Minecraft: 8 Town Building/Structure Designs (Tutorial)

G’day everyone and welcome to another minecraft  build tutorial in this one i’ll show you how to   create eight different builds for a town center  and these of course can be used elsewhere but   they’re primarily made to be built in the  center of a town now let’s get on to the  

Showcase for each design for the first one  we have a simple gazebo design which can also   easily be repurposed into a well which is what the  second design is all that’s different between the   two designs is we’ve added in a little thing up  here with some water inside of this cauldron and  

Also a big hole in the ground here with some  water down below onto the third design we have   a man-made little pond thing with a nice little  roof section in the center next up is a big stone  

Fountain design that really suits a royal city  town pretty well and it’s also great for adding   to courtyards of castles and stuff like that the  fifth design is a massive custom tree with a nice   little barrier containing it this tree looks  really hard to bake but it is actually quite  

The opposite using my patent-pending special tree  techniques you’ll be able to build one of these   extremely easily for the next one we have a small  and simple marketplace design which is mainly   meant to be expanded to fit your needs the idea  would be to just repeat the stall designs along  

The path as much as you need then for the second  last design we have a simple statue with a little   garden surrounding it all on its own little  raised platform thing for the final design and  

The best one in my opinion is a small and simple  medieval themed bell tower it is of course a fully   functional bell tower too so you can ring the bell  and send all your villagers back into their homes  

Alright so with all of the builds done and  showcased i’ll now show you how to create each   one for yourself all right so starting off the  first build let’s go ahead and place in a stone   brick block right here and then three blocks away  from that we’re going to place another one and  

Then directly diagonally across from that we’re  going to place another one and then we’re just   going to repeat this until we get like this kind  of square shape now in between each of these let’s   connect them all up with some stone blocks let’s  just go around and connect each of these sides up  

Like this and then we’re going to also fill in all  of the middle with more stone blocks next in front   of all of the stone here we’re going to place in  three stone slabs and then to the left and right  

We’re going to place some stone brick stairs and  let’s just quickly repeat this on all of the sides all right and while we’re at it we may as  well finish off the pathway and the extra   little decorations so in each of the corners  we’re going to place an oak leaf block and  

Then surround it by spruce science so let’s just  go ahead and repeat this in each of the corners and with that done now we’re going to extend  all of the pathways out you can do this of  

Course as far as you want i’m just going  to go a couple of blocks for the sake of   the video i just don’t want us to go for too  long so on the sides we’re going to extend   it out with stone bricks and then in the  center we’re going to continue the stone

All right now with all the pathways done  let’s actually create the gazebo itself   so let’s head up onto the platform  and in each of these corners here   just one block away from this leaf block  here we’re going to place in our base of  

Our pillars so let’s go ahead and do that in  each corner all right now we’re going to raise   these all up by an additional three blocks  so that they’re four blocks high in total now with that done let’s go ahead and connect  all of them up in between each other like this  

And then we’re also going to add some  sticky out blocks like this on each corner   on each of these sticking out  blocks let’s place on a stone button and then we’re gonna have to pick the side that we  want to be the front and the side that we want to  

Be the side so i’m gonna choose this side here as  the front so the roof is going to go up like this   hopefully that makes sense so in between these  two pillars here let’s place in two spruce fence  

Gates on either side and in the center a spruce  fence with a lantern hanging on the end now we’re   just going to quickly repeat this on the opposite  side so two spruce fence gates spruce fence and  

A lantern now we’re gonna head around to the  sides and in these sides in the corners here   we’re gonna place in some slabs on the top half  of this block and then we’re also going to do  

The same along the middle next we’re gonna have  to grab out some scaffolding and let’s head up   just a little bit and on top of the spruce logs  here we’re going to place some spruce trap doors  

Extend these scaffoldings up a little bit more and  now to continue on the roof we’re going to just   build all the way up to the top in  the middle with some spruce stairs   so just place a strip along like this and then on  the sides underneath here we’re going to place in  

Some upside down stairs and then just continue  this thing going all the way up into the center and then once we get up to the top  middle block here we’re going to   instead of placing more stairs we’re  going to place in some slabs like this  

And then we’re going to extend it  all the way along to the other side now we’re just going to repeat this whole thing  on the opposite side so let’s jump back down   we’re going to place in some slabs along the top  half of these blocks grab out some scaffolding or  

You can use your existing one if you want i’m  lazy so i’m just going to build another one   now heading up let’s place once again some  spruce trap doors on top of these blocks here   and then we’re going to place in some more  stairs just like we did on the other side

And now along the top here we’re actually going  to remove these two blocks and also these two   blocks so we’re just going to leave the end  ones and also the center one and we’re going   to replace these slabs that were here with some  more spruce trap doors and now with that we can  

Head down destroy our scaffoldings and marvel at  our brand new gazebo next onto the well design we   can actually reuse this existing gazebo and  just convert it into a well design and it’s  

Really easy to do all we need to do is dig a  three by three hole in the center here you can   go down as far as you want for the sake of the  video i’ll just be going down a couple of blocks  

Now we’ll also be replacing all of  these dirt blocks with more stone   blocks you can of course do this  if you want to you don’t have to and while we’re down here go ahead and  fill up all of the bottom with some water  

Now using some scaffolding we’re going to go ahead  and bring ourselves all the way back up to the top   and then be sure to remove that bottom scaffolding  as well next up we’re going to create a little  

Thing here that holds the cauldron with the  water bucket in it so preferably do this in line   with your lanterns so we’re going to place two  fence gates on either side like this and then a   spruce fence in the center now hanging below this  we’re gonna place an additional chain and then a  

Cauldron and fill this cauldron up with some water  and now all that’s left to do is to connect up   each of the pillars here with some stone slabs  so just go all the way around and just connect  

Them all up with stone slabs just like that and  then there we go that’s it for your well design   all right on to the next one the pond design this  one is quite a bit larger than the previous one so  

Be sure to get out a bunch of stone bricks stone  and endocyte now you’ll only need the stone and   the ender site if you want to texture the entire  pathway it’s up to you you can of course leave  

It as a solid block so starting off with the  shape what we’re going to do is destroy a line   of seven in the grass so one two three four  five six seven and then we’re gonna replace  

This all with some stone bricks just for now we’re  going to texture it all at the end then on the end   diagonally we’re going to destroy an additional  two blocks and fill those up with more stone  

Bricks and then we’re going to do another line of  seven on this row here so another diagonally block   away if that makes any sense and then we’re  going to extend this seven blocks out so one   two three four five six seven fill all of  these in with some more stone bricks and  

Then we’re just gonna repeat this exact same  thing until we get this kind of circle shape and there we go there’s our completed shape just  like this here’s an aerial view if you’re a little  

Bit confused next what we’re going to go ahead  and do is remove all of the grass inside of this   circle here now with all of that removed we’re  going to add in some additional stone bricks so   in the corners here we’re going to place an  additional stone brick right in between these  

Two and then on these sides here we’re going to  place an additional two stone bricks like this   now let’s go ahead and repeat this in  all of the corners so in this corner   once again an additional stone brick  here and then two more on either side

Now here’s another aerial view if  you’re a little bit confused next   in each of these corner blocks here  we’re going to place an additional two   stone brick slabs just like this so  go ahead and do this in each corner  

And now we’re going to replace all of the dirt in  here with some more stone bricks now with all of   that done let’s go ahead and extend our pathways  out so the pathways are going to be in line with  

These three blocks here so we’re just going to  extend these out i’m just going to go a couple   of blocks for the sake of the video and then just  go ahead and of course repeat this on each side

Now with all of those done let’s go ahead  and texture everything this is of course   optional like i said at the beginning  but for the texture we’re going to be   using stone and also endocyte so just go  ahead and mix these blocks in randomly

And we will of course be doing  this in the middle area as well next let’s go ahead and create the actual pond  pathways that connect up all of these pathways   together and then also all of the water so for  the pathways what we’re going to go ahead and  

Do is grab out some spruce stairs and now  in the center here we’re going to go one   block away from the center and place our first  spruce stairs like this and then we’re going to   extend this all the way until the center right  here we’re going to just go four blocks away  

And then we’re going to repeat this on  the opposite side as well leaving a one   block gap in the middle and then in this  middle part here we’re going to fill it up   with some spruce trap doors now let’s  go ahead and repeat this on each side

Now in each of these corner blocks here where  there’s a gap in between all the stairs we’re   going to place in some stripped spruce wood  blocks and then we can go ahead and connect up   all of these pathways in the center but before we  do that let’s place an additional stripped spruce  

Block like this and then we’re going to place in  some small spruce trap doors all the way along   just like that now in all of these gaps  here we can go ahead and place in some  

Water so we’re going to fill up all of these  stairs with water and also fill up all of the   area in here as well and now let’s just go  ahead and repeat this in all of the corners

Now with all of the water done we can go ahead and  place in our stone brick walls with the lanterns   on top so in the corner blocks here in each corner  we’re going to go ahead and place in some stone  

Brick walls and on top of those some lanterns now  in the center here we’re going to place our little   roofed area so let’s go ahead and on top of all of  these strip spruce blocks we’re going to place in  

Some stone brick walls on top of these let’s place  in some spruce fences now let’s grab out the old   scaffolding and hold shift and place in a couple  of scaffolding blocks like this on top of each of  

The fences let’s go ahead and place a spruce trap  door and then in between all of these trap doors   we’re going to place in some spruce slabs and  then let’s go ahead and place another spruce slab  

Just like this in the center now we can remove  our scaffolding and that’s it we’re all done   with the pond town center next it’s time to create  the fountain so let’s first start off with the   outline of course and we’re going to be texturing  this whole fountain with stone and stone bricks  

Of course it is optional so to start off let’s  place a row of three blocks just like this   and then we’re going to go diagonally away from  this an additional block and then an additional  

Three blocks just like this in a line now this is  the basic shape of the outline of the foundation   so let’s go ahead and repeat this so an additional  corner block here three blocks corner three blocks   you get the picture now we’re actually going  to be replacing these middle blocks here with  

Some upside down stair blocks just go ahead and  place all of these in around each side now in   all of these corners here we’re going to place in  some slabs and now before we get started in the  

Fountain itself let’s go ahead and place in our  pathway and ground texture we’re going to be doing   this with gravel and endocyte so we’re going to  go two blocks away from each side we’re going to   destroy two blocks of grass just like this  all the way around and then jumping off of the  

Fountain over here we’re gonna go an additional  two blocks to the side and then we’re gonna do   the same on this side and then an additional  diagonal block like that hopefully that makes   sense now we’re gonna remove all of this grass  left over on the inside and do this on each side

Now with all of that done let’s go ahead  and also add in our pathway outline so   this pathway is three blocks wide  so we’re gonna go in line with the   fountain these three blocks here we’re  going to just destroy some additional  

Grass blocks just like that go ahead  and of course repeat this on each side now with that done let’s go ahead and fill in  all of the blocks with some andesite and gravel also don’t forget to do these  blocks underneath the stairs as well  

Now it’s time to move on to the actual fountain  itself so inside here on top of all of these grass   blocks we’re going to place in a mixture  of stone brick slabs and also stone slabs

Now let’s go ahead and add in our main central  area for the fountain so what we’re going to do   is replace this center block with a stone brick  block and then we’re going to go up an additional  

Five blocks so let’s go up one i’m also gonna mix  in some stone so two three four and five now on   top of here we’re going to hold shift and place in  some upside down stairs on either side like this  

Also just go ahead and mix in some stone and  stone bricks now on top of the center block here   let’s place a stone brick wall with a lantern  on top now on top of all of these upside down  

Stairs we’re going to place in some more stairs  once again mix in stone and also stone bricks   next let’s go ahead and jump down and add in  our secondary kind of layer of uh fountain-ness  

I don’t really know what to call it so we’re  going to go one and a half blocks up so this   is the half and then one two now on the second  layer here we’re gonna add in some upside down  

Stairs go all the way around and just place in a  bunch of upside down stairs like this and then in   front of all of these stairs we’re gonna place  in a slab and on top of that an additional slab

Next let’s go ahead and place in some water  buckets on all of these slab blocks inside here   now with that done let’s go ahead and grab  our scaffolding and just head all the way back  

Up to the top here and we’re going to fill in some  water inside of the stone brick wall here and also   some water inside of all of these stair blocks and  then jumping down we can destroy our scaffolding  

And now the last thing to do is place in some  lanterns on top of all of these stair blocks   and also we’re going to add in some texture  with some stone and all of these blocks   along here we’re also going to replace some of  these stone brick slabs with some stone slabs  

And there we go that’s it for the fountain town  center design all right and now on to the next   design the big tree first we’re gonna go ahead and  create the outline circle that surrounds the tree  

And to do that we’re gonna be using stone  brick slabs so we’re gonna place in a row   of four just like this and then one block in  we’re gonna go a row of two and then we’re  

Gonna go in again and place another row of  two like this and then another row of four   like this and now we’re just going to repeat  this again to create a full circular shape   there we go so there’s our final shape next  what we’re going to do is grab out some oak  

Leaves and place them in some specific  locations so firstly let’s place one in   each corner in this spot here and then we’re  going to branch it off an additional block   either way and then we’re also going  to place one in these corners as well  

So pretty much just creating a shape like this  and we’re going to repeat this in every corner next up we’re going to place the base of  the tree and to do this we’re going to go  

Into one side on here and then we’re going to  go two blocks away from this so one two and then   we’re going to place the base start of each tree  like this we’re going to do this on every side

Next we’re going to connect all of these up  together by placing an additional log in all   of the gaps in the corners here and now before we  move on to the rest of the tree let’s go ahead and  

Fill in all of this area with some grass allium  cornflour azure blewette and also some tall grass   you can of course choose to put in whatever  you want i just feel like this looks the nicest

All right now with that done let’s go ahead and  add in some more logs so right now we’re just   creating the base shape of the tree we’re going to  go ahead and randomize all of it later on but what  

We’re going to do now is raise up all of these  areas inside here now you should have something   like this and now we’re going to go ahead and do  the exact same thing once again and now for this  

Build i’m going to be flying just to make things  a lot quicker and easier you will of course have   to use scaffolding if you’re in survival next  we’re going to raise up this central tree trunk  

Up an additional eight blocks so that’s one two  three four five six seven eight nine so it’s gonna   be nine in total from this little bottom stump  now let’s go ahead and raise all of the sides up  

Now on top of here let’s add on a bunch  of oak leaves we’re just going to place   in a couple like this and this is going to  be the top of the tree here and now what we   need to go ahead and do is create some  branches that go off in all directions  

So to do that what i like to do is grab some  oak wood and just create these kind of shapes   just branching off either side go ahead and  add some of these lower and higher up as well  

Add some shorter ones and some longer ones  try and randomize it as much as you can so now with the shape kind of looking like this  just with random branches sticking out in all   directions what we’re going to do is go ahead and  add some leaves onto every exposed block we’re  

Going to place leaves on every like exposed face  that you see just go ahead and add on a lift block and there we go now with all of those branches  covered your tree should be looking like this it  

Of course does still look pretty weird up here  so we’re gonna go ahead and fix that right now   so what we’re going to do is add in some extra  little branches make sure these aren’t too long  

Because we don’t want this to be like kind  of a jargled mess up here full of leaves   let’s go ahead and just add in some extra  branches on these sides where we need it   and also just continue doing our same thing just  placing oak leaves on all of the exposed faces

Now with that done it’s looking a little bit  better let’s go ahead and just take out some   of the leaves on the top here and also add in  some random leaves in random places don’t be   afraid to just add in extra leaves wherever  you think you need them so now with that our  

Tree is looking pretty good except for of course  the stump and we’ll get to that in a minute but   this is a really great way to create some custom  trees really easily all you need to do is just  

Create branches and place leaves on every exposed  block i think in the original tree the branches   were kind of drooping down more like a weeping  willow tree and this one’s kind of sticking up  

So it’s a bit of a different one but if you want  to create one more like in the original image   go ahead and just make your branches arch upwards  and then down so i feel like we need a couple more  

Extra tiny little branches down below here so  let’s go ahead and just add in just a couple   and of course add on some leaves as well  i don’t want these to be as bushy so we   might leave the bottom ones open like this and  also some blocks just kind of missing like that

And there we go i’m happy with that tree  now let’s go ahead and fix up the stump area   and to do that what we’re going to do  is just replace some random blocks with   spruce stairs and also spruce slabs take  out some chunks add in some chunks and  

Just yeah just pretty much just try  and keep it as random as possible we can also go ahead and add in some up here  as well and make this trunk kind of hollow   looking and there we go there’s our custom tree  town center design all right next up it’s on to  

The marketplace design so what we’re going to  do is remove four blocks of grass like this in   a square and we’re gonna replace it all with some  stone bricks and then we’re gonna extend these out  

In each direction by seven blocks so one two three  four five six seven and then we’re also gonna   bring it back this way and then let’s go ahead  and just remove this same amount in each direction

Now with all of those done let’s go ahead and  place some stone bricks in their place we will   also be texturing these stone bricks with some  cracked stone bricks that is of course optional all right so now let’s go ahead and add in our  texture just some cracked stone bricks don’t add  

Too many in as it kind of makes it look a bit  weird so just keep the texturing pretty light   next it’s time to create the actual ground  that the market stalls are going to be   situated on and to do that we’re going to  be making a circular shape in between all  

Of these paths so to create the shape  let’s first remove three grass blocks   to the right of this pathway here and then  we’re going to go in one block and remove   two and then we’re going to repeat this exact  same thing on this side so one two three blocks  

And then two and then there we go that’s our shape  now let’s go ahead and repeat this in each corner and now also let’s go ahead and remove all of  the grass all the way inside of this whole circle  

And now with all of that removed let’s go  ahead and place in our stone andesite and   also gravel this is of course going  to be just a fully textured pathway   it looks really nice doing it this way so  i would strongly recommend texturing this

And there we go there’s our entire marketplace  kind of center created here’s a final overview   and so now with all of that done let’s go ahead  and add in our actual marketplace stands so for   the first one what we’re going to do is grab  out some strip spruce wood we’re going to head  

Over into this corner here and then one block  away from the corner let’s place in our first   block and then we’re going to extend this down  this way by three more blocks so it’s four  

Long in total then on top of the end ones we’re  going to place on some spruce fences and then also   on the back side one block away we’re gonna place  in two spruce fences just like this in each corner  

Now in between these two blocks here on each  side we’re going to place in some spruce fence   gates now we’re gonna have to grab out some  scaffolding so just place in a couple at the front  

Here and we’re gonna add on the roof so for the  trim let’s first place on some spruce stairs on   these two fence blocks and then we’re gonna do the  same on these fences as well now in between these  

Let’s add in a slab and then another slab on top  like that to create this shape and then in between   these stairs we’ll also add in some more slabs and  now on these blocks here in the middle we’re going  

To place on some white wool and also some yellow  wool now we can destroy our scaffolding and head   back down and now all that’s left to do for this  marker stall is place on the decorations and for  

This one we’re going with a lantern and a couple  of candles i’m thinking that this market store   is going to be selling kind of lights and stuff  like that feel free to of course change all of  

These market stores to hold whatever you want and  now on the opposite side of this we’re going to   repeat the exact same design so just pretty  much mirror this exact design on this side now this time on this one we’re going to  be putting a large amethyst bud and also a  

Brewing stand this one’s kind of a brewing  slash enchanting stall i don’t know and we   also for this one we instead of using some  yellow wool we use some blue wool all right   now with these two done let’s head over into the  back right corner and add in our biggest stall  

So let’s first start it off by placing some  strip spruce wood in this corner block here   and then coming away from it we’re going to add  in three upside down spruce stairs and then an   additional strip spruce wood block just like  that now on top of these two stripped spruce  

Wood blocks let’s place in two fences and  then we’re gonna add in some more fences on   this back side here so spaced apart three blocks  one two three and on the fourth block we’re going  

To add in three fences and then let’s do the  same over on this side as well now let’s grab   out the old scaffolding and create the trim for  the roof so let’s place in a couple of blocks here  

Now on top of this fence here we’re going to place  in two slabs and we’re also going to do the same   on this side and then we’re going to connect them  up with some more slabs in between now let’s bring  

Our scaffolding over this way and let’s add in  some more slabs so we’re going to place one coming   off of this block here and then we’re going to  place in an additional four or four in total  

Sorry so one two three and four keep bringing  our scaffolding a bit more over and also up   and now up here we’re going to add in one coming  off of this one and another one here and then an  

Additional two above it to create this shape sorry  if it’s kind of confusing here’s an overview so   it’s pretty much a full block and then slab full  block slab and then slab full block slab and now  

Let’s just quickly go ahead and repeat this on  the opposite side and also on the back as well all right now it’s time to add in the actual  main roof which is going to be made out of  

Wool of course so for this first ring on  the back here let’s place in some white   wool just in this shape so it’s two and  then one in the center and then another   two and then coming away from this one we’re going  to add in some green wool and then another ring  

Of white wool just like that and that’s the roof  all done easy peasy now it’s time to add in all of   our decorations so let’s head over into the back  in between these two fences and let’s first add  

In a barrel next to that a smithing table and  then a strip spruce wood block just like that   and then in line with these three one block spaced  away so on this layer here we’re going to add in  

An anvil a cauldron with some water inside and  then another barrel just like this on the end   now on this front desk here we’re going to add  a lantern on the leftmost stair block and then  

On the rightmost stair block let’s place an item  frame with an iron sword inside and now let’s grab   an armor stand and head over to this block here  just one block away from the fence and we’re going  

To place an angled armor stand and on this let’s  chuck on an iron helmet flying chest plate leather   pants and leather boots you can of course put  whatever armor you want on there it doesn’t really  

Matter and now that’s it for our big market stall  now let’s head over into the final section so this   one’s the easiest out of all of them as we don’t  have to make a roof thankfully but once again  

We’re going to place a stripped spruce wood block  in this corner here and then we’re going to add in   two spruce slabs and then another strip spruce  wood block on the end now we’re going to repeat  

This same thing one block away so place another  strip spruce block but this time just one spruce   slab and then another strip spruce block and now  at the ends of these let’s place a chest at the  

End of the long one and then a barrel on the end  of the shorter one and now finally let’s finish up   by placing some flower pots so we’re gonna place  three on this section here and then on the other  

One we’re gonna place two on these two blocks  now in this first part here let’s place an oxide   daisy and then on this left one a white tulip  on the back ones let’s place in a blue orchid  

And then finally a cornflower and then there we  go that’s it for our marketplace design this is   of course pretty small but it’s meant to be kind  of expanded so as long as your pathways keep going  

This way you can extend the stone gravel and  underside as far as you want and add in more   market stands there’s three different versions  for you to repeat across how big of an area you   need so yeah all right next up we have a little  statue design which is actually pretty cute and  

It has a little garden around it as well so let’s  first create the base for the statue and this is   going to be three wide and four long so one two  three four and now let’s just fill all of this in  

Now let’s surround all of the exposed grass  faces here with some spruce trap doors now it’s time to grab out the scaffolding you  will be needing a bunch of scaffolding to build   this guy all right so first let’s create the legs  which is just four blocks and to do this we’re  

Going to be using a mixture of stone stone bricks  cracked stone bricks and also more stone i guess   and then we’re going to be using this same texture  for the arms but for the body we’ll be using  

Polished andesite and also stone bricks just  to try and keep them looking a little bit more   separated so let’s place three polished and side  blocks like this and then we’re gonna place some   stone bricks like this and then let’s just suck  another polished endocyte block there so the  

Legs were too high the body is now three high  now let’s bring our scaffolding over this way   and for the top of the arm here we’re going to  connect it to the top of the body of course and  

Let’s do this one with some stone brick stairs  coming off like that and then down below this   let’s place in some stone bricks and some more  stone now heading on to the other side do the same  

Thing some more stone brick stairs and then some  stone and some stone bricks now for the head let’s   extend our scaffolding up a little bit higher and  then for the head we’re going to be using stone   bricks and just stone so let’s place some stone  bricks here and there’s some stone beside that  

Now coming off of this let’s place some stone  brick stairs and then some more stone stairs and   then let’s play some more stairs above these  so we’re going to alternate it so above the   stone stairs some stone brick stairs and then  you get the point now let’s do the same thing  

On the back so stone bricks and then stone and  there we go that’s it for the statue now let’s   head down and add in all of our flowers all  right so to get a nice placement of all of  

The flowers let’s first go in and actually  add some grass we’re going to place these   in these two corners and then over this side right  next to the statue now to the left of this first  

Piece of grass here let’s place in a blue orchid  and then we’re going to place a cornflower and   an allium and then heading over this side let’s  place a cornflower a blue orchid and then another  

Allium like that and in between these let’s place  in a cornflower and there we go that’s it for our   small statue design all right and now it’s time to  head on to the final design the small bell tower  

So let’s first start off by creating the shape  for the base which is just a three by three square   just like this now let’s go ahead and raise up  each corner by an additional seven blocks so  

One two three four five six seven now let’s  go ahead and just repeat this in each corner now let’s go ahead and connect all of these up  at the top here and jump down and we’ll continue  

On with the top later on but for now let’s just  work on the bottom portion so next let’s go ahead   and add in some upside down stone brick stairs  we’re going to leave a two block gap in between  

All of these this is where we’re going to be  adding in our doors then above this let’s add   in a full block and then above this all the  way at the top let’s add in an upside down  

Stair block again to create this shape now let’s  go ahead and quickly repeat this on each side now with that done let’s go ahead and add  in some stone blocks in front of each of the  

Corners here all the way around on each side  and then in between all of these let’s add in   some stone brick slabs now above each of these  stone blocks here let’s add in a stone brick   wall and then a spruce fence and of course  just go ahead and repeat this on each one

Now on each side we’re going to add in  a little roof design so to create this   on top of the left side fence here let’s  add in a spruce stair and then let’s do   the same on the other side and then in  between these let’s place in a spruce  

Slab on the top part here and then add  in another one below it just like that   to create this shape now let’s quickly  go ahead and repeat this on each side now with that done let’s go ahead and also add  in our doors so just head inside here and then  

Just go ahead and place in all of your doors  like that if you don’t want doors on each side   you can replace these with instead some stone  brick stairs just like this and then you can  

Put a fence in here to create a window just  like that but because this is a town center   we’re gonna have paths leading to each section  so we’re going to have doors in each section   now it’s time to crack out the scaffolding  and we’re going to head back up to the top  

And create the top portion but just before we  go all the way up to the top let’s instead stop   right here we’re going to chuck a stone brick  block in between all of these stair blocks here  

And then underneath this block here let’s  add in our bell so all of this is going to   be made out of stone for now and we also will be  texturing all of the stone with some andesite and  

Then all of the stone bricks with some cracked  stone bricks but we’ll get to that at the end   so on each corner let’s add in a stone stair  block and we’re going to do this on each side  

So we’re going to have to probably create quite  a few scaffolding pillars all the way around now with that done let’s go ahead  and place a spruce fence gate in   between each of these stone stairs on each side  

And now let’s extend our scaffolding up a little  bit higher just so we can get all the way up here   and now on top of each of these stairs we’re going  to place in a stone block and then in between all  

Of these a stone slab just above this bruce fence  gate and now up here we’re going to fill in this   block and place an additional block and then on  top of this block here let’s chuck on a lantern  

And now that’s it for the entire bell tower all  that’s left to do now is add in our texture this   is of course optional like with everything else  in this video so let’s first go ahead and texture  

All of the stone and to do this we will be using  endocyte so just chuck in some andesite be sure   to replace some of the stairs as well and even  some of the slabs too with some endocyte ones

And there we go i’m pretty happy with that so  now let’s head down and add in some endocyte onto   these stone blocks down here as well and now  with that all that’s left to do is add in some  

Cracked stone bricks onto all of the sides so we  can go ahead and remove all of our scaffolding   because we should be able to reach all of the  stone bricks except for the ones up there but  

Oh well now let’s just go ahead and add in some  light texture using these cracked stone bricks   don’t add too much or it will start to look a  little bit strange so just a couple of blocks  

Maybe like five or six in total and that’s it  for the bell tower itself now all that’s left   to do is add in our pathways now because  this bell tower is made out of stone it  

Suits a dirt path better instead of a gravelly  kind of stone path as it all kind of blends in   so i’m going to be using a dirt path for this  so let’s first add in some pathway blocks

And now let’s just fill in all of the gaps and  all around here as well with some coarse dirt   and also some rooted can of course leave this  grass if you wanted to it is entirely up to you

And there we go there’s our completed bell tower  design and well that’s it for the town center   designs if you enjoyed this video be sure to leave  a like and also subscribe with notifications on to   be notified of future uploads cheers for watching  everyone and i’ll see you in the next video