Hey guys welcome back to Fed Ex gaming and today I’ll be showing you guys how to build the entire five nights at Freddy’s one map on Minecraft now this is going to take a very very long time to explain how to build so if you do enjoy the video please make sure to Leave a like it’s going to take a very very long time to show you how to build everything in here all the props and everything is going to be shown how to build so right here is the little control room I’ll even show you how to build this nice little redstone doors to Open up I just did a tutorial on these so I’m gonna be doing like a quick little like you know tutorial of them but it has everything in your all the props all the cameras the storage room let’s just fly over we have the storage room we have the dining room we have Pirate Cove we have the stage with Freddy chica and Bonnie oh and of course we have foxy we also have the management room over here with all the heads we have both bathrooms the kitchen and then I also added a little freezer for fun but this is going to be the entire thing Guys it’s gonna take a very long time to explain I’m pretty sure I’m going to have to break it up in two parts but here we go guys let’s start building the entire map of five nights at Freddy’s 1 on minecraft alright guys so first we’re Going to need a 52 by 39 spacing and you’re also going to need enough room to dig down for so if you are building this on flatlands and you’re going to have to raise it up at least one level this is just in case you’re doing the doors you Know the opening doors if you’re not doing that then you don’t have to worry about raising it up at all now as you see at the bottom left hand corner there’s some yellow lines in between those lines from the yellow into the other yellow line is 20 blocks from Exactly that line to that line because that’s where we’re going to be starting gonna be starting 20 blocks in so from the left side from the one yellow line to the other yellow line is 20 blocks so let’s start building this thing guys alright guys so the spot we’re gonna Start off building first is the area with the doors and the lights and this area is going to be a 7 by 9 spacing so let’s go ahead and jump right into this thing guys so the pretty much every block you’re going to need for this especially if you’re doing it on this Texture pack I’m using the plastic texture pack but it’s also gonna look great on just about almost any texture bag you’re going to need white stain clay like grey stained clay gray stained clay black stain clay and cyan stained clay now we don’t have to take out the Cyan right now but this right here is going to be pretty much the majority of this build is so what you’ve got in your 7×9 spacing right in this area now like I said if you’re doing this on flat lands then you’re going to have to raise It up at least one higher for the doors if you’re not doing this on flat lands then obviously you don’t have to abide by those rules so inside this little area which would be a five by seven spacing we’re going to go ahead and make our floor and our flooring is gonna Consist of white stained clay and black stained clay literally every single floor is pretty much white stained clay and black stained clay throughout this whole entire bill so we’re gonna make a nice little checkerboard pattern like this it doesn’t really matter which way you started just make a nice little Checkerboard pattern and there we go there’s all our white stained clay like that and then we’re gonna take out our black stained clay and do the same thing and just fill in all these little blocks and make a nice little checkerboard pattern across the whole entire floor Next what I want you to do is take out your light grey stained clay and right around the border that we have this 7×9 spacing we’re gonna fill in this whole entire area with light gray stained clay now if you’re wondering what these red blocks are right here for this is where Our doors are gonna be going every single area that has the red stained clay is doors and then the green stayed clay is four stages such as you know the area with Freddy and Bonnie and this area has foxy in it so just giving you a little heads-up with that so now we’re Gonna go ahead and build our door now I just did a tutorial on this and I’ll have a link to that tutorial this is going to be a very easy door to build so if you want to go over there and like learn all the mechanics a lot easier They could do that however I’m just gonna be straight up building this as fast as possible so you don’t let me get rid of my buttons right here we’re gonna be building this pretty fast so if you want to get a better understanding of it Then go ahead and check out that and I’m gonna take out a pink there we go let’s take out magenta so right here off ours pretty much our checkerboard pad and we’re gonna come right here where I put this block I’m gonna dig this down we have to dig down At least four blocks so you don’t really put a block it’s gonna be no let’s go like this you have to dig down at least four blocks so one two three four like that see how it’s four blocks down that’s why I said if you’re doing this On flat lands you need to raise your level up at least one more now on top of this red stained clay we’re gonna go ahead and put a sticky piston and a normal piston like that and then on top of the normal piston we’re gonna put two Pieces of gravel one two and that should line up exactly with your floor see how it’s lined up perfectly with my floor beautiful that is what we want and now it’s gonna dig out this little area of glass right here because we’re gonna need the spacing like I said if you want To go to my tutorial that I did this on it will help you in the long run so I’m gonna just dig out this little area right here as well so if you’ve watched my tutorial you know it’s a pretty simple thing all you have to do is just Put a sticky piston facing downwards off the second gravel block right here because that’s where our buttons going to be going then we’re to go ahead and put a block in front of that sticky piston and then on this side of the corner the left-hand corner we’re gonna Put a block with a furnace go inside a furnace I’m gonna stick a random block in there I’m just gonna use dirt like that then we’re gonna put a block on this side with a comparator running out of it so when our sticky piston extends down to here I just see the comparator Comes on it goes off comes on it goes off so when that extends down we’ll get a signal coming from this then what we want to do is come over here where our furnace is and we’re gonna put a block right next to this piston and we’re Gonna put a piece of redstone dust on top of that and I did not take out redstone dust that was pretty silly of me so let’s take out some what’s dust an we’re gonna put some redstone dust on top of that furnace like that and then We’re to put a comparator going into it like that then what we want you to do what I want you to do is going into this block behind your comparator we’re gonna put a hopper like that then we’re gonna delete this block and then go into sneak Mode and put a hopper going into this hopper just like that then what you do is go inside one of your hoppers it doesn’t matter which one and then just drop an item in there just but one item in there so now what your comparator should be doing over here it’s Flickering on and off see how it’s flickering on and off beautiful so now our button should be working so if I go up here and stick a button up here so we just place a block down right here and we’ll put a button here and if I press This button as you can see the sticky piston extend down beautiful that is what we want next what I want you to do is right here in front of this comparator is put a normal piston facing upwards with a gravel block then put a block down from that And put a repeater coming out of this grab a block on one tick delay then in front of the repeater we’re gonna go ahead and put a sticky piston so you can go into sneak mode and just put a sticky piston in front of the repeater like That put a block in front of the sticky piston then a one block over from this block we’re gonna go ahead and put a torch and then put two blocks going this way one two and put some redstone dust on top of both these blocks one two like That and then more to put a block in front of the redstone dust a torch to the side and then a block on top of the torch now if that was too confusing for you like I said I have a link to the tutorial in the description below it Will be a lot easier for you to follow that tutorial I just did a quick one so now when we click this button as you can see the gravel door goes down click the button again and the gravel door goes back up and now we’re gonna do the same Thing on the other side however I’m gonna rush right through that one since you know I just showed you that one so we should come over here dig down to where that block is put a sticky piston a normal piston two pieces of gravel like that make sure it’s lined up with Your floor let’s just dig out this area real quick there we go dig out this area as well next what I want you to do is find the area where your buttons gonna be going it’s gonna be going right here so we’re gonna delete this block up to The second piece of gravel and put a sticky piston facing downwards with able to walk in front of it and then a block down here they’ve locked down here put a comparator going that way towards the bigger area and then we’re gonna come over here and put a furnace on this side So let’s put our furnace on this side like that and then we have to put at least one item inside a furnace so let’s just put our furnace inside of our furnace they’re gonna come up inside here and we’re gonna put a piece of redstone dust down on top of the furnace Come a block over next to this you know me get out blocks though there we go then we have to put a block next to this piston put a comparator running into that block and I’m gonna put a hopper going into the side of this block delete This block right here and put another hopper going into the side of that one and then we’re gonna go ahead and do nope not do that I’m gonna throw an item inside this hopper so now we’ll make our thing pretty much keep pulsing on and Off on and off like that so now our button should be working and then we’re to come over here we’re gonna put a piston facing upwards with a piece of gravel or sand on top of it block down from that put a repeater going this way on one take the leg go Ahead and stick a sticky piston in front of that repeater not a regular a sticky piston there we go with a block in front of it a torch down right here I’m ready to go in fly mode ago two blocks this way one two with redstone Dust like that then we’re to put a block in front of the redstone dust a torch off to the side makes that piston extend and then we’re gonna go ahead and put another block and top of that torch to make a double extend all the way up then We can go ahead and add in our other button but before we do that we want to make sure our checkered pattern is perfect up here so I already know my door works since you know I’m the one who made it so you might want to like I Said check out that tutorial so now what you to do is just take out your black stained clay and white stain clay because now we’re gonna go ahead and put our border around this area so I already added white stain clay over here for my button for this door so pretty much We’re just gonna go white black white black all the way around this area so we can figure out what color is supposed to be over here so where this white stained clay is we’re gonna put black stained clay then white stained clay then black white black and then so on and so forth All the way around the lip make sure not to do the corners you know the corners don’t need to be done and it’s going to screw up your pattern if you do the corners anyway so black white so that means this one’s gonna be white so now We can add our button here make sure everything is working so the door opens up and the door closes beautiful so then we’re just gonna go all the way around some right here supposed to be a black stained clay so white black white all the way around to the end of the other Side so just keep going all the way around and there we go beautiful everything matches up perfectly and we’re gonna go do this one more time on top of here so up here we’re just gonna go another row of checker pattern all the way around and there we go there’s Our whole entire checker pattern room next what you do is take out your dark grey or your just your grey stained clay and we’re gonna put gray stained clay all the way around the top right here so go all the way around your top with some Gray stained clay as well and this will make pretty much this is gonna be the producer hole color of all your walls throughout this whole entire bill just giving you a heads up so there we go we have the entire room and now all we have To do is just the aesthetics for the room now this part is pretty much up to you you can do whatever you like here but what I like to do is I like to place a staircase a stone staircase like that in the left hand corner and then right Next we’re gonna put another stone staircase just like that so looks something like this and I’m gonna put two slabs and then another stone staircase just like that and then we’re in a double layer this part up so do the same thing one more time so go ahead and do this Like that there we go then we’re gonna go ahead and put two normal slabs and then a slat staircase just like that and that will be our table that’s what you want to do is the screen so I like to put a piece of cobblestone walling right There and we’re going to need some black stained clay for this part we’re gonna put a black stained clay like that then we’re to put an item frame on top of it and put a piece of glass inside the item frame and that’s going to be your Television now I know there’s a few other TVs around the area as well so what I like to do is take out some netherrack stairs and put another rec stair there and another AK stair just like that and then what I did was I go I Went ahead and I put some item frames on these ones as well just like that next what I did was I put a piece of grey stained clay here and then I put a stone staircase facing this way and that’s going to be another television I’m Pretty sure I might have put a painting on there but I don’t know and then all you have to do is just add some pictures back here for you know like posters and things like that obviously you could choose whatever you like I’m just gonna put random stuff right there and then I Just took out some levers and I went one two three fourth levers and I flipped them all the other way just like that next what I want you to do is go outside right over here and inside this corner we’re just gonna match up this area Right here with a black stain clay and a white stain clay we’re gonna do the same thing on the other side as well inside this corner we’re gonna go and put a black stain clay and a white stain clay just like that now the reason why we are Doing that is because we have to put in our windows so right here we’re just going to delete these four blocks and we’re gonna put two glass panes like this and like this and that’s going to be our window we do the same thing on this side to leave these two right here And then put a glass thing block here here here and here like that and those are gonna be our windows for our area and then last but not least we just have to put our chair in where we could sit so right here off the wall right in the Middle we’re gonna delete the second block so count up one block one and then delete this block and go ahead and stick an end portal frame in here or in a champion table it doesn’t really matter then right on top of your ender portal frame we’re gonna go and put a block on Top of it put a rail and then put a minecart on top of the rail then delete the block and your minecart should fall down inside the end portal frame and as you can see I cannot move the minecart because technically it is down in that One spacing of a block then we’re gonna go ahead and put our chair in like this see if it doesn’t go in like this if it doesn’t go straight in that means it’s too close to what you have to do is just go one more block away then right off The chair we’re gonna put a piston to facing towards it and it should push it oh I have the lever there so it actually pushed it but if you don’t have your lever on or something and it’s like this then just use a block of redstone just to push it Like that and now that it’s pushed over one more we just have to put another piston right here and push this one in as well like that and there we go now we have our seat that we could sit in no so now we could sit inside of our seat Inside of our five nights at freddys area and open and close the door beautiful alright guys and that’s our whole little inside area for where we start off at done so what I want you to do now is just open up these two doors because we got to make sure everything Matches up while we are building this so now we’re gonna go ahead and do this little outside area hallway so we’re hallways are going to be a 5 by 17 spacing and you can see right there so now let’s just go ahead and start doing This all you need to know is it says 5 by 17 spacing down to over there so now all we have to do is our checker pattern so make sure it lines up with this checker pattern so it goes black white that means this will color right here is Going to be black as well now the whole way to do is just put in our checker pattern so I like usually doing white first because I made my board or black so we’re gonna go ahead do white stain clay first so just make your checker Pattern all the way around the area like this I’m just gonna fill in our whole entire checker pattern all the way down to the end of this hallway I know it’s very tedious but you have to do this since and five nights at freddys they have a checkered pattern going pretty Much throughout the whole entire place so let’s go ahead and fill in our entire checker pattern so once you’ve got your entire checker pattern put in for your flooring next what you do is take out your light gray stained clay and we’re gonna go all the way around the lip just Like we did inside the little areas go all the way around just like that and then come over here and go all the way to this side as well now we have to put in our checker pattern around our entire area over here so I have to do is Literally just follow this and you’ll be fine guys just follow this part right here and you’ll be absolutely fine so we’re gonna go right here and go black stain clay because there’s white stain color there and then black and now we’re gonna do a checker pattern all the way Around so I’m just gonna take my black stain clay and go literally all the way around this little area until we pretty much fill in the entire area and make sure you come off this side don’t just go randomly over there come over here and make sure it lines up with right Here and there you guys have it as you can see my entire checker pattern there is no blocks that are standing right next to each other so it doesn’t look bad at all next what I want you to do is once you got your checker pattern in is just take Out your dark gray stained clay and go all along the tops of these blocks just to cap off the area now we’re not going to worry about right there for a second because we’re gonna be putting our door in there so let’s just get this whole little area in with our gray stained Clay now we’re gonna do this hallway and it’s the same as the other one it’s a seventeen by five spacing so let’s go ahead and start the soft size you see there’s a black stained clay right there so now we just have to make the same checker pattern that we did over there And there you guys have the entire floor is put in no we’ve to do is just take our light grey stained clay and go all the way around the lip and then we just have to put in our checker pattern for the walling now once you got your Walling and then all you do is just take out your darks grey stained clay again and then just bring it around the top to cap it off and there you guys have no.you of both hallways done and the control room next for your storage room you’re going to need a ten by five Spacing now make sure you count from the walling over one two three four five do not count straight off the wall one two three four five or it won’t line up well so just remember it’s a ten by five spacing straight off the wall now always to do is just make that checkerboard Pattern for the floor so let’s go ahead and do that real quick so right here is where it white stain clay is and we’re gonna go ahead and make our checkerboard pattern once you got your checkerboard pattern in take out your light gray stained clay and do the same thing just Go around the entire lip and now we’re gonna add in our checkerboard pattern for our walling so come over here down here to the left-hand side and right where this white stain clay is we’re gonna put another piece of white stain clay and another piece of black stain Clay so it matches up with this walling and we’re gonna go ahead and go all the way around making our entire checkerboard pattern once you have completed your walling and everything matches up nicely we’re gonna take out our dark gray stained clay and go all the way around the lip of this as Well next we’re going to go ahead and do is make our props for our storage room now inside the storage room it shows usually like shelvings with alcohol and things like that so what I did was right here where the dooring is supposed to go we’re gonna put a Oakwood staircase like that Another open staircase just like that and put a half slab in the middle next what you gonna do is take out some item frames and stick to item frames like this and then we’re gonna put another set of Oakwood stairs right here two slabs I mean one slab and another piece Of oak wood like that and then what I did was I put another item frame up here as well and then we’re going to stick a brewing stand in just like that then on this side were pretty much gonna do the exact same thing we did over here just Take out your stairs go like this one two put a slab in the middle go ahead and put a brewing stand right here with two item frames then we’re gonna go and put another staircase like this and like this with another slab in the middle and stick three item frames up here just Like that now once you got all your item frames in what I like to do is just go inside my potion stand my potion area and just grab a bunch of random potions it really doesn’t matter to grab a few random ones and then just stick them in Here so it gives the illusion that you have like alcohol or things like that on the shelves for the five nights at freddys little storage area next what we’re gonna do is the mop bucket and the broom so what all I did for the broom Was I came one block away put a piece of brown stain clay and 2 fencepost like that for the broom and then for the mop bucket I just put down a cauldron with some water and then I put down a 2 fencepost like that for our mop bucket Next what we have to do is put in our camera so what I did for my camera was I came over here and I put a piece of iron bar like that and then put it upside down another axe slab like that for my camera obviously you could set up your Camera whichever way you want but for the camera on five nights at freddys it’s facing towards the mop bucket and the broom and it’s also facing towards this little alcohol rack or whatever you can call it next we’re gonna do is just come right out here and we’re gonna put A black stain clay right up here like this and then what you gonna do is take a door and just put it right here and then you guys go you got the entire storage room done so now we have the storage room done the two hallways and We have the control room it completed alright guys so for the next room we’re going to tackle is the dining room this one’s going to be a third one by eighteen spacing don’t worry about the little tiny corners like where the green lines are on the red lines are We’re just gonna worry about this big middle room now obviously we’re gonna have to do a lot of checkerboard patterns for this room so to start off your checkerboard pattern is very easy you know just start off from right here we can put a white stain clay like that Let’s keep our black stain clay and our whites and clay right next to each other we’re gonna make sure it lines up perfectly with that but it should guys if yours is not lined up perfectly then you must have did something wrong but I see it lines up perfectly with that side Making our checkerboard pattern we’re just going to fill in this entire thirty-one by eighteen spacing right here alright guys so no one hurts your eyes a lot but there you guys go there is the entire flooring done so once you got your entire flooring in so obviously You probably had to pause the video there to do it we’re gonna go ahead and go around the entire lip with our light gray stained clay again of course do not interact with any parts of this do not interact with these parts so right here At the left hand corner if you want to just skip three blocks one two three and then on the fourth block go ahead and start up you’re a little light gray st. clay again and on this side the same thing so one two three four five six seven eight nine and then Right at the ninth one it’s easy to remember where this one is because it’s gonna be lined up exactly with that wall right there see how it’s perfectly lined up with this wall so just keep that in mind those two are perfectly lined up with one another then from here you can Go ahead and skip 1 2 3 4 5 6 7 8 9 10 11 12 13 blocks and then on the 14th one which should line up with that we’ll see how it’s lined up perfectly with this wall go ahead and start up your gray stained clay again and just go all the Way around the sides of your 31 by 19 spacing skip these three blocks put light grain stain clay skip these three blocks and put like gray stand clear skip these two blocks and put like grey stained clay like that next what I want you to do is take out your dark grey Stained clay I normally don’t do this we’re gonna go around the entire border that we just did with our light grates with our white grey stained clay with our dark grey stained clay obviously we have to skip the areas that are green make sure you skip those areas that are Green because those are going to be in the open position so right here we’re gonna skip this part I’m gonna come over here and just come with three blocks one two two and three delete these two and then go around the entire lip once more So there we go and bring it all the way down member to skip the green part at Foxy’s Cove as well so right here we’re gonna skip this part and go up three one two three delete these two and bring this all the way around like that beautiful and then You can also put it in right here as well next we’re gonna do is our checkerboard pattern so let’s just fill in this area real quick so you know just skip a block there put some right here right here and right here and then go ahead and fill this in with white stain Clay one two three four and five so now this whole areas in and now we have to do is bring our checkerboard pattern all the way around making sure not to mess with these parts right here alright guys we’re gonna start up from this left hand Side over here and work our way around like that so to make sure we put these doors in perfectly all we’re going to do is just do the same pattern all the way around so black stain clay white black white all the way around like this and Then when you get to a part with a door all you have to do is just follow the top area right here so black white like that and then black white just to follow that whole area around we’re gonna do the same thing here black why not right Here where this door is going towards our bathrooms there’s going to be no checker pattern whatsoever however we do need to keep it going perfectly so all I did was I just went black white black as you see it lines up perfectly there then we’re just gonna delete these three Blocks like that and just keep our checkered pattern going all the way around just just keep doing the same thing over and over don’t mess up like I just did there just keep going all the way around then we’re to do the same thing when we get over here it’s gonna Go black white black white just so we can make sure we line it perfectly delete these three blocks and then do our checker pattern once more all the way down to over here like that now what I did was instead of going all the way down there with another line we’re just Gonna swing our way over here and fill it in this area as well so now we’re gonna go what you know just do the checker pattern once more again that’s pretty much how this whole pill coats is just one big checkered pattern and then right here to keep this going perfectly We’re gonna go another checker pattern like this all the way down delete these three blocks and then keep going with our checker pattern and then right at this door we’re gonna just put another block like that and just keep going with our nice little pattern so now that we got all our Flooring Center rolling and we could go ahead and do our seedings which is gonna be our little props for our dining room area well it’s going to be it’s just tables and chairs so to start that off what I do is I come over here to this little middle area see this little Middle area right here and we’re gonna count in three blocks one two three like that and then we’re to count down two blocks one two and we’re gonna put a fence post just like that then we’re gonna skip two blocks one two and put another fence post like that so it Should look something like this and now we’re gonna make a three by five area of fence post so right here we’re gonna skip about five blocks so one two three four five I’m gonna put another fence post right there and then just put another one like that next we’re gonna Do is take out black carpet and white carpet black carpet and white carpet and just fill it in right over the top so black goes on top of black and white goes on top of white now I know the colors look a little bit different but don’t worry you won’t really notice Those at the end so next we’re gonna do is put some white stick white carpet right above our area to make our tablecloth for our table like that and that’s what we’re going to do is our chair so come right over here down here next to this fence post and just delete This block and we’re gonna put an ender portal frame in here or we can go ahead and put in a Chapman table in there so I’m gonna use my end portals I’m gonna put one there there and there just like that and do the same thing on this side One two three just like that then off each side of the end of portal frames we’re gonna take out spruce wood stairs and I’m gonna put one here here and here just like that and do the same thing on this side one two three just like that Next we’re going to do is put blocks on top of all of our ender portal frames just like this and then on top of all the blocks we’re gonna go ahead and put powered rails or any rail will do it doesn’t really matter and then put my carts on top of All of our rails once you got those all in now we just have to delete these blocks and let our minecarts fall in place there we go so now none of the minecarts can no longer move once you got your bike carts in place we’re gonna Take out our pistons and we’re gonna put a piston right behind each individual staircase like this facing towards our minecarts once you’ve got them in place just put down a redstone block or that could send power to him and push our seedings in to place so now if we Want to we can now sit down at the table and we’re gonna do the same thing on this side so put your three pistons right behind your stairs like this and then put a redstone block in between them to activate the stairs and put them Into place so now we could sit down at all these seedings as well next we’re gonna do the other two seatings and then we’re just gonna double them up so what don’t you do is come to either side it doesn’t really matter so I’m gonna go over here to the right-hand side I’m Just gonna count out one block from here so one and then count down two blocks one two and put a fence post right here and we’re gonna do the same thing we did over here we’re gonna make a three by five spacing of fence post you can Easily just match it up with that one right over here just like that I’m gonna do the same thing we did over there you know put down white carpet and then put down your black carpet and then go ahead and put your tablecloth over your table once you’ve gotten your tablecloth in we Could go ahead and put our end portal frames in so just delete Spock and put an N portal frame and portal frame and portal frame same thing here and portal and portal and portal then take out your chairs spruce spruce spruce spruce spruce spruce now we have to do is just Put our minecarts over our end portal frame so just put a block above each one with a minecart on top of it like so then we’re gonna put our my cards on top of the powered rails and then next what we have to do is just delete all the Blocks again now what you do is just put our pistons in and then we have to send power to our Pistons by going like this and then delete all our pistons and our blocks and do the same thing on this side as well so there you guys go now we Have two tables in and we’re gonna do one more table and then we’re just gonna double them up over here so we’re gonna come over to this side we’re gonna count over one block like we did on the other side so over one and then down to one Two I’m going to put a fence post right here and then just make a five by three area fence post so 1 2 3 1 2 3 4 5 you can easily just level it up with that one over there and then just do your entire thing once more I don’t need to Tell you really what to do anymore and there you guys have know you have all three tables done now all you have to do is just double up these tables now to double up the tables just take out your fence post and we’re just gonna skip 1 Block 1 and put a fence post here and here and literally make a 5 by 3 spacing again one two three one two three four five like that and that’s where ANOVA tables gonna be going skip one block put fence posts here here one two three four five And then we’re gonna put another table there and then right here we’re gonna put one more table as well so one one two three and then one two three four five and another table is going to be going right there alright guys and that is the end of part one there’s going to Be a little thing popping up on the screen right now to lead in the part two and I’ll catch you guys there all right guys push Video Information
This video, titled ‘How To Build Five Nights at Freddy’s Map in Minecraft – Part 1 (Fnaf 1 Map)’, was uploaded by Fed X Gaming on 2015-05-20 18:41:38. It has garnered 5016069 views and 51357 likes. The duration of the video is 00:29:56 or 1796 seconds.
In this Minecraft tutorial, I’ll show you how to build the “Five Nights at Freddy’s 1 Map” This is part one of a two-parter. Make sure to leave a like if you enjoyed the video =]At 19:01 the dimensions for the eating area is 31 by 19 (NOT 31 by 18) I made a mistake :3
Gravel door: https://www.youtube.com/watch?v=wzZRpDcTpjk
Download: https://www.mediafire.com/?9vi9gebz9ex78pe
Part 2: https://www.youtube.com/watch?v=qy2otCKCY64&feature=youtu.be
How to build FNAF 2 Map: https://www.youtube.com/watch?v=TyOltyoaK3k
-Twitter:https://twitter.com/FedEx2692
Music used Electricdoodle Kevin MacLeod (incompetech.com) Super Friendly Kevin MacLeod (incompetech.com) Wallpaper Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
