To Asgaard – Create Engine and Stone Generator: ATM Spellbound Minecraft 1.16.5 LP EP #12

Hello again welcome back to asgard and welcome back to atm spellbound uh so since the last episode i have been just doing some work around the base uh this little area i turn this into kind of like a little a little potion making area will have a

Bigger potion room i’m sure but uh i just i needed something to go in here so i was like well this could be a little potion nook uh that then leads on into our mallam area uh so i went ahead and set up that i’m trying to work on

Room by room and try to get things decorated uh and then back in here i have turned this into a library now this is actually an arcane edelwood we haven’t gotten into that but i can use the alchemy table to make that so not really bypassing progression but i

Wanted the block uh for that so but anyways we have the first floor of the library which is just kind of going to be general enchanted books as well as some of this stuff and then just kind of decorated this out and tried to bring this all together

I also started plotting out kind of where steps are going to go which this is really in the way right now all this create stuff needs to go but we’re going to be working on that of course starting today uh also started bringing out some windows and things and uh

But started bringing out some windows and things and uh if we head upstairs where these steps are gonna come up uh you can also see that this staircase leads up to the library at this point um to the second floor of the library i think it’s gonna be like three floors maybe

Uh with the third floor being a bit bigger these are kind of all the same size uh deal with him just in case uh but you can see i’ve started plotting out some rooms here and things where these kind of come up and then over here i don’t think i’m

Actually going to keep this design i’ve been i’ve been back and forth with how i’m going to lay out create in our first power system you can see there’s something there i scrapped that and i was like well i’ll move it over here and then i scrub that

And i think we’re gonna we’re gonna switch things up because i wasn’t happy with either of these layouts because they felt kind of forced uh because we were gonna do these big like windmill kind of turbine type things try to make them look a little bit magicky

They’ll be fine for a different area but i feel like they’re really short and fat in these areas and i want something more tall and cylindrical and it doesn’t really work out in either of these rooms so we’re actually going to scrap this and all this so

This floor this room is just going to be this floor is just going to be or this room is just going to be for our create stuff uh is all kind of the create process stuff so but anyways we are going to delve right in we’re going to start integrate today

I imagine it’s probably going to span two episodes getting our create stuff moved over realistically because we’ve got a lot of setup stuff but we also have a bit of progression related stuff with create to go ahead and push through uh so anyways what we are going to do first and foremost

There’s two things that we’re going to want for our create system first up we’re going to want an empty blaze burner and on that same note we’re also going to need to get uh oh i didn’t need that but we’re also going to need to get a mixer as well so there’s that

Um and that way we can start making brows of course we do have to get a blaze in there that’s not going to take but a second and then we are also going to have to get kelp you know that’s a lot of what limited us before is because we did not have

The kelp to make the dried kelp so we are going to set out for both of those things it shouldn’t take long because we have the broom and we do have another fortress uh so i’m gonna pop into the overworld first we’ll go out for the

Kelp you know we found an ocean that shouldn’t take long and we’re just gonna pop over to the distant north village because that’s pretty close to the ocean actually and then we’ll head down towards the ocean because i think it’s just uh yeah it’s a little wise but

And then we can set this white stone up in the nether that way we can quickly teleport to the nether fortress grab our blaze and then we’ll be all set as far as what we need to go out and find i’m going to gather up a bit of kelp though because

I don’t have a place set up just yet for us to farm it no big deal but we’ll just grab a few stacks of it okay so right here we’ll just start vein mining this up now we can make sure we’ve got plenty of kelp for what we’re going to be doing

We’re also going to be setting up uh or smelting you know uh since we can’t do the or uh processing times 12 that we were originally planning on doing uh we are going to set up some more smelting we’re just going to be doing that with create

Basically the same way that we’ve been doing it except involving some occultism demons and then some conveyor belts and things so that’s a bunch of kelp that should be good honestly and let’s see the kelp i can smelt that with the well bulk smoking not bulk blasting okay

That’s fine i might make a small adjustment because i’m not gonna need any limestone right the second all right we’ll just do another entrance and we’re gonna pop over to the we’re gonna pop over to the nether fort all right so all we have to do is just find ourselves a blaze

Right click it there we go quest complete and advancement made so then let’s pop back home do any of these quests give rewards by chance i’m gonna wait to turn these in of course i’ve been building up a lot of xp having that spawner down there been

Building up a lot of xp uh we got 113 levels at the moment which i did just a little bit of enchanting so that’s pretty good that’s pretty good for sure so initially of course we’re going to have to set up our mixer over here i suppose

And we’re going to get ourselves a basin and the basin is going to set right in here and right underneath it we’re going to have our blaze burner which is going to power that now we are going to have to heat it up and that’s fine but

Let’s go ahead if we take a look at brass it is a combination of well yeah mixer there we go uh zinc and copper okay now zinc is actually something that we never added to our area so we’re going to add that to our transporter and that way he can start running this

Over so we’re processing the zinc now and we’ll just get all this melted up and then we should be good i’m doing uh two stacks of the dust for now it’s gonna be overkill at the moment but uh you know down the road maybe it’ll be useful to have it so also while

I’m over here let me go ahead let me just pull up this water for right now and let me switch this out for netherrack and that way we can do some smoking and then we can just toss our kelp in right there and get that smoking

And that way we can get dried kelp and that should be good for right now we’re gonna have uh two stacks of kelp also we’ll probably end up uh or do we know we have two stacks in sixteen in the world how do you see me from way over there

It must be because i’ve noticed the uh i noticed the boats need like a reset in order to work so if i go like across the dimension or something all right so we’re going to start off with some zinc and some copper so there we go and then what we can do is

Uh well this actually isn’t gonna work i actually need a cog for this um let’s see probably leave it here though and we’ll just go ahead and get a couple gear boxes and we’ll just run this back and there we go that way the mixer can activate up now

We’re gonna have to heat our blaze burner let’s just grab ourselves some coal we’re going to right click that and that’s going to okay it’s not rotating with enough speed that’s the problem we’re going to have to boost up the speed um so what we’re going to do for thoughts

Let’s get ourselves these large cog wheels some small wheels Um because right now we’re not doing enough speed for this to actually work and that’s fine i might be able to put it in here so let’s clip off this and let’s put that right there and you can see now we’ve got enough speed because we’ve oh my gosh because we have

Sped this up um you know we’ve talked about this in previous series but a large cog wheel spinning on a cog on a small cog wheel same speed um or you know this specific speed the the large one is going to turn at you know however many rotations per minute

But the smaller one due to less surface area of course is going to spin faster it’s going to make a rotation faster and that’s going to increase our overall rotations per minute through that given line after this point if that makes sense so basically just going from a larger

Surface area moving an x-speed to a smaller surface area which is receiving that speed but basically causing it to spin faster so so this is going to be working it’s going to be crafting up our brass at this point and i put in a half stack of each

So we’ll just give this a little bit it’s going to take a little while for our brass to craft up and we want to make sure that our blaze burner keeps burning so we’ll throw in just a little bit more coal into that all right so now that that’s crafting

Out now that we’ve got brass coming in um at this point what we can do we can turn our attention over to this area of course it’s raining um let’s go ahead and get ourselves for starters let’s get more shelves because i know we’re gonna end up needing those

And then let’s go ahead and get ourselves some mechanical belts because i know we’re going to need those um and then let’s also get let’s see i can’t remember our brass funnels upgraded or no they take the electron tubes okay so let’s go ahead and get ourselves some of these

And i know we’re going to be using these a little bit today so we’ll get a few of them and then let’s see it’s going to be the brass and that’s let me go ahead and get some redstone torches also and then let’s go ahead and get some sandpaper

And the way this works of course you can do this a couple different ways you can drop it on the ground and right click it and you can see that we got polish rose quartz you can also do one in your offhand one in your main hand and just run those together

Let me go ahead and get more sandpaper and we got ourselves ten polished rose quartz okay now how’s this brass doing it is done if we take a look here we got ourselves a stack of brass and that should be sufficient for a while so we’ll just leave this be we’re not going

To need to set up i don’t think uh for beyonce and now that we’ve got our brows if we take a look at the mechanical crafter because i know at least a few things that we’re going to have to craft with this and the crushing wheel

We’re going to need a total of 21 of these so let’s go ahead and get ourselves some mechanical crafters looks like i’m going to be missing most everything oh yeah we’re getting some brass sheets all right we’re going to go ahead and turn 16 of our brass into

Brass sheets and we’ll give that a minute to craft up uh and then i think beyond that well i probably will need to make some more small cog wheels okay so there is our brass sheets okay then we can get our brass casings there’s that and we can get our first mechanical

Crafters this will be enough for a minute we’re going to make a few more for our grindstones but this will be good for a moment and then what we’re going to do of course is just run these out we’re actually going to be setting one out

Up right here and we will get all this moved i promise but i don’t have power up there and i don’t want to go with water wheels up there so this is how we’re going to do it for just a moment now if we wanted to make flywheels for example uh we need

Oh actually we need one more of these don’t we put one right here uh but if we want to make flywheels for example we need a layout like this uh with the brass casing and then the brass that runs around right there and let me go ahead and get another

Craft of brass casings and the very first thing that we are going to be making is going to be the flywheel um so you’re going to notice these little arrows of course i think all of this is probably pretty straightforward at this point but we’re going to just let’s say lay this out

Here here here and then the the finished item will pop out that side but if we put our brass casing there and put our brass around like this it’s going to start crafting all that stuff’s going to start coming together and once everything reaches this spot then it’s going to pop off

And we’re going to get our very first flywheel so there we go and then we’re going to go ahead for right now we’re going to make one more of these flywheels are one of my favorites i like flywheels and windmills a lot the water wheels are kind of meh

You know that’s what we started with uh we probably won’t be using them much uh you know i mentioned back then they’re not my favorite thing in the world but they’ll do the trick temporarily and it would be something that we could set up and then we never have to touch

Again at least that way we’ve done one uh but there we go we got a couple flywheels and of course flywheels the way they work is they attach to a furnace and these can attach to a furnace and when that furnace runs it generates power now it’s important with flywheel

To make sure that of course you have some method for constantly generating power but some of the stuff that we did last episode is perfect for that so we are going to be going with that method i do believe now another thing that we’re going to definitely be needing is brass funnels

So let’s go ahead and at least get a couple crafts of these like i’m thinking uh eight to start with would be good that’s gonna put us in a pretty good spot and then we’re gonna go ahead and do two rituals first up we’re going to do the

One for the foliage transporter and then we’re going to do one for the wormhole frame so go ahead and get these running and that way because we’re going to be using a folio and we’re also going to be using a wormhole today probably well in part two we’ll

Definitely use some more foliates but i think today just one foliate and then we’re going to go ahead and get ourselves a blood infusion core and we’re going to get ourselves another blood infuser and then let’s go ahead and get ourselves a block of diamonds and let’s get a full of promises

What i do with my other one actually i think it’s in there at the moment but that’s fine i’ll just get another one that’s fine uh okay we did get our fully out so we’re gonna go ahead and grab him i’m about to put a sound filter on that i think

Because i can hear those skeletons all over the place and there we go there is our stable wormhole now in addition we are going to want to get uh some furnace engines which is a 3×3 craft with the mechanical crafters so let’s just put one in right there that’s fine honestly

Uh we’re going to put on a lever right there just so that we can activate this with some redstone and this is going to be piston here and brass casing in the center and then we’re going to have our brows around we’re gonna be making two of these one

For each flywheel of course we’re gonna hit that with some redstone that way this goes ahead and starts crafting but if we decide to make more flywheels we don’t have to rebuild it because we’ve got that right there oh is that not uh it’s bryce ingots there oops

I was like wait a second why isn’t this right all right so that’s running now we should end up with our furnace this time there we go and we’ll get one more of these crafted up a little bit of setup today but we’re almost we’re almost there okay so now

I think we’re gonna need a couple more things but we can go ahead and get started with our setup and then just make a few things that’s pretty much all of the create progression that we’re going to be doing today we’ll be making a grindstone most of the crate progressions done once you

Have the mixer the metal press and um the blaze burner and stuff you pretty much done with progression another thing we’re actually going to be needing is a deployer uh so let’s get that and we’re also going to want in addition one other thing a mechanical

Drill i know i will need these things so there we go we’re completing a bunch of quests oh it looks like uh this one we get sandpaper from this right here would be the center of the room uh so what we’re going to do right here

Is we’re going to put in our stable wormhole right there and then we’re going to come out uh just a couple blocks we’re going to say right here honestly is fine and we’ll make a little like pedestal for this but we’re going to put in our blood infuser right there

And then we’re going to put in our promise of tenacity and what we’re going to be doing let’s set up our foliage real quick he’s going to set right in here we are going to we’re going to say set deposit and then he’s going to be depositing

Things into there and we’re going to say set extract and before we do that let’s oh wait i never link this us this is set extract we’re gonna click right there so he’s gonna be extracting from there and then we’ll go ahead and just open him up

And we’re gonna be setting a white list for bones so he’s gonna be moving bones over oh yeah and this is going to be side specific right so oops he’s extracting from there set deposit and he’s depositing banger uh so the bones are going to get dropped into our blood infuser

And these bones are basically they’re going to get crafted down oh yeah because i don’t have any blood in this at the moment not really and you can see for the cost of 2500 blood we make blaze rods all right now what we’re going to do in

Order to move our blood up we are going to make ourselves a entangled chalice we’re going to need a gas tier i think one of these for right now will be fine and we’ll be making some more of these fairly soon but let’s go ahead toss that in there

Boom and this setup will probably end up making some productivity some productivity promises that way we can just cut down the amount of blood that we’re using but and then maybe a couple maybe one speed to productivity for this setup i think just because speed is not gonna going to

Be super important for us and productivity will be a bit more useful for us so actually this recipe here there we go and you can see the group is claw to nick two bless if you want to do additional ones that are part of the same group you’re going to use this recipe

Otherwise this recipe to make a new group for this and let’s switch our tank here for an entangled chalice and let’s just put our entangled chalice right in here and you’re going to see the blood is going to start going up because it’s taking that blood uh that’s

Being generated down there it’s taking it and it’s feeding it into here and that way we’ve just got constant blood coming over from you know this area and we can start feeding it into our machines using uh this claw to nick to bless line uh and we’ll make some other

Adjustments to it later but that way we can start moving these things so we’ll just put a a hopper going down and that’s going to start pulling the blaze rods out and then what we’re going to do is we’ll put in our mechanical belt line using our shafts that’s going to go from

Here it’s going to come out to just say right here like that and then what we’ll do is we’ll put in another shaft line here that will then bring it up like that uh and then what we’re going to do is let’s see let’s get ourselves

Brass tunnel can we make these two at the moment let me get another one of these and what we’re going to do is we’re going to have our brass tunnel we’re going to have one i’m going to have to bring it out just a little bit that’s fine

Uh so we’ll bring it out to say here it’s going to be a bunch of short little uh segments but i just kind of want to straighten this out a little bit so we’ll do like that and then we’re gonna have our brass tunnel setting here and we’re gonna have another one

Yeah it can set here and then we’re gonna have another line that sets right here just like that and then we’re going to have a line that comes out here a line that comes out here and we’re going to bring our brass tunnels out like that

And we’re going to leave it on when multiple outputs available uh just split it and what we’re going to do is we’re going to put in these two we’re going to put blaze rods so it’s going to split those blaze rods between those two and over here we’re

Just going to put like gabriel cobblestone or something you know something because we don’t want it to actually go out this uh but basically whenever items come into this they’re going to split between these two different conveyors and then this is going to come out and go on to these conveyors

These conveyors are going to come over and they’re going to be plugging into a furnace and the furnace we’re actually going to bring these over to there so this is going to run just like this and just like this and then at this point they’re going to be plugging into furnaces and

These furnaces are going to be setting right in here and right in here and we’ll put our funnel in here and our funnel in here and we’re going to be saying that you’re going to take blaze rods and you’re going to take blaze rods and then from here we’re going to attach our

Furnace engine and this is going to run we want to run back or forward let’s run it back i think so we’ll have that and we’ll have that because if we have them coming this way they’re going to kind of be weirdly placed i think for this

And then we’re going to come out one block to right here and that’s when we’re gonna put in our flywheel and you could say uh the flywheel basically it’ll connect you’ll see this stuff that comes across and this is where uh our kinetic power is gonna come out once this is running

And then we’re gonna do the same thing over on this side and i want it to connect i want it to basically go this way because i want the power to come in right there once the furnaces start running then this will start generating power

And then what we need to do is just kind of plug all this up and make sure that it’s going in the correct direction uh what i’m probably going to do is uh let me just run one of these for just a moment so if we throw in a little bit

Of cobblestone and a piece of coal you can see this is going to start spinning up and actually the direction that it’s running in at the moment is pretty good so we’re going to run this out to here no not to here to well actually to here be fine

And then what we can do is just run our mechanical belt so we’ve already ran through all of our mechanical belts we’re gonna do it like that now you can see that all of these are starting to spin up then what we can do is let’s run out shaft here

And then we’re going to run out i guess shaft right here and let’s go ahead and get some more mechanical belts we’re going to do that we’re going to do that and now it’s going to start pulling those blaze rods out and you’re going to see they’re going to start getting split off

One comes here one comes there and then we just need to start running this up well actually we’re starting to build up at least the amount of blaze rods at the moment um but the furnace smelting is what gives this power you can see it just

Finished up and this kind of winded down at this point now to get this to flow over correctly i’m going to need either a double gear box or well i’ll tell you what a double gear box actually will work out well enough for us so i’m just going to set up a

Double gearbox here and of course anytime kinetic power goes through a gearbox it’s going to reverse it on the opposite side it’s going to reverse the direction that it’s spinning that’s why we’re going with a double basically just so we can get it back to where it was while still while still turning

Our power around so we’re gonna go here and then we’re also going to And then we will have to connect this up and so the way we’re going to do that is just like so or actually i tell you what let’s do vertical gearbox here so the power’s still going to come through right there and that way we can

Bring the power up anyways from here if we want to do some stuff so we’ll do it like that and that way this doesn’t connect and what we can do is run this across right here i can just use the wrench to rotate it but uh we’ll do that and that that

Okay so now if we were to fire this up this should be totally running at this point so let’s grab eight of those piece of coal and you can see the blaze rods are now making their ways their way up to the furnaces uh where they’re going in and blaze rods

Of course they will smelt 12 items uh so we’re going to be using the bones that are coming from the evil craft system because we’re generating a lot of them we’re going to be using these bones to make blaze rods to then power our create system that’s up here

And then our little foliate guy can just handle just moving this we’re going to we’re going to have a few foliage guys they’re going to be kind of like our our workshop staff if you will okay so the blaze rods are coming in that part of it’s all set up now we just

Have to handle uh what it’s actually going to be smelting and we’re going to be using for now um we’re going to be using just a recycling system that we don’t have to worry about it’s stopping running something you know okay and then we’re going to dig this

Down i’ve got a little bit of space between floors so i can have some stuff kind of go down a little bit here we’re going to dig this down let’s see it’s going to get made there actually it’s going to get made right here uh let’s open this up all this

Floor is going to get fixed up um but we’re going to put in our mechanical drill setting here we’ll put a hole in right there and then right below this it’s actually going to be right down to the bottom of the floor there we’re going to put a shaft in

Well let me just grab my wrench we’re gonna put a shaft in right there and we’re gonna put a shaft in we will do it right here yeah yeah this is gonna kind of come out to this point and basically this shaft is just going to be bringing items up at this point

And then i think what we’ll do since the door is over there we’re going to run it off in this direction and then the mechanical drill which is coming out the back side here gotta love how these things just collect everything like that’s anywhere near them let me get a few more

Shafts we’re going to bring this out honestly probably just grab one of these gearboxes the mechanical drill it doesn’t really matter which direction it spins so we can have that going pretty much anywhere and of course we can speed all this up with cog wheels but it’s going to be

Plenty fast for our needs i think uh so we’re not going to worry about that right now at least so we’re going to run that out and we are going to run out A belt here and that way it powers our mechanical drill so once this starts up then it’s going to start breaking that cobblestone and that cobblestone should uh the way mechanical belts like to grab everything it should grab the cobblestone without having to worry about the lava getting it

And the lava can’t burn the mechanical belt so that works out so what we’re going to do is we’re going to come over here and we’ll make sure that we can kind of get through this room to everything but yeah and we’re going to have this setting here and then we’re going to

Come over like this it’ll make sense here in just a second and then we’ll run this up now originally i had i made some brass funnels and other crafted brass funnels or tunnels funnels tunnels because i was going to have this split off and go on both sides kind of equally

But i don’t think i’m actually going to do that so and this room is going to have some pretty high ceilings so but we’re going to run it to about right here and then we’re going to split this off now i’m going to put a hopper oops

And put a hopper setting right here yeah we’ll have the hopper fade down like that and so that way the cobblestone from this will go up and around go up to these hoppers and get fed down now if we have a block in the way of this uh so

That it can’t go any further it will actually stop up the line and the cobblestone just kind of build up on this line and that’s what we want to do we want to set that up this will be a different block but for now the cobblestone gets stopped here

So if it’s not going down in this hopper then it’ll get stopped up now if this hopper is still collecting things then this part of it will still run but basically from here over will get stopped up and then if this one gets stopped up the stuff can still progress on and that

Way we don’t have to worry about the cobblestone getting wasted or getting stopped up anywhere now what we’re going to do let’s go ahead yeah we don’t have framed drawers in this version do we i think we’re just going to go with spruce in this case we’re going to be doing

Just a little bit with drawers today and in this setup and we don’t have compressed cobblestone in this pack so we’re going to be making just a normal drawer we’re going to put this in right here and this is going to store cobblestone that way we kind of have like

An excess amount stored up in here and then we’re going to have a browse funnel setting here we’re going to have a brass funnel setting here let’s go ahead and get ourselves a drawer key that way we can just lock this in to make sure only cobblestone’s going in

Uh and while we’re at it let’s go ahead and get ourselves a void upgrade also so any excess cobblestone can get voided originally i was planning on making just a closed system where the cobblestone gets broken that’s why i made the deployer but i figured well if i’m gonna

Be doing this i might as well make smooth stone in the process so we’re gonna be making smooth stone also so that should be fine uh and then that way the cobblestone gets sent up uh it’ll get sent up to here we still gotta run all the

The shafts and stuff we’ll get to that the cobblestone will go up here and it’s going to get smelted we should have just a constant flow of cobblestone coming through now at this point we’re going to set up let’s do a line that comes out here and it’s going to come out to

Say here and we’re going to do the same thing on the other side create you always end up with just belts everywhere but trying to trying to keep them kind of clean and so that we can move around in this room with these by having to go

Over the mechanical belts and stuff of course you can cover those and we’ll probably end up covering some but uh and then let’s go ahead and get ourselves i made up some more kelp so let’s get some more mechanical belts just go with as many as we can make 21 sounds good

Uh this is going to come over like so and then the same thing over on this side then we’ll just have to plug all this up to make sure it works actually instead of having it like this let me just break this off and we’re just going to go with a two by

One drawer instead of a one by one that way we can just have everything in the same block space because we can add storage upgrades to this and we’re going to be feeding some of this stuff into our system just a little bit later um

We have a couple things that i want to tackle and then we’re going to be getting into actually limiting things that go into our system because something like this with it running across the entire pack you know eventually we’re going to reach a point where we’re going to have just a ton

Of cobblestone and stone getting piled up in the system if we’re not careful uh so we’re going to be limiting stuff that’s automatic like this we’re going to be limiting the amount of it that’s getting fed into our storage system because we don’t want it to get just piled up and bulked up

So we’ll get into that just a little bit lighter but since we’re doing this we will have to limit this side and say only cobblestone can come out of this but okay this comes over uh we’re going to bring this up and this is going to come up

Well really it doesn’t even have to no we don’t have to do that because what we can do instead is we can bring this over to here i was going to have it come up and go over the top but no we don’t even have to do that

Because we have this belt that’s sitting right over here and we can just dump the items from this belt and they’ll just they’ll just come over and get dumped onto this mechanical belt and go up and get stored just the same as everything else so the stone will just come across

And we’ll put hoppers right there that way they can collect the stone and put it onto this conveyor line now i need to plug this one up to this line so we’re going to do that real quick and these are also going to get for next

Episode these some of these are going to get siphoned off and go into some other places too so we’ll get into that here soon let me put that out we’re not going to be using this area anymore i’m happy to say and that means i can start cleaning up that area between

Episodes because it’s kind of at the point now where it’s getting in my way like really really bad so i do want to get rid of that so this is going to have to get reversed i think what we’re going to do is we’re going to bring it over

To here then it’s going to go into a gearbox vertical is what i want and then we’ll plug that up so there we go that part is done and the breaker should be running uh we just have to start moving the items up from that breaker if we plugged up a

That’s perfect yeah and that way it can start moving those items it’s reversing the line of course there and then we need to move these items what we’re going to do is run this out and we’re going to run this out grab our mechanical belts

And boom now you can see that the stone from this is now getting moved along through here and then we’ll do the same thing on this side like so go and i think everything now is plugged up except for the breaker in this top section and that’s just piling up you can see

It’s dumping it onto this conveyor but we got to get this conveyor moving it’s actually kind of nice saying goodbye to uh that water wheel system i i hate water wheel i wish the water wheels were a little bit more impressive within create they’re kind of dinky to be honest but

No i don’t want you to go that way we’ll put a shaft in here and then we’ll do a vertical gearbox and then that way it can it can move that and then i can bring a line up on this side and it’ll kind of make it look a little bit more balanced

If there’s a shaft coming up on this side instead of it being really lopsided like it is now so at this point we can actually start generating cobblestone nice you could say cobblestone coming up and this is coming from the uh the mechanical drill that we’ve got down there um

Yeah there it comes might need to speed that up honestly maybe do some cog wheels we’ll probably do that here in just a second because it’s kind of slow at the moment it might be fast enough to keep up but i would feel a little bit more comfortable

If we had just a little bit more speed to that and actually right here uh what we’re going to do to get this line up here moving so we’re gonna put a shafting well no i’m not gonna be able to right there am i okay let me pull that off

Uh we could do the shaft setting here though so we’ll run that out and then we’re going to have a shaft that comes out right here and then the mechanical belt brings that over so let’s get that line running and then we just have to plug up this

And then we can just put a gearbox in right here run a shaft out run a shaft out and then our mechanical belts there’s a few other tools that we could use to move that but i think that’s gonna be our best bet and then we can just do this

And then everything should be running at this point so you can see well let me jump start it one last time here we throw that into there you can see actually blaze rods we are backed up on at the moment but this is going to start moving the cobblestone over

And of course it’s going to get deposited into this furnace where it’s going to start smelting up but i do think we’re going to have to upgrade the speed of the mechanical drill it’s way too slow at the moment and of course once again the direction of the mechanical drill it’s not

Actually important to us so what we’re going to do let’s come in that needs to be over one more we’re going to put that there i’m actually going to clip this off at this point you don’t actually need that and we’re going to put in a small cog wheel here okay

And that’s going to speed the breakup speed or the break speed of this and so if we come around now we should see cobblestone coming up at a little bit faster right yeah and honestly i think that might end up being fast enough uh this is one of

Those things we’re gonna have to let run for just a little bit to say for sure i might let this run for a minute while i edit some footage and we can just kind of see we might have to speed it up just a little bit more get a little bit more

Break speed on that now really really quickly before we cut for just a minute let me go ahead at this point i think and let me get just so we can kind of monitor our system let’s get a speedometer and then let’s go ahead and get a stress meter

And well i need two speedometers so we’ll just have a vertical gearbox then it takes out and then we can say oh yeah we never made our goggles did we okay so let’s get our engineers goggles so there’s that gross complete did i have quests behind that yeah actually uh these

It’s okay i mean we’re gonna end up making more but let’s go ahead and just grab it because we can and then we’ll just set that back up okay so if we throw this on we can now see that our stress we are barely using anything only three percent of our system

Our stress is low so we still have fifteen thousand eight hundred and eight stress units out of sixteen 16 384 so we’re not using a whole lot of stress on our system compared to what we’re generating flywheels actually generate a lot of stress units and pretty decent speed of course you

Can speed that up with cogs you know and we take a look at our speed at 16 rpm on this line of course the line that has the breaker is going to be doubled um so it’s going to be running at a 32 speed at the moment if we buff it up

Again it’s going to be like 64 rotations per minute so that should be sufficient if we take a look we are 57 is this still getting cobblestone no it stopped at this point but once this one fills up it’ll be interesting to see if it can keep up

While still producing i think i may have to speed it up one more time okay i made some adjustments to this um for starters i i did a little bit of cleaning up and moved our speedometer and stressometer nothing major there but a couple things that i did do uh first up

If you look down there you’ll actually notice a funnel right there um i noticed that i was getting some cobblestone kind of piling up and if we come down you can see there’s an ender hopper it’s actually attached to a drawer that has cobblestone locked in because i

Had i noticed a little bit of cobblestone piling up when i went down there was like a little over a stack you know it was still pumping out cobblestone um but it a little bit was getting piled up there and i don’t want to waste it so

I’ve just got an indoor hopper that collects any cobblestone that gets stuck on the sides of the conveyors and then that funnel just feeds it up uh you know this line here up to here now you’ll notice that this is completely backed up at the moment um i did bump up the speed

A little bit uh so where we had our original one um i went ahead and moved the cog over to that side instead brought it out to a large one to a small one to a large one to a small one and then it comes back in

And that way our breaker runs very very quickly because we are going to be using cobblestone for some other stuff and i figure well instead of doing another breaker system we’ll just set it up like that and that way we’ve got plenty of speed coming through here

Now in addition i did go ahead and make the promises of productivity as well as the rest of them that we needed down there and at the moment now because i’m not noticing that we need speed um you take a look here and i mean this is

Starting to back up on blaze rods we’ve got plenty of them so i don’t think we actually need speed for up here and with the three stacks of promises of productivity it takes us less than 400 millibuckets of blood to cr to create a blaze rod so it’s down from 2500 to like

346 or 336 i think it is per craft so that’s pretty good that’s pretty good at the moment also i did you’ll notice my inventory is just full of junk i cleaned up all this stuff down here and i did go ahead and craft up some more um mechanical crafters because we’re

Going to be using these come next episode i’m going to be kind of just cleaning this stuff up putting it back in but i’m going to be putting it up here and that way we can clean up this whole area and the water wheels can go

And i can get all this junk out of the way so that i can actually build uh this area of the building so um but beyond that it’s all set up pretty much the exact same everything’s running really really good now that i bumped up the speed and we have more

Than enough cobblestone and stone coming in unfortunately this pack of course we can’t see how much is in our drawers but i imagine it’s a lot so and like i said here pretty soon we’re actually going to start feeding some cobblestone and stone and keeping it stocked within our system

But we don’t have the stuff in place that i need for that so we’re gonna we’re gonna hold out on that just a little bit also i did add another door over here because i think instead of having you go through the machines i think you’re gonna come out and go

Around the machines to this back side so kind of this little like work area and then we’re going to have some of our machines over here but you won’t really have to move through the middle of this so i’m actually going to bring out a wall and kind of

Make this a little bit more blocked in ish as far as the design goes so uh but anyways i know it’s about wrapping up points a little bit past but uh i know it is wrapping up point for this episode so we’re gonna end this one out

Here and then come next episode we will tackle part two of our create system which is actually setting up the limestone and doing a little bit more with create before then switching gears and moving on to another project for the time being so anyways i hope you guys enjoyed the

Episode if you did as always be sure and hit that like button and go ahead and subscribe if you’re not already to stay updated with when new videos come out and i hope to see you guys next time so until then as always do take care stay

Safe and i’ll see you guys then