Gaming On Caffeine – Minecraft Levitated | TRADING WITH DRONES & MAKING PLASTIC! #11 [Modded Questing Exploration]

In the last stream chat we were working mostly on building the oil pump jack we do now have 17.4 buckets of oil and uh presumably if we throw a little bit of uh fuel into the old generator there we should start getting a bit more oil we should be able to fill

Up that tank there fairly quickly and we were also working of course on setting up the improved blast furnace and automating the production of steel so we now have thankfully 89 steel ready to go and the reason that we need so much steel is because if we’re going to get

Into mastercraft a lot of the machines and blocks from pneumatic craft require compressed steel ingots and as we showed at the end of the last stream compressed steel ingots are made by blowing up regular steel ingots and on average you lose about 20 of your steel ingots in the conversion

From steel to compressed steel so i think in the last stream we did get a few compressed steel ingots yeah we have 10 and if memory serves me right i think someone told me we need about 34 if we’re going to set up all of the infrastructure required to make plastic

Which is what we need if we’re going to start getting in to some of the better machines and into some applied energistics too so in that case chat let’s try maybe doing like half a stick half a stack if we lose 20 means that we’re going to

End up with approximately 25 or 26 steel ingots plus the initial 10 should take us to 35 or 36 which i think is fine i do want to keep like a decent amount of steel on hand for some other crafts that we might do later on down the line

Um so for now all we need to do is craft up one more tnt and one thing someone did recommend in the last stream is using the tiny tnt here from applied energy 62 because it does require less gunpowder it does on the flip side require another one another quads but

Now that we do have the uh conjuring catalyst we can duplicate under the quads um at the cost of a very small amount of mana and so essentially chad all i’m thinking is that if we go ahead and run that through the old sag mill there that should get us

Two sodas quartz dust we can then craft that up with two gunpowder which of course we get from our flint and we should be pretty much good to go so two nether quartz dust and two gunpowder gets is one tiny little tnt and then if we grab that alongside let’s

Say like a button i guess it’s probably the cheapest redstone implementation we can use here and then if we go and throw down half a stack of steel we should hopefully get about 25 or 26 compressed steel ingots here boom boom and boom it worked nice

So um i don’t know what we were at before but we now have 37 compressed steel ingots which should be more than enough to get all of our machines here up and running so the first thing that we’re going to do chat is we’re going to turn our oil from

Oil into lpg so our lpg this stuff here is made by running the oil through the thermo-pneumatic processing uh sorry it’s made by running the oil through the refinery and as a byproduct we are going to get diesel as well for now we’ll store that diesel

Going forward we could put it into the likes of a compression dynamo uh we could also put it into a combustion generator a diesel generator there are all kinds of things that we can do with it we can even trade it for some emeralds which we might end up doing

Later on in today’s stream um unfortunately i think all of these are a little pricey right now like in order to get the uh combustion dynamo we need a dynamo frame which requires the industrial machine chassis which we can’t make until we’ve done all of the stuff with the amatecraft so

We’re going to have to hold off on that for the moment and also the diesel generator from tech reborn i think is maybe even more expensive and has yet more things that we currently don’t have access to like refined steel ingots um you know we need all kinds of stuff

That currently we do not have so for now we’re going to store that in the tank or we’ll come back to it in the future but to do that we are going to need two refinery blocks i mentioned it a bit in the last stream but depending on how many refineries you

Stack on top of each other that will determine what resources you get out of your oil and if you want to be super efficient you can put four down and get some creasing and some gasoline for now though i think we’re gonna go with the two and get diesel and lpg so

The refineries thankfully are fairly easy to make they require six compressed steel ingots one diamond and two glass sir glass two diamonds and then our compressed steel ingots should nice and easily get us to refineries nice those are gonna go down for now i think probably

I don’t want to do this chat i think i’ll put them down maybe like here and here we’re going to end up with a bit of a janky setup here chat but um essentially i just kind of want to get down a proof of concept to see if my

You know system is going to work and then we can kind of move some of this stuff around and maybe move it into a building of some description later on down the line once we have our oil in the refinery after that we want to pump the oil or the lpg

Through and over into the thermo-pneumatic processing plant which requires yet more compressed steel some glass some redstone and a pressure tube the pressure tube is very easy to make it is get more compressed steel as well as some glass so i’m thinking i should probably check

If we have some sand uh go and throw that into the old furnace and it would appear that we do not have any sand that is fine we can get some just because it looks like we might need more glass than we currently have so if we grab some redstone over here we

Should now have i think pretty much everything the pressure tubes are also going to be used for some other uh crafts later on down the line so making you know more than uh one of them is completely fine we do not need four processing plants here one will do is just fine

And then finally once we have the um lpg in plastic form so the lpg is going to get turned into plastic in the thermo-pneumatic processing plant once we have that plastic we can then run that into the plastic mixer which is going to allow us to make

The the plastic sheets required for all of the pneumatic craft recipes so the plastic mixer is once again you guessed it yet more steel and get more glass or fairly easy once you have the compressed steel the hardest part is just getting that initial bit of compressed steel up and running so now

Chair what we need to do is we need to grab some fluid transfer nodes right now we have one we might have to make a few more here actually we are definitely going to have to make a few more here that is fine thankfully they are rather easy to make we need a

Bucket some stone and some redstone there we go so now that we have some fluid transfer nodes chain we’re going to pump the oil from our oil tank over and into the refinery like so we should see that fill up on the left now i believe

That that is going to turn into diesel and lpg i’m fairly certain that these tanks here correspond to the refineries so i’m fairly certain the diesel is going to come out of the bottom refinery and lpg out the top so we want to do something like this and like this

For now like i mentioned the diesel is just going to go over into a tank and be stored over here somewhere the lpg we’re going to send into the thermo-pneumatic processing plant now the way that these machines work is they don’t require power but they do require heat

So you’ll see right now it says temperature 19 degrees celsius required temperature 100 degrees celsius so we need to get this quite a bit hotter if it’s going to uh to work and the same is also true of the thermo-pneumatic processing plant here this also requires a much higher temperature

In order to generate plastic i think if we actually look in a jei here it might tell us what we need yeah so once again we need a temperature of 100 degrees celsius so the reason why i’m putting this solo down is because we’re gonna have a block of

Lava here that is going to heat up both the refinery and the thermo-pneumatic processing plant there are a few ways you can do this if you look at the heat tab here and it does say this machine requires or produces heat heat can be applied by placing a block

Next to the generator that generates heat i think the vortex tube fast but requires power but also lava slow and torch is very slow to cool down a machine you can remove the heat etc etc so my plan is to put down obsidian oh sorry put down lava underneath the um

The refinery here now there is a slight caveat there in that the lava will eventually turn into obsidian if placed under the refinery but chant that shouldn’t be too big of an issue i think we can work around that with a little bit of automation so um i do believe in my

Somewhat open shulker chest here we should have lava we do indeed for now if i go ahead and make sure this is set to empty and we put the lava down like that what we should see is we should see this machine going up in temperature you’ll see this temperature has well exceeded

100 degrees celsius and it is now turning our oil into lpg and diesel the lpg should be headed down here it is indeed and this is also well above its required temperature and so should as soon as we get to 100 ml buckets begin producing plastic the plastic is made in uh 100

Ml bucket increments i think it might be the case that 100 ml buckets of lpg equals a thousand milliliters of plastic which is very nice indeed uh let me quickly whip up a tank chip so we can actually store that diesel otherwise our system is going to stop working fairly soon here

The tank shouldn’t really be too difficult for us we have made a few of these so far and they’re not bad or whatsoever we’ll throw it down right about there so that should hold the diesel it does indeed and as you’ll see the lava has turned to obsidian so it’s not great

We didn’t quite get um our first bit of plastic there and of course by the way all we’re going to do here is we’re going to do the exact same thing with a transfer node going up and into the the plastic mixer i think we’ll do it one block over just

So we don’t connect with these pipes here uh the plastic mixer thankfully does not require any uh heat i don’t think it does say heat but i think you can make plastic maybe just like room temperature yeah you’ll see none of these recipes here have like a specified heat

So i’m pretty sure that you don’t need heat around the plastic mixer to make these like plastic sheets so yeah the obsidian is turning the lava is turning into obsidian let’s go ahead and break that my plan here chad is to uh to utilize a few things first things first i’m

Going to put down um another minor from extraterrestrial uh that minor is going to be used to break the obsidian whenever obsidian is present so once again at the minor there a pretty easy machine that to make does require a dropper but that’s easy enough we also need a three iron

And two sticks to make another iron pickaxe as well as one more resonating redstone crystal which should just be a little bit of n chart combined up with some redstone boom we have another minor nice despite the fact that you only use a lion pickaxe to make this this can indeed mine

Obsidian so if we put this down right about here and that will go ahead and uh collect and break and collect any obsidian that we that we use and therefore also give us a nice like passive source of obsidian going forward which is pretty nice but now my plan

Going forward here is to uh set up a system that places down lava automatically into this uh the space here again we don’t need it going forever like it doesn’t have to be infinite uh we can of course you know go to the leather fill up aggressive wall

With lava come back deposit that into a tank and then let this you know work and make you know multiple buckets worth of plastic that we can then use and i think that’s gonna be fine for now so to do a chat i want to use a add-on mod for integrated dynamics called

Integrated tunnels because integrated tunnels adds some pretty nifty items specifically we’re going to use the world fluid exporter which allows us to place fluids in the world and we’re also going to go ahead and use the world fluid uh but not the world we’re also going to go ahead and use the

Fluid interface which attaches fluids at two of the network with these two items we should fairly easily be able to automatically place our lava down we are going to need one more tank but again that should not be a problem here we do have once again all

Of the stuff i believe to make it apart from just a little bit of of glass but thankfully we did start smelting that up just a few minutes ago so now getting another tank should not be too difficult good stuff so let’s have a look to make

The fluid interface it’s a pretty easy recipe it needs one bucket and then some crystallized mineral chunks right now we have 12 crystallized mineral chunks so that is very much adorable you do get four of these which is nice and then the world fluid exporter is a fluid exporter

Which does require that fluid interface we just made with an output variable transformer which requires a piston so we’ll get some stone some wood some redstone and some iron that should go and get us everything for the piston and then we should i believe have variables left over from

The previous stream we do indeed we’ll grab those that’s going to allow us to make this output variable transformer although in fact actually chat we should have some of those left over right because we did make those before as well we did indeed so never mind

I do not need those might as well save the manual where we can and then finally in order to actually make the world fluid exporter we just need one logic director this is made with one diamond six crystallized chorus chunks and then two crystallized manual chunks so the chorus chunks

Are made by throwing the popped chorus fruit through a mechanical squeezer right now we do not have any popped covers fruit however i believe we do have i don’t remember we do have popcorn through oh we totally do how much do we need we need maybe like three

Depending on how lucky we get so if we don’t run this through the mineral uh through the mechanical squeezer you can get these by the way just by smelting coral screws so they’re not particularly difficult to uh to come by i do think we have to take out the resin here though first

And so let me actually do i guess something like this to hopefully move that that over and that should get us more uh resin in the process so once that is empty we can go ahead and put our popped covers through in that should hopefully begin producing these crystallized

Mineral chunks six is all we need so if we grab those and come back over we should now check have everything that it takes to make the logic director and therefore by extension the fluid exporter so we are going to need once again some more cabling and i think we might

Potentially have some cables left over we do indeed so all we’re going to do here chad is we’re going to have a tank and this tank is going to be where our lava is kept our lava is going to go down right here so i’m going to put a piece

Of cobblestone there for the moment and turn off the miner that’s where we’re going to put our world fluid exporter right there we can then get rid of the cobblestone and attach this up via cable to this tank so the tank i think we’re going to put

Let’s say right uh i kind of want to put it right here actually so let’s put the tank right there the tank is going to hold the larvae the tank needs the world at the fluid interface so we’re going to put the fluid interface right on the tank so not there right

There like that and then all we have to do is connect those two up with cabling and now the world fluid exporter is connected to the fluid interface the fluid interface is going to be where our lava goes like so and over here we have a bunch of options for placing the fluids

Into the world now you can get quite technical with this much like we’ve kind of been doing with our setup over there where you can work with variables and you can do like you know if this equals this or if this doesn’t equal this then place the lava

Or don’t place the lava or you know whatever it is we could for example have um some kind of reader on the plastic mixer and we could say if this is full of plastic don’t put the lava down that wouldn’t really help us too much i don’t think but it

Would maybe save us a little bit of lava if it still turns to obsidian even if it’s not working so you can do stuff like that for now we’re going to go with a very basic system all we’re going to do is take one of our blank variables and put it into place

All fluids because this is just a symbol boolean which means true or false and as long as there is a variable in here it’s going to place any fluid on the network in our case that should do what i should do is just place the lava so essentially all we have here chet

Is a system that will place any fluid connected viral fluid interface to this world fluid exporter so all we have to do is quickly head on through to the nether grab as much lava as we can put it into the possible tank and then that lava will be automatically placed down by the

Fluid exporter and then when it turns to obsidian the obsidian breaker won’t break it or the miner even will break it store it internally and another bucket of lava will be placed down nice and that should continually produce lpg all right and we should just be able to uh

Let’s do film mode and then just grab some lava beautiful and then as always we could do a quick slash home and if we really wanted to we could then do a quick slash back as well let’s get back there there we go and so yeah if we go ahead

And turn that back on this should i think chat worked quite nicely now one other factor to bear in mind here is that uh if we go and we look again at warnings here we’ll say our machine is poorly insulated 5 of 12 block faces are exposed to the air which wastes heat

Ensuring no neighboring blocks are air blocks to insulate the machine for better performance so it’s going to look bad but what you can do to increase the amount of heat being kept in the machine so to effectively increase the temperature which you’ll notice right now is hovering around 127 if we cover

The remaining faces that don’t currently have something attached to them like this and we now look inside you’ll see right now there’s a tick no problems and the temperature has gone right up to 192 degrees 195 degrees celsius so it looks horrible but it does work this machine here is

Already fully covered on all sides so this one is already reaching it’s uh it’s kind of optimal temperature there and the final thing we need to make this work is call you need call at the top in order to turn the lpg into plastic the recipe right here does

Show a little bit of coal right there as of right now we currently have seven coal however uh we did learn in the last stream that we can duplicate this call uh using our countries catalyst here which is hopefully going to make getting more coal nice and easy for us

Beautiful and i think we probably do also have more in here as well we do nice all right so over here chad all we need to do now is throw that down in here that’s going to start making the plastic that plastic is then going to run over

Into the plastic mixer and we are now ready to start generating plastic so we uh actually might need like a bucket of lpg if we want to uh complete that quest which is a little awkward this uh advancement here but it’s fine we can always come back to it in the future

So i think chat we need to now pivot back to the uh the pressure chamber there’s a quest here called pressurized assembly it says you need machines to print circuit boards after all assembling them in a dust free environment would be ideal craft a pressure chamber wall so the pressure chamber wall

Is pretty easy it’s four compressed steel with four stone burnt both of which shouldn’t be too difficult so all we need to do chat is get some stone and throw it into the resonator now one thing that people have been recommending for a while is uh putting auto smelt onto my pickaxe

My pickaxe just have four modifiers free and what we can do is if we i think if we add a firewood part we can add auto smelting to our pick by default something i might replace the wooden rod that we currently have with a firewood rod

The idea being that what we can do is we can just put down cobblestone and then mine it with a firewood rod to instantly turn it into stone as opposed to handling to get the cobblestone put it in the furnace and wait for it to smelt

Using our fuel and so i think that’s probably what i’m going to do here we do already have the uh end iron ore available so getting more of that firewood really shouldn’t be too difficult here chad of course all we have to do is throw that into the old mana pool

And then right click that onto a a one wood plank right nice we might need two of these to make a tall one i’m actually not quite sure let me go and check oh no one seems to be fine so you’ll see that that does have the alter smelts

Modifier and then if we do this and this that is going to lower our durability a bit but i think that’s okay it’s also going to get rid of the ecological bonus which right now is giving us kind of a passive um regeneration on our pickaxe but given

How easy it is to make more end stern uh what they call check more endstone sharpening kits i don’t think that’s gonna be a problem so if we take this and we put down our cobblestone we can then just break this and get actual stone and because we have look we

Actually sometimes get more stone back than cobblestone we put down now the person that recommended this in the youtube comments or the comment i saw did recommend using a hammer for this which would definitely make this much better because you can mine in a 3×3 area as of right now we don’t

Have a hammer we could make one obviously but for now i think this is fine it does make it a lot easier for us to get stone it also has the added side benefit of course chat of allowing us to uh kind of skip out on the uh the or processing

Side of things because now if for example we go over to the iron ore that’s down here when we mine the iron ore it’s going to directly turn into iron ingots so mining that gave us two iron ingots right out the back we didn’t have to run it through

The mechanical squeezer or the sand mill or the furnace we can just instantly smelt it down into the two ingots which is super nice and it’s going to make our mining uh just that much more efficient going forward as well which is very nice indeed and hopefully as well we’re

Hopefully going to be fairly close actually to getting the excavator modifier at which point uh the hammer kind of becomes obsolete because at that point we can put down as much cobblestone as we like and then just vane mine it all or excavate it all using that ore excavator

To get a ton of stone so a little bit of stone burnt later we should now have what it takes at least to make one set of uh pressure chamber wall i’m gonna make another one because i’m fairly certain we need at least 16 possibly more because the pressure

Chamber chat is a three by three multi-block from pneumaticraft so if memory serves me right we do have to have essentially a full 3×3 much like the blast furnace and the coke oven but with the center block empty and in order to actually form the multi-block

I’m also fairly certain we need at least one of these guys the um pressure chamber interface oh no we need at least one pressure chamber valve in order to actually make the multi block uh the virtual chamber interface just makes the uh the multi block easier to use

So the interface is you guessed it compressed iron but this time with a pressure tube and we actually are out of compressed ions we are gonna have to make some more um oh no actually we can make it with the pressure chamber wall i guess because we don’t need that many valves

And then the pressure chamber interface is a hopper and a wall okay that actually seems very doable so if we pick up five of these i do think we are still going to maybe need more uh compressed steel chat i think we are pretty close but uh for now if we do

One of these that’s going to get us the pressure chamber valve and then if we grab a hopper real quick we should be able to make ourselves a pressure chamber interface nice and that’s going to be the next advancement taken care of there good stuff

So next it’s time to make a pretty clean board which for those who don’t know is definitely what pcb stands for it says to make a pcb you’ve got to start with an empty one craft an empty pcb so i will come back to that in just

A second here for now let’s grab our stone burn and let’s make some more wall here and yeah i think we’re gonna be a little shy i think we have to get at least three more compressed steel but the idea chant is that we have a full three by three

Multi block here with the pressure chamber valve i think anywhere in the multiblock we’ll do for now i’ll put it right there um but we do also have of course the pressure chamber interface which for now i’ll put down um right at the top actually we’ll come back to the pressure

Chamber interface chat for now let’s get enough pressure chamber to fill this in so if we fill in the missing pieces here it should form pretty much instantly into the multi block it does indeed you don’t need this bit here so this is our pressure

Chamber now in order for this to work we actually do need pressure and i think if i’m not mistaken the easiest way for us to get pressure is via the use of i’m looking for it in je i don’t see it this guy right here the air

Compressor so this allows you to turn fuel into pressure this machine is used to generate compressed air to do this insert solid fuel item that can be burned in a furnace in the fuel slot no fuel buckets will not work use a liquid compressor for burning liquid fuels so once again

A furnace another pressure tube and more steel this time we should have everything it takes to make that and the only thing that we’re currently missing i guess is enough end stone to make a an end furnace beautiful and boom and we also do need pressure pipes to actually connect that

Up but that should be fine for now i guess we’ll go and use wood because we have so much of it and it does work as a fuel source and i believe all we have to do here is connect this up to the pressure chamber valve

And then connect that up to the air compressor make sure you do put it down in the right place otherwise it won’t work there we go it does connect on the back here and this should if we put fuel in here begin to up the pressure

And therefore up the pressure in here so the next quest wants us to make a pcb the pcb is made in the pressure chamber with one compressed steel ingot and one green plastic so that leads us nicely back around to the plastic mixer you’ll see on the right we’ve got item

Selection we want green plastic oh yeah green plastic now to make that we do have to put dyes in on the right hand side here and i believe even though green plastic is only going to use green dye i think we do still need to have

At least one of each color of dye in there so the three colors being red blue and green red we have oh blue we have all this i guess i think you can use i don’t know if you can use mystical petals actually let me uh let me check

I don’t think you can i think you have to use rose red which is a little less than ideal but is perfectly oh we actually don’t have any that makes it a little more dicey we might have to get some uh grass down chat and do a little bit of

Bone mealing to try and get some more uh some more red dye and we could also use beetroot that is very true um right now we don’t have beetroot seeds but i believe we did have them um like they’re in the crafting chain of getting watermelon seeds carrot from

Potatoes and potatoes from wheat right yeah so we can run some wheat into uh into beetroot which i guess is probably worthwhile that’s probably a better way of getting red dye going forward rather than trying to uh to get poppies every time so wheat potato upstairs or carrot carrot beetroot seed

And then my real herpea chat is that uh the beetroot seed works with the watering can if it doesn’t this could be a bit of a pain but i’m really really hoping it does so we’ll go ahead and i guess we’ll do this over we have like a little

Kind of makeshift farm back here right yeah i guess we’ll put the b2c down like there and then hopefully increase that growth speed it works nice okay cool it’s not super fast by any stretch of the imagination but it does work and should any second now guess be true nice

And for now we’ll just take the one and then we’ll also grab one of our cacti as well which i think i hide now in here somewhere they already do we have nine that’s of course going to get us a green dye just as soon as we smelt it

I do actually wonder chat if we put this down and break it with our pickaxe does that auto turn into green dye no it doesn’t okay that would have been nice to know i was wondering if the the auto smell effect worked on cactus unfortunately uh it does not

Either way so now we have red blue and green dye chat all we have to do is over in the old plastic mixer drop in the red the blue and the green will do all of each for now uh so you’ll see these little bars here

Are filling up on the left and then if we just click on green plastic it should take i think a thousand buckets of liquid plastic and turn it into a green plastic nice and you could lock the selection at which point it would uh continue making the selection until it ran out of

Plastic for now we’re not gonna do that because we don’t want to use all of our plastic just yet but that does get us one uh green plastic chat so now what we should be able to do is we should be able to take and this is actually where um a a window

Would be useful so you know i might actually go ahead and craft that up with a piece of glass can i just craft it with one i totally can okay so let me go grab chat one piece of glass the benefit here it allows you to see inside of

The chamber as you can kind of see when your reaction is is done so essentially the the basic unautomated way of doing this is that you are breaking through the top or through any side i guess and you put in the items required so in this case one green plastic and one compressed

Steel you then close it back up you can see our stuff is in there doing its thing not gonna despawn over here we can then begin to put fuel into the air compressor i feel like we might as well use charcoal given that we have so much of it

There we go that’s gonna start bringing up the uh the pressure bar here and if we look again at the recipe for the pcb we need the pressure to be about 1.5 bar so just on the line between green and yellow there is where we need our pressure to be

This guy should be able to produce that pressure i’m pretty sure you’ll see right now his pressure is at 0.2 bars so it might take him a minute to get up there um and then once it gets up to 1.5 bars of pressure these items should basically just be transformed

Into the printed circuit board at which point uh we can then break the you know a block again and take it out the problem with having to break and replace the blocks every time is that you lose the pressure inside the pressure chamber whenever you break the blocks right

That’s where the interfaces come in because they allow you to put items in and take items out without having to break the blocks which means you don’t lose the pressure every time you work through a uh through a craft so we’re gonna have to use that most certainly going forward but

Once we have our circuit board champ we do need to take a bit of a detour here notice the the advancements kind of circle back around like this and then over to the micro circuit and that’s because i believe that if we’re going to make a um an unassembled circuit board that

We need a light box and the light box does require a pcb blueprint and the pcb blueprint is only obtainable through the amadron tablet which is also how we get into applied energetics as well so we are going to take a quick detour there you can as well by the way i

Believe put multiple of these air compressors down to increase the the pressure faster right now i think one’s gonna do us just fine okay so actually very close now to 1.5 bars we’re about 1.47 1.48 oh if you press shift you actually see it’s uh in the left there that’s

Interesting you can see the gauge but then we’ve got 1.5 bars and you’ll see that it made the pcb nice so for now i’m going to take the charcoal out of there and you’ll hear the gas escape as we break that and if we quickly put it back we should retain

Some of the pressure you’ll see we are still at 1.41 there so we could make another set um fairly quickly i guess if we wanted to make another one but that is that quest complete so the next one here says at this point i’m pretty sure you can build a pcb

On your own if not you still have a manual to refer to craft a pcb so going forward chat if we’re going to progress on here we need to get this tablet here um it says some technology is simply unobtainable on this wasteland so don’t be afraid of spending your money

That is if you have any craft an amadron tablet amadron tablet so this guy right here requires a bunch of grey plastic as well as a gps tool and an air canister the gps tool is more plastic with a diamond a glass pen and a redstone and then the air canister is a

Pressurized tube some compressed steel and some redstone so we actually have what it takes already to make the air canister that’s easy enough i will bookmark this and i’ll also unbookmark basically everything over on this side now because we’ve made most of it i am fairly certain chat that we’re also

Going to have to get one of these guys the charging station to actually charge up the tablet this allows you basically to transfer pressure from things like the the air pressurizer that we have over there into the amadon tablet which is going to allow us to uh to get

What we need for the other uv light box now while we have that too it smells up we need what seven grey plastic let’s go see if we have what it takes to make that i don’t know what uh colors are required in making gray

But we’ll see so one two three four five six seven nice and then what was it for red yeah one two three four nice all right so it seems like we did have more than enough at dying there it looks like you don’t really need that much dye per craft which is

Very nice indeed and it should make getting this guy quite a bit easier so a redstone torch is of course nice and easy to make as is a diamond and then one two three four five and six glass does what we need for the glass pins and at that point chet

I think we’re basically there right we are nice that is that quest complete and that was a lot easier than i thought it was gonna be so the only thing left now is to make the charging station which again really doesn’t look too difficult here we’ve still got three

Pressure tubes left so we’re more than good enough on that front our clear should have smelted up by now it has indeed and so back over here that should also be the charging station done nice so nail chair over here we’re going to move this guy

Which is going to release some uh steam there but that’s okay we can repressurize that in the future and i’m going to move away from that just have to listen to it hissing away at me um but for now all we’re gonna do is we’re gonna put down

The older air compressor we’re gonna have a pipe coming out the back of it which is this side and then we’re going to connect that up to the charging station which again i think goes down like that that should connect up and then if we put the tablet in like so

And we put some fuel in over here that should begin charging the tablet up and should allow us to actually begin using the tablet for um buying things it’s essentially a shop that works via drones it’s a little weird but we’ll let it fill up with some uh some pressure here

I don’t know if it needs to be uh how like how full it needs to be in order for it to actually work but if we for example look at this guy the pcb blueprint which is what we need next this is acquired via the template by trading eight emeralds for one pcb

Blueprint now as of right now we actually don’t have any emeralds but we can get them via the same trading mechanism for example we can trade five buckets of oil for one envelope less than ideal uh we could trade four buckets of diesel for one envelope a little bit better because we have

Diesel right now that we’re not using uh but there are also quests like paper leather and potatoes which seem a lot more appealing as well as things like coal which also seem appealing because for us uh those are basically just uh quests that take some of our mana now that we have that

Conjuring catalyst and but then again we also have stand and the fact that we can turn paper into emeralds via the use of sand seems uh very very enticing so i don’t think it has to be fully charged here to actually work if we right click here

Let’s see in here if we have call can we trade this it says vendor is selling one emerald for 18 coal i would like this trade here please that was used to order item slash fluids similar to a villager trading except in such fluid are picked and delivered via drones which is way

More awesome than villages a pickup slash drop-off location must be specified by right-clicking an inventory with a tank and or tablet i see okay so we need some inventories here i think a chest or two will work so if we put down a chest and if we right click it with this

Or shift right click it item providing location okay if i put my call in there can i then completely trade for call i can’t so now if i click this how does one interaction add one right click add one right click oh i see so we can right click to right i see

Okay so you right click to increase the number that you want so that for now let’s say one and then place order that should send a drone you can see it coming in it should collect the the call and um i assume another drone is going to come bringing in our emeralds

It is yeah look at that he’s holding a chat look at that nice all right cool cool cool so we essentially need to do that seven more times so that we can oh no we’ve overloaded the pressure here chad let me turn that off um do be careful you can over

Over pressurize things here so you want to take your fuel out when you use that when you’re not using it but um we can do this also for our presses like to get into applied energy we need presses and i believe the presses are purchasable yeah with even more

Emerald so we need to get you know 32 of them i guess if we want to get the calculation engineering silicon and logic press all of which we are going to need if we want to set up a an effective uh applied logistics 2 system for now though i’m just thinking about

What the best option for us is here i don’t see the paper trades you can go to uh custom player trades so i think what you can do is you like we are playing on a server you can trade with other players i believe if they want to sell certain things you

Can use this as a way of trading people are trading with people the eight gold is an interesting one yeah for sure like we can trade a gold to one emerald that would mean that we need what like 56 gold though to get seven more which is less than ideal i am

Kind of just thinking that we might try and get as much coal as we can using the uh the manner that we have and there we go seven mls nice so we now have the the eight required so once again we do have to uh

Go and trade here i guess we’ll put the eight emeralds in like so and then now we can go ahead and request the old uh pcb blueprint once again play solder not enough pressure okay so now we do need more pressure to uh continue to allow this to work

Oh we got it okay it did say not enough um pressure but it did work that the drones did bring us the pcb all right nice so we have the pcb blueprint now which is used to make the uv light box that being this guy right here

This requires you guessed it get more compressed steel which thankfully we have one more pressure tube and then three redstone lamps which requires 12 glowstone and 12 redstone okay that seems very doable how much glowstone do we have we’ve got 56 nice so that should be more than enough

To do something like this and then something like this and then finally something a little bit like this nice now fairly certain much like all of the other machines from numatocraft this does also require pressure however unfortunately you have to place it down this way there we go so that’s

Gonna start filling up and now we can put the pcb into the uv light box and that’s going to start uh kind of filling up this bar here once we have a full pcb we have to drop it in etching acid in order to get this um actual pcb

If we look in ji here you’ll see that we can turn the mtpcb into an empty pcb without a bar and then from there we can drop that into etching acid to create an unassembled pcb which we can then use finally chat in the making of printed

Circuit boards which we can then use in the making of actual machines so right now we’re just making the one but it’s probably going to be worth our time maybe in the next stream just making like a bunch of these see if we can seeing if we can make you know maybe

Like 10 or 20 pcbs get them all ready and that’ll allow us to hopefully just make a bunch of you know machine chassis as when we want which will allow us to make a bunch of machines going forward uh just so we don’t have to keep doing

This you know over and over and over again while we wait for that to uh do its thing let’s have a look at the etching acid so the etching acid i believe is also made in the uh pressure chamber it is indeed it requires two rotten flesh and one

Bucket of water which actually seems pretty doable rotten flesh we have a bucket we can make and water we can generate using our a lot of the seas here good stuff and so as soon as the the light box is done we’ll move the the air compressor back over to the pressure chamber

I’m hoping this doesn’t take too long i think it is going to get faster as the uh the pressure increases here you’ll see the bar there is going up and you’ll see right now the etch success chances going up so the idea here is uh that we could take

This out now and throw it into etching acid but there’s only a 20 chance that the etch would be successful there’s like a 80 chance that we just fail and don’t get anything usable out of it so the longer you leave this in here the higher the chance that it succeeds when

You drop it in the etching assets so that’s why we have to go through the uv light box but uh once that’s done check we are basically that’s basically everything pneumatic craft related that we have to do in order to progress here and we can finally start looking at

You know getting into some applied logistics getting into some better machines and of course most importantly of all i think right now getting into some better better power sources much more easily as well so this is very slow we’re currently closing in on 95 percent on the etching chance

It would also appear that it gets slower like as you get closer to 100 the the etched success chance goes up slower and slower so i’m gonna take it out of 95 i’m gonna roll the dice a little bit here chet with a 95 success chance i’m fairly confident in

Our ability to get an actual pcb here so once again back over oh we need another pressure pipe actually we don’t have any left over let me go and grab the one right here all we should have to do now is take this old pipe

And uh and throw it down over here so we’re gonna put down the pressure tube we’re gonna put down the air compressor we’re gonna once again begin uh building up on uh on the old air pressure there we go uh over here we’re gonna break in we’re gonna drop in

A bucket of water as well as two rotten flesh like so and hopefully chet once that gets up to one bar that should generate etching acid and if i’m not mistaken the etching acid is reusable you don’t have to make a new one every time unfortunately i do see having having

Read this very quickly here that it does mention the the words five minutes so it says place the etching acid in the world and throw an empty pcb that has been exposed in a uv light box after five minutes an unassembled pcb will be produced five minutes chat

Oh my goodness so we are gonna have to uh do this quite a bit going forward and i believe you can make these in bulk so we could make a bunch of empty pcbs and throw them all in um at once to really you know speed this up so that

After five minutes we get like 20 of them which i think is what we might do it in the next room i might make a bunch of these between streams the next time i’ll come back and make a bunch of them but i think definitely at some point

Going forward we are going to want to automate this so we don’t have to do this manually every time and we can just you know request them we should get our first etching bucket here very shortly any minute now there it is beautiful all right good stuff

So we do not have the etching acid and essentially all we have to do is just put that in the ground and drop in the pcb and then just wait for five minutes after five minutes that will become a um a full pcb and complete this quest

Uh for now i’m gonna pick it up um we do etching process three percent so we can pick it up part way through and keep going i for now i’m gonna pick it up though i think chad that’s probably where we’re gonna wrap things up for today

Next time i’ll come back between streams i’ll let this like do its thing i’ll put it in and i’ll take it back out at like 98 so we can finish it off uh in the next stream but next time we’ll come back we’ll look at maybe getting into apply to logistics

Too because that’s really where i want to go first um i won’t really want to get a better storage solution so we can finally uh once and for all and to get rid of all of these chests over here and we can also hook up our storage door system to our applied

Energistic system and to give us access to all of the stuff that’s already in all of these storage drawers which is going to be super nice of course as i’ve been saying for a little while now we can get better power and eventually look at getting better machines as well

But for now guys as always thank you for watching if you enjoyed the stream and you want to see more in the future you can go ahead and hit follow to get notified when i go live [Applause] [Applause] you