure would rise Into the Danger Zone I think having that in here Is going to hopefully prevent the uh the kind of explosion that we just saw from happening in the future 1 2 3 4 that should get us for obsidian it totally does and I think that should be everything that we need to get the security upgrade let’s see if We can’t make it happen we do need another one of these safety modules but those are not particularly difficult to make that gets us a safety 2 module and from there boom we have the security upgrade we should probably make of these for a lot of the the systems that we Have around here for now though if we put this in we should be able to re the speed upgrades and hopefully now as the pressure gets higher it should just release that pressure at least that’s what I’m hoping and we shouldn’t see any explosions along the same lines though What we should do is we should definitely go ahead and grab three buckets of crude oil we’ve got a ton of them back up over here three uh going forward at some point it might be worth looking at using something like LPG as our fuel source instead the LPG of Course oh that totally works look at that you’ll see as soon as it gets there it uh it dips it down so it’s hopefully never going to explode the LPG though as we can see here is by far in the way the best fuel and it doesn’t really cost us Anything to turn our Loy into LPG right other than another one of these setups right or even we could look at siphoning off the LPG made here especially if we uh can keep all of these others kind of taken care of we could look at getting a Fluid trash can as well as a way of deleting any excess fluids that we don’t want to keep the whole thing going for now though I think crude oil should be more than enough for us and so uh let me go ahead here I don’t want to lose these Vibrant alloy blocks they are by far and away the most important part of the setup here and so we’re go one two and then I’m just going to place some glass down to delete that last block of lava we don’t really need it three fantastic Uh let’s go ahead and just wait for that to uh kind of take care of itself and once that lava is gone fantastic we can do one two and hopefully three hold on this is much more difficult than I intended it to be that’s fine uh let’s get rid of you Let’s go three and three perfect okay it’s going to take a little while for the lava to to run out and by a little while I mean almost no time at all but once that’s gone we should start to see more pressure being produced and along the same lines Here let me get the leaking gas sound turned right down cuz that is obnoxiously loud but now we are you know wasting some pressure here but I think that’s fine this is completely full we could look at putting more volume upgrades in here again just to kind of Add in even more safety to the amount of pressure inside there let me give this a quick test though now to see if those volume upgrades are actually worth it so if I take another stack of iron and I go to place that stank into the hopper do We retain a lot of this pressure when the full stank goes in so the full stack is going to make its way into here and then of course into the chamber and I’m hoping that by the end of the cramp we’re going to end up with 64 uh Compressed iron in our chest and hopefully a decent amount of pressure still in the system ideally enough to do it again if we needed to like get another stank of compressed iron so it definitely does still go down but nowhere near as much like we still got enough pressure in Here to do that again which was not the case before before it would go right down kind of below one and then we’d have to wait a while it would take a little while to do the full stack this time it was pretty fast and so I’m happy With that that looks good to me and we’re also backing up on crude oil here as well which is good even with the N speed upgrades which is good to see perfect okay so back over here we now have two of these uh pcbs right uh these Two right here now if we wanted to be able to make the pcbs quicker in the future if we wanted to get rid of the usage of the UV light box and the etching acid which I don’t know if that’s strictly necessary because the UV light box and the etching asset are not Actually that bad but if we wanted to we’d have to utilize the U assembly controller in this Associated setup here as well to make that happen we would need three four 5 6 7 pcbs in total seven finished pcbs right now we’ve got two and I believe we’ve Got the capacity to make not many more because of the number of uh capacitors and transistors that we have we only have five of each remaining uh over in our eding tank though we should have quite a few unfinished pcbs we do we got 16 of them ready to go and so I guess real quick I’m going to go ahead and make some more transistors and capacitors to see if we can’t get enough pcbs for us to set up the assembly controller for the laser program uh and down here it looks like we should be Good on power I think night has fallen we’ve got 170,000 Fe backed up in here with the extra 32,000 in the tank as well so we could sleep to skip the night but I’m hopeful that this new solar panel should be good enough to not require it and not too long later we’ve Got 32 more transistors and 32 more capacitors I decided to make a bunch of extra transistors and capacitors just so that we’re not worried about making them in the near future we don’t need that many of course because we only need I believe seven finished pcbs and so we’ve Got two three 4 five 6 7 fantastic with those we should now be able to make the assembly controller the assembly platform the assembly IO unit for export the same for import and the laser so for each of these there are other things that we’re going to need but for the Most part I think we have a lot of that stuff so there’s the assembly controller done the assembly platform requires two pneumatic cylinders which needs a Canon Barrel which requires some more reinforced brick wall which requires yet more reinforced brick that is fine let’s utilize that to make some more brick Wall I have a feeling that we’re going to need more of that and so I will actually go ahead and make another set of those walls kind of preemptively uh that should be cuz we need a lot of these screwdrivers actually we need a lot of these pneumatic cylinders Actually so um let’s do a few of these and you know what let’s do another bch yeah let’s do this I think even then that’s not going to be enough of these uh Cannon barrels but we’ll see how it goes because we need many many more of These and we’re also going to need more plastic as well because you’ll see we’re already out there one thing that was pointed out to me that we’ve been using over here is that the Flopper is actually pretty good for plastic automation we can probably set plastic automation up fairly easily now because We have plastic available to be made in here currently we are out of Co in there but let me quickly go and grab some more coal to get that going if we were to place the coal in what we can do is we can fill up the small fluid tank with the mod Plastic like so and then we can place that on top of the Flopper and the Flopper just places the liquid down in the world as soon as it’s filled up and then that turns instantly into plastic sheets if we were to place a hopper beneath that that would collect the Plastic sheets and that would kind of be plastic sheets just alterated which is is pretty nifty stuff so let’s take this let’s do the same again here boom and boom we are pretty much out of LPG again that’s kind of just due to the fact that we’re backed up on everything else and So what I think we should probably do and also of course you can accelerate the Flopper with the time in the bottle here to make the plastic production that much faster but I think we should maybe go back to what I was talking about at the beginning of the stream and look at Upgrading the uh the tanks here and by upgrading I mean adding some extra tanks to buffer large amounts of the different fluids I do think though it’s also probably going to be worthwhile setting up a fluid trash can to allow us to delete any excess fluids that we don’t Want for now though let’s see initially if we can’t get some of these tanks down so if we wanted to make four medium fluid tanks we would need eight small fluid tanks which I think should be doable uh the only thing we don’t really have is the iron bars we should have a Bunch of compressed Iron by now and if we really wanted to we could make more very easily uh 2 3 4 5 6 78 perfect from there plastic again is kind of our limiting factor here one two and we’re just missing one more to get to three Which is unfortunate I believe we have our fluid pipes in our backpack we do indeed and so from there let’s go ahead and let’s throw down the fluid pipes here here here and here this one is not correct people in the twitch chat are asking if the other fluid pipes are Cheaper I do not believe that they are cheaper I guess um but they’re not as big this one only holds 16 buckets whereas this one holds 64 so it’s four times as large you’d have to go up to the Diamond version of this tank to get The same capacity as the Gold version of this tank so I do think these tanks from patcraft are better you can also pick them up and use them as buckets as well which makes them useful for the future so we’ll disconnect here and then we’ll set like this and this to extract mostly Because the diesel is is not full yet and then we can do this and this to allow us to to start transferring that liquid over which again is going to start making more LPG for us that LPG we can of course use to make more plastic And then that plastic we can use to make two more tanks to fill up this wall now I think if I’m not mistaken I think that the fluid pipes from pipes I think they work on a nearest First basis but want to give that a try so if I Disconnect that we’re going to do a little bit of science here let me go and get another tank because if they work on a nearest First basis and what I mean by that is that they they put their liquid into the nearest tank that they can as opposed to Distributing evenly between Tanks in here you’ll see it looks like it’s actually not set to that if I put this tank here yeah see this is unfortunate this tank is the closest but it is still putting some uh kerosene in here the reason that’s a problem is it means that we can’t put a fluid trash Can down over here to delete excess kerosene unfortunately and so if we wanted to be able to delete the excess we would have to get I believe the advanced pipe UPG grid let me check over here I did make another improved pipe UPG grid and we replace the hopper so That we can pipe into the pressure chamber faster over here this is fine okay so it takes the improved pipe upgrade I believe to add the distribution if we change the distribution from round robin to nearest First now if we put another tank down over here it shouldn’t get any kerosene Until this tank is full and so we’ll see here the kerosene at the top there is going up but there’s no kerosene over here that is exactly what we want because what that means now is that we can just put a fluid trash can down over Here and we will fill this tank up with 64 buckets of kerosene once we get past 64 buckets of kerosene if there’s still more being made any excess will just get deleted which is I think ideal because that allows us to keep producing all of Our liquids all of the time and we don’t end up in a situation where we’re backed up on kerosene and diesel but we’ve not got any LPG and we need LPG for plastic so I think what we’ll do here is we’ll go ahead and craft up three more of These tier 2 pipe upgrades so that’s just three more basic upgrades one two three and then three more improved pipe upgrades one two and three and then over here we can just go ahead and do something like this and we’ll also make sure all these are set to extract as well Boom and boom we’ll make sure all of these are set to nearest First like so like so fantastic and then the fluid trash can I don’t think is too difficult for us to make fluid trash can it requires a bucket some Stone and some Cobblestone super easy stuff and I think What we probably want to do here it’s going to look a little janky if we put it all the way out here so I think we can probably bring it closer cuz that’s still going to be the closest thing for it let’s go ahead I think even putting it here would Be fine and then we could do something like we’re G have a tank there of course so we can do this H we don’t want those to connect so we’ll disconnect that disconnect that reconnect that and then reconnect that I have no idea how I Managed to mess that up so badly but if we do that um right now that is going to delete just the diesel which is not ideal but we’ll connect that up there uh the second one is ready to connect up so up here we can do this and this again Don’t want that to connect up here and don’t want it to connect up uh there really either and so that should have the same effect where it’s going to try and put the gasoline in here first and then if it can’t you’ll put in the trash Can same with the kosine here you’ll see these are still going up which is perfect uh let me grab the LPG that we have again we can use our tank here to move that over so we’ll do this and this that should get us enough plastic for The final two tanks and once we have those final two tanks down we can then connect up the fluid pipes here to here and the top one I might connect round to the bank cuz I don’t think we really want these pipes Crossing because if they do cross there’s a chance that the Wrong liquid ends up in the wrong tank so it might end up looking a little odd but I think that should be fine all right so not too long later we now have four tanks down and they’re all piped around into this trash can again the top One there goes on a bit of a winding path to get around and to the trash can but all the rest of them go pretty short distance but they all should fill up these tanks first and then only after these tanks are full will they start Deleting any excess to make sure that we have an even amount of everything and that everything is still being produced cool um now that’s done we’ve got more plastic I’ve been using the LPG and the time in the bottle on the refinery to get more plastic we’ve got 48 sheets Here with the ability to make even more if we need it but Bank over here let’s see if 48 is enough to get the remaining items so the assembly platform easy enough then we need the assembly i unit export this requires another screwdriver that is completely fine boom we also Then need the import which is the export which is crafted or the same again we need two more of these pneumatic cylinders which means we do need another one of these guys so we need some more pressure tube that’s easy enough along with more reinforced brick wall that Should be completely fine let’s make more of this let’s do more of this let’s craft all of that into some wall and then let’s craft that wall into yet more of these cannons down here boom we’ll get a few more of those that’s going to Allow us to make more of these and then with those we can make the import unit and then finally the laser itself just needs one glass apparently does have to be red stand that’s fine and then I believe we just need one more set of pneumatic cylinders and of course the Red glass which does require oh you can spray glass in the sprayer that’s interesting and might not be a terrible idea actually we can make red dye using a couple of different items can you not oh you can craft beets I was wondering why you’d go with the eggs and clear Recipe but um we have Relic scrap I believe over here and and so I think what we and we also have the laser uh program as well which we bought earlier that’s going to come in useful in just a second here over in the catalog we can Purchase the red we can just purchase the D actually sure fine we could have also purchased the spray cam which I guess would have allowed us to um to spray more glass in the future but I don’t really think we need to spray that much glass to be honest I think we can Just go ahead and do something like this and something like this and now we should be basically good to go so if I’m not mistaken this does require pressure and so I’m probably going to set it up somewhere around here let me go ahead and pick up the etching tank I Do want to make sure we get that etching acid first it might stay in there uh even when you break it I’m not entirely certain also let me put some of this stuff in my backpack just to kind of free up a little bit of space here get Rid of you get rid of you and get rid of you fantastic and then what we’ll do we’ll put down the controller let’s say right about here I believe this is what requires is the the pressure then I believe we want to put the assembly platform in the middle and then around That we want to put the import we want to put the laser and the xort I don’t think the specific orientation matters I think all that matters is that we get them down around the platform and then now we just need to get some more of the Pressure tubes to allow us to get pressure into the controller so let us go ahead and make more of these fantastic we can then pull pressure off of our liquid compressor like this fantastic that’s going to put pressure into here we should still be voiding excess pressure I hope yes throughout the System so uh the pressure valve that we have is going to do the trick and also the liquid compressor is also kind of voiding excess pressure as well which is good and so now we have our export our laser and our import I believe if I’m Not mistaken we want to have chests down next to the Import and Export to allow for the automation to occur here so log wise we do not have enough do I have any chests I have one chest in here which is uh not ideal oh we can make more chests With the Minal locks fantastic okay so with the mineral chests that we now have we should be able to throw down I believe an export here and an import chest here and I believe if we put the laser program into the controller that we have here we can do something like This and using this we should now be able to turn empty pcbs into unassembled pcbs and this time the empty pcbs can be made just straight from the pressure chamber so let’s give that a try if I go get some Redstone torches we do of course have a lot of um unassembled pcbs That we can use to make more regular pcbs in the future but after that going forward we would like to just be able to turn these empty pcbs straight from the pressure chamber into regular pcbs so for that we need more Redstone torches I’m going to go ahead and make just a Stack of those we got a lot of redstone at this point and then we need gold nuggets and plastic so plastic we have gold nuggets we also have I’ll take more just to be on the safe side here and then let’s go make some more of these let’s put In let’s say we’ll do 10 plastic like so 10 plank stick is going to require 20 Redstone torches and is also going to require uh 30 gold nuggets you’ll see these are moving out somewhat slowly this is why I made that pipe upgrade earlier but we Have since moved that pipe upgrade to a different pipe and so we should definitely go ahead and get another pipe upgrade made here boom and we’ll throw that of course back in over here to allow items to move faster into the pressure chamber the pressure chamber Has a ton of pressure inside of it thanks to that uh stack of volume upgrades and so we should see uh very soon here all the pcbs nice and with those pcbs we can then put them I believe in into the import chest like so and if I’ve set this up correctly it’s Going to work now you’ll see it’s very very very very slow to begin with the uh input arm is going to grab I believe one PCB it did out of the chest and then it’s going to slowly but surely place it onto the center panel and then once it’s placed Down very carefully has to be done with Precision then the laser is going to very slowly make its way over and do some etching on the PCB that’s going to make a finished PCB which is then going to be you guested very slowly moved by the export arm to the export chest of Course in here we can put in speed upgrades to make this all faster and if we were to go ahead and we steal some speed upgrades from here temporarily we could do this I believe 10 is the maximum number of speed upgrades it is indeed and you’ll see now that it’s Doing this all much quicker and so it’s just going to take the empty pcbs from here place them in nice and fast there we go laser them nice and quick and produce the unassembled pcbs we can then take those craft them with the transistors and capacitors and we get Usable pcbs that going forward we can use for all kinds of stuff namely we can use them for the programmer that’s a table that we’re going to have to use if we want to get a logistics drone to move our seeds for us but also we can use Them for things like the advanced uh liquid compressor this guy right here which is able to burn through fuel faster just by itself even without the speed upgrades and also is able to produce a higher mix pressure which I believe is going to be useful for later On in the pink and if I just type in PCB here and press U you can see that there’s quite a few crafting recipes here that do require those finished pcbs including these pneumatic armor pieces which I’ve not used before but look pretty cool I believe we can also Upgrade these uh this helmet can be upgraded uh in a charging station and we can add upgrades to this to make it even faster I believe we can get some kind of like pseudo jetpack on that as well which would be very useful and maybe even some speed upgrades as well and Yeah I think that could be a useful piece of armor because we we do have to fight the Wither at some point down here there’s nether star that is required and so I do think that uh that armor could potentially be useful I’ll have to see How good it is at actually defending us but that is a problem for future Isaac for now I’m going to go ahead and wrap up this episode of desert opis There N Video Information
This video, titled ‘Minecraft Desertopolis | ROBOT ARM CIRCUIT BOARD CREATION! #10 [Modded Questing Survival]’, was uploaded by Gaming On Caffeine on 2023-12-03 00:15:00. It has garnered 17611 views and 684 likes. The duration of the video is 01:00:36 or 3636 seconds.
Minecraft Desertopolis | ROBOT ARM CIRCUIT BOARD CREATION! #10 [Modded Questing Survival] with GamingOnCaffeine ★Minecraft Techopolis 2 | A NEW KIND OF FACTORY AUTOMATION SKYBLOCK! #1: https://youtu.be/p_MCqF01VTI
★Watch Live On Twitch: https://www.twitch.tv/gamingoncaffeine
★Support the channel on Patreon & get access to all the GOC Patreon servers: https://www.patreon.com/GOC
★Join the GOC Discord: https://discord.gg/goc
Techopolis 2 Mod Pack – https://www.curseforge.com/minecraft/modpacks/desertopolis
Desertopolis is a questing based Minecraft mod pack for Minecraft 1.20.1, can you survive in the harsh desert?
Desertopolis is a completly custom world featuring custom structures and Yungs amazing structures as well. Has thirst and temperature, and has loads of custom recipes and automation things
Music Licensed From Epidemic Sound
#Minecraft #Desertopolis #Modded