Hello there and welcome to 80 craft it’s halloween season and i have a fantastic part one of this adam’s family house build from the movies for you so don’t go anywhere before we get going take a second to hit that like button and make sure that you’re subscribed to the Channel as it really really does help these are the materials you’ll need for the build and this includes all of the internal walls floors and staircases this is the floor plan for the build start by laying this out on top of your surface where you’re going to be Building this with a line of stone bricks and then fill with whatever you want the floor to be i’m going to be using tough with the walls in place and your chosen floor in what we’re going to do now is we’re going to replace some of the Blocks to show where the windows are going to be now i’ve used some purple blue and light blue wool here to make it easier to see but anywhere where we see the purple wool those are going to be polished and the site blocks anywhere where we see the blue wall which is Basically on some of the corners we are going to be using just a regular underside and that light blue section at the front is just going to be using some stone brick because that’s the entrance way so fill those blocks in and we will go through and start building up the Walls with the markers in place around the build now we are going to start building up a framework and this is going to show us what the overall shape of the house is going to end up being and there are two heights that we’re going to be building these andersite blocks up to Some of them are going to go up to 12 high which is the uh the two-story height and some of them are going to go up to six which is only a single story height so i’ll go through the ones that go up to six and that is this one at the Front so we’ve got three four five and six so that’ll be the total height of this this one here as well next to that so these are just on the right hand side of this entrance the one at the back here this back not on the corner but the one that’s just to The left of that so that i’ll come up to a total of six as well and the last two that’ll come out to a total of six are this very back one and the back one here as well so these all come up to a total of six All the other undecide blocks not the polished ones just the regular andesite blocks so the ones we’ve got here here and the ones along the front and down that side are all then going to come up to a height of 12 and that’s 12 including this block with the pillars in Place it will look like this and now we’re going to start on the conservatory because it’s slightly different to the rest of the build so we’ll get this over and done with and the first thing we’re going to do is take each of these polished antelope blocks and take them Up to a total of six blocks high so we’ll do that right the way around on all of these pillars on the edge just like so and once we’ve done that we’re going to connect up along the top as well which is going to leave us a Four by two hole in the sides all the way around to that pillar at the back there now we’re going to fill these in with some light gray stained glass blocks and these are blocks that i’m using that are using the wbc builds texture pack which i will link in the description Which has got a nice rim around these blocks and is designed specifically for builds from this era hence why i’m using it now but it will look equally good in vanilla once it’s done it’ll look like this and now we’re going to build the interior wall for this as well so in This corner at the front of the build we’re just going to fill this up with some stone brick like so and then next to that we’re going to have a line of anger site coming up here we’re going to leave two gaps a line of underside Coming up here leave one gap a line of van der site coming up leave one gap and then we’re gonna have two and a sight and this is the polish downside coming up here like this in here we’re then in between these two gonna split the Difference a gap a line coming up like this and then connect everything up at the top level we’re going to take some slabs and then leave one gap and place the slabs here and on this other one this little one leave a gap and place the slabs here and Fill everything else in with the anderson walls just for a bit of depth in here like so and then that’s the interior then the shape of your conservatory done adding a ceiling and a roof on this first thing we’re going to do is we’re going to take A whole bunch of smithing tables and we’re going to run those in a line round the edge of this and that is so we get this lovely bottom texture of the swifting table actually inside the conservatory and that works as a lovely roof so we’ll run these all the way Around the inside and then using some tough blocks we’re going to shift click into those and then we’ll shift click in so we don’t open the ui and that is going to give us another layer that’s going to come around like this and above that we’re going to have Another set of these crafting tables not these crafting these smithing tables rather they’re in the roof we’re going to then take some cobble deep slate and we’re going to run cobble deep slate right away from here on the edge of the build across to the very edge on this side as well Now that the roof’s on we’re going to add the detailing to the conservatory and that’s going to start by placing one two three four of the andesite here with two of the polished underside on top just like this on each of these corners one at the front and one of the back of The conservatory like so those are going to be the edges and we’re going to build up the same pattern for each of these windows so i’ll just show you on this side you repeat this right the way around the build first thing we’re going to do is place Ourselves two of these stone brick walls either side in the middle here underneath this glass then we’re going to go one two three four of the andesite walls going up the sides like that now we’re gonna add ourselves some of these stairs and this can be a little Bit tricky so we place the stairs facing this way on the top of the window and then facing the other way On the other side now on top of that we’re going to go the opposite way with the stair so we’ve got one stair facing this way again there we go and then the same on this side here so we’ve got a stair and then stair facing Out of it so those are upside down stairs then we’ve got a polished that on a chisel brother which is a stone block here with a polished and a site on top like that and that is the detailing for the windows then we’ve just got a little bit of Cornicing on top and that is going to have upside down stair on each of these pillars so it’s going to be a pillar like that all the way along and anywhere in between you’ve got these nice slabs that are going around including on the corners here so this would then carry on With an upside down stair on each of these like this with the slabs in between so continue that all the way around and get on to the main build moving to this bay on the right of the doorway now first thing we’re going to do is we’re Going to add some stone bricks so again just on the inside we’re going to add two lines of stone bricks up to and level with this andersite then on this side we’re going to miss this corner here we’re going to add them up one beneath and the same on this side Just one beneath again missing these two blocks i’m going to take out these endocyte now and we’re actually going to use some black stone that’s going to come right the way across just like this in the middle we’ll take some polished underside and run that up like this and Then some light gray stained glass panes are going to go on the interior for the window we’re going to have an andesite slab here at the top and then five running across the bottom we’re gonna place ourselves one stair going the right way up here and then Once they’re sticking out on either side and the last thing on this stage is to put some underside walls running up connecting those to give us some lovely window detail moving up now we’re going to start building across from this so we’re going to place a stone brick here and then three coming Out like this then we’re going to place the andesite in either side like this with one more stone brick in the middle now on the outside of this we’re going to place ourselves an andesite here and here and we’ll deal with those later and then above that we’re going to go one two Three then in the middle one two three and one two three here next we’re going to take some more of the stone bricks we’re going to build this up level first of all and then we are going to bring this up to the top on all of these And then just fill in one extra block over the top like so and that’ll leave us a full gap which is going to be the windows which will put the light grey stained glass panes in two three four like so here we’re gonna have some slabs coming across in the middle section And then we’re gonna do the tops exactly the same as we’ve done it here so we’ve got the different stairs going those different directions like so with a slab this is the polished underside slab in the middle and then some walls running up the sides to give us again the lovely window Decoration and that gives us all of the detail around the windows next the last thing to do is to add some trapdoors and now again these are something that has been slightly changed in the wbc texture pack they’re simply filled in basically it’s exactly the same color but they don’t have the holes In i’m going to run a line across here and then have some that are flapped up covering this section just like so now we’re going to deal with the central tower and the belt and the first thing we’re going to do is we’re going to come here in between these two and side Pillars and place a door which is level with the pillars now we’re going to go inside and we’re going to start placing some trapdoors and what we’re going to do is place three on this side and on this side and then two on top of the Door i’m gonna make sure those are all closed when that’s done we’re gonna take our stone bricks and we’re gonna build up all the way level to the top on this side so it matches up with the other side of the door and we’re also gonna do The same on the two sides in front so we’re going to build all of those right the way up with those done we’re going to bring ourselves up some of the andesite walls and we’re going to go one two three four on both sides of this doorway Then we are going to place on top a chiseled stone brick like this in between the chiseled stone bricks we’re going to add some andesite going across and we’re going to bring this underside right the way up to the top of the build on both sides as well We’ll run three stone brick walls up either side of this doorway with a chiseled stone block on top and a polished andesite slab in the middle like this and then here moving up to this section we’re going to place a polished underside because that’s going To be the middle of the uh the window we’re going to have stone brick either side and then we’re going to go one two three much similar to what we did over there and three on this side as well and then we’re going to go up a further Block with the stone brick and then come across with the stone bricks at the top like so now as we did before we’ll put the glass panes in and then underneath we’ve got three of the polished underside here and one at the top three of the andesite walls either side And then finish that off with two stairs facing into that and that is the pattern that we use for all single windows now on the left of the front door we are going to build up a line of the stone bricks going right the way up to the top against this underside pillar We’re going to have another one in the middle directly through here like this and that’s going to go up there and then in either one of these we are going to place a window exactly like we’ve done here so i’ll show you one of them uh which is going to be Four of the polish three of the polished underside rather with a stone brick on top and then a little stone brick coming across like this that gives you space for the window which goes in the middle at the bottom we have three of the polished underside slabs three walls on each side And then we have the andesite slab in here and then a stair on either side of that so make sure it’s a bit tricky so yeah do that on both of those then what we’re going to do is we’re going to have another window level with this so once We build that on top there’s going to be another window which is built in exactly the same way one here and then i’ll just temporary block one here on this side so you’ll have four windows in this space and that’ll bring you right the way up To the top of the roof for this edge tower it’s as simple as adding in two windows in the gaps that we’ve got here exactly the same so we have done the other ones so the first one comes up and over at this point and then the next one is directly above It and that takes you up again to the roof moving around to the left we are going to start filling in two lines of stone bricks against here and here right the way up to the roof again just like so and then as we did on this side we’re Gonna put two sets of windows going up here in this space here we’re gonna build a double window exactly like we did just over here so with all of the details such as the stair in that space um and just connect it up so that is going to be just here With the underside in between like this and on either side then we’ve got a single window that’s going to be coming into this space just there and in between we’re just going to run a line of the the stone bricks up and bring that up Level at the top which then takes us to the point of this and the site just here so put those two window designs in place and then we will start working on this top section next we’re going to make a slight adjustment to what we’ve got here So where we’ve got this pillar we’re going to start a new pillar from the ground and that’s going to come up to the same level as this we’re then going to take this pillar down to this level because what we’re going to do is actually build a little balcony Coming around here and equally because we’re going to have another little balcony here we’ll take this down to the ground and we’ll build this right the way up to the top just like so so how this is going to work is in this section we are going to build ourselves A window as we would have done normally like that exactly the same as the one beneath and the one next to it in this section here we’re going to fill in this gap that we’ve now created there with just some stone bricks and then across here we’re gonna start building ourselves The platform inwards and you’ll need a temporary block to just bring yourself in here with two more windows so we’ll get the polished underside blocks will just be here and here and then as we have done beneath that exact same window design will go uh so we’ll go one two three Three if i can place in the right place three here three here and then build up the side and over the top with our stone bricks up to this point so we can then just fill it in so yeah put your new window in there and then we will Start working on some of the details for the balcony before the balcony we’re going to finish this back section here so the first thing we’re going to do is we’re going to come up five blocks here and then we’re also going to do the same on these three blocks here and that will Bring us in line with the top along there what we’re then going to do is have two of these individual windows just like this design right next to each other in each of these two spaces and that will then bring us up in line with this ready for us to build this Next section with those done it will connect up like this uh so the two walls will connect and you’ll have the two windows side by side now we’re gonna have to build in a little bit to connect up to this wall so firstly we’re going to place two of these stone bricks here And then we’re going to place a stone brick on top now these two at the bottom are temporary blocks but actually you can’t see them in the interior of the build so you can just leave them in there now we’re going to connect these across so we’re going to place a stone brick And a polished andesite because that’s where one window is going to go and then we’re going to do the same while the mirror on the other side like this that will then be a case of just connecting these up like this and then we’re going to place three of The full polished underside blocks in there just like this and that’s to tie in with what is going to be the balcony that goes in front now we just start building these windows up as we would normally so you’re going to have that put that three and three like this All the rest of the space that we have here is simply going to be filled in with some of these stone bricks so just fill everything else in with the stone bricks and then we’ll get to this balcony section finish off these windows as well once you’re there the little bulking section We’re going to start at the end that we’ve just finished at and we’re going to bring some black stone blocks all the way out and around filling in this little gap as well until we get to the edge here we’re also going to place one single blackstone block here And then we’re going to start not on the first block but on the second block placing some bottom slabs coming right the way around the build as well as a little extra section of the roof and that’s going to come around here and then loop around now if you wanted to Change these for full blocks you could but it’s not necessary obviously nothing’s going to spawn in a half block space now once we get here to underneath this balcony we are going to stop and carry on just from the other side for the last four or three of these half slabs Now we’re going to take our warped stairs and we’re going to place some upstairs here and here we’re also going to place one here and then they’re going to be every other block so we’re going to bring them around on this one here we’ll place it that way then one there There right the way around and across until we get to this stage here underneath that we’re going to place then some more of these warp trap doors in the gaps and that just gives us this nice little this nice edging here and we’ll do the last one there the Final thing to do is take one warp slab and place it there in the middle just like so in this back section fill in the sections that don’t have the windows and there’s three windows uh one here one here and one on the left hand side As well fill those in with some stone bricks and what we’re also going to do is build a doorway in this section and the doorway is a little bit different so it’s going to start with three and polished underside blocks and three polished underside stairs in front of it Then we’re gonna have like we have for the windows three going up the side like this and then in the middle we’ve got some upside down underside stairs and then just some stone bricks on top of that now above this doorway again it’s slightly different we’ve got an upside down stair With a stair going into each side and then the underside walls leading up so yeah fill in all the windows as you’ve done before and then just fill in the rest of the space around them with some stone bricks with that back section now done we’re going to finish off this Corner and we’re going to go right the way around we’ve got three windows here so we’ll fill those in and they are just your basic standard windows so there’s the ones there and the one at the back here as well so we fill those in On the floor above so that’ll come up to this level here what we’re gonna do is again do exactly the same with the two windows coming right the way across like this we’re going to have two more sets of windows in exactly the same places here and one More on that side just like so so fill in those windows as well then what we’re going to do is just fill this set of blocks right the way up to 12 high and connect that across again filling in all of the gaps between your windows and everything the one Difference is going to be and this is the only difference and the only thing to note here rather than having a windowsill that’s entirely the polished site slabs the one closest to the wall is just going to be a full block but everything else is as per the windows before with that corner Now done we’re going to add a section to the roof here and what we’re going to do is we’re going to take this from the block here and just run a line of the slabs and this is in the black stone all the way around this section of the roof And we’re going to run it right the way through to here and that’s why we’ve got the full block so that it lines up now once we’ve added the black stone in we’re going to follow the same pattern that we had before with every other block being the upside Down stair and that’s in the warped wood and in between we’re gonna just fill in the gaps using some of the trapdoors now we’re gonna connect up this section by the conservatory and first of all we’re gonna mark out where the doorways are gonna be so we’re going to leave two Blocks and then put two here and leave two blocks and then put two here what we’re then going to do is we are going to fill this up uh like so with these stone bricks So all of those are going to be connected up we’re going to add then a line across the top and i’ll show you how to do one of these doorways firstly what we’re going to do is we’re going to place two of the acacia doors we’re going to place Two of these stained glass the light gray stained glass in here and then up the sides we’re gonna have one two three one two three of the underside walls and for each of these doorways we’re gonna have an undecided stair there an underside stair there and two underside Stairs facing into each other so we’ve got a slightly different pattern here but just very similar and then we’re going to do the same in this doorway and finish this off next we’re going to add the ball room and that is going to be in this back section and it’s going to be On top of this back section so the first thing we’re going to do is we’re going to take a line of the andersite and we’re going to take it out as far as this wall and bring it out level with this wall and just fill all of this in As a floor for the ballroom itself with the floor in we are going to add some l shapes so we’re going to put one two three four blocks here one two three four blocks here and that’s going to give us the shape of this ball going around we’re also going To take out these two blocks and we’re going to take a line of the part of the cobble deep slate and take it up right away on either side as far as the roof now we’re going to add an extra block of deep flake on top here And then we’re going to start filling in the glass and the glass is going to go all the way around just touching the edge like so right the way through and we’re going to run four lines of glass going across in total and that’s going to go all the way around And then on the fourth line of glass after that we’re going to run a line of the deep slate then we’re going to run two more lines of the glass just on top of that like so so this is going to go all the way around inside the ball room now we’re Going to start placing some trapdoors and we’re going to be using darker outdoors as some padding there’s going to be dark trap doors on these two sides like so running from the copper d plate through and then we’ll just put three more at the end like this obviously we can’t Have any overlapping so we’re not going to put any on the corners next we’re going to need some temporary blocks and we’re going to start curving this up around so i’ll just do some stone bricks so what we’re going to do is we are going to bring three blocks out like this And then we’re going to have another one here one two three we’ll do the same on the other side so we’re gonna have one two one block here three like so one here three on top of that and the last thing we’re gonna do is a final temporary block here And then that’s gonna allow us to get up to this top level where we’re gonna fill in the gap in between these and this is where we’re going to start the domed ceiling that we’ve got to connect these two sections up first of all we’re going To put a glass block here and a glass block here then now we’re going to take a temporary block there and place three glass blocks along like so we’re then going to have one extra block on each of these to bring this in and fill that gap And that allows us then to come up and connect across with a 3×2 section just there there’s one hole in here so we will need a temporary block for this so just place one block there and then fill that one in just on that side and then the same On the other side just fill this in like so on the inside of the building here just above these cobbled deep slate blocks we’re going to add another line of glass that’s going to go all the way around next thing we’re going to do is we’re Going to add a line of these walls and they’re going to stick out here they’re going to come around and stick out here they’re going to come all the way around the top again sticking out just on that bit but otherwise just sitting on top of the glass And where they stick out we’re going to connect those up from the ground or the the layer beneath i should say with some of the walls on these sides as well with those done we’re going to add some frames on the side of the build connecting over the top So the first thing that we’re going to do is we are going to run two cobbled deep slate slabs here we’re then going to have a stair and a stair that’s going to bring us up to a line of slabs that does the same from the other side so we’re just going to Have a stair and stair and two slabs like so we’re then gonna have a slab running all the way down and across the middle like this and then a stair just here a slab and a stair to connect this up which is gonna be finished off by a slab And the final ones are going to be coming from this block here and this block here where there’s going to be a slab then a stair just inside that and finish off with another slab just connecting up like this so there you’ve got a really nice frame going over the top the next Stage is going to start with us placing a dark oak door in the back hole there and then coming up here i’m coming from this side and placing a dark oak door in the middle there on either side we’re then going to shift click and we’re going to Place three trapdoors on each side and one on top of the door itself and make sure all of those are closed like so on either side of the doorway we’re going to use some sandstone and we’re going to bring that up level and then we’re going to bring this across the top And we’re going to place then a line of red sandstone just for a bit of variety and then two more lines of regular sandstone are going to go in the space here we’re going to add then a pattern that is going to be using some acacia trapdoors so we’re going to have a Pattern so that the clasps of those are facing the top and then the middle one is facing down and then we’re going to reverse that just above the line so we’ve got a pattern like that just to add a bit of visual interest to the room next we’re just going to add some Lighting and we’re going to do that from the structural points when you look up and we’re just going to bring that down the one in the middle is going to come down to just beneath this bar and we’re going to have another one coming down to just beneath this bar from Here if i can just place the last one like so and with the i’m using soul answers we can use regular lanterns if you want and then we’re also going to have ones coming down here here and on this side here and here and these ones are going to come down level with This rail so you’re just going to have your lanterns hanging from there so fill those in the very last thing to do on this stage is take some black stone and run the black stone up three blocks and that’s gonna come all the way across to this side here next we’re gonna have A look at the interior layout and we’re gonna start with the pattern that comes in the floor so we’re going to go one two three and then on the fourth block we’re going to knock two blocks out like this and we’re going to replace them with some honeycomb blocks Then we’re going to diagonally go three blocks and put some honey blocks in here as well three like so now we’re going to take some of our brown glazed terracotta and we’re going to place these like this in this orientation and going down the other way we’re going to place them In this orientation we’re going to continue this pattern coming around so we’ve got the three and then the diagonal two and then three more and then diagonal two i’m gonna do this a circle within there now some of this is covered up so you didn’t you wouldn’t have to Do all of this if you didn’t want to um however if you want to be authentic to the actual build then yeah you can do this all the way around so we’ve got the brown glazed terracotta make sure this is going in the right direction with the bits sticking out Now we’re going to use some of these baked bean blocks i mean sorry the copper blocks it’s very easy to get them mixed up though and these are going to go in like so and connect up like this and the final thing we’re going to do is Just put a honey block in each of these sections just like this i missed a baked bean there you go and that is the pattern that you have in the flooring and yeah the rest of it this center section you can carry on if you want but This is going to be covered by the stairway next we’re going to start the staircase which goes through the middle of the build and then has two curved wings so it’s quite complicated but i’ll go through it in stages for you the first thing either side of this We’re going to place ourselves a line of the slabs just at this point and then we’re going to place one two of the uh the drip stone blocks and then three of the drip stone blocks like so and two of the drip stone blocks like this i’m Gonna do the same on the other side so two there one two three and then one two under each of these sides we’re gonna put sandstone and fill those in like this and this is what i mean about some of it being covered up and then we’re to use this staircase in half Block increments so by that i mean that we’re going to be going up half block each time so the first two we’re going to have full blocks in there with a slab on top like this so we’ve got our steps coming up at this point we’re going to come down here To make some usable space underneath the stairs we’re going to add in some stair blocks like this and then we’re going to place ourselves just some slabs going across next either side of the stairs we’re going to go up three of the blocks and then moving diagonally Forward we’re going to have two lots that are going to come up four like so so three on this side as well and then one two three and four on top of these blocks we’re going to place a drip stone like so and then we’re also going to block out And have a drip stone on this side like this on this block we’re also going to have a drip stone coming up just like that with a further drip stone on top like that to connect them around so you can see the drip stone coming up and round Then what we’re going to do is come underneath here and using some dark oak stairs we’re going to place a darker stair facing this way a darker stair facing this way and then when we connect these up then it will form us a nice pattern there and give us some space underneath And the last thing to do on this stage is going to be to bring out a line of slabs just from this andesite block to connect up with the stairs just like so now we’re going to add some pillars in and the first pillar is going to be Here and this is going to be one two three four and five of these and then on the other side one two three three four can’t click properly five and then we’re going to have some here as well so one two three four and five and just the same on The other side two three four five next we’re going to take some more of the drip stone blocks we’re gonna run one here and here one here here and then four of them one two three four coming out this way one two three four and then on top of this one and one We’ll connect these up then we’ll need some temporary blocks to just connect these diagonally like so and like so now using some acacia fences we’re going to place some fences on these two sides like this and we’re going to be stepping up to the top we’re going to have one here And then we’re actually going to have three high there one three hi there i’m going to connect up there as well to bring us round oh if i can click again in the right places that would be useful we’re then going to bring these around we’re not going to use the Acacia on top of these uh green ones these warped ones because these warped ones are going to carry on up to the next level so we’re just then going to fill in with the acacia fences like so and where we haven’t got the connectors we’re just going to go like this because They they are going to be sitting on some ground soon but we’ll connect these up like this next using some more of the slabs we’re going to place two slabs on this side and two slabs on this side and then we’re gonna place a full block and two full blocks there like this And then a full block and two full blocks there like so and here at this point we’re going to start adding in some of the uh the sandstone and that’s going to come up level here and then we’re going to have a line of the red sandstone coming in like this The next phase of this staircase starts with the slab being placed here and then two dark oak coming out here with a slab on the inside and a slab just up like this we’ll do the same on this side here so we’ll have a slab there two full planks Slab on the inside there and slab on the outside just above it and that gives us a basis of where we can place some of this sandstone i’m gonna place two of the sandstone there we’ll start building this up and this is going to go up to the level of the Red sandstone and then have the red sandstone on top and we’ll do the same with the sandstone on the other side so we’ll place one here and here there and then just bring that up and this is the curvy bit of the staircase as you can see So once we’ve done that curvy bet then the next thing we’re going to do is underneath here we’re going to place some oak trap doors and those are going to will be placed right the way around in between on the underside here of these blocks and now we’ve got some dark oak that We’re going to place so the dark oak itself is then going to come out from here all the way around all the way into all of these corners because this is going to be the flooring for the next level and it’s also going to be the roofing so This comes all the way around and connects up on the other side and goes into all the little nooks and crannies but on top of that we’re going to add another layer of the dark oak as well so where we’ve got these voids that we’ve left we’re actually going to be filling All of these in with the dark oak like this so the dark oak is two layers deep and comes up and touches onto this drip stone and to these bits there so yeah it will come all the way up and what it’ll look like from the other side is Like this so you’ll see that and then you’ll also see the dark oak on top and that’ll fill in this gap for example and bring it out right the way to the edge of the build like so so fill all of that dark oak in with the ceiling In place we’re going to start with the downstairs walls and we’re going to start by adding a line of the sandstone and we’re going to actually clad the entirety of the inside of this base while we can with the sandstone all the sandstone walls so we’re going to place some Sandstone walls here just on the inside of this we’re actually going to place some sandstone walls just here as well going right the way to the ceiling on both of these edges and then we’re going to leave a gap i’m gonna have a sandstone wall uh sandstone block drive coming up here With one here and the lintel of this build going just like this so we’ll do the same on the other side as well so we’ll have the lentil just there and then sandstone above it underneath it and then a line of the sandstone coming out like this Didn’t need to fill that in of course and then a set of blocks coming out just in front like this as well and this is going to form a curve that’s going to go around the build and we’re also going to bring that out by two blocks like this and Two blocks on the other side which is going to fill this in to On this side we’re going to bring it out one more because we’re going to bring it right the way out to this doorway so we’ll fill in all of these blocks fill in this central section by the window fill in this bit here and here we’re going to put some polish Down to some slabs coming through into this section we’re going to have another polished underside slab and then we’re going to just clad the entirety of this section in the sandstone so anywhere where you can see the bricks and there isn’t a chimney a chimney i mean a window obviously we’re Going to just put the sandstone in front so it’s going to cover everything up like this now the one other thing that we’re going to do is we’re going to add a wall coming across just from this section so it lines up with this window just here and we’re gonna have that With a doorway just at this section so just level with the edge of this so just inside and we’ll put ourselves again a lintel here with the sandstone block there and now we can place ourselves going from the right side a doorway in here and then we can place ourselves a Doorway in here as well now on the other side of the build we’re going to bring this out one more and i’m just going to mark on the floor where all this sandstone’s gonna be we’re gonna have two coming out this side like this so that’s gonna be marked out there We’re gonna have a line coming across and filled up to the ceiling all the way around here just to fill this in once we get to this corner and this is the corner at the front of the build just here before this window the second window along we can actually Take these blocks out because there is another block in place and we can put the sandstone in there so we can bring this all the way along the inside of the window all the way around the build like so we’re going to bring this all the way around until we Get to the point where we can connect this up so this is going to come across we’re going to have a doorway just here let’s pop the door in we’re going to put a door in here as well we’ve already got and then we’ll connect up Just like so so this is where all the sandstone walls are going to go here we’re then going to have another sandstone wall coming through like this and this is going to have a doorway just there we’re gonna have another sandstone wall coming through here basically you can put the the rooms Wherever you like but this is where i’ve chosen to put them and the other one is here just coming across like this doorway here as well so you can just make yourself some interesting little room shapes and fill all of these in and then put your door Or wherever you’ve got a door you just simply add yourself a lint on top of the door go in the same direction fill in all these walls until they get to the ceiling and then we can move on to the next floor and that is going to Be it for the first part of this tutorial make sure that you hit that subscribe button and get ready for part two also if you leave a like it’s most appreciated asses any comments down below so thank you for watching and i’ll see you all next time on 80 craft bye You Video Information
This video, titled ‘MINECRAFT: Addams Family House TUTORIAL – How to build Haunted House in Minecraft’, was uploaded by AdieCraft on 2021-10-24 21:00:12. It has garnered 96278 views and 2746 likes. The duration of the video is 00:41:40 or 2500 seconds.
They’re Creepy and they’re kooky, mysterious and spooky. They’re altogether Ooky. The Addams Family. Yes, that’s right. This spooky season brings a new Halloween Build. It’s the Addams Family House from the movies. In Part 1 of this 2 part tutorial i’ll run you through all the steps needed to make this fantastic and frightening house including the full interior layout ready for your to decorate.
Make sure to subscribe so you don’t miss any future Minecraft tutorial videos.
A world download is available via my Discord. Come join the growing community over there.
Adiecraft Discord: https://discord.gg/HBnFPcK
WBC Builds texture pack available here: https://www.mediafire.com/file/n9g2kcitx33530d/WBC_Builds_V1.4.1.zip/file
Tutorial for base car (I adjusted this slightly): https://www.youtube.com/watch?v=WjDSvnuYw-s&t=185s
Follow me on Twitter: @AdieCraft
Alternative titles Minecraft Addams Family Movie House Minecraft Halloween House Minecraft Addams Family House Addams Family House Minecraft Easy Minecraft Halloween Base Minecraft Halloween Base Minecraft Halloween Ideas Simple Halloween Ideas Easy Halloween Ideas Halloween Base Ideas Halloween Build Ideas Spooky Base Ideas Spooky Build Ideas Spooky Halloween Ideas How to build a Halloween Base in Minecraft How to build a Halloween House in Minecraft Easy Halloween Build Ideas Minecraft Survival Base Survival Base Minecraft Minecraft Base Tutorial Base Tutorial Minecraft Uncle Fester’s House Gomez’ House Morticia’s House Wednesday’s House Pugsley’s House
Texture Pack: WBC Builds Shader: BSL 8.1.0
Music: https://www.purple-planet.com/
Cinematics provided using: https://replaymod.com