[Applause] yeah Yo what is going on guys it is bossy here and welcome to another episode of factions Basics on the peak on every this episode we’re going to be covering Base building what is a base generally a base in factions is defined as a private area where any sort of value is stored There are two types of bases in this game mode to understand them we must first understand what claims are in factions teams are able to claim land when a faction does this that claim the area now belongs to them which means that no other team or player can build Or break blocks there this restriction can however re-bypass but we will discuss that topic in a different section of the series if an area is claimed by a faction it will appear on the faction map which can be accessed with Slash anyway now that we know what A claim is we can understand the two different types of bases which can exist in this game mode these are the claim bases and the unclaimed basis unclean bases are just areas scattered around the world where players have made their hideouts without claiming the land these Bases are generally hidden in the sky or underground and are usually private walls for individual players to stab as their valuable loot rather than whole teams unclaimed bases don’t count towards the monetary value of faction on the faction top but can still hold precious items these bases Grant less Safety as they come with no protection but they are also more hidden meaning that they are difficult to find and thus raid these types of bases are usually not useful on Pica since our server provides private walls to basically everyone thus guaranteeing far better safety and protection for those seeking To store their personal items to make these types of bases a person must find a random area away from player activity and hide some storage in it without claims the players should also make sure to cover their steps and limit visitations to this base so as to not Get it located playing bases on the other hand are storage spaces for the entire team the contents of which count towards the monetary worth of the actual faction on f-top generally these bases host large Grinders and Farms which yield a lot of money rather than being stashed for valuable items like their Counterparts these bases grants more safety at the cost of being more visible as they’re located on fmap even though any base which is claimed is technically considered a clean base there’s a specific way of correctly creating such bases to ensure maximum safety think of it this way someone can claim an area And place multiple chests inside of it even though this is still considered a claim base it isn’t very secure now think about covering those chests with Cobblestone blocks now you have added some layer of protection for the value in your base now think about adding another layer of cobblestone blocks then Another then another you are repeatedly adding layers of protection thus making it more and more safe similarly there’s a correct way of making claim basis to understand how to make a good claim base we must first understand a few terms a value box is the portion of the base Which contains the monetary value of the faction things like farms and grinders a base box contains one or more value boxes among other components of the base such as chest rooms you can think of this area as the headquarters of the faction a wall is defined as a singular Layer of protection for the baseball the buffer is defined as the entire area of claimed land between the base box all the way to the edge of your claim the buffer counter is a defensive Cannon which goes in the chunk inside of your base this cannon is used to shoot at Enemy cannons trying to raid you a cannon in turn is a structure used to shoot TNT at an opposing faction so as to break blocks in their claimed land all of these components make up what we called a claimed base there are three places where you can create such bases Bases can be made by the corner of the world next to the world border and any area away from the tool the ideal position is making it next to the corner as you don’t have to worry about the other two sides of the base as enemy factions can raid you from outside the World border on either side a border base is good as well for the same reason but the difference is you have to look after three sides instead of two finally a base made away from the border needs to worry about all four sides some special rules with regards to Base Building on Pika is having a maximum of 20 chunk buffer and a maximum of 160 walls the maximum base box can only be 10 by 10 chunks only one buffer counter should be per side buffer counters can also have walls so you can only have five chunks of walls or 40 walls in Total you can only have three value boxes do not make any normal claims in a 30 chunk radius around your base no mod value Farms can be placed below y-190 these are the general rules for a more extensive read please look at the Pica Network op factions rules I realize this Is a lot to keep in your head when making a base so usually people use layouts which are pre-made blueprints for bases the blueprints help you make the base without any concern of breaking the rules this is what we will be using and this is also what is used by Competitive factions yo what’s going on guys it’s bossy here and welcome to the base tutorial we are here at rip chubby Brian the legend in the community what is going on man where where are you at uh I’m here bro I’m right behind you oh right here sorry Yeah you sort of get Lost because you’re like you know you’re shirt yeah but uh yeah how are you doing man I’m doing good bro how are you doing I’m doing good too man so this is this is the the host we were talking about he was a bit rude to me last episode but It’s all good we made up we made up um yeah so let’s uh let’s get started with this base right um this is gonna be the orbit section of the video so if you guys have orbit this is how you this is where you guys are gonna find out how to Set up a base and generally what you need is a base layout you can do it without one but generally if you have orbit it is a good idea to have a base layout and that’s why most competitive factions do utilize right and um so everything that I’m going to be using in This episode is going to be linked in this in the description now there’s many different types of base layouts there’s not just one you know standard one and it really depends on what’s uh what type of situation you are in so for example right if you’re in a world that Everywhere you know every border claim is claimed into every corner claim is claimed then uh you would need a base layout that you know allows for both all four sides of all right so it really does depend on what type of situation you’re in for that reason I’m going to Be including a Discord that has plenty of base layouts and you guys can actually go in and edit base layouts and in Creative not on the actual server but on different types of servers um you can just go in and add the base layouts if you guys want to make any Changes to those but here we’re going to be using a standard a standard old some sort of base layout I have a partner 2 times 215 so this is a 15 chunk base layout 15 chunk of balls right Kobe um and oh yeah 120 chunks so yeah Right so uh so once you have orbit all you guys got to do is open your orbit folder I don’t know if you guys have okay so this is your order folder all you got to do is once you get that base layout that you want you just want to Drag it in and it should be it should go in the schematic right um and this mod that we’re utilizing is schematica obviously right and this is available for free um on other you know you can just get the mod by itself you don’t really need orbit for this but Orbit does have it built in for ease of use right and what is going to happen is once you click on this uh this schematic right here it’s going to go all the way to the bottom you want to hit control and you want to make it go all the way To the top remember the highest block you can go in um uh in in Minecraft at least 1.8 is 255 so you want to do one less than that and do 254. um like so okay so you see all right now let me click out and this is so sort of The layout this is also a very good tip that YX I mean Kobe is giving out right now do not listen to YX on any factions uh you know any faction advice you don’t really yeah like just nothing nothing in general right and so remember Um this is this is going to be your layout you see how everything is sort of in blue this is like this is sort of what the bass is supposed to look like but there’s nothing there at the moment right um this stuff is red because there’s Something in the way but uh yeah all you got to do is just do that and now let’s let’s take a look at this base layout this base layout only allows for two walls so one is going to the North and the other one is going to the east so Only two sides of walls right and this is quite obviously a um a corner based layout so what we want to do here is we want to sort of align this to our corner you guys see this here this part isn’t actually um yeah so we want to sort of align this Um what we can do then is just go back to control right and we want to roll rotate this alright so to rotate it uh you want to hit rotate rotate so control we want to hit control and now that we have rotated it to the right spot and by The way all you got to hit is this rotate button right over here all right and then now you will want to move it to hit the actual border over here right and some stuffs are some things are in Red is because we are actually on top of water at the moment right Um we couldn’t find like a good corner to do it on because it’s the end of the map but we’re gonna make do with that you don’t have to really deal with that you can uh you know change that later on um but as long as it’s in 254 we should Be good so we’re gonna go back to our schematic controls and so we want to now move this to the to the right or to the left so we can do that by changing the yeah you can use your keyboard bind also yeah you can also use your keyboard Button if you guys have that bind it I don’t know I I’m pretty sure I have it behind it but again these are y-axis settings there’s a big fall to my own for uh asking for his settings but this is what we’re gonna have to deal with Now right and you have this minus per button if you want to go forward you can do plus right and it’s going to go this way and if you want to do minus you can make it go this way as long as it is touching the barrier okay this is a bit Out so let me go back to the controls and we can do this and what is it yeah so this should be touching it right and now we want to bring it back you know we want to we want to hit it back uh wrong wrong Choice of words but this is you know you can sort of like guess and check right here so it’s going forward this way so this uh must obviously mean the plus sign is what’s gonna bring it back um and we’re backing it up here as we Speak we can spam it a little bit but you can use your keyboard this thing Direction yeah now you can use your keyboard directions I’m pretty sure okay so yeah so Kobe just pointed out I can just use my arrow okay so you just need the arrow Keys mod enabled right and so you can if we were if you’re trying to make it come back here we can just do this this either way you guys can sort of guess and check where you want to place it but with this layout we need to have it Touching with the corner claim over here now again every layout is different it really depends on what type of situation you’re in but this is generally how you would set up a a um a layout right and so once everything is set up here what You want to do is you know now you’re good now you’re good with the layout now you want to actually start printing things and what you can do is you can go in slash printer right and once you’re in printer not let me let me share my uh Printer settings with you guys right you need your new printer settings um again these are y-axis settings it’s a very you know it’s unfortunate that I I took them but this is what we have to work with here right so if you have enabled limit packets these are all um y-axis Settings this is how he doesn’t get banned uh let me rephrase that this is how he doesn’t get banned for a printer um but yeah so this is the settings right and so we need to make sure that before printing never be in um the regular Survival game mode right because What’s going to happen is you’re gonna get banned from Pico now I know other servers might not have this issue but what Pico does is that it bans you if you are um sending like a bunch of packets in on Survival so you want to make sure that you are in printer when You do this and all you need to do is come down here and at the moment nothing is sort of attached you see how this is in midair this obsidian that’s supposed to be here um isn’t touching anything it’s it’s in the middle of like air basically right So we can we can just so so to actually make touch we need touching to initiate um really touching to happen right um before uh before before we start printing why because this is an middle of this is just in the middle of nowhere just literally not not touching any block Right and so without without touching a block we can’t really print it needs to be standing on something and our suit obsidian gen is is coming up um anytime soon hold on let me do a let me do a quick cut great so it is now touching a block here And all we need to do now is print it you see how this print is going on right here we are just printing everything right um yeah this is all you sort of need to do and you know you don’t have to take out any blocks because it’s going to Take care of it uh the you know doing slash printer is going to take care of it and we can just print this whole thing out just like so okay guys so we are back from the cut and you guys can see at the base is coming along pretty Well here right um some of it is water the most most of it is not watered right but the important thing to know here is that and we didn’t fully complete the base because there’s you know again we pasted this on top of our old base so There’s a couple walls remaining but you know this is just to get the gist of what what you know what your guys’s base should be um and so you guys you know you guys should highly advisable to actually print all of the walls in but uh yeah we’re just doing this for demonstration Purposes um anyway so we got this going on and um now we need to get to the important things here right so you guys can see that these are the walls um we have the obsidian uh you know we have the obsidian and sand the sander You sort of used to Mark the chunks and you know how far uh they are in because you know when sand falls down it’s sort of it it is a marker as to how far a cannon or like someone that’s trading your base is is in right so how far they Are in so it’s sort of used as a marker for that um and you know they’re also protective now these are sort of like flat walls right and uh Kobe you might uh elaborating on on this a little bit so um basically on competitive servers okay Shut up shut up shut up okay so uh um we are sort of under the base right now Kobe continue yeah so on competitive servers you don’t need to print the walls in uh like all the walls and obsidian walls because you can just hold the Block in your hand and Just turn on printer and gender Basin but on Pika and uh jar text Network it’s um you need to hold the block you need to hold the block uh if you hold the Block in your hand and start printing it you’re gonna get banned for cheating so On Peak and jortex just print the whole thing in and then manually place the Gen blocks just like this yeah so just as Kobe said um what what it’s it’s just like we printed That Bass layout you saw how fast that was we can’t really print All the walls in that fast right and so we need to manually go in and print these walls or and place to place gen blocks for these walls now if you guys don’t know what gem block is you guys are new that’s fine um if you decide gen Um these These are the selection of gen blocks you have and it’s it’s just what it sounds like right so a gen block is a block that generates all the way down or all the way to the horizontal side so for example if I do this right here Um this will go all the way down you see that um it’ll go all the way down to the bottom and these are your walls okay so this whole one section complete one section would constitute a single wall all right so let’s let’s do all that real fast Um so as you you guys can see this is a bit time consuming right so uh you know all the way down this constitutes a wall okay so one once it prints all the way down constitutes a wall and this sort of takes a long time so what people think Is that you can just you know print in right Kobe that you can just use printer to also gen these uh these walls in which isn’t possible on Pika it’s possible on most other servers but Pika has it so that you get banned for cheating and I’m pretty sure that’s Unintentional but you know that’s because staff’s problem they need to fix that uh but yeah so what you need to do is you need to manually go out and place um gem gen blocks around the layout or underneath the layout and these would constitute your walls okay okay guys so One more thing quickly to add as you guys can see we have the dirt gen blocks we have the Cobblestone gen blocks you have the sand gen so these are called gen buckets gen block gen bucket same thing right we have the ice ones um there’s an important distinction in all Of these in that they have a Pacific or sorry not pursue that’s they have a pseudo count they have a pseudo counterpart right and with the pseudo counter part is is that it’s sort of ignores all of the blocks that are already there and it takes those over Over to it’s sort of like um your ex Kobe so uh it it sort of sucks the life out of everyone everything around right and it just takes over and just joking because Kobe does not have a name but uh so uh like let’s do this for example Um let’s say we have a uh we so this is a regular gen bucket block right oh sorry about that uh hold on let’s see say this all right so if we do go if you go up you see how it stops at this block now if you do the same Thing we try to do the same thing with sudo um this wouldn’t work right it would just eat the block up um so let’s grab this here this is the pseudo one if you go up like that and you see how it just takes over that Block so now it really depends on what you’re doing here um you know if you have a cleared out area um you don’t really need to uh you know you don’t really need to do that uh it really just depends on you know what what you’re dealing with you Can you can do gen regular gen blocks or pseudo gen blocks one more thing to note here is that um our base is fully chunk busted or are like we’re fully chunk busted to the ground here and um Kobe what’s more advisable is it like like should we chunk bust all like should When we’re making walls should all the walls be touching like Bedrock level or uh can they just stop at like the ground they can they can potentially one shot they should all be touching Bedrock because uh as soon as it depends though once you start a map you need to make Sure you chunk bust everything your entire 20 chunk buffer and then you gen your Basin so make sure your walls are touching to White what you need to make sure if it’s not touching white one there you’re basically get one shot yeah so so that’s one more important thing That we sort of glossed over here is that your base should be chunk busted all the way down or chunk busted what chunk busted means again if you don’t play factions is uh it should be uh you know all the way to the ground it should Be cleared out all the way to y1 right here right it should be cleared out all the way to the ground you can do that easily if you have um things like uh chunk Busters right so these types of things they just chunk bust everything within within the radius All the way down to the ground all right and you need that for your walls your walls should be touching what I want right they they shouldn’t there shouldn’t be any sort of gap between there because that might be detrimental um when you’re getting rated so once you Guys are done with all of your walls and you know you know everything that’s there what you want to worry about is your um what you want to worry about is your value box as well um and how how big should the value box speaker be in your in your estimation uh It depends because Pika is mainly like a spawner basic uh economy so normal value boxer like five by five six by six to like make sure you have all the spawners you can place all the spawners because it’s like a two by two your spawners are not gonna they don’t be gonna work So what do you mean by five by five five blocks by five blocks uh no five chunks okay freaking say that they should be and should they be touching the ground I don’t think sorry no uh it needs to be touching to a point and then under that You need to gen your revelers all right boys so now that you know Kobe and I have ginned the actual value box this is how the revelers look like they are sort of like basement protection that we talked about in that one episode so Kobe what are revelers um yeah uh they’re Basically to stop you from getting um revved well what does REV uh TNT shooting from the bottom from y1 it shoots up right so what Kobe’s saying is that if they what you can do on Peak and this is going to be discussed more on the attacking episode Um is that you can shoot at different speeds depending upon where you’re actually uh shooting from right what why level you’re shooting from okay and so usually the value box is a bit higher so what what’s required on the service I Peak is that when you’re shooting from Like you know you know let’s say why you know with 200 or whatever you’re going to be needing to use like a two second Cannon or a three second can um but if you’re all the way down at Bedrock level what you can do is you can Shoot a super fast Cannon why is because there’s no value box under there but what people usually do is shooting that super fast Cannon is that you can you can you know go through all the walls hold on let me let me show you guys so Let’s say these are the walls and you’re you know you’re shooting with your super fast Cannon is going through all these walls one by one and you’re gonna reach this this part of the area right and what you can do is you can vertically shoot upwards right Kobe uh you can Shoot TNT upwards once you have breached like the bottom part and what red layers do they help protect from those types of attacks they’re like basement protection right and so how do they work again Kobe like what like what do you need to do to make revelers Sure like there’s one one block Gap and you can make sure it’s watered yeah need to be watered so if it’s dry then they can still if you have like 50 revelators but they have no water in them they can still uh one shot you but if you have Like uh like 50 rev layers and it’s all watered then uh they’re not gonna be able to revenue unless they use like a ramp hybrid do these Corners matter um where like like you know how you have these Corners here uh no it doesn’t matter okay you probably need to mind Them but yeah it doesn’t really matter okay got it and so how many Rattlers are advisable on on a base um on Pika I would recommend around like uh 30 30 to 20 rufflers that’s like a c but because hatching the one stack the 0.2 SEC the Cannon which shoots at that though I should be easy on Gap or PVP all right guys so now that we’ve shown you guys all that let’s go to the buffer counters which are usually located diagonally from the main base and the buffer counters as we discussed there’s already A mini cannons inside of your you know base claims right and so whenever you’re getting shot at um you can utilize these cannons um to shoot shoot back at uh at the opposing Cannon space right and yeah so these are where those they’re located in the base layouts Um they’re usually diagonal from the from the center of the base and they have their own individual set of walls right Kobe and this is the sort of top of it remember there’s nothing really underneath it at the moment and that’s something you guys have to make on your Own depending on what type of Canon you use right this layout requires that you need a 13 by 23 buffer counter and to see and and so your Canon should be within that radius right it could be like 13 by 23 should be within that area um you shouldn’t pick a cannon that’s Bigger than that um and so so you can you can check uh you can check you can check that easily by just counting these uh so how so the length times the width that’s that’s sort of the area you need your cannon in all right so how vertically big can the Buffer counters be like can they be like yeah but I would recommend it be as short as possible like you know at least like why two two like 200 or 210 so the people waiting the shooting at the buffer counter will not have that many Y coordinates to adjust to so it’ll make It harder for them to breach a buffer counter okay let’s try to get a good buffer camera scam that make sure that that only reaches like around y200 so the people rating us can’t really adjust all the way low and reach into our buffer counter but it doesn’t be harder for Them yeah it doesn’t that work in you know conversely too where like we can’t shoot at their uh their Cannon yeah but technically it’s better for us because they their main priority is to take out our buffer counter to survive but we can switch between buffer and side so okay To keep like you know pressure on their Cannon box right and so this is Kobe he’s now right now printing a a canon in within the buffer counter and you guys can see it’s not completely in but that’s sort of fine um and all you then have to do is sort Of cover this area up right um yeah and you should be good you should just make you know a couple walls here and you can fill in these walls as well to to protect that buffer counter and yeah that should be it this this is gonna be the uh The bottom of the cannon right so yeah you guys this is sort of all self-explanatory at this point right Kobe um yeah like you just get an idea of it this is like a Quick Print but normally you would print in a like an actual buffer counter in here this is just show An example like what’s supposed to be in the Canon and you know buffer counters are going to be explained a bit more in the actual defense section of this series right Kobe and uh yeah we should be good with that now let’s get back to The top of the base and once you guys have printed in all these essential things remember you need to print these things in first right and then once you’re done with all that then you have to water the base now we already have some water going around but that’s Because we we you know we pasted this on top of our old base and that’s why we have this water generally you won’t have water on top of your base okay and so what you would need to do is you we need to manually put water well you can use You can use infinite water so if you were so if you do such shop right and go into uh going to miscellaneous blocks you can use this infinite water here and you and don’t make the mistake of doing the eye stuff because I did that one time and That was literally so much work to to to fix but uh yeah use the infinite water and just spread that across and you guys should be good um with that so now that we have that what we want to do is trade okay and now training this is why we have this Netherrack here right not just because it connects everything together it’s also because you know you can place water on it and you want to get rid of this Netherrack once you place water over your whole base so what you’re gonna do is do size shop and go to the The the red zone section and you can buy another rack right and you can just tray all this stuff out where you can trade all this another account now this is sort of time you know you know it requires a lot of time to do this Kobe Is there a fast way to do this or is this just you know uh you could add efficiency on your trade pickaxe but yeah yeah I mean this is as fast as it can go yeah so you would have to then finally trade all of those things down and now Remember this is a lot better I mean your base is going to be very secure once once you do all this stuff and you know you guys are gonna be in in the clear to at least not get easily rated all right I mean you guys still yeah Because remember factions are the most competitive game mode out there so this is why um a lot of this stuff is required but you know the the rewards you get from it is a lot too right so it sort of balances out this is how you can Make a base if you don’t have a layout yeah you need a manual so it’s a it’s a bit tricky to do this without a um you know build out schematic are in a base layout but what you can do is you can just manually do this all this stuff so You know whatever however much you would want your value box to be let’s say it’d be like you know five times five chunks so I mean this isn’t even five ten five chunks it’s like well one chunk uh yeah so one one by one chunk and you can sort Of make a small little base going here without a base layout right as you guys can see Kobe is gending the walls in like so and you don’t really need much for this I mean if you if you just like you know want to store your value for a Bit in a certain temporary location you can do this without a base layout but yeah it’s nothing too complicated you just need one block gaps and but the the problem here is Kobe is that you’re doing this um on on ground level right so preferably wouldn’t you want it to be Yeah I mean yeah yeah it would preferably it would be yeah but uh that’s just the gist of it yeah like a random thing yeah yeah it’s just sort of like you know going going with the flow here without without debate Basel right you’re just you know doing I mean it Gives you more room but uh if you want things like you know buffer you know buffer counters or revlars yes more protection it is very advisable to use a base layout regardless of you know what basically like even that 15 chunk bass layout is a lot better than doing this But individually right and so that’s why it’s advisable to get either orbit or schematic or stumble client that has some sort of you know schematica built in if you don’t have a factions client you will need to get schematic up by itself to use these layouts the Following clip will help you with that alright guys so this is the portion of the video for people that do not have a factions client and still want to use base layouts with schematica what we’re going to do is directly install schematica by using Minecraft curse Forge and three specific clients all of Which have to be on the 1.8.9 version we’re going to be using the lustrous core client something like that we’re using OptiFine 1.8.9 and we are also using the schematica 1.8.9 so you guys can install Forge just on this screen just just like I’ve done right we don’t Have to do anything with valorin and you can also install those mods you can do it separately or in one link with the Google Drive thing I have set up in the description either way is fine but you guys gotta have one of the all the three Mods with you all right and so once you’re done with that all you guys got to do is set up your Forge profile right and you can hit Minecraft and create a new profile and this also has to be on 1.8.9 you can just hit create down there And that should be it right and then you want to go into the settings of it and then hit mods you want to go into the mods folder and just paste all those 1.8.9 mods inside and then you should be good you have everything set up now and You can just hit launch and play Minecraft and there should be a version for this for T launcher but all you got to need are those three mods and you guys should be good okay guys so we now have schematica the original schematic I loaded on two are you know regular Minecraft clients so this isn’t any you know you know orbit stuff like that this is just a regular Rose camera Attica these are my printer settings right and yeah just just utilize these um in the future when we do start printing cannons and stuff I I might Change these settings a little bit but for the overlay this should be fine you might have some trouble printing the Cannons but uh yeah mostly should be all good um yeah so let’s get into the actual uh Pico world where I’m gonna demonstrate this one more time it’s not too Different from the regular way you print on orbit orbit just has a bit more settings and its printer is more refined but you know this still works this is a bit of an old um schematic a version I believe this is I mean this is 1.8.9 right so it’s a couple years old Um but yeah it sure still work fine now um so so I you have so if you go to the control section you have a bunch of you know controls you know this is where the controls are obviously and you can load the schematic you can manipulate it and Yeah you can set all these for me the load is inserted so I’m gonna press insert and then I’m gonna load in this one here all right and yeah so this is the schematic I just loaded in some random chunk you know I’m just showing this for demonstration purposes what you Want to do do slash fly and uh you can still manipulate the schematic hold on let me let me uh let me uh let me let me okay yeah so you can still manipulate this schematic and you can move it uh down which we don’t want to do you can Move it a bit to this way you know a bit to that way you can do this and that all right you can also uh um I believe flip these or rotate these all the above all the options that orbit has or most of the most of the ones you actually would Need right and so yeah that we should be good with that and all you want to do is do slash printer right and we can just uh hit printer on there’s a setting I have again from the control set to my keybinds for printer on um toggle printers yeah so it’s delete And all you want to do is just go in and look at look at that it uh it places everything as fast as possible all right um MERS guessed it all right so much if you’re watching the video you’re you’re you’re right but I am recording a factions Basics episode and yeah so Everything should be good here um everything is fine like this you see that so yeah oh that’s literally all you need to do um with the regular schematica it is a a down a bit of a downgrade on options but it still definitely works and this is Sort of all you need for for the layout again right so if you don’t have orbit yeah just utilize this you should all be good you might have some trouble printing the canon in but we’re gonna cross that bridge when we get to it but yeah Um outside of this I this should be it actually so I’ll see you all in next clip big shout out to lapien ninja peer repair as they have supplied all of you with free base layouts and buffer counters please use them if they fit your situation otherwise you can also Use the Discord link of Canon ink Paradise to find other things you guys need other than that I hope you found this video informative and I will see you all in the next one peace Video Information
This video, titled ‘(Pika-Network OP Factions) Base Building | Factions Basics #2’, was uploaded by Bossy on 2023-06-12 15:36:47. It has garnered views and [vid_likes] likes. The duration of the video is or seconds.
Game-Related: ⭐What is “Factions” ?: Factions, is a very competitive, tedious, and strategic game mode in which a player must …