Hey guys i’m back with another minecraft tutorial here in this one i’m gonna be showing you how to build this mansion it has six bedrooms and four and a half bathrooms at the front side of the house there’s a very large driveway with a three-car garage and then at the back Side of the house there’s a large pool basketball court and tennis court i do want to mention i didn’t use the space in the roof at the lower sides of the house so that’s at the left side of the house above the garages and then at the Right side of the house at that lower side the opening just wasn’t really big enough to have a full-sized doorway so i just went ahead and left it as it is but if you wanted to you could just use the regular minecraft doors to have an Opening and if you were to do that you’ll be able to get a few extra bedrooms and bathrooms for those spaces but i did end up using all of the space in the roof above the main part of the house that’s above the second floor so Now let’s go ahead and get right on into building it here’s the plot size for the build if you want everything which includes the house itself as well as all the landscaping for the front and backyard then you’re going to be paying attention to the entire shape So from left to right you’re going to need 81 blocks from front to back you’re going to need 93. now if you want just the house itself and none of the landscaping is then once again from left to right you’re gonna need 81 blocks from front to back you’re going to need 63. now let’s look at that little space there down towards the bottom that is the space that’s needed for the front yard that goes out further than the edge of the house itself so you just want to make sure you can still count six spaces of grass in Between those two blue lines now at the top that’s the space needed for the backyard so in between those two blue lines you just want to make sure you still can count 22 spaces of grass here in part one i’m going to be bringing up all the exterior walls for the first Floor of the house so be sure to grab some diorite andesite pillar quartz blocks smooth quartz stairs smooth quartz blocks gray concrete white stained glass paints dark oak fences and some tripwire hooks i’m going to head on over here towards the front left side first you want to Make sure you’re within the shape for the house itself so i’m going to be over here in this corner make sure you have the dior right i’m going to start marking out the foundation so we just want to make sure we’ll look at this corner We want to skip up two spaces and then go over towards the right by one so we’re going to be right here on this grass block we’ll place a block of the dye right there so you can still see a space of grass here until you meet up With the line here at this front side so now go towards the right of that place another two go out from the corner right here right up against the concrete you could bring this over by another seven and i could go back in from the corner place another three So this is the front left side of the house so this is the front wall that’s right next to where the garages are so all right here is where the garages are going to be so you just have an idea of where exactly we are so now let’s continue on with the Diorite i’ll head on here more towards this right side where we left off i’m gonna start working my way in that direction towards the back so we’re gonna be marking out where the garage doors are so just right behind this you could place another block of diorite and we’re Gonna go ahead and skip it back by seven so you just want to make sure you are now on this eighth space so you just have a space of seven right here where the grass blocks are now you could go out from the corner of that bring this over by another two And now do the same thing just another space of seven until you’re on is the eighth block so one right there go out from the corner again place another two and now we’re gonna do it one more time so just starting right here skip over another seven So now we’re going to be on this eighth block again now right behind that block you could just skip over these two spaces here on this third space and we’re going to bring this back by another two so now where the space of two is here This is gonna be a doorway which will have access to the garages from the outside and then we have the space of seven here here and here where the garage doors are gonna be so this is what it should be looking like now let’s continue back on where we Left off where the space of two is we’re gonna go ahead and just work our way over towards the right so just start right here and place another seven And now you could just go out so pretty much work your way back towards the front you could place another two here and now start right here work your way back towards the right again and we’re going to place another 36 and now you could just go right behind here Bring this back by another two and now start right here work your way towards the right again and place another seven so now from up above looking down at it from the front side this is what we have so once again over here is where all the Space for the garages are going to be and then this right here is the front center for the main part of the house now let’s continue on here at the right side just line up here where this block of the diorite is we’ll work our way back up towards the front and we’re Going to place 12 starting right here and now work your way over towards the right place another two go out from the corner of that work your way over again and place another nine and now go back in right here place another three and this final block Should now be right up against the edge of the plot size here where this concrete is so i’ll go up above again so you can see everything we’ve done now back here all the way at the right side we’re gonna work our way towards the back we’ll start right here and just Place another 19. And now go towards the left of that we’ll place another two it could go out from the corner place another nine towards the left And now go back in right here continue on towards the left again and place another 10. So now this is what we have is this block right here should now be lined up where this little part in the corner is that juts out So now i’m flipped around facing at the back side i’m going to continue on where we left off we’ll just line up where this diorite is and we’re just going to work our way towards the back and place another 12 starting here And now you just want to work your way over towards the right and we’re just going to line up with how that front section is all the way up to that corner and just to make sure it is going to be an additional 36 blocks starting here so If you want to just double check and count it again you can but i’m just going to bring it straight across until it is lined up so just lined up here at this front side that juts out a little bit and now you can start right here work Your way back up towards the front and place another 12 So there we go so now from up above looking down at it here at the back side this is what it’s looking like so this big rectangular shape that we have here in the middle is pretty much like the main part of the house now let’s head on Back where we left off we’re gonna go to the right side of this diorite starting here and just work your way over by another eight Now go out from the corner of that bring it over by another seven and now go back in bring it over by another four and you should now still be able to see two spaces of grass right here until you meet up with the edge of the plot size Now we’re going to start working our way back up towards the front where we started in the very beginning so you could just line up right here so just starting out this space and you could just work your way up towards the front by another seven Now you can just go out from the corner of that so just more towards the edge of the plot size here and you could just place another 10. and now go out from the corner one more time you should now be right here on the edge of the plot size so starting out This space you can work your way back up towards the front you just want to make sure there’s an additional 22 spaces you should then meet up right up against that diorite And now if you did everything correctly it should meet up right here at this diorite so now i’ll flip around and look up above here at the front side again we have the entire foundation for the house itself all laid out so this is what it should be looking like So now let’s start bringing up all of the walls i’ll start here at this front left side first i’ll go here to this corner you can switch to the pillar quartz block and just bring it up by 7 in height now right here on these two spaces where The diorite is you could just switch to the endocyte and bring this all the way up to the same height as that pillar and now right here on this corner as well as for that corner we’re gonna have another pillar of seven And now we have the last three spaces right here so here in this corner we’ll have another pillar and then where these two spaces are is going to be the andesite again and now we have this section right here in the middle you can switch to the smooth quartz blocks You can place a layer right on top of the diorite and then go up along the edge of the pillars bring this all the way up to the same height and now you can switch to the white stained glass panes we’re going to fill in a 3×3 window right here like that And now above each side we’re going to go ahead and have a smooth quartz block anything an upside down smooth quartz stair down the middle anything the remaining two layers will fill in with more of the smooth quartz blocks so here is the first wall all brought up We’ll head on here towards the left side and fill in all these walls next go ahead and switch back to the pillar quartz block and we’re gonna go in each corner so where these three corners are we’re just going to bring up another pillar of seven And now on top of that diorite you could just place a layer of andesite so it’s like this and now let’s head on back up here more towards this front side we’ll go up against this pillar and we’re going to be filling in the three spaces here with some more Endocyte we’ll just bring that all the way up to the same height and then we’re going to mark out a small window so you can switch to the gray concrete we’re going to bring it up by four in height we’re gonna skip over one space so starting here on this space bring it Up by another four have an upside down smooth quartz stair at the top three white stained glass panes and then all the rest of the space above the window will be some more of the endocyte now go back here up against this pillar and we’re gonna go ahead and bring out Five like that bring it all the way up to the same height again and now right here we’ll go ahead and have another window so you can switch to the gray concrete bring this up by four skip over one have another four the stair the white stained glass panes And then all the rest of this space here will be the endocyte So we have two small windows like that for this section now let’s go to the next section right here we’ll just go up against this pillar and we’ll have three spaces bring that all the way up to the same height i’ll switch back to the gray concrete And we’re just going to have the same window design here and now the rest of the space will be the endocyte so you should still be able to just see another three spaces here and then as well as for the left side here So it’s like this and now we have the final section we’re just going to have two spaces of andesite on each side going all the way up anything you can see right here down the middle is just another three spaces so just the same window design again So we have this entire side all done now let’s just wrap around here towards the back and we’ll start focusing on this section so let’s continue on with the endocyte we have this section of three right here which will bring all the way up to the same height And now you can switch to the pillar quartz block right here on this corner and for this corner it’s just gonna be another pillar f7 so just bring it all the way up to the same height as everything else we don’t really have to count it just like that And now let’s go ahead and switch to the smooth quartz block we’ll have a layer on top of the dye right there and then we’ll go up against each pillar have another strip on each side like that and then we’re going to have the same window design that we did at the front Side so we have the 3×3 the smooth quartz block at each corner upside down smooth quartz stair and it has the smooth quartz blocks here at the top now let’s continue on we have this section switch back to the end of site and we’re just going to fill in these Three spaces here bring it all the way up to the same height And then just continue on top of the rest of the diorite have one more layer like that and then switch back to the gray concrete we’re gonna have another window here gonna be a little bit bigger than those ones you can see how those are just one Space of the glass we’re going to have two spaces here so we have this strip of four we’ll skip over these two spaces and have the other strip of four and then we have the smooth quartz stairs and the white stains glass panes is that the rest of this wall will be The endosite So it is like this now let’s continue on where this section is go ahead and continue with the end of sight we’re just going to have a layer right on top of all this diorite bring it all the way to the corner like that so right here is actually where the Pillar quartz block will be brought up instead of here in the corner like i usually would do it so it’s just like that now we’ll have a strip going up here at this very right side and then we’re going to have two windows the same exact design that we did this One pretty much right next to each other so gray concrete bring it up by four skip over two have another four upside down smooth court stairs the white stained glass panes and then at the end of sight on the top and now here at the left we’re going to Have another strip of the andesite going up like that and then another window here the same design and now the rest of this wall where these two spaces are as well as at the top will be the endocyte so it is now like this now i’m here at the very back side we’ll Continue on with the endocyte we’ll go right here on top of the diorite just work your way over towards that left and we’ll bring it over by 13. Like this now we’ll go up here bring a strip like that and then we’re going to have two windows here for this section so you can switch to the gray concrete gonna be the same design that we’ve done those ones so we have a window right here just like that We’ll go ahead and add the extra layers of the endocyte on the top and then at the left side of the window we’re gonna have three spaces of andesite here we’ll bring that all the way up as well and now we’re gonna have another window with the same design again You can now see we’re left with one space here so we’ll go ahead and bring this up with the end of sight as well as for the top so it is like this and now we’ll head on over here towards the left side we’re just going to skip Over the middle section since that’s going to be a little bit different and we’ll just pretty much do the same thing so remember we already had that corner filled in so we’re going to start right here work your way over towards the right and we’re actually going to place 14. Just like that so if we remember we placed an additional 13 here but we already had that corner filled in so that’s technically the 14th space so that’s why we have the 14 over here and now let’s go ahead and fill in these two spaces here so it’ll just be an Additional six layers on top of it like that and now you can switch to the gray concrete and we’re going to have the same two windows that we did over there on that side and then the rest of it will be filled in with the end of sight So just make sure there’s just the three spaces in between the windows over here as well So this is what the back wall is looking like so far we’re just going to continue on and we’ll do this wall next so it’s going to be the same thing that we did over there on that side so we’ll just have the layer of the endocyte on top of the diorite We’ll go ahead and have a strip of the endocyte going up here and then we’ll just have the same window design as over there you can see we just have one space down the middle so there we go just like that side so now we’ll continue on and do this entire space here So continue on with the endocyte we’ll just go here up against this wall and just bring up a strip all the way up like that and then on top of the dial right here for this section we’ll have a layer like that and now we’re gonna have another two block window here So just right up against the space of one and now the rest of this wall will be filled in with the endocyte and now we have this part here that juts out so we’re gonna switch to the pillar quartz block in each corner we’ll bring up a pillar of seven On top of the diorite we’re just going to have a layer of endocyte anything we’ll go up against each pillar and have another strip of the endocyte and now we’re gonna have a little bit of a different window here so you can switch back to the gray concrete We’ll have the four going up on each side and we’re actually just gonna have three spaces remaining here at the middle so we have the smooth court stairs upside down there at the top so this is like a three by three window here and that we have the extra layers of the endocyte We have this section here so in the corner again we’ll have another pillar of seven and that we have the two spaces here which will fill in with the endocyte so this is what it’s all looking like we’ll continue one and focus on this wall So i head on over here more towards the left side towards the front you can switch to the pillar quartz block right here on this corner we’ll just bring up another pillar of seven and then on top of that diorite will have a layer of endocyte If that will have a strip of the endocyte going up against each pillar and we’re going to have a two block window right here and right here just right up against where that indecide is so the same design window that we have right there and pretty much for most of the others And then the rest of the space down the middle will be filled in with andesite so that’s all there is to this wall now let’s wrap around we’re here more towards the front side now and i’ll just continue right along we’re going to have a similar design window That we did there at the back side so we’ll just go here towards the right we’ll fill in these two spaces with the endocyte going all the way up i’ll go here at the left i’ll have another pillar of seven here at the corner and so we have the two spaces here with The endocyte and now in each corner where this piece juts out we’ll go ahead and have another pillar of seven and then on top of that diorite we have the antecide again the strip going up against each pillar and then just the same window design we did there at the back So it’s like this and now let’s go ahead and do this little section right here so on top of all of this diorite we’ll have a layer of andesite so right along this and then for this section as well we’ll just bring it all the way to that corner for now Actually you know what let’s go ahead and just fill in these two spaces here we’ll eventually have a pillar that’ll go up right here so it’s like this and now let’s go up against this pillar we’ll bring up a layer of the endocyte to the same height And we’re going to have two two block windows on this wall and then one right here so we’ll do the two here for this wall first so you can switch to the gray concrete we’ll bring up four skip over two have another four so it’s like that And then we’re going to have one space here we’ll fill in all the space here at the top and now we’ll just have another window right here right up against the sandy site down the middle And now the rest of this wall will be the andesite again So just two windows like that and now we have this section so i have a strip of the endocyte going up here and then just the same window that we have right there they’re just gonna be lined up and now the rest of this wall as well as For this little section will be completely filled in with andesite to the same height again so is this section is all done looks good and now let’s go ahead and just do the front middle section right here so now exactly what we did there at the Back with the two windows on each side and then the space of three in the middle is what we’re also going to be doing here at the front so i’ll start over here if you remember we’re just going to place an additional 13 going it’ll be towards the left for this side You can see how it’s now lined up there at the back side and then we’ll go over here start at this corner we’ll bring it over towards the right by 14. And that is now lined up there so it’s now just going to be the same exact design that we did at the back so we’re going to have an extra strip of andesite on each side just like we did back there we’re going to have three Spaces in the middle and then the two windows on each side So it is now like this so here at the front you can see we have the two spaces here the window the three spaces the window and then the one space same thing on this side so now let’s head on over here we pretty much have this final section So we’re gonna have a window there we have that doorway and then all the garage doors so let’s go ahead and mark out where this window is it’s just gonna be the same exact way that we did that back one so we’ll fill in these two spaces here with the endocyte And then we’ll go ahead and have a layer on top of this diorite and we’ll fill in this one space here as well and then we’re going to go up against this wall and have another strip of the diorite and they will have the same window design here And now continue with the end of site we have the extra layers on top of the window and then we have the corner here Like this and now we have this doorway so you can switch to the white stained glass panes we’re going to go all the way down here at the bottom bring up three like that we’ll go ahead and curve out the top and the bottom one the empty space in the middle will fill In with a dark oak fence for the handle of the door and take a switch to the smooth court stairs and have two upside down is there at the top and now we have the single space here which we’re gonna fill in with the end of sight As well as for the rest of the space here above the door and now let’s go ahead and bring up the little parts here so i’ll just go here at this left side up against this pillar we have a strip of the end of sight like that And then we’re gonna be right here on this block right down the middle you can switch to the pillar quartz block and we’ll bring up another pillar of the seven And we’re gonna do the same thing here for this section And now on top of those spaces of diorite you can switch to the end of site and bring this up to the same height as that pillar Now let’s go ahead and mark out where the garage doors are so you can switch back to the pillar quartz block not just go here where this space is first and we’re gonna be pushed back one block further than the edge of these little walls that we have here so we’re gonna Be on this section so i’m just going to place a strip of seven pillar quartz blocks going across from one side to the other on their side you could go ahead and just fix this one Like this and now on top of that we’ll have another strip of seven go ahead and fix this one and now do it one more time And then on each side we’re just going to have one so we’ll just place a temporary one make sure that went sideways you could delete that we’ll do the same thing over here so this space down the middle we’re going to fill in with white stains glass panes Just a little window there for the door and now above that we’re going to have another strip of the pillar quartz blocks And then one more on top of that If that is the garage door you can switch to the tripwire hook we’ll place this down the middle here at the bottom so that’s like the handle for the door as i go here at the top you can switch to the end of sight and fill in the remaining two spaces here And then we’re going to have an extra block in each corner so it adds a little curve to the door so we’re going to do that again here for the space in the middle and once more here at the far right so i’m just going to pretty much fast Forward through that you can just re-watch this part if you need to know how to do it again So i now have all three garage doors marked out like this now let’s mark out the section right here down the middle for the front and the back side we’re also going to have some extra pillars on each side here at the front as well as for the back so you Can switch to the pillar quartz blocks i’ll just start here just lined up where this corner is and we’ll just bring up a pillar of seven or actually it’ll be eight because we have the additional space here where the diorite is so you could just bring It all the way up to the same height as all the other walls you really don’t have to count it but if you want to just to make sure you can and then right here down the middle in between these windows will have another pillar oh hold up there we go And then just right up against the edge of this andesite so we’re just gonna be one block further over lined up right here we’ll have another pillar like that and then we’re gonna go out from the corner and have another pillar right next to it so we’re gonna do the same thing over Here so we have this one lined up at the corner we have the one right down the middle in between the windows we have the one that’s just right up against this wall so starting right here and then another one going out from the corner of that So this is what the front side is looking like we’re then gonna head on to the back and we’re gonna do the same exact thing And now this is the back side and now here at the back let’s mark out where the doorway is here down the middle so you can switch to the smooth quartz blocks we’re going to go up against each pillar we’re just going to leave a space down here at the bottom so We’ll start on the second space and we’ll just bring it up by four on each side and then at the top in between those we’ll go ahead and have three upside down smooth quartz stairs and then switch to the white stains glass panes will have a strip of three Going up on each side and it will curve out the top and at the bottom the empty space down the middle will be a dark oak fence and now all the other space here at the top will fill in with the smooth quartz blocks just right here in between these pillars And then you could go ahead and delete the extra dial right here like that so now here at the back this is what it’s looking like let’s go up towards the front we’ll go ahead and mark out a little bit up here but i’m not going to go ahead and do Like all the different shapes and stuff that we have here in the big window we’ll just mark out a little bit of where the actual doorway is so just continue with the smooth quartz blocks and we want to make sure we’re not right next to the pillar like we did there at The back but we’re going to be right behind it and you just want to leave the one space at the bottom again so we’ll start here on the second space we’ll bring it up by four we’ll do the same on this side and then you can switch to the white Stained glass panes we’ll bring up a strip of four on each side and then we’ll add an extra layer right next to that anything will curve out the bottom skip over the second space and curve out the two at the top and then the empty space once again will be a dark oak Fence for the handle and they could delete all this extra diorite so now this is the doorway here for the entrance of the house so far and i’m actually just gonna leave it at that for now we’ll probably do the rest of it in part two but anyway This is what we’ve done so far here in part one just marked out all of the exterior walls for the first floor of the house all right guys i’m gonna leave that that here for part one for this tutorial on how to build this mansion if it helped You be sure to please leave a like subscribe for more and i’ll see you guys in part two Video Information
This video, titled ‘Minecraft: How to Build a Mansion 8 | PART 1’, was uploaded by Brandon Stilley Gaming on 2022-06-11 17:00:10. It has garnered 64426 views and 952 likes. The duration of the video is 00:37:47 or 2267 seconds.
Here in part 1 for this step by step minecraft tutorial on how to build a mansion, I will be showing you how to do the exterior walls for the first floor of the house.
➤ Please LIKE the video if you enjoyed and SUBSCRIBE for more!
➤ Social Medias: ● Instagram: https://www.instagram.com/brandonstilley_/ ● Twitter: https://twitter.com/BrandonStilley_
➤ Music Used In Video: ● All music can be found at epidemicsound.com
#minecraft #minecrafthouse #minecrafttutorial