Hello there and welcome to 80 craft you join me back for part two of this fantastic halloween themed adams family build if you haven’t already check out part one which will be linked in a card and in the description and before we get going make sure that you also hit that Like button and hit that subscribe button as it really really helps the channel these are the materials you’ll need for the build and this includes all of the internal walls floors and staircases back into the build now the first thing we’re going to do is add some detailing around the entranceway to the The ballroom and so we’re going to place ourselves some sandstone stairs that are going to go over in the two corners and then in between that uh making sure that you’re facing towards the center of the build so that you don’t get the clasp visible we’re going to place ourselves Some of the acacia trapdoors and then we’re gonna also place two on the sides like this just to give us a bit of an entrance then similar to what we did in the last build we are going to give ourselves a bit of detailing uh above The doorway and we’re going to do this by having the clasp going in different directions for the acacia trapdoors and giving us the detailing there on this right hand side of the build we’re going to start by adding an extra wall going in here so we’re going to add two Sandstone blocks we’re then going to place a red sandstone on top and we’re going to have an upside down stair going through which is going to create our little doorway to this little room now because this is a small room we’re not going to clad all of the walls Are just going to keep all the space that we’ve got next we are going to bring out the sandstone and we’re going to bring it level with this second entrance onto the top of the conservatory we’re going to leave a space of 2 and then we’re gonna have two More blocks we’re also gonna have two blocks on this side of the window just to finish off this area bring the red sandstone across like this stand on top and then we’re gonna create a little archway here by placing two upside down red sandstone stairs On top of this we’re going to bring an entire layer of sandstone across because this is going to take us up to the ceiling and the floor for the next level so we’ll fill all of this in and that’s this side of the build done for the Other side we’re going to bring out three blocks and then that’s going to be a doorway then we’re going to have three blocks and then that’s going to be another doorway and then we’re going to start filling this in again we’re just going one block next to this we’re gonna Put an archway here in a second so we’ll fill these in with the regular sandstone like this then the red sandstone goes on top and then we’re gonna again as we did previously place some lentils which are going to be some upside down red sandstone stairs with the final line of sandstone coming Right the way around and on top of this to just finish off the look and this just gives the walls a bit more of an interesting look uh to that and we’ll come in here and place ourselves a couple of doors next we are going to start adding in Some of the cladding that’s going to go all the way around to the edge of the build so it’s simply a case of wherever you’ve got any exposed stone we’re going to be covering up with the sandstone and doing it in the same pattern so we’ve Got this railing this line of the red sandstone that goes right the way across so we’ll do that all the way around like so i’ll just show you with the regular sandstone you can put the other two layers on top yourselves and we’ll fill in this little gap just So it looks a bit nicer in that corner so that’s gonna come around now the other places that we’re gonna have the walls are one wall is gonna come directly out of here and we’re gonna bring that out and then we’re gonna have a doorway here so there’s one block then A doorway and then we’ve got the uh the rest of it here and then in the back section it’s from this sticking out bit this protrusion we’re going to have ourselves another little doorway coming through from here so again these are going to be interconnected rooms that are going to bring us round And in the doorways we do them in exactly the same way we use the red sandstone lintel and then we just place the door whichever side you fancy placing it so fill this in and bring this all the way up to the same level as this and then we can start thinking About this archway and the flooring next we’ve got this archway so we’re going to use a line of the polished andesite going up either side of this then next to that on both sides we’ve got ourselves just an upside down stair with a slab in the middle we’re also at this Stage going to bring up these warped fences and these are going to come up to level with the top of the walls as some supports running right the way through the build and then it’s a really really simple step of actually just taking our not that That’s the one uh taking our dark oak planks and running a line of these all the way across this level so this is completely gonna be filled in with a floor coming out into the room here the one exception of that is this block next to the stairs We’re going to have a stair up there and that’s going to tie into this tower but everything else yeah just fill it in with the dark oak to give us some access to the upstairs we’re going to start by creating a staircase and that’s going to start one block behind this archway and We’re going to go with a stair that way and an upside down stair then a stair on top of that and this time we are going to then place ourselves some slabs running across in a line that’s just going to go across the window there Here we’re going to have a stair on top like so not that just here and then one final stair which will then link up to that stack that we put there before now underneath this we’ll have a slab here and an under stair just to give it a bit More structure so it doesn’t look like it’s floating the next stage is going to be adding some windows that are going to be popping out of the roof and i’ve marked some of these and but i’ll go through all of these to show you where they’re being placed for each of these We’re going to replace the purple wool and we’re going to put a polished underside and we’re gonna have three polished underside coming up either side to show us where these windows are gonna go so the first one is directly beneath these two windows on the left of the entrance Then we’ve got one that’s directly above this window here that is going to go up and again with our three blocks going either side the next one directly again above this window in the middle here so we’ll go up again with three blocks like this for now just to mark the windows out Then the next one is one block in from this underside so you’ve got andersite and then stone and then you’ll have the polished underside which means that you can have your window frame going here and equally you’ve got one that’s just around the corner so these touch on the Corners with the polished underside itself and the last one is directly above this window that we’ve got here so you’re going to have your frame coming up here now we’ve got two on this side one that’s directly in the middle of this section that sticks out so we’ve got our three And our three and the final one here is just over the left hand side of this uh these two archways so we’ve got that there and that will be one two three four five and on the sixth block you’ll be placing your polished underside for that one all coming in From this side one two three four five and on the sixth six blocks as you can see it’s directly in the middle of this walled section now we’re going to be looking at finishing off this big iconic central tower we’ll be doing this by placing the corners first and foremost So on top of the underside that we’ve got here in these two sections up there and there and then moving in not on this first but the second block so you’ve actually got four blocks gap in between we’re going to be starting some of these towers and these are each Going to go up including this block that we’ve just placed a total of 12 high with those four pillars in place we are firstly gonna fill in the entirety of the two sides so we’re gonna fill in all of this side and all of this side right the way up to The top of this tower with some of the stone bricks at the back of the build now inside the base we’re gonna count up one two three four five and on the sixth block we’re going to connect this up and then before we do anything else we’re gonna level with this come round To the two sides and on the front side we’re gonna knock out the second block and we’re going to do the same on the other side and these are going to be some little windows so we’ll put some of the light gray stained class panes in there Before we take this and fill it right the way up to the top here and then we’ll start working on the front of the tower at the front of the build now we’re going to add a window in so we’re going to place an andesite here with two Of the stone bricks next to that with three then andesite coming up the side and then a stone brick archway going over the top so these are exactly the same as the ones that we’ve done before and we can do the front nice and quick in the same way that we’ve done Previously with the stairs going into the sides like this just as a refresher and then the andesite walls going up like so now above this it’s slightly different for this last level we are going to have two andesite blocks here and here with a stone brick block in the middle because We’re gonna have two windows so in the middle then we will bring the andesite up three like this and then we’ll finish off with the stone bricks coming across like so so these we’ve got a double window up here we’ll add in our glass panes and these are the light gray stained glass We’ll put a little we’ll put a ledge at the bottom and then across the top we’re going to have an andesite stair like so an undecided stair going into the side and one going in like this and then we’ll just fill in the andesite walls to the top like this Now just as we look to the front on the right hand side of the tower that we’ve just built we are going to build ourselves a little a frame and we’re going to do that by placing five of the walls and these are the stone brick walls and we’re going to then place Four of the walls like this with a stained glass pane in the middle and then three walls on top of that and one wall on top of that like so and then on this side we’re going to place ourselves two of the black stone and then two of the Black stone coming in this way like this and on this side we’re going to place two of the cobbled deep slate just like so in between each of these windows we are then going to start filling in and we’re going to bring up three of the black stone until we get to these Corners so anywhere where we’ve got a corner like this rather than black stone we’re going to be using cobble deep slate and this is just to kind of give a bit of variety to the uh the roof the the ceiling itself so we’ll come up with these three on each side And bring these around so whenever you’ve got a corner like this that sticks out we’re going to be using now with these corners like this you can take that block out if you wish or you can just leave it in i’ll just leave it In for the sake of this but it will be covered if you did want to do that and you could potentially replace that for a bit of extra space in the in the roof but yeah we’re going to bring these all the way around and this is a corner so that’ll be cobbled And this isn’t a corner so that’d be black stone we’ll fill all of these up right the way around the build and that will bring us up to the same level that we have here uh right the way through so yeah get that done and then i’ll show you the next stage With the black stone built up first thing we’re going to do is fill in all of these windows and we’re going to use the light stain light gray stained glass panes for all of those so do that all the way around and then after that starting from the Front here we’re going to run a line of the black stone slabs and these are going to be level with the bottom section of this uh the black stone that we’ve placed and they’re going to come out round and these are going to go all the way Around the build and i’m just going to miss the corners out on this tower but everything else will just come round and just have a line going all the way next to this when you get to the window spaces leave a three gap for the windows but aside from that we’re gonna bring These all the way around for the corners where we’ve got these bits uh we are going to use some cobble deep slate instead of the black stone so anywhere where we’ve got the corner so it lines up with this we’re going to use the cobbled deep Slate rather than the black stone so for this one i’ll show you again it would be a cobbled deep slate for this corner and likewise on the other side it would be a couple deep slate for the corner but black stone all the way across For the rest of it now when you get round to this section of course we’re not going to go around the ballroom section so we’ll just stop when we get to that ballroom section and then pick it up on the other side here like this with the black stone coming out across So do that literally all the way around the build uh once you get to the corners including across the front in front of this section here so we’re gonna have the black stone coming out like so just beneath this little window on the same a-frame so that’ll then connect up here with the Section of the roof in place we’re gonna switch to our warped wood and we’re going to start placing first of all some upside down warped stairs so the first one we’ll start from is on the left side of this tower then we’ll skip one and place one here And then we’ll place one here as well and then it’s going to be either side of the window just basically running in a line and it’s going to be every thr every other block we’re going to place these so when you get to the edge then you get Another one coming around the corner there’ll be one here and so on and so forth just right the way around the build like this now if you do get lost at any point then find your next find the corner and work away from the corner so the important thing to make sure is That when you get to a corner like this you do have a an upside down stair on either side and then that should line up with the build anyway and then when you go around this side obviously to make sure it’s easier you start the corner and work across this Way and then you know exactly where to place them so these are going to go all the way around the build and once you’ve placed these again work from the corner once you’ve placed these in place then you are going to carry that round i’ll do the last couple here One more here skip that block and then place one like this in all of the spaces that you’ve got with the exception of this space in the middle so this one here we are going to in the middle of the tower just put ourselves a a nice little uh slab there Everything else moving around right the way around i’ve missed one there we’re going to be using some of the warped trapdoors so fill in all of the trapdoors right the way across and that includes under these uh under these windows so these windows are going to have this this warped Trapdoor underneath as well so bring in all of the warp trapdoors in all of the gaps as well with that done all the way around we’re going to finish off each of these windows the first thing we’re going to do is we’re going to put three Black stone over the top of each and every one so where we’ve got the the blocks there we’re going to have three black stone on top then placing against the underside we’re going to have two of the walls on each of them and again this is the same on Literally each of these windows that we have because they’ve all got sufficient gap to do this you don’t need to change it for any any reason and then on top we have a full underside block like this so it links into the roof and then we have a slab just in between The two so add all of those sections in with the three black stone on top and then this detailing and then you’ve got all of these little windows finished to deal with this a frame we are going to firstly place a black stone block rather than a slab Just here and we’re going to place a cobble deep slip wall there like so on either side of this then we’re going to place another black stone so there’s one there and one there and then we’re going to place a wall here and two walls on this side From this we’ll take a polish black stone and bring that out to a block in front and behind that we are going to add some of the blackstone so we’re going to have two blackstone blocks on this side and one on this side just like this And then on top of that we’re going to have a line that’s going to run right the way across between the two of them now actually that these two here should be the cobbles deep slate because again that ties in with the corner but that’s fine And we’re also then going to take some of the polish black stone and replace this block here which is next to this cobbled deep slate and this block here which is next to the wall with the polished black stone blocks and using some stairs we’re going to Step up across the build so there’s going to be three on this side and then three on this side the same way i’m just gonna bring us like this then we’re gonna have a stair on the underside like so and then some more upside down stairs Two sides just to finish off and give us the lovely a-frame look the next layer of the roof we’re going to use some brick walls so well we’re going to use some black stone and some copper deep slate walls rather so the first thing we’re going to do is on This corner and use a cobbled deep slate wall and like we’ve used with the blocks these couple deep slate walls can go on every single corner so rather than using the black stone we’re gonna use those but then in between we’re gonna connect up with the black stone like this and that’s gonna Be all the way around so again you’ve got this cobbled deep slate and then as soon as you’ve got that you put a cobble deepslick wall on top and the rest of it is blackstone once we get to this section here we’re just going to place three black stone Here and then connect up with the walls like we would before and also at this stage we’re gonna do some of the window detailing so what we’re gonna do is we’re going to place a stair here and a stair here with a stair upside down in the middle And then we’ve got a slab and these are all polished black stone and slab on either side and then two of the polish black stone slabs on top here so where we’ve placed these three we’ve got one in the middle and then we’ve got an upside down stair Here i’ll show you again right way upstairs on either side of that and then another slab on top of that and one either side to give that a nice kind of look to it so we’ll do that on all the windows and connect everything up with The walls all the way around as well next we’re going to start with some black stone so we’re going to start running some black stone against the back of these walls that we’ve got because we don’t want any gaps in the build when we come to the bits that Stick out like this we’re actually just going to carry on and fill in those spaces so these are going to have black stone above them and again here we’ve got one that sticks out slightly we’re just going to fill in that gap so we can carry on the black Stone and basically make the roof a bit smoother going all the way around there so once we’ve done that all the way around and again it is a slight pain that these blocks um the walls don’t connect up in a slightly better way to these but that’s just how it is when we Get to this section over here again as we did with the other bits we’re actually just gonna fill in that whole bit and then carry this on next to the walls and connect up and then also connect this up going this way to this block here now once we’ve done That all the way around we’re then going to run another line of blocks on top of that so we’re just going to run these through and with these blocks the one place that’s going to be slightly different is when we get to these edges because we’re going to again Use a lovely cobbled deep slate rather than the black stone for any of those corners that stick out on the edge so like we’ve got the corner just over here when we get to the corner here we’re going to have the cobbled deep slate this line is going to keep going across Just behind this and then we’re going to have the full line going across the top like so and the one last thing we’re going to do to connect things up is we’re going to take one of these stairs and just tie that into the roof like this so we will have the All of these bits filled in and two lines so a line of the blocks will then be sticking out above the walls that we’ve created with those all done we are going to finish off this section of the roof by just taking some of the cobbled deep slate and running The walls for that cobble deep slate right the way around the build and anywhere where it sticks out we’re just following the line of the roof and we’re not changing any of the blocks it’s going to be cobbled deep slope right the way across and where we’ve tied into this roof as Well as you can see that connects that now you might want to just change that one block uh just so it matches up a little bit better with the uh the cobble but again we’re just running this through and all the way around the bill until we get to the edge Now we’re going to deal with the attic itself for the build and we’re going to start by placing some spruce logs now the first logs that we’re going to start placing are some logs going up here and these going to come to the same level as This roof now we don’t need to worry we’re going to be putting some additional blocks on top so you’re not going to see the ends of these and starting from either one of these sides is fine but we’re going to add some pillars on either side of this on this side we’re Then going to use these as a starting point we’re going to go one two three and on the fourth block we’re gonna add another pillar and then we’re gonna go one two three and on the fourth block this way we’re gonna add another pillar and then from That one two three and on the fourth block we’re going to add a pillar and then we’re going to match these up so we’ve got some pillars coming up from the ground on this side and then do the same here one two three four one two three and four Now on this we’re gonna have a little bit different we’re actually going to go to the fifth block so one two three four five and then the sixth block so this five block gap in between and then we’re still going to match that up with the other ones and that’s going To be the only ones that we’ve got there we are going to have one more set of pillars going up which are going to be running up this wall and that’s going to allow us to have a ladder to access this top roof section if we should if we so wish So for example if you’re flying in on electro it’s nice to be able to land on a roof and just get into your build through that way so first of all build up all of these pillars with these all in place we’re going to connect some of Them up and then connect up for the roof as well so the first thing that we will do is we’re just going to randomly pick some of these and we’re going to come down onto the third block down and we’re just going to connect some of these across So it it’s meant to be a little bit random how these are tied in together so you can pick whichever ones you want to do just don’t do all of them and connect some of them across like this and then maybe let’s have one more here like so And this is just to give you a bit more of an interesting layout whilst you’re actually looking at the uh at the roof the other thing to do here is to take some logs and we’re going to connect everything to everything else and what i mean is we’re going to make a framework That’s going to go across now all of these are going to be running this way and that connecting up with our logs going like so and this is why we’ve got the third block down so we’ve got this nice interesting gap here and this is going to make it look like The roof is supported with a little bit of structure so we’re going to do this right the way through the build including across here just above this doorway to give us a nice entrance way so connect all of those up the final thing to do once you’ve connected all of those up Is taking some of the oak slabs and not the petrified ones but i’ll just pop these in now because i’ve picked them up some for some reason but putting the slabs as top slabs in between and what that will do is when you look down It gives a bit of depth into the ceiling and we’re going to fill in all of these gaps with the slabs so yeah get that all filled in once you’ve added your logs and your slabs in then the top of the roof will will now look like this and The one other thing that i have just done is added some ladders in up that log and up so we’ve got access to this roof section now we’re going to start placing the two chimneys and i’ll show you where to place them and then i’ll show you how to build one they are Identical so once you can build one you can build both now on this side we are going to be coming in one two three and on the fourth block we are then going to count in to the third block so one two three so it should be just here this is the starting Place and we’re going to be building this as a three by four section so there’s two holes in the middle like this in those two holes we’re just gonna stick some slabs because we don’t want anything to spawn on the inside uh so yeah that’s two so you’ve got three gap Here and two gap here on this side it’s slightly different because we’re coming in onto the third block for both of them so there’s one two and then the third block one two and then the third block and that is our starting point but it’s exactly the same three by four and that Should then line up with this hole that we’ve got here so again we’ll put the slabs in we’ll start building the chimney itself now the chimney is simply done using some walls and we’re going to run one then two and then a third line of the walls going All the way around this build to get up to the correct height as i say once you’ve done this on one side do it on the other side once you’ve got to this point we’re gonna place two of the top slabs and that is so they don’t connect to these wall uh these Walls and make them look a bit weird once we’ve placed the slabs we’re gonna put two of the uh the it can be either of the campfires that you want on there and a line of underside stairs running right the way around the edge like this on top of those walls The final touch will be a line of undecided slabs going on top of these to give us exactly the look that we want for the chimney two chimneys are now done and we’re going to finish off this roof section by adding a full line of a full layer of The black stone slabs now this will make the entirety of the roof completely spawn proof so you don’t need to worry about lighting anything up just make sure you do get into all the nooks and crannies like this and by using the slabs it’ll make sure it doesn’t connect To any of the walls as well so you’ll be good there the one other thing that you might want to do is you can either leave this open again it doesn’t really make too much difference or you can add yourself just a trapdoor i’ll use a Warped one here and you’ll be able to get up and down from your roof as soon as you yeah whenever you need to get access to it so yeah just fill in all of these black stone slabs covering up this whole section now we’re going to deal With the stairs going up the tower and the first thing we’re going to do is use three slabs to cover up the stone brick that we can see above us before starting to place some stairs against the wall as we go we are going to make sure that these are Structurally sound as much as you can in minecraft by making sure that we’ve got some of these stairs on the underside as well and it just makes them look a bit nicer once we get up to this level we are going to have three slabs going across So that we can carry on walking before we have two sets of stairs against this wall that brings us level here at which point we’re gonna have a slab just there now we are gonna have ourselves a stair going up one more level with a slab like so And then one more stair going up and then we’re going to build ourselves a little platform going across and round like this so this again will stop us from falling down the stairs and will give us the uh the right look that we’re looking for so what we might Want to do is place a spare a slab there rather and a slab there and one there just to make it look a little bit more structural as i said once we get to this point we’re going to carry on up to the top um we’re going to do this by placing The stairs going up here and here then we’ve got ourselves a platform and we’re going to have again a stair on the backside coming round which is going to allow us to step around and then at this point we’ve got two more stairs that bring us out on top And what that will do is if we fill these in with some slabs it should then allow us to get through this section without bashing our heads as we go and again as i’ve mentioned where you’ve got these stairs fill in with upside down stairs To make them look just a little bit more sturdy so yeah do that right the way through your build and then you can get access to the top of the tower at the top of our tower that we can now access we are gonna have a dormer so the first thing We’re going to do is we are going to place the under area for that and then three of these up each side like so with our light gray stained glass in the actual middle with an andesite slab and a block on either side with two walls going up like so Then on the corner of this we’re going to place two of the cobble deep slate on each of these corners like this and then we’re going to fill the gaps in between in with the black stone like so all the way around and then as we’ve done on the previous Layers we’re going to take a line of the black stone slabs and we’re going to run those level with the edge of this All the way around like this and on this side as well with the corners being done with the cobble deep slate to fill it in so finish that off for your roof and then we’ll get to the detailing next we add the detailing to the underside of the Window with our warped uh wood so we’re going place three of the upside down stairs here then on the sides because these are four long then we’re actually gonna place two in the middle so that we can still hit the edge there and then on the back it’s just gonna be three And finally on this side again four with two in the middle then we use our warped trapdoors to just fill in all of the gaps around this section of the roof which gives us the desired look and then also in the middle there so these pillars are being supported Running around the edge of this we’re going to start placing some walls and this is where we’re going to place the deep slate walls in the corners with the black stone in between like we did on the main roof like so then we’re going to use our black stone Coming through and filling in this gap like this before going up for another layer and this one’s firstly going to go across the window and then we’re going to have it coming around like this on top and what we’re going to do at this stage as well is we’re just going To fill in there like so now we’re going to have a second line of walls going in and that’s going to have again the cobble deep slate on the corners like this and then the black stone walls going around the edge like so and that brings us to the point where we Are going to then have one final layer of the roof and so we’re going to place a cobbled deep slate on each of these corners and that’s going to be the blocks with filling this in in its entirety with the black stone like so and finishing off With a line of the cobble deep slate walls going around the roof like this so that gives us the shape of this top little tower of the roof that we need the other thing that we are going to do to make it spawn proof on the inside is As we did do just place a couple of slabs in there and then it’s completely spawn proof now we’ve just got the detailing to go on this window and the finishing touches to the build so this final roof section we’re going to place ourselves an upside down stair in the Middle with a stair either side and then we’re going to get our polished black stone slabs and place one here one here and two coming out of the roof on this side and that is the end of the roof now we have some fences that we’re gonna Add and these are gonna be done with some iron bars and again the texture for this is slightly different thanks to the wbc builds pack that i am using there will again be a link down in the description for this again it just makes the iron bars look a little bit nicer so We’re going to put some of the the iron bars all the way around here on each of the corners not that there we are gonna use a chain to just add a flourish to this build and just make it look a bit more gothic and look nicer from the ground We’re also going to take our iron bars and we’re going to do the same we’re going to run them all the way along the top of this wall right the way around the build on top of this section equally every time we come to a corner so in this corner as well We will add some more of the chains just to give it some detailing like so so fill in all the iron bars there we’re going to have another set of iron bars on this section just connecting up these two sections here and here with again you guessed it a chain on the Corner basically we’re going to be putting a chain on every corner that we come to like this then we’ve got at the back of the build we’ve got a little section here where we are going to have some iron bars and that gives us a little juliet balcony And runs us through a little section that comes around here we’re also going to have one here and on this one again we’re going to have a chain just on that corner to give it a little bit of detailing we’ve got a couple more places just to Do this one of which is on the edge here of the conservatory so we’re gonna run the iron bars all the way around the conservatory edge like so which means we’ve got two chains for the corners And then the last little one that we’ve got is another little bit that goes right the way across just just like this and these ones they don’t actually need the chains on the corners but you can put them on if you if you like but personally i will leave the Yeah let’s leave them on let’s leave them on and once you’ve done that all the way around the build then that will be the end of the building the only other thing to do is to then go around your build and at the moment it’s very plain we’re All using just the one set of blocks we’re going to mess up some of this these block placements slightly and we’re going to do that by adding in some of the cracked stone brick instead of the stone brick and just some regular stone as well so anywhere you’ve got Stone just mix in some of the cracked stone brick and some of the stone where you have got the big andesite pillars you want to be mixing in some gravel because when you do that again it goes really nicely with the underside and gives you the effect that you want On the black stone on the roof here then you might want to mix in some of the polished black stone bricks to break up the roof itself you can generally just leave the the detailing on the side with the cobbled deep slate but if you did want To put in some of the cobble deep slate bricks you could as well but yeah just mix that up around the build and i’ll show you what that looks like and then there’s one more just little detail that we’re gonna put on the front before we’re completely done so i’ve now added The finishing touches to the build the main thing that i added on the front of the belt is in the actual films there is a it’s like a paint splatter like a paint bomb’s gone off and it’s colored some of the blocks there so i’m not going to run Through exactly how to do that but remember that this world is available for a world download if you’re interested so do make sure to check that out and that’s via my discord and there will be a link in the description to that so here is the Finished build i hope you enjoyed it i hope you’ve liked it if you have please do let me know in the comments and leave me a message i really do appreciate seeing those and also leave a like on the video that really helps as well share this video with your Friends if you’ve enjoyed it and also make sure above all that you subscribe so you don’t miss out on any future videos and i will see you all next time on 80 craft bye You Video Information
This video, titled ‘MINECRAFT: Addams Family House TUTORIAL – Part 2 – How to build a Haunted House in Minecraft’, was uploaded by AdieCraft on 2021-10-30 18:00:10. It has garnered views and [vid_likes] likes. The duration of the video is or seconds.
They’re Creepy and they’re kooky, mysterious and spooky. They’re altogether Ooky. The Addams Family. Yes, that’s right.