As you can see chat i have been a little bit busy between streams uh trying to increase the size of our base again i’ve mostly just extended uh the current base that we had previously we had like this uh cube here and then this cube behind it but Essentially i’ve done a bit more base building and a bit of base reorganizing so now we still have all of our machines in here uh we’ve also moved a few of our machines over to this wall including all of our furnaces we’ve got our engineers work bench these chests are hopefully going To be gone by the end of today’s stream i do want to hopefully get a drive cage from applied energy 62 and hopefully move all of these items into that drive cage so that we can access everything from this emmy crafting terminal that we did create at the end of the last stream And that is currently a little low on the older fuel here and it’s currently not working but that is hopefully also going to be something that we solve in today’s stream i’ve then also made this kind of central area which i think is probably where i’m going to move my Crafting terminal too i kind of want the crafting terminal just like in embedded in the pillar here so we’ll probably look at getting that set up fairly soon um over on the left we have our curcumins which are still set up in the exact same way the bonsai pots Have not been moved and so they’re still pumping all their wood into the storage drawers and then all of the wood is then being pulled out of the storage drawers and over into here we then have fluid trash cans on top of both of those to delete the queer Cert eventually we could look at storing that that clears up for now i think deleting it is fine we do have uh maybe like 40 buckets worth of creator sitting in that in tanks over in our other room and then again the system is basically exactly the same we have the charcoal Pumped out under and around into this drawer here i’ve put another draw over here because uh you can pump two things of course into the blast furnace those two things being charcoal and iron so uh this door here is for you know times in the future where we maybe want to automate the Production of um of steel we can just pump iron into the spring storage drawer and it will automatically go into the blast furnace with the charcoal and then of course all that steel is then being pulled out and sent into this drawer here uh we do also have The slag on the front uh right now the slag is being exported to this chest and then there is a transfer that pumps it around to the bottom so this transfer pipe here isn’t really doing anything but i’ve put it down basically just for the sake of symmetry At the same with this pipe here there’s a pipe that kind of just goes into the floor and then goes nowhere for the iron in the future again mostly just there to add to the the symmetry and hopefully these pipes will be covered up fairly soon because i do want to get Uh some blast furnace preheaters down on either side of the blast furnace here to hopefully make getting steel much much faster i’ve also gone ahead and increased the size of our smell tree it’s now a three by three as opposed to one by one in the middle here so Hopefully we can start smelting more ingots faster and you know for especially things like getting plates which we’re going to need quite a few of today hopefully this slightly bigger small tray is going to help with that we of course have the exact same setup as before with the old Pressure chamber here and all of the accompanying items like the charging station and the uv light box as well as that brand new safety tube there that we set up in the last stream and i think finally chad all we have left really is our britannia setup which is now Out back here nothing is new this is all the same it’s just laid out differently so we’ve still got our four menopause i’ve split the end off flames now there’s like two sets of them one either side of the mana pool here and they’re still working in the exact same way with wood Coming in uh being crafted by an analog crafter and then being dropped onto the wooden pressure plates still at the portal we still have our clay conia here with the old mechanical user there for placing down sand and then we also over here have the system we worked on in the last stream With the refinery which is being heated up by netherrack and fire and the blazing pyrotheum uh currently i’ve replaced the end stone with this purple stained glass i don’t know how i feel about it it does work surprisingly in terms of keeping the heat in the refinery um i think it looks A little bit better than just having random blocks placed all around it but i’m not too sure we might change that in the future and then to keep with the symmetry i’ve moved the thermo-pneumatic processing plan all the way over to this side of the base right Here but uh other than that everything is still working in the exact same way and all of the final plastic is then pumped around we do have a drum hiding right about there which is filling up nice and quickly on plastic and then finally of course pumping that plastic around and into The plastic mixer it is of course still a work in progress you’ll notice that the little orchid up here is still kind of floating um just in the middle of this kind of courtyard area and this coil area itself is also quite flat i do kind of want to work With this stygian grass and maybe add some depth to it maybe add some like ponds or something or maybe just some flowers something like that to make it look a little bit nicer and um i think we’re probably going to want to work on a better source of mana Before we reengage the orchid here because whilst it has been working and whilst we have actually managed to get one diamond uh finally from this uh from this orchid here it is very slow with the current amount of mana that we’re generating and so i think If we’re gonna return that back on we really want to look at getting better mana generation before we do that and i think that is also probably something for future isaac to uh to worry about so i think chan the first thing that i would like to do In today’s stream is i would like to move this emmy crafting terminal because like i said i kind of want it in that center pillar there and you can do that using the facades from applied energy sticks and they’re fairly easy to make we do need these cable Anchors which are made with basically any ingot and then a quartz cutting knife now we don’t currently have a cutting knife but that is fine we should be able to make one fairly easily and then from there we should be able to go ahead and i guess nickel’s probably not the Best ingot to use given that we really don’t have that much of it i think right now we’re only really getting nickel as a byproduct from sag milling iron ore which recently we’ve not been doing ever since we put auto smelt onto our pickaxe but Essentially chad all we have to do is we have to grab at least one purple block and in fact i’ll grab a few here and i’ll of course also grab my chisel which is hanging out over here and if we grab the mosaic block which is what i’ve used for this Kind of center pillar here what we can do is we can craft the purple block with four cable anchors and you can do this with basically any block in the game that’s not like an entity block so any block that doesn’t do anything right that’s the decorative block you can that You can make into facades and i’ll make a few of these and buy a few i’ve cost me two because that’s how many uh two sets because that’s how many cable anchors we have and once you have those basically what you can do is you can then embed cabling and terminals into Walls so i would prefer to make some more glass fiber cable here because i do still want to be able to connect up the terminal to the actual storage door here so i think in an ideal world i’d want to put the storage bus on the bottom of the storage Drawer and then have a cable run under the floor all the way around and up to here to make it accessible so we’re going to put the emmy storage bus right about here we’re then going to run the cable down and then hopefully we have enough to get Around and do here we do indeed fantastic and at that point champ we’re then going to replace down our emmy terminal over here like that and thanks to the magic of these facades chat what we should be able to do is we should be able to cover up All of these cables and effectively embed the uh the crafting terminal here into the wall and thanks to the magic of modern minecraft they even continue to connect with the other textures here which looks very nice indeed and so now we should be able to access that from within here Assuming that we continue to give everything power now of course as of right now we would have to put the power box the energy acceptor like right about there and then maybe put like the culinary generator on top of it i do plan to work on bettering our power system very shortly Chat that is on the agenda for today’s stream uh so hopefully we can get rid of this i think in an ideal world obviously we want the energy acceptor just hidden under the ground receiving power from somewhere else um for now though this should work and should mean that we Can access all of our storage door stuff from in here we can nice good stuff good stuff all right let’s fill in this floor again chet there we go beautiful and then i think the first thing that we should probably work on chat today is we should probably see if we can’t Finish getting a couple of printed circuit boards because right now i believe we do have a a bunch and by a bunch i mean 33 unassembled pcbs and ideally chat we do want to turn these 33 unassembled pcbs into printed circuit boards and we do that by combining them In an assembler with three transistors and three capacitors each and once we have the printed circuit boards we can then finally use those in the pressure chamber with a simple machine chassis a stone birds and an industrial light blend to make industrial machine chassis and Once we have that we then open the doors to better machines from android all of the machines from thermal expansion and some better sources of power generation as well so definitely something we want to look into if we’re going to make these into printed circuit boards though we need a Lot of transistors and capacitors they’re fairly easy to make they both require a color of plastic dye cyan or black as well as compressed steel and redstone and i think working backwards i think the very first thing we probably want to do is upgrade our blast furnace because Whilst we do have a fair bit of steel it is very much a bottleneck how fast the blast furnace is right it’s a bottle that going forward given how slow this thing is and we can in fact make it faster using the the preheaters which are these guys here And they’re really not too difficult to make it’s seven iron sheet metal and then one external heater and the iron sheet metal is just iron plates the excel heater is iron copper redstone and then a copper coil block which is iron and copper wire the copper wire is copper wire And six so i think what we will do jet is we’ll grab some iron i think i might make like 32 iron plates because i know i’m going to need more throughout the course of today’s stream so that should begin producing iron plates nice while We wait for that let’s have a look and see if we can’t get chat the uh the other the external heaters so we need two of these i will bookmark the blast furnace pre-heater so to make two external heaters we are going to need to get quite a lot of copper wire And again unfortunately the copper wire is easiest made via the use of copper plates i’m also thinking chat it might not be a bad idea for us to look at getting a um a metal press this guy here i don’t think it’s too difficult for us to make let me check the older Manual so i asked twitch chat where if there was anything i could make that would make me move faster and they pointed me in the direction of the sojourner’s sash which i have no idea if i’m pronouncing that correctly but it doesn’t seem too difficult to make i think we do have At least one of each room left um also i did forget to mention chat the between streams i did also make the rod of the land which is why we only have one uh earth room left but i needed the rod of the land in order to Get all of the the grass out here you’ll notice now there’s a lot more grass um i basically i made the rod off the land which allows you to turn mana into dirt so much like you can use the rod of the seas to place down water We can now use the rod of the land to place down dirt and then i use that to create all of this dirt here which i then used with the opacity to get a ton of grass but nevertheless let’s see if we can’t make chats the uh the sash here so four Leather one man of steel and then a rune of air and a rune of earth so the moon over the universe we have leather i believe we can get from modern flesh right with the old mana pool we can indeed and then man of steel i think we already have so Basically that should be pretty much done let’s see so if i do one two three four and then back over here if we do something like this so let’s see if we put that into our bubble slot here we do now move faster and we also jump a Little higher as well nice okay just a little bit of efficiency now that we’ve got a slightly larger base being able to move around it a little bit quicker is uh is going to be a lot nicer i like it it is going to slowly drain through our mana tablet At a rate that you know is faster than what we’ve been using up until now but i think that’s honestly fine so metal press to make the metal press we need two steel scaffolding one redstone engineering block one piston two conveyor belts and then one heavy engineering block None of which really seems too bad chat we have already made um things like the steel scaffolding before now and we do have a fair bit of steel lying around we also have a redstone engineering block we have the steel scaffolding did it say three just two a so we need a piston A conveyor belt and a heavy machine block i believe the heavy machine blocks are made in sets of one they’re not they’re made in sets of two so do we have one left or did the pumper jack require two i’m going to assume the pump jack required too We do have a piston though and so basically all that we need to actually make this is two conveyor belts which i believe do require yet more leather but that should be very doable yeah two iron one redstone and three leather gets his eight conveyor belts and then after that it’s just another Heavy engineering block which is not super cheap but is very much so in the realm of possibility for us here more pistons more steel more components and more electrum so let’s go ahead and once again throw down our culinary generator to get our ae2 system back online Because that is also going to make crafting all of this stuff significantly easier and let’s see here so first things first let’s grab three rotten flesh and of course go throw that into the old mana pool again beautiful that should be everything we need to make the conveyor belt It is indeed perfect and then from there chad what are we missing here we’re missing one piston and two mechanical components so the components do require steel uh plates which again as of right now we do not have and i think we do need one extra piston Because we also need one for the actual multi block itself and for these guys we are definitely gonna use our workbench so we just need four plates and two copper that seems very doable chad how much steel do we have we have 51 okay let’s go and see how the Smell tree is doing all our iron it is done fantastic let’s throw you in those all ready to go which is fantastic hopefully these are possibly the last plates that we make in the smell train all right so let’s go and do something like this and like this that’s gonna get us four Or two even uh mechanical components and once we have those back over here that should be everything chat for the heavy engineering block nice so let’s go see chat if we can’t form this multi-block now i think i probably am going to set up like a basement at some point And move some of the bigger machines like maybe the blast fenders and the kokons underground because i think they kind of look a bit out of place in these rooms like this and i think the uh the metal press is also going to look a Little out of place when we put it down here but uh for now let’s have a look we need the two steel scaffolding with the redstone engineering block on the bottom level then the piston and the two conveyor belts and then the heavy engineering block okay that seems very Very doable chet we’re gonna have to rotate that but that is fine i’m also not sure if it matters if these point in the same direction but just for the uh just to be safe we will uh put them in the same direction and then i believe chad all we need to do Then is rotate that piston which we can do with the old hammer here and then right click nice and that gets us the old metal press now um if we’re going to actually make plates with this we’re going to get a plate press which is this guy um which Is made with yet more steel plates so we are going to have to make five of those and we also have to get the press mold blueprint which is made with yellow steel plate uh paper and lapis that seems doable though it doesn’t mean that we need six more uh steel plates And so let’s go ahead and do one two three four five and six throw those in so six steel plates should be everything that we need in order to craft up firstly the uh the plates blueprints and of course we’re saying just one little bit of pepper that is fine perfect I will also grab some apples whilst i’m here as well because we’re a little low on food and then at that point chad we should be able to throw all of that together with some wire cutters was it yes we do wire cutters which thankfully again are fairly easy to make Now that we have the press if we put that on like so we should then be able to just throw down ingots and have them fairly quickly turn into plates nice now we can ultimate this of course if we put down a hopper right about there And if we throw down a chest on the other side we can automate it fairly easily and someone did point out that it’s probably also worth us getting the metal press for wires so we can turn one copper ingot into two copper wire which is going to be much more efficient Than turning um one copper and get into one copper plate into one copper wire so for this it’s essentially the same recipe here we need five more steel plates which now one two three four and five should be a lot quicker while we wait for that to do its thing For now is gonna throw them off the edge there but that’s fine let’s go and grab a chest and boom nice so we have the um steel plates and there we go a metal press for uh for wires nice okay so that’s gonna make getting hopefully uh copper wire is a lot easier Going forward so now back over to the preheaters chat if we’re gonna make these we of course needed all of the iron plates that we now have and we also do need to get two copper coil blocks so we need 16 wire which means four lots of this which means 16 copper wire Which for us should now just be eight copper ingots so long as we put in the the wire press we’ll take this one out by right shift by clicking like so and then we can right click that guy on like so i will leave the plate press like in there just so it’s You know ready for when i need it next time and then if we just go quickly grab eight copper ingots and we desperately very much don’t need to get better power but one two three four five six seven eight throw them all in like so and hopefully that’s gonna nice and Quickly get us all of the uh all of the coils required and at that point i think we’re pretty much good to go in terms of getting the um the two preheaters here we should have enough copper iron and redstone left to make the actual external heater Um i believe we have more than enough iron sheet metal uh to make the uh uh mobilify in place to make the sheet metal so uh yeah at that point i think we’re basically basically good so let’s go ahead and once again steal this guy grab our copper wire Quickly hook this back up like so and then over in here let’s see so we want to make at least 14 sheet metal we’ll do 16 and then i believe we should have everything it takes to make 16 lv wire we do indeed from there we can make two copper coil blocks Beautiful and finally chat from there we can make the two external heaters which we can then of course turn into two preheaters nice and these go down either side of the blast furnace and it’s kind of why there are two holes like here and here so i think You do want to make sure they go down the right way which means you have to place them down facing this way like so and they do also require power they take power from the top and they do need redstone flux if they’re going to actually increase the speed at which You’re smelting steel just for reference this is the current speed uh the the bar in the top left is actually like a better indicator there the one that’s going 16 17 18 19 20 21 is going up but slowly now if we you guessed it quickly steal our culinary generator I’m hopeful that we can see a um a substantial speed upgrade i don’t think it uses a ton of power although i could be wrong on that i also don’t know if you actually have to have both only you can see that going up faster Already 65 67 68 70 71 72 74 75 even with just the one that is going faster it does seem to be using power quite quickly in that it’s like kind of losing power quite fast there now that we don’t have it in but you can see that that is now going Significantly faster when this has power so as soon as we get a more reliable source of power than the call here generator these are going to help us tremendously and so that does kind of lead us chat into uh into power right where are we going to go next and That’s a good question there were a lot of options for power um but people have recommended a few things people recommended the the call generators like this guy here these are very cheap and uh probably is something i should have made earlier and honestly it might not be a bad idea To get them going down now as kind of a backup source of power because you make these batteries four at a time and then it’s just a battery and a furnace makes a cold generator and we can just pump some of our planks directly into that or some of our sticks even Directly into that in terms of bigger power because of course we do still have our pump jack hanging out back here oh which i have moved by the way i’d like to do another scan uh to make sure there is oil here and there thankfully is but um If we’re gonna make this work we do need like a thousand redstone flux per tick and so i was kind of chat thinking about using the diesel generator for immersive engineering sticking with this theme of building these big old machines um there is a machine which i think is under power wires and Generators called the diesel generator and this guy is pretty big and pretty expensive um but it does produce 4096 redstone flux per tick and the way that we can fuel it is using biofuel or bio diesel yeah we can make biodiesel for immersive engineering which is made in the refinery which is Another multi-block from immersive engineering so you can make the biodiesel by combining ethanol and plant oil ethanol is made from sugarcane which we can ultimate all apples both of which we can alternate with bonsai pots and plant oil which we can get from seeds seeds seed seeds or seeds and Any of those we could probably grow fairly easily in a garden cloche which isn’t really too difficult to make so if we could get enough resources to build this again it’s mostly just a lot of steel you’ll see quite a few heavy engineering blocks there some radiator blocks generator blocks Redstone engineering blocks and fluid pipes it’s not too bad we do of course also have to get the refinery which is again get more steel yet more engineering blocks of the redstone light and heavy variety and then we have the fermenter which you guessed it is more steel more engineering blocks Some cauldrons and some sheet metal it looks doable but it also looks like we probably need more steel than we have right now so i think i do want to do that but i think we have to hold off until we have better resource generation because right Now i don’t think that we have enough iron to make enough steel to make that machine or make that setup just yet and so what i’m thinking of doing right now chad is i think just to get our power just to stop us from having to move the culinary generator again and again And again and again what i think i’ll do is i’ll make four i guess of these call generators which i believe each produce 40 redstone books per tick so that will give us kind of a passive 160 on top of the 160 that we’re already getting from our culinary generator which we can Now ultimate because we are about to upgrade our sag mill and alloy smelter so they stop leaking power and at that point we can start running conduits around the base to give everything power from one centralized power source i’m hoping we do have enough power here we did have 14 000 rf kind of backed up in there it looks like we should have enough to get us through here which is fantastic there we go and if we go ahead and combine that up that gets us four small batteries which we can then craft up with four Furnaces right now we seem to be completely out of furnaces but that’s fine they are very easy for us to make one two three four and i guess we could even just do like that one two three four and then at that point chad all we really need to Do is connect those up to our fuel now the twitch chat has reminded me that we do have the ability to transfer power wirelessly using extra utilities too it’s not crazy good but it should be okay for the time being because a lot of our systems don’t really require That much power so you can use the wireless rf battery and the wireless rf transmitter the wireless ro transmitter will transfer energy from batteries to nearby blocks up to 80 watt storm flux per tick and then the wireless rf battery stores rf energy for wireless transmitters requires rf transmitters to send energy So it does require good power as well but i think this might not be a terrible idea um it does mean that we’re going to need another resonating crystal and i think we’re probably getting to the point where we need to get another one of those anywhere because i’m fairly certain that We are running low we might have maybe one left yeah we got one shard left here but i think we’re definitely going to want to make more than one charge do i still have the um the glass cutter the answer would appear to be no is it in my uh shocker box It is so boom and boom i’ll make a few of these chat i think just to have them and then we can grab some some redstone here and of course get you know maybe like eight of those you know i’ll get nine just so we can uh get rid of that last little Like shot there that we had so let’s see wireless let’s start with the battery the battery looks very durable we do need to get say a block of redstone but that’s fine all these two blocks of redstone i should say that’s very doable and then we could also then we need Basically just wireless rf transmissions for all of the machines yeah it does say range four but the range there is not how far it has to be away from the battery the range is how far it can power nearby machines it’s pretty nifty actually because for example over here We have a few machines i believe that we could put this down like this and it will power a few of these machines here if i uh quickly get rid of like this end stone i believe that we can right click that and you can see the machines that it’s powering It will power those wirelessly it does however need power in the battery so what i’m thinking chad is i’m thinking of putting these call generators down out here it’s a little janky but we do already have this uh you know set up here that’s turning our planks into uh Our logs into planks and so honestly if we can just put down these four and have them begin you know taking some of the planks here and producing power we can then pump all that power hopefully fairly easily into a wireless battery which then potentially we can use to uh To send power to those wireless nodes and power our machines so that does seem to be working for whatever reason the uh the pipes don’t seem to want to insert into the generator directly and so we’re having to go through these uh through these hoppers it’s kind of The middle men here but it seems to be uh to be working power is being made and uh hopefully chad what we can do is we can then begin sending that power wirelessly to other machines so for example let’s see if we can’t do something over here so if i put a Thing down there is that close enough no tiles nearby i don’t know if it can give power to these preheaters it doesn’t look like it can which is unfortunate what we might have to do is we might have to um get some kind of energy storage to go on Top of those preheaters to then send power into it it’s awkward though right because if it doesn’t work with the endo machines i’m assuming it doesn’t work with the nyo capacitor banks and so that only really leaves the the energy cell from thermal expansion as the option then again that doesn’t look too Difficult to make actually i thought i thought this was going to require a uh a chassis but it doesn’t look like it’s going to yeah okay so it looks like if we’re going to send the power wirelessly to some of our machines but we are going to have to A few of these energy cells here which shouldn’t really be too difficult none of this stuff is super difficult to make um again unfortunately we can’t craft gears the old-fashioned way usually you can just craft gears with like four ingots in a crafting table um unless it would seem that once again We are going to have to get another out of the plates but again that’s fine they’re not too difficult to make so let’s go get uh five more steel plates and see if we can’t make a um a gear press and at that point um we’ll look at getting a few energy Cells the idea being that the energy cells can receive the power from the wireless transmitter here and then send that power into things like the preheaters and i’m being told by the chat that the ndio machines also don’t accept power wirelessly from these little uh wireless transmitters You’ll see if we right click here none of the android machines are getting power so instead what we’re gonna have to do is we’re gonna have to use the wireless transmitter to send power to the energy cell which will then power the alloy smelter in the sag mill which should be fine Nice all right so now we have the lead gears chat i think that the rest of the setup here shouldn’t really be too difficult we do of course have to move back our culinary generator hopefully for maybe the final time although that’s probably wishful thinking time for x-net we don’t have x-net right We do have hexnet oh now the turntables all right so one two three four we then are going to need some redstone blocks here thankfully i do believe we have maybe just enough redstone to make that work one two three four perfect and then from there we do need More lead chat which i think is going to be the downfall of us and we also need more electrum as well which uh it does require a little bit more gold and silver that isn’t gonna be too bad we are gonna have to get some more silver from the nether Because we’re currently out however like i said i think the downfall obviously was going to be led unless i have some lead all hanging around in here that i have uh not processed we do nice okay cool cool cool and as always it’s definitely probably quicker if we just do this these days Given that we have fortune 3 we pretty much always get uh two ingots back and we can double those nice and quickly good stuff good stuff i am going to have to move the culinary generator again chat despite not wanting to move it and we are also going to have to go and Find at least one more silver if we’re going to make the the electrum here so champ a couple of redstone alloy ingots laser we should now be able to turn them with the electrum into conductance coils we’ll make four from there we should be able to hopefully produce four energy cells Two three and four each one of these can hold two million redstone flux and can transfer up to a thousand redstone flux per tick not that really matters too much because the wireless transfer items these guys down here the wireless transmitters can only transfer 80 redstone flicks per Tick which again should be fine i think things like the uh preheaters here each use about 32 ish rfp but essentially we want to make sure that uh this is already set up correctly but the orange is output and blue is input so if we were to put down I guess another one of these like right here i think we can if we want just put the transmitter like there that should then send power to both of these guys and thus look at that it’s sending power to the preheaters so just to recap because it’s been A little all over the place over here we have wood being generated by our bonsai pots that is being sent through to the analog crafter which is turning the logs into planks those planks and then some of them are going to make mana but some of them are now also going over To produce power in the the call generators here that power currently is not being transferred out of these three uh call generators we do to grab some conduits to actually pipe it around right now it’s only this one and it’s actually doing any uh any power generation but this wireless Battery here is storing the power or will be eventually storing the power from here and then that’s sending it wirelessly to these little wireless rf transmitters that are then sending power to the energy cells and then the energy cells are putting that power into the preheater The only reason we need the energy cells is because certain machines like the pre-heater like the metal press and like the machines from android o don’t accept the energy from the wireless transmitters natively hopefully most of the machines that we use going forward will have native support for the wireless transmitters And we won’t have to have you know just a ton of energy cells around the base but if we do something like that and again for ease of use chat i think i’m just gonna put this down like right at the top like that it doesn’t need to Be on there it could be anywhere uh within a full block radius but i think for now that is perfectly fine and i think chad it probably makes sense for our last one to go over here to keep our ae2 system online now i’m going to Hazard a guess here that a2 also doesn’t work with this yeah it doesn’t but again that’s totally fine and we can also move the energy acceptor now it doesn’t need to be over here so i think what we will probably do is real quick chisel i guess like one of These pieces of endstone are just kind of on their own into the old dent block here so i can put it in the floor again like that and then i think for now we’ll just move the energy acceptor like over here we’ll put that down there and then you Know we’ll down an energy cell like that and we’ll put the little wireless rf transmitter on top that should put power into here and then if we set the back there to output that should hopefully provide power to the system nice so hopefully going forward chat finally we will now have permanent power Uh to our applied energistic system allowing us to always access all of the stuff here without having to constantly move the culinary generator again and again and again and again um we do of course if we want to actually use the end i o machines need another we would need another Energy cell if we want to do that although i’m kind of thinking chat what i might do is i might just move some of these machines over into this kind of like new main central area and then we run like maybe put the market over here like we’ve done with our Tinker’s construct parts and then just run energy conduits from the energy cell down there up and around and into the machine yeah before we do that though chad i think that it’s finally time to pivot back to what i think we started doing at the start of the stream And that is making of course the printed circuit boards so printed circuit boards if we’re going to make these we need transistors and capacitors which is why we made the uh preheaters so we can make steel faster let’s go see how much steel we currently Have we are very low on iron which is a little uh disheartening but we do have 125 steel so i don’t think that’s quite gonna be enough to make 32 printed circuit boards but we can make some right each printed circuit board requires an unassembled pcb some solder which is just tin And lead as well as a transistor or three transistors and three capacitors three transistors is three black plastic three compressed steel and three redstone so that means that uh to turn an unassembled pcb into a printed circuit board we need six plastic six steel and six redstone per pcb Which means we can probably do like 20 let’s try and do 10 i guess so let’s try and make 30 transistors and 30 capacitors to do that we need 30 black dye which i think we should have the plastic to do we might have to wait a second for the plastic to uh Move in like i’m fairly certain that we do have and what we could do actually i guess now chet is that we could put some speed upgrades or some of the speed upgrades that we’re holding into this transfer node here to pump the plastic in faster there we go So 20 black plastic we also need 20 was it green plastic blue plastic 20 cyan plastic and then at that point all we have to do is combine that up with um redstone and compressed steel so we are going to need 40 compressed steel which again should not be an issue now People did ask me in the youtube comments i did point out i should say in the youtube comments and also are we light on grid power we’re not i can’t help but notice my ring’s not working maybe i have to do one of these there we go people did ask me isaac why Are you not using the input port for the uh for the pressure chamber and let me go and grab it real quick and i’ll show you why i’m not using it the short answer is i don’t think it’s very good especially for non-automatic tasks such as the one that we’re currently doing This guy right here the pressure chamber interface it does work and um for more automated crafts i think it’s gonna be you know very useful but um for manual for little crafts like this i think it’s just quicker and easier to do it manually so the first downside to the pressure chamber Interface is that you can’t put things in manually like you can put in an item filter but i can’t actually put items in here you have to use some kind of hopper or other device to put things in there and on top of that the main benefit of using the pressure Chamber interface is to not lose pressure but it still loses pressure like if i go ahead and i put some uh some fuel in here which we’re gonna have to grab real quick but if i go and grab some uh some wood to put some fuel in there the whole Point of using how much wormwood locks we have got a stack the whole point of using the interface is to not lose pressure but after some testing it does still lose pressure so we’ll do this and we’ll get the pressure up produce this image like so and then let’s say that we Wanted to uh we’ll steal this hopper real quick because again we need a hopper to actually use it so we’ll put in let’s say 40 steel you can see the pressure’s at 1.77 right now And like not enough pressure in the chamber to move the items apply more pressure to the pressure chamber like it did work but you saw it lost pressure there and it just doesn’t seem worth it like it’s so like again i get the idea i get why it Exists and i feel like it does have the potential to be good maybe with speed upgrades maybe with you know automation but for now given how fast we can get pressure using uh just wood and the speed upgrades we have i feel like just doing it manually makes things Like it’s very doable right i feel like the the interface is going to come in a lot more useful when we actually get to automation of the the pressure chamber for now though i think it’s very much so fine if we just do something like this and then pull them out manually right Like that it takes two seconds you lose less pressure through the interface you do the multi block yeah but that the the pressure loss of the multi block is not worth the effort and time it takes the more the interface is slower right and i can’t manually place items In i have to wait for the hopper to do it and the hopper itself is slow right like the hopper puts items in very slowly initially and like the fact that we can make pressure so easily pressure is just wood for us and the fact that we can make Pressure so quickly the speed loss of using the interface in my opinion is not worth the wood gain when it would for us is free and infinite right that’s my that’s my argument right now that’s why i’m not using it but there we go so we now have faulty compressed steel That should allow us to make 20 transistors and 20 capacitors i don’t know why i picked 20 because that’s not a multiple of three i feel like i really should have picked either 20 i should pick 21 or 18. so yeah we’ll do um let’s make two more i guess Compressed steel then we’ll do 20 uh 21 of each so we’ll start with the transistor so we’re going to do 21 black plastic 21 compressed steel and 21 redstone so 21 redstone should be very doable and i’ll go ahead and just grab a stack here So let’s do 21 of you 21 of you and then i guess just 32 of those for now should be enough and again that’s pretty much instantaneous perfect and then once again we’ll do 21 of you 21 of you and again i’ll just throw all of the redstone in For now it doesn’t really make too much of a difference and there we go there’s all of the uh transistors and all of the capacitors nice so nail chat comes the potentially rather slow parts um i think i probably do want to grab my speed upgrade over here again Because i’m fairly certain that the assembler is from extra utilities to the guy that’s all the way back over here it is i mean i’m gonna have to move this but now we need to combine the pcbs the assemblers uh the pcbs the transistors and the capacitors with some solder so i Think what we’re gonna do is we’re gonna steal these energy conduits and i think we should have maybe a few more lying around somewhere because i think you make them in sets of eight so we should have two left somewhere else but then i’m probably going to hook that up although I don’t know how much power this uses says ten thousand redstone flux and ten seconds so a thousand redstone flux per second which is 50 rf for tick if that’s the case then i guess we can probably just use one of our rf transmitters let me give that a go If we put this guy down like here and we put down the old transmitter next to him that does indeed connect it’s from the same mod so you would hope it would and then ideally chat we can put in both of those this guy and then uh the buckets of Solder that we’ve been making up until now have been made like this we use four solder powder which is a pestle and mortar with lead dust and tin powder and then we combine that with a bucket lighter on fire and that gets us an actual bucket of solder It does appear that we are like completely out of lead dust and tin dust i think we probably do have tinders lying around potentially in one of these chests yeah we also have lead dust as well like a rather large amount of it more than i was uh expecting honestly that is Why we actually also have tenders nice okay so we should be able to make that fairly easy it’s a lot easier in the smell tray really oh yes you can combine the lead and the tin in the smell tree to make the solder interesting in that case chat then yeah it probably Does make a lot of sense to first of all put a few of these items back but then probably just move this guy right like if we pick this up and move it over here what we can probably do fairly easily is for now at least just put the assembler down like Right here it looks a little awkward and it’s definitely not permanent but that should maybe connect that is connected it’s also connected over there but that’s that’s fine and then yeah if we once again put in u u and u we can then drop our Tin and our lead directly into here so i assume it’s one to one oh 36 36 and 125 okay so we need let’s just do like four and four one slight downside there is that we do want to we want to make sure that we wait until It has been turned into the right alloy before we pull out but once it has been turned into the right alloy we can then extract that directly down into here i would hope we can nice and that’s going to slowly but surely clearly with not enough power I do wonder if moving this further away might help us here like if we put it there so that it only connects to this guy as opposed to connecting up here as well then it might work faster it’s not ah we saw it making enough power there which is unfortunate But it is working and it will get us the uh the resource that we’re after so i guess chad really we can disconnect this and we can put basically all of our let’s do like 16. 10 and 16 lead nice and yeah i guess we can move the corner Generator over as well as chat as handily pointed out to give it like an extra extra boost of power we do have the speed generators at the speed upgrades as well of course for the culinary generator yeah there we go so now we are making more power than is required And also now that we’ve got eight buckets worth of solder there we should be able to pull that out nice and easily into the old assembly there and yeah hopefully chad that’s basically just printed circuit boards they are going to be pulled out into the hopper and down To that chest there which i’ve just covered up with the culinary generator let me move that i guess over to the other side for now but there we go it is working finally finally finally finally it is working and so we’re now we’re one step closer to the industrial machine chassis now i Don’t think getting from where we are to our first industrial machine chassis is really going to be too difficult the printed circuit boards we now have the simple machine chasse is just iron and grains of infinity and we did get more grains of infinity at the start of The stream so we’ve got what it takes to make those the stone burnt is also very doable i did in fact before the stream began i put in i think like 60 polished stone into our resonator and so we should have 60 stone boat over here we do indeed fantastic And then the only other thing we need then chat is industrial dye blend which i don’t think again is going to be too difficult it needs lapis powder which is lapis through a sag mill it needs another quartz dust which again is easily enough easy to do because we can Duplicate under the quartz using the conscious catalyst it needs organic black dye which you get from pulverized coal or pulverized charcoal with slime which we can of course get from cactus so again fairly easy to do and we could duplicate our call um using the conscious catalyst or we Could just use some of the 2048 charcoal that we have sitting above our blast furnace so getting that shouldn’t be a problem and then the organic green dye is get more slime balls which for ozzy get more cactus with clippings and trimmings which you can make from dandelions roses all the flowers basically Including grass and leaves so as long as we have bone meal and shears as well as cactus as well so yeah that shouldn’t be difficult at all chet the hard part bizarrely for us now is iron because we have six we have six iron ingots and so i think chet What we’re going to have to work on in the next stream is a better source of of resource generation this is now done which is fine and we do have more solder there ready for the next uh like batch that we make but i think we’re gonna have to make a Better resource generating setup and i think for now that involves us basically um producing more mana there are a couple of options people have recommended the there we go the gorillas which is a flower that consumes food and produces mana uh somebody just now reminded me of the Munch do which is a flower that consumes leaves and produces mana and we do of course have leaves coming in as a byproduct from our bonsai pots here and we do have you know 2 500 leaves sitting in this chest here so we could use those You know place them down and have the munchies eat those and produce mana and there were quite a few ways that we could produce mana going forward and if we can really up our amount of generation we could then start to uh very quickly uh produce Uh ores using the orchid ndm and and hopefully start to process those in a new sag mill a new alloy smelter smelt them up nice and fast um it would mean that we’d have to get a infinite supply of endstone which again i think is doable using this method here You know we can get ender pearls using the loot fabricator using our uh super high tier enderman data model that we made previously extra dress your master we can get as a byproduct of that as well and then sandstone we can make from sandwich you can make from mana and so It can all loop back in that way so i think that’s probably check what we’re gonna work on in the next stream we don’t have a ton of power for now but i think we are at a point now where we don’t really have to worry About power too much we’ve got you know the generators making power over here and that does remind me that i should go ahead and do something like this because that might have actually been why we weren’t producing enough power because we were only doing 40 hours per tick not uh 116. of course each transfer node can only do uh atr of protect but the fact that we have multiple of them uh having more than that is gonna be very useful for us um but yeah chad i think that is where i’m gonna go ahead and wrap up today’s stream For now i’ll be back tomorrow at 4 pm at bst we’ll look at getting some better mana up and running we’ll look at getting uh some better resource generation up and running well maybe look at getting uh you know even more better machines have been running you know we still want to get The better alex smile to be strong and get a better segment all that kind of stuff going forward uh i do want to get some garland clusters i do want to look at getting a diesel power and of course i do want to look at completing this questline and getting to The overworld but for now guys as always thank you for watching [Applause] [Applause] you Video Information
This video, titled ‘Minecraft Levitated | WIRELESS POWER, METAL PRESS & BASE UPGRADE! #13 [Modded Questing Exploration]’, was uploaded by Gaming On Caffeine on 2020-09-19 23:00:03. It has garnered views and [vid_likes] likes. The duration of the video is or seconds.
Minecraft Levitated | WIRELESS POWER, METAL PRESS & BASE UPGRADE! #13 [Modded Questing Exploration] with …