Minecraft: How to Build a Mansion 8 | PART 3

Hey guys i’m back with part three for this tutorial on how to build this mansion here this one we’re gonna be finishing the main exterior of the house so we’re gonna be doing the roof for the second floor of the house in the middle and then we have all of the windows in

The roof and then we also have the porch and balcony at the back side of the house so we’re going to continue using most of the same blocks that we used in the previous videos so we have the indecite the gray concrete with the white stains glass paints the pillar quartz blocks

The smooth quartz stairs slabs and blocks and as these stone brick stairs cobblestone stairs stone brick slab and cobblestone slab and then an iron trap door sea lanterns anvil and they just want to make sure to grab is the regular court stairs and some quartz bricks and i just noticed i think i

Accidentally deleted this block when i did the extra texture for the roof so maybe go through and double check make sure you didn’t delete any blocks like i did i just now noticed that so went ahead and fixed it but uh there doesn’t seem to be any other issues like that

So we’re gonna start by doing the roof here for the second floor make sure you have a smooth court stairs and the slabs and we’re going to add the overhang first so with a smooth cord stair i’m here at the front i’m going to place this one just right next to this pillar

Just right up against it like that and then we’re gonna curve into that bring this over until we’re lined up where that pillar is so you can see we just have this single space remaining here which we’re gonna fill in in a second let’s go ahead and add the overhang

So i just brought it over to our lined up with that pillar and underneath here i’m just going to add a set of smooth cord slabs just half a block lower than these stairs And now here at this corner we’re going to add a smooth quartz slab now you can switch back to the smooth court stairs so we’re going to continue placing these along the side all the way towards the back until you line up with the other pillar

So just right there for now this is gonna be brought out a little bit further once we do the balcony but i’m just gonna stop it there and now let’s go back up towards the front we have another slab right here where that curve is we’re going to add another stair and a

Slab we’ll do the same thing on this side so we’re just going to have a stair right here lined up at this pillar we’ll have a slab towards the right of it slab towards the left of it another stair right here and then we’re gonna curve into that and bring this

Over until it’s lined up with this pillar in the corner anything will add this set of slabs underneath anything will have another slab here in this corner and then another set of the stairs going towards the back like that we’ll head on back up towards the front

We have a triangle point that we’re gonna have right here in the middle so now for this one just like the others we’re gonna have a single block right down the middle so this is the center point here so i’ll bring up is this left side first

From this corner so we just have the stair like that upside down on its side and then just back and forth so we have that side brought up like that we’ll do the same over here until it’s at the same height we have the single space remaining in

The middle which will be the upside down stair and topped off with the slab You could then switch to the full blocks of the smooth quartz will go on the inside and just fill all this in here so i’ll just follow along all of this work my way back down and adjust this little remaining space here so now from the outside it looks like that

And now let’s start marking out the big triangle points on each side so over here and on that side what i’m gonna do is switch to the smooth chord stair i’m just gonna add one more here at the back side because the start of the triangle point will

Actually be right on top of this stair so if we weren’t going to have a balcony here this would actually be a slab and then we would end up continuing the overhang here so this stair is acting as that slab that would be here so if the triangle point of the roof is

Going to start right here as well as where this corner is so i’ll just start here at the front and it’s just going to be the same design again except we’re not going to have a single space for the middle point both sides are going to be brought up right next to

Each other just back to back so i’ll start here just the same designs we have the stair like that upside down anything just back and forth and then like i always do i just like to bring this up until i feel like it’s about where it should be i don’t count

It or anything like that so i’m going to stop it i’ll bring it up maybe one more i feel like that’s about where it should be and then i’ll start back here right on that final stair and i’ll start bringing up this side and so we’ll see

If we have to make adjustments or maybe that first side we brought up is where it should actually be so now you can see we have to just bring up each side one more time and now they are just back to back like that no center point so now exactly what we did

Over here we then gonna do over here on this side And there we go and now this side is the exact same way so we have those two big triangle points marked out now let’s switch to the endocyte i’m going to then just fill in all of the space behind it so just this entire shape here so

I’ll just go ahead and maybe bring it all the way from one side to the other if i just work my way up along those upside down stairs on the inside So i went on both sides and just completely filled in with the endocyte i’m gonna add a little feature up here at the top so i’m gonna leave these two spaces so i’m gonna go just on this layer i’m gonna carve out four i’ll replace it with a smooth quartz stair

And they’re all just going to form a square like that now let’s go on the inside we’ll switch to the smooth quartz block and just fill in that remaining space so just a little extra feature like that i’ll head on over here to this side and i’ll do the same thing Now let’s start filling in the roof itself so i’ll just start out with the stone brick stairs and then after we have it all filled in i’ll go through with the cobblestone so i’ll start here at the front we have this first layer so just right

Here on top of the overhang again and we’re just gonna be going in between the two quart stairs so just right into that little triangle point right there we’ll go up on the next layer we’ll do the same thing so it’s just gonna curve right into that one

Like that go up in the next layer and then we have this final one here So it all just flows together right into the shape and now we have a set of slabs right here so let’s grab the stone brick slabs i’ll just swap out those full blocks and we’ll fill this in and now what we did over here with the

Stairs we’ll then do over here on this side now we’re just going to continue going straight across from one side to the other until we bring it all the way up to the very top so we don’t have this shape to worry about anymore so it’s just going to be straight across

Pretty simple now until it’s all filled in So there we go the entire front side is filled in now let’s head on towards the back and we’ll fill all of this in here so we’re just going to go straight across from one side to the other we will eventually have to make adjustments when we do the balcony because we’re

Gonna have a triangle point right here in the middle i thought we’re gonna have some slabs to cover up the balcony but i think it’ll make it easier just to go ahead and completely fill in the main roof and then we’ll make those adjustments later

So i’m just going to be here on the same layer as this first stair we’ll bring this straight across all the way to the other side and we’ll just keep doing that all the way up towards the top So there we go now the entire backside is filled in and now before we start adding all the extra texture in the roof i want to go ahead and mark out where the balcony is going to be we’ll do the roof for that and then we’ll add all the

Extra texture and then the last thing we’ll end up doing is all the windows in the roof so we’ll jump on into this balcony slash porch next so i have all the blocks we’re going to be using for the balcony not including any of the roof so you could just grab the pillar

Quartz blocks the smooth quartz stairs the slabs and the full blocks and so we have the quartz bricks the anvils the sea lanterns the iron trap doors and then we’re going to be using the regular quartz stairs just one time so you can start with the pillar quartz

Block so we’ll just mark out where they’re all going to be so i head on over here towards this left side first we’re gonna be four spaces out away from this pillar so we’re gonna be on the fifth block so right here so just one space away from

The edge of this concrete here and now you could just line up where the other ones are so just right there so these are just six spaces apart we’re gonna have another one right here so once again just another six spaces apart and then we’re gonna have one going out

From the corner here just like how we did it here for this part and now we’ll do the same on this side so four spaces out away from it right there six spaces over place one another six spaces over place one and then one out from the corner of that

So we have all those marked out now we already have the one layer so on top of these we’re gonna add an additional 15 more going up so it’s going to be a total of 16 blocks in height for all these pillars so now we have all those pillars marked

Out they’re just brought up to the same height as the other ones for the main part of the house now let’s switch to the smooth court stairs we’re going to be placing these upside down all the way at the bottom in between most of the pillars so we have

The space of four here on the sides is that we have the two spaces of six so just the three sections like that we’ll do the same on this side And now here in the middle this is the only use for the regular court stairs so this is just a step up right here in between those pillars and i could go ahead and just get rid of that so you don’t accidentally use it we can switch to the quartz bricks

And we’ll fill in all of the space throughout here within the edge of all those stairs and we want to make sure to bring it in right underneath the doorway here so just in between these pillars so now you can just see all the other space we have to fill in

So now i have all of that filled in with the quartz bricks now you can switch to the anvils and we’re just gonna go in between all these other pillars and this is just going to be the rallying so there we go so we have the porch part

All marked out now we’re going to start working our way up and marking out where the balcony is so now let’s start with the smooth court stairs i’ll head on over here towards the left i’m gonna look at this block so we’re just right above where the anvils are

I’m gonna work my way up until we’re lined up with the seventh block so this is going to be one two three four five six and seven so now on this layer we’re gonna go in between all the pillars and just add these upside down smooth quartz stairs

Make sure to also do this part right here in the middle that juts out so now on that seventh layer we have all those upside down smooth quartz stairs and now below that we’re going to have a set of smooth chord stairs facing up And now on top of that we’ll switch to the anvils and place all these for the railing and now at the same layer as the top stairs we’ll fill this all in with the quartz bricks so it’s all filled in like that so this is the main floor here for the balcony

And now we’ll go underneath here at the same layer as the bottom stairs and we’ll fill all this in with a layer of full blocks of the smooth quartz So now all of that is filled in for the bottom and for the top now all the way here at the very top let’s start marking out the rest of the overhang for the roof so you can switch back to the smooth court stairs i’ll just head on over here towards this

Right side you can see we’re just going to continue on right next to that set of the previous stairs we’ll bring this over until we’re lined up here where this pillar is we’ll have the slab in the corner and i will continue with the stairs all

The way up until the pillar that juts out and we’re gonna place it right up against it right there we have a slab in that corner and then we’re going to have another stair and a slab so we’re gonna have a triangle point going up here so on this side once again

Just a stair and a slab slap on this side a stair and then we’re gonna curve into that and continue on and then here is this corner another stair or my bad slab and then the rest of the stairs so there we go we have the overhang all marked out

Now with the full blocks of the smooth quartz at the same layer as that overhang we’re gonna start filling in all this space in so it’s gonna be like the ceiling for the balcony so i’ll just start over here right in between these pillars just fill all this in

And then here where this part is just once again in between these pillars you can just bring it straight across right there so don’t fill in in between these slabs just make sure one block behind them right here So there we go all of that is filled in at the same layer as the smooth chord stairs for the overhang and now let’s start marking out the little shapes that we have they’re kind of like arches in between all the pillars here at the top

And for the bottom so we’ll start with the full blocks of the smooth quartz and i’ll just be up here at the top and like i said just in between all the pillars we’re going to be adding some arches so just up against each pillar we’ll

Have a full block of smooth quartz like that so we’ll do that in between all these other sections And now in between those full blocks we’re going to have just some upside down smooth quartz stairs And now underneath the full blocks we’re going to have another upside down smooth quartz stair on its side so that adds the arch so now we have all of them marked out here for the top we’re going to go down at the bottom and do the exact same thing So there we go now we have that bottom section and all of this is looking pretty good now i’m going to use is the sea lanterns and the iron trap doors and this will be the main light source for both the balcony and the porch area

So the switch to the sea lantern and i’m just gonna place them maybe one right here lined up where this pillar is so i’ll just place it like that we could have maybe another one right here we’ll do the same on this side And that should probably be good we could have an extra one right here in the middle we’ll then cover all these up with an iron trap door and that’s about it for the bottom section we’ll go up here to the balcony and we’ll do the same thing

Uh that’s actually it for this entire balcony porch area that’s all we’re gonna do for it now we just have to do the rest of the roof back here so we have a triangle point here where this piece juts out we have some slabs to

Then cover up is the balcony and that we have all the texture and windows in the roof so you can switch to the smooth court stairs and we’re just going to go in each corner start bringing it up so we just have to stare like that upside down on its side

And that just back and forth the middle point will be just right here in the middle so that side is where it should be we’ll then bring up this side to the same height is that we have a stair topped off at the slab and now behind that you can switch to

The full blocks and we’ll just fill all of this in for this little shape Now let’s gather up all the blocks we’re going to be using for the roof so just kind of organize this a little bit so we have the well actually we already have the stone brick stairs so we’re going to continue with the cobblestone stairs for the extra texture

We need the stone brick slabs and the cobblestone slabs for the balcony roof oh wait no we still need the stone brick stairs for the part of the roof right here where the shape is so i’ll just mark out where the roof here for the triangle point is

First and that will make adjustments for when we start adding the slabs for the balcony so i’ll start with the stone brick stairs i’m just going to go right into where this court stair is we’ll bring it all the way towards the back into the main part of the roof but then just

Delete that so now you can see it all curves together we’ll do the same on this side we’ll delete that one and then you could go ahead and delete all the remaining ones here in the middle and i will work up on the next layer and do the same thing

Instead i’ll just delete all these blocks here in the middle so it then just curves together on each side and we’ll do it again and now we just have to do it one more time with the stairs is that we have a set of slabs So that is the triangle point and now we’re going to work our way up with some slabs into the main part of the roof so we’ll continue with the stone brick slabs now just start down here at the bottom right on top of the overhang we’ll bring this over

And then just curve it into that part of the roof there we’ll do the same on this side and now on that same layer we’re just going to go ahead and add another set of the slabs so it’s going to be two spaces here for this first layer like that And now we’re gonna go up in the next layer so a half a block so what we’ll do is delete these two stairs we’ll replace it with the slabs and then we’ll just continue this along work it out and then you could bring this over into the triangle point

And you’ll then have to delete the two stairs right here so just fill that in so there we go it all just flows together nicely there’s no holes or anything like that we’ll go on this side we’ll do the same thing and now we’re going to go up one more time

So you can see all these stairs right here we’re going to delete as well as for the extra two here we’ll do the same on this side and now we’ll fill all of this in here for the final layer so there we go all of that is now filled

In so just some slabs there we have the triangle point that leads into the main part of the roof so now i’m gonna go through with the cobblestone stairs and at the slabs and add all of the extra texture here for the back and for the front so i’m just gonna go

Through and do all of that and i’ll see you guys once i have it done i went through and added all the extra texture i don’t think i missed any spaces i did also accidentally delete a couple in the site blocks but i think i replaced them all

So yeah we should all be good and now the final thing i’m going to do here in this video which will finish off the main exterior of the house it’s going to be all the windows and the roof so we have a total of eight up here on

The roof for the second floor is that we have three over here above the garages and then two over there so i’ll show you how to do the two over here and then it’s going to be the same exact design for the windows above the garage

And then we have a little bit of a different design for the windows up here on the roof on the second floor so i’ll show you how to do two right here and he said i’ll do the other six like fast forward through those oh yeah i almost

Forgot there is one little feature up here at the very top kind of like a decorative chimney so let’s go ahead and grab the full blocks the smooth quartz and the smooth quartz stairs so i’m going to leave a space of these stone stairs here away from the quartz overhang

I’m going to delete the four blocks i’ll fill it in with the smooth quartz blocks add an extra layer on top of that and then i’m gonna have a set of upside down smooth quartz stairs all curving together here Like this and we’ll do the same thing over here on this side So there we go and now this one is done so now i just organized the inventory a little bit so these are all the blocks we’re going to continue using for the rest of this video so everything for the windows in the roof and i’m going to

Head on over here towards the right and we’ll start marking out the windows in the roof right here so i’m gonna skip over two spaces here down at the bottom and he said i’m gonna leave two spaces of the stone stairs here at the right so we’re gonna start

Here we’ll carve out three so a window is going to be there and then we’ll skip over these three spaces and carve out another three here so that’ll be another window so we have the full blocks of the smooth quartz we’ll just go here behind these stairs and fill in these three spaces

Anything with the pillar quartz blocks will go up on each side and i’ll just go ahead and do this window first so we have the three pillar quartz blocks there and another three here we have an upside down smooth quartz stair at the top in between them and

Then in front of these pillars here at the top i have another upside down smooth quartz stair and then a stair up against that on each side and is that a stair on top of that an upside down smooth cord stair here in the middle topped off at the slab

And though i have two slabs on each side underneath and then we’ll go ahead and start deleting more of the roof so we’ll delete these three stairs the other set of three here is that we’ll go up one more time and delete that and now let’s switch to

The stone brick slabs we’re gonna place one right behind the quartz slab here so just right up against that pillar on each side and then on top of all this we’ll go ahead and have some stone brick stairs going into the roof here or like into the overhang so we’ll bring this over

Into the roof on that side we’ll go over here we’ll do the same thing and that will go up on the next layer do it again and then the final layer here is going to be some stone brick slabs and we are actually going to need the cobblestone

Slabs so i’ll grab those again anything i will go here on the inside we’re going to replace this little spot right here with a smooth quartz block so we’ll just fill that in so it’ll have that little hole and now the remaining two spaces here for the window itself will be the white

Stained glass panes and that is it here for this window in the roof and now i’m gonna replace some of the cobblestone or my bad some of the stone brick slabs here with the cobblestone slabs like that and then i’ll replace some of the stairs with the cobblestone stairs

And i’m not going to really worry about all these stone brick stairs right here underneath i’m just going to leave those as it is it’s not really going to be too noticeable is that i’ll go over here on this side replace some of these stairs

And there we go is that is is the first window i’ll show you how to do it one more time here and then i’ll mark out where the three over there are going to be and then i’ll just fast forward through them well actually it’s a bit different here

Once you go up against this part of the roof so maybe i’ll show you how to do this one and then i’ll fast forward through that one and that one we’ll see but anyway i’ll show you how to do this one so it’s going to be the same as that

One we have the three pillar quartz blocks on each side upside down smooth quartz stair in the middle and then one in front on each side one on the side and on the top upside down in the middle topped off of the slab two slabs underneath on each side

And then we’ll go ahead and start deleting some of the roof so we’ll delete these three these three and then one more time and then we’ll grab these stone brick slabs we’ll place this right behind the quartz slab and then we’ll start filling all of this in with the stairs

And that we have the slabs and then let’s go on the inside we’ll fill this in with the full blocks of the smooth quartz we have the white stains glass paints and is that we add all the extra texture so now we have that second window all done

We’ll head on over here to this side it will mark out where these are going to be so all these windows are gonna be lined up right down the middle of the garage doors so we’re gonna skip over the two spaces of the stone stairs here

At the bottom so we’ll go here on this third space we’ll carve out three so now you can see we’re just right down the center of the garage door just lined up with it so we’ll do the same thing right here so we’ll write down the center of the garage door

We’ll skip over these two spaces we’ll carve out the three right there and now we’ll do it one more time so there we go and now for this window over here there’s nothing special about it it doesn’t go into this part of the roof so this window is going to be exactly like

Those so i’ll just fast forward through that one and then for the other two it goes into the curve of the roof here so i’ll show you how to do this one and that i’ll fast forward through this one since it is slightly different because of the shape of the roof

So i just want to reassure you how it should be so we have the full blocks of the smooth quartz we have these three right there is that we have the three pillar quartz blocks going up on each side upside down smooth quartz stair another one in front of each full or in

Front of the pillars and then we have one on the side and on the top and then the upside down one in the middle with the slab two slabs on each side and now we’ll start deleting some of the roof and this is where it’s different

So we have the set of three here we’ll go ahead and do this other set of three and then i think we’re just gonna be deleting the one right here in the middle so we’re gonna have to kind of fix this stair right here and make sure

These all flow together nicely into the curve so let’s go ahead and do that you can switch to these stone brick stairs oh wait you know what let’s do the slab right behind the quartz slab so i’ll go back over here we have the stone brick stairs we’re just going to

Curve it right into that part of the roof so you can see we just have the two additional ones go up on the next layer we have three here and that’s really all there is to it that’s about it’s just a little bit different here so we’ll go over here on this side

Bring this over curve it into it go up in the next layer right there and then the rest of this is just the slabs so i add all the extra texture go ahead and replace some of these So there we go and now just flows right into the curve of the roof here that’s all the difference there is let’s add the Smooth quartz block here on the inside and then the white stage glass panes there we go so now i’m just going to fast forward through these other two So i now did the other two windows right here and now we have eight more windows to do but they’re going to be a little bit different than these ones so you can see how these are just one block wide where the glass is for the actual window

The ones up here and the roof on the second floor are gonna be two blocks wide and they’re gonna be lined up where the windows are for the wall so we’re gonna skip up these two spaces and we’ll carve out four right here so you can see we still have the two stone

Stairs here at the left and the four spaces are lined up where that window is so we’ll do the same on this side we’ll skip up these two and then we have the four right there so they’re just three spaces apart here so we’ll do the same on this side And then we’ll do it here at the back as well so we’re gonna have to kind of be so let’s see we have the four spaces there so just line up with that so we have the two spaces at the left we can’t really see the two layers of the stairs

But we’re gonna be able to still see the one right here so we’ll carve out the four so we’re right here on this layer you can still see the set of the stairs and then uh we skip over three spaces carve out the other four right there so it’s all lined up

We’ll do the same on this side so it’s gonna be right here so the two spaces one at the bottom skip over these three have another one here so i’ll go back up to the front i’m gonna show you how to do maybe just this one right here

And then i’ll fast forward through all the others it’s like the same exact thing we just did it’s just an extra space where the glasses so we have the full blocks of the smooth quartz we’ll fill in the four and then we have the pillar quartz block going up by

Three on each side and so we have the two upside down smooth quartz stairs one on each side in front of the pillar and then one on the side of the stair and on top if they were just going to have two upside down stairs behind that if they

Had two facing up into each other for the top and then we have the smooth quartz blocks right here switch to the smooth quartz slabs we have two underneath on each side and then you can start deleting some of the roof so we’ll delete the four here another layer of the four

And it’s able to leave two more here And then you can switch to the stone brick slabs we’ll place these behind the quartz slabs if they will start filling in the roof so you could switch to the stone brick stairs we have two here then we go up on the next layer we have three

Do the same on this side so we have two three and then we’ll place another four right here for the top and then four over here and those stairs actually just curved right into each other so that worked out pretty good now we’ll go on the inside

And we’ll add the smooth quartz block the four white stains glass paints and then we just have to go through and add a little bit of extra texture with the cobblestone stairs that is this window design so similar to the others it’s just one block wider so

I’m just gonna do that seven more times and i’ll just fast forward through it all i have all of the windows now done in the roof and that completes the main exterior of the house so we still have to do all of the landscaping but for the house itself

It is now all done so this is what it’s looking like we still have to do all the interior as well but for the exterior here it’s done so i’m gonna leave it at that here for part three so in part four we’ll be doing all of the landscaping for the

Front and the backyard all right guys that’s gonna be it here for part three for this tutorial on how to build this mansion if it helped you be sure to please leave a like subscribe for more and i’ll see you guys in part four