Hey everyone welcome back hope you’re all doing well today we’re doing a tutorial on the acclimator from the republic era in 1 to 10 scale now you probably know by now that i’m making the one-to-one scale version of this which is over here so yeah you can see just how colossal that is But yeah this is uh the one-tenth scale one today that we’re doing it’s still pretty massive like it doesn’t feel like it compares things like the venator and the isd but it’s still going to take a while i’d probably say over an hour um but i guess we’ll see When we actually do the video but yeah i mean there isn’t much to say about it it’s not the most interesting looking ship it’s just got a single bridge on top um It’s got engines on the back and we will be using the section system as usual and probably do the engines either at the end or just in one take basically uh get those out of the way oh yeah we’ll uh we’ll see when when we go on to the actual tutorial yet again And yeah like i said it’s just it’s not the most interesting but it still looks um still looks pretty nice but yeah with that let’s get on to the actual build and onto the first layer so on to that right so as usual building towards the purple and green crystals that’s Gonna be the front of the build uh towards the bottom of my logo the materials you need for the first layer are stainless slab stem brick slab and smooth stain slab and then a temporary block as well and just use the temperature block just So we can kind of get the outline of of this bottom layer just so that we get it right first time i’m gonna start with the temper blocks and we’re gonna do uh one two and three separated by one block in between should be five in total and then do Another one and another one that should be i want to say seven now i can’t remember no nine one two three four five six seven yeah nine it gets confusing when you do it like that and then just do another two here to make it a corner And then again another two there to make that corner like so then we’re gonna do one two three four and five on their own like that then skip another one and do a corner and then we can just bring this across again like that and then the same again here So you should have this so far and if we grab the one tool and measure this out it should be i think it was 11 in total we got there by 15 okay so if we go to the back end of this now we’re going to do stain slabs all the way across Oh you will also need an iron trap door before i forget that there we go so you’ve done a row of stone top half slabs all the way across we’re going to then replace this temper block with a iron trap door and then we’re going to take our stone Slabs again on the front side we’re going to go across again with our stone slabs and then we’re going to take our stone slabs again right in the middle and just do one two three four five and then to the side by two there and two there so you should have a full Gap here like so okay take your stone brick slabs now and you’re gonna do one two three one two three and then three stone slabs three stain slabs again she’ll get this so far and take your stone brick slabs and we’re going to go to the middle one two Three four five then bring that across join up there bring that across join up there and then join that up should leave you with a four by three area left over okay smooth stone slabs now all the way across the left and also right hand sides of that And then once we have done that that’s going to be it for the first layer so again we’re just making sure we’ve done this at the right measurements it was 15 by 11 just make sure you’ve got that and then if you have we are happy to proceed so let’s go All right so next layer up we’re going to take these materials stone polished underside light blue stained glass polished underside stairs stone stairs stone slab smooth stone slab red nether bricks and red and the brick slab we’re going to start here where we left This sort of hole i’m going to do a 4×3 with the light blue stained glass this is sort of the underside hanger this was seen in the clone wars uh version of the ship i don’t know if it was there on the attack of the clones model i don’t Think we ever got a good angle of it but yeah it’s there on the clone wars model so it’s in this build uh anyway grab a polished underside and do a circle around that just all the way around perfect two stone on the back here and then a Stone stairs just there like so i’m gonna take our stone again it’s gonna go one two three four five six and then take red another bricks now and we’re gonna do three of those and we’re going to go to the side and do i think it’s seven in total So there five six seven so it’s a seven by three and then we’re gonna take our red nether brick slabs and do four that’s gonna be four by seven there we go now we can get rid of those two for this layer we don’t need those anymore we do need however black stone Uh polished and also black stone polished stairs two black stone there and a stairs on the side and then again two there stairs on the side and again you can get rid of those for this layer next up grab the polished underside once more we’re gonna go here and do one Two three four one two three four and then take the stone block and we’re going to do two there and then bring this all the way back just to there basically covering up all the gaps like that okay gonna then take a cyan terracotta that’s going to go just there and also here And now it’s going to be polished underside stairs and stone stairs we’re going to do stone ones one two three four polished underside ones one two three four stone one and two and then polished under side two okay and then take your stone slabs one here skip four do one here skip one One there and then one on the end here oh actually delete that one put it polished underside stairs there should be kind of overhanging slightly then we’re just going to do a stone slap on that and one do a smooth stone one here skip one two there one there four here And this last one is just gonna be a polished and the side slab in there okay same again on this side so it’s gonna be uh what was it stone one two three four four polished underside two stone two polished underside that one goes there stone slab one smooth stone polished underside slab Too smooth stone smooth stone horse down there and a normal stone one here that should be uh perfectly mirrored over now i believe there’s something in this gap actually but we’ll uh we can come back to that it’s not really a big deal but yeah apart from that i think uh I think that’s it for this layer so let’s move on to layer number three all right so i figured let’s start this one off with these materials polished underside stone sand terracotta the bricks polish black stone polish blacks downstairs down slam that redneck brick slab and polish black stainless slab Start with the polished underside do one two three four five six seven eight of those one two three four five six seven eight of those just like that and then i’m going to take our stone slabs now we’re going to do four top half ones there like that And again one two three and four then take the red nether bricks i’m gonna do one two three four five and five and just keep doing that five there we go and then next up take the red nether bricks labs and we’re gonna do a Four by five i think it yeah it’s four that’s three and four there we go uh next up go to here i’m gonna take our polish black stone do two of those then two here as well then this is going to be a stair and that’s going to be a slab Just there like that take the polished underside again do one here skip two and then do four and then uh do two stone blocks here and that’s fine for now grab the cyan terracotta we’re gonna do just one there you can take it all the way across to the other side Like that and we’ll just uh copy this over as well like so and i’m going to grab the uh we didn’t copy that bit over it it’s fine do it quick now one two two one there and one here so that’s fine and then we’re gonna take A block of smooth stone i’m gonna replace the red nether brick for now i’m gonna do two here and also two there and again and the final thing uh well first do this here it’s stone on either side and then a polished underside in the middle and then also take a polish underside Slab now and we’re gonna put one just there on either side now get a selection of stairs here we’re going to take polish undecide stone and the site and that’s it actually i think one two and three and then you can technically do this in any order but i’m Gonna do it based on my reference model there’s gonna be two underside skip three one underside there skip four and the last three should be uh polished underside uh on these gaps we’re gonna do one stone there one stone there leaving two in the middle and then one stone here and then two Underside stairs in the gaps same again on this side three um and then skip four and do one and then skip two and now three and then do two and same again on this one yeah this build um i think i underestimated it because it is gonna be A pretty long one i’ll be honest with you um definitely i’d say definitely most likely gonna be over an hour at the very least all right so now we’re just getting slabs stone smooth stone and polished underside and also normal underside as well we’re going to do uh stone there and on The other side and then it’s going to be full polished underside on the front side one here skip one and then do three and then it’s just two smooth stone slabs and one there as well so i guess you didn’t need the underside ones i just got it anyway And then we’ll just do the same on this side there we go and that should be oh no it’s not everything actually there is one thing i was going to forget but i haven’t do a temporary block there skip one and do two skip one two and skip one And two it should have a three sets of two and just one there then you’re gonna take a i’m gonna have to zoom in on that i think hang on so it’s two stairs facing each other stone uh there we are stone facing each other like that and then now Just do a temporary block on any side so i’m going to do on the on the right hand side technically and then just do one two three temporary blocks like that the first one should be on the stair that’s facing backwards and then just take stone slabs and bring That all the way to there and that’s perfect so it should be one two three four stain slabs in total there we go and yeah once you’ve gone that once you’ve gone that hm that doesn’t make sense once you have done that uh more light then we’ll move on to the Next layer so yeah let’s go on to that so for this one you may as well keep the materials from the previous layer that we left off with which it might differ what you’ve got here but i’ve got stone polished underside cyan terracotta smooth stone smooth stone slab stone slab Polish on the side slab and stone stairs then also the temporary block which we might no actually we don’t need that again so just instead grab what else can we use um maybe no yeah we’ll we’ll get it when we need it okay don’t matter Do a stone here right on the back on the tail and do one two three four extra so it should be five in total then a polished underside and i’m gonna do another one two three four stone like that go to this other side and do another Stone another stone and then a polished underside in the middle and then do a stone stairs just next to that like so and then also just do one here and then you’re going to take a stone slabs and go all the way across just like this you should get that now So it’s joined up which is always nice get the cyan terracotta now i’m going to go all the way across here like so and just take it uh one past what we did before i think so it should be there yeah i’m gonna take a polished unsight slab Put that here and then another uh cyan there and there just like so and then now we’re gonna do our full blocks to start with so stone two of those uh full blocks of smooth stone four of those two stone one polished on site one stone one polished underside And then now we’re going to go to here and this is where we do the black stone section again we’re going to do two black stone full blocks here and one there and then also one here and then just do let’s see i think it’s two there as well Like that okay but then we are gonna change uh one or two of these in a second uh also grab a blackstone stair that’s going to go sideways this time the blackstone slab is then going to go here and then there’s going to be another I know that’s not a full block but i can’t remember what it is uh i’m gonna quickly fly every one second i tried to remember but there was a lot to uh a lot to think about it’s here um i think we’re on that one aren’t we Yeah so that stairs fine that’s labs fine so it’s that one yeah it’s just a uh a slab instead of a full block so there we go like that uh i’ll do the same on the other side because otherwise i am going to end up just forgetting it again There that’s that goes here and then it’s one uh two and then two there wasn’t it yeah that here and then this one goes there and then we’ll just copy these over as well while we’re here there we go okay next up right let’s do the kind of outside of this now So we’re going to throw away the black stone we don’t need them for this layer let’s take our polished underside stairs our underside stairs and our stone ones as well here we are and uh for this one i have one two remember to go past the slab as well three Four um oh actually now i’m doing the wrong bit so it’s uh two polished underside start off with two stone then another polished underside easy little fix there two stone one polished two underside and then three polished and then it’s gonna be for the slabs now that Uh actually i’ll do the stairs on the other side before we move on otherwise i’m gonna get back tracked a lot two one one there another one there here two of those three of these yeah so throw these away now the stairs and just grab the Uh i think there’s so it’s just a stone and a site well polished and smooth stone on this one we’ve got the stone and the smooth stain let’s just grab the polished underside that’s going to be six i think one two three four five six yeah and then three polished and then Four now so three smooth slabs and then a stone slab again same thing one two three four five six there we go so that’s the uh the back part of that done now let’s grab ourselves a iron trap door and this is where we start to do kind of The um inner tape for the bottom side of the like massive triangle section so yeah let’s uh let’s do this one two three are gonna go there and then at a diagonal it’s gonna be three again then a diagonal it’s gonna be three again like that same on this side three One two three one two three and then we’re gonna take our stone blocks and start from here and bring those all the way to there and we got a bit further to go in a minute and but we’ll do that in a second same again here Just like that now there’s i don’t know if i don’t think they’re full blocks i think some of these are stairs and slabs um i’m not gonna fly over again i’ll just um leave it for now and i’ll do a quick jump cut at the end of Of this bit and yeah sadly i forgot to take a picture of those cause i’m stupid grab polished on site and we are going to do uh how many is it start from start from here and do one two three four five six seven eight so it should take You up to the front of the red nether brick same again on this side and then we will do the red nether brick section in a minute as well we’re gonna first take these stone up to there again and then do four stone slabs like that And then it’s going to be four red another bricks by i think it’s how many is it this time five yeah four by five so as you can see it is tapering in woods as we go up which is uh it’s meant to happen part of the Part of the process and we’re just gonna do another four by five with the slabs that’s three four okay it’s going to be a block of i think it was polished underside polish undecide i can’t remember what’s there it was let’s just say it was a and the site wall probably wasn’t And then just the rest is stone slabs there we go and yeah once you’ve done that though that is uh gonna be it for that layer so let’s move on to layer number i don’t know what we’re on to be honest one two three four onto layer five yeah right so Again next layer up this is uh where it’s starting to get kind of difficult uh if you didn’t think it was already it will be now so uh after this layer we will be working on basically the entire sort of underside of the ship and by that i mean Like the giant flat area which is basically the entire length and width of the ship so at least we’ll get that out of the way but it’s going to be difficult we’re going to start by i guess we’ll do the tail uh section first we’re going to start with stone smooth stone Polish and site two stone one polished three stone uh smooth stone three polished uh smooth stone full polished smooth polished stone then this is going to be cyan terracotta all the way across again and i think it’s plus two on either side at the end uh so basically to there and then taking A polished underside slab yet again just like that you can see where the gap for the engines is as well which is good it’s going to basically be here and there’s a couple of other engines but again they will literally take a couple of minutes to do those Um so we’ll get to them eventually uh come into here it’s gonna be smooth stone one polished smooth stone two polished smooth stone two polished two polished this one is gonna be uh all full blocks of blackstone it’s gonna be two here and uh oh no not there Take wait yeah it is now two polish blacks down there two here as well and then also two there like that do uh same thing again on this side it was uh like not like that was it no there we go so polish block skip to the polish skip two polish skip two One there and then the rest is smooth isn’t it yeah there we go and then now take your iron trap door again i’m gonna go to just here next to the undecide block and do four of those and then at a diagonal it’s going to be three and then diagonal three Diagonal three and just keep going um until you reach it’s around here i’ll just count how many there are in total so it should be uh including the one that’s made of four iron trap doors it’s one two three four five six seven in total we have One two three four five six so one more just there like that on the final one um grab a stone and we’re just going to do one there a diagonal like that and then two hand trap doors next to it like so okay take the polished underside now and we’re gonna do Uh these should be three in the middle all right so it’s gonna be uh yeah one two three four five six seven eight and again eight take the red nether bricks and this time it’s gonna be three in the middle and it’s a three by four And then again with the slabs it’s going to be a three by four one two three four just like that okay and then take these stone slabs that’s going to be here one two three four and four again like that now we’ll just copy the uh kind of slope Over onto the other side so let’s do that and exciting news for halo fans as well i’ve just finished a a new halo build a one-to-one reach version of the pelican it’s a brand new build and and i will show that off probably in just another video that’s more halo Related because obviously this is star wars but i just wanted to mention it so that you know despite the fact the majority of the videos nowadays are star wars i’m still doing halo stuff and obviously towards infinite we will start making a lot more stuff so you should have this now That’s great then grab yourself some stone slabs and you’re just going to do three behind every single set of these uh aim track doors like so i think that one is just stone blocks so that’s fine and yeah bring bring the stone all the way back to the same level as the underside There we go and again we do the same thing oh yeah halo star wars whatever you’re into you know i’d work on both of them and obviously i just do a lot more video releases of star wars at the minute and then literally the rest any gaps here can Just be filled in with stone so literally like this simple as that there’s no block variation in this section which is uh which is fine it doesn’t have to be everywhere i mean if i didn’t have all this block variation like like that and all these different types of stone It looked more boring but then the tutorials would be so much shorter yeah way easier and then i would also recommend covering up these uh trap doors with stone as well and or actually just to differentiate it a little bit let’s turn that into underside so it’s just these ones i think wasn’t It so one there yeah just three three and two two three and three there we go just to give it a bit more a bit more depth from the underside uh i guess coming to here we’ll do the the stairs now so again it’s gonna be the Polished underside the stone and the the normal underside this time i’ve got two polished underside here and also one just there skipping two skip one skip two skip one and then stone here two stone stone two underside and then let’s do these slaps for that Layer now i should have done it on the other side i’m gonna do that quick it was uh what was it two and uh polished on site two normal underside and side there stone and two stone two on the side one stone one on the side there we go and then yeah Let’s uh do the slabs now like i said before i was rudely interrupted by me missing those blocks it’s gonna be one stone here and also do two stone there as well and then one on the end then take the polished underside slabs do two here And and two there and then the rest is going to be smooth stone so four and one do the same here one there uh one two three four polish down the size those two i’ve been playing the um 1.17 snapchat at snapchats now snapshots recently and very interesting the caves are Phenomenal you got to play them i might do a playthrough at some point because it is looking to be one of my favorite updates especially with the new world high it’ll be fantastic but yeah with that high note we are i think done with this layer so let’s Move on to the next one which is going to be a real a real stinker so let’s uh let’s go into that right so let’s uh let’s make start it’s absolutely a lovely layer we go to the back stone three smooth stone two polished underside four smooth stone two stone Two smooth stone four stone three polish on the side and then three stone and then we’re going to take our sound tara constantly and go all the way across same as before to there and again to uh to there as well and then now we’re going to take our let’s see We need a lot of slabs a lot of stairs and that’s always joyous i guess let’s start with uh i think we need to go to uh one second hang on right so grab your stone we’re gonna do two there and two here and then now we’re going to Take our stairs that’s what we needed that’s there’s a stone and a side and polished underside i’m gonna do uh it’s hard to work it out hang on i think it’s polished on the side one two and three there and then a stone one here uh three stone two Undecided ones um and then three polished underside and then one stone also do one stone stair there i think that’s the only stair on this layer that’s like not part of that i don’t know why i put it there and it unnecessarily complicates things but hey that’s that’s something i do So so yeah you can do if you want probably would recommend it to be honest two and three and then one it was there i think wasn’t it and then there i think i missed the block off that other side actually yeah it was that stone slab yeah well it’s fine So yeah you got that now which is good um i’m going to take your smooth stone slab i’m going to go to this stone stair here the one that’s in line with that entire section i’m gonna do uh how many is that one two three Four five i think it’s nine so one two three four five six seven eight nine for this layer i think i’m gonna have to just do one side because i genuinely could not do both on camera and so sorry about that but that’s beautiful uh also take your polish on the side Slabs by the way and i’m gonna do a row across there that’s something simple you can just get out of the way three uh stone slabs are gonna go here and then bring these all the way back to basically that layer and join them up So it was nine wasn’t it i think one two three four five six seven eight yeah nine there we go knock that one out so yeah on the left hand side it should be one less it should be eight which looks two three four five yeah looks right to me do two Stone slabs there and then we’re gonna skip two and do another two there like so two here a diagonal to that and then go down one two three four five making it uh six in total can’t speak suddenly one two three four in total to make five there should Be left with one gap at the end and then two there like that should get this shape overall grab the polished andesite slabs now i’m going to do uh i can’t even get on it there we go three and then two there like that and also two here at diagonal to give You this shape now you’re going to take your andesite ones we’ll get those out of the way and i’m going to do one two three four five two here two here also one there in that corner of the little l shape with the polish underside and then also three here I think that’s all of them i think i might stop using andesite when i use stone at the same time because it does make it really hard to see the difference between the two just makes it unnecessarily hard do uh one two three four stone bricks there uh Two one and one these are slabs by the way of course and then stone is gonna be the rest so that’s uh that’s a simple part there we go remember this is all top half slabs and so yeah you should end up with this so far Now we’re going to do the the back section first and then move on to the uh the front i hope i’m not going to go over the end of the boundary that’d be uh that’d be weird yeah take your stone slabs and we’re going to do three here and then take your Smooth stem ones and just take these uh i think it’s one two three four i’m trying to count it i think it’s nine again until all but i can’t be sure or is it ten one two three four five six i think it’s ten yeah so one two three Four five six seven eight nine ten yeah i guess you get a uh full gap between this and the uh the main body do a stone slab on the end of it and then in this gap here is just going to be uh top half stone slabs as well Uh we will change this now though there is one little bit that says slightly different i’m gonna do three to make that a full block and then also three smooth stone slabs here to make that full block and it’s just to help with something with one of the engines here that’s the Reason it’s there so you should get that so far and then we’re going to take our smooth stone again three here and then take the stone bricks and you’re gonna do one two three four one two three stone block but not blocks or slab one two and Three and then that’s fine so that’s the back section done for that layer and moving towards the front now this is where it gets uh super duper fun of course uh we’re gonna start with i suppose here we’ll do the full blocks would make that a Hell of a lot easier uh i’ll say heck no mine sorry heck of a lot easier one two and then just do three four five and then of course you’ll need to uh cover this up in a minute as well um but we’ll get to that shortly so you got five there And then go diagonal do three three three keep going with the threes basically i’m gonna do this all the way to the front and when you get to there just uh leave it there for now and that’s that’s fine and then also on the inside we’re gonna do four three Three three three keep going three and three there and then for these gaps here i’d recommend using a different block so maybe uh maybe cyan what are you saying terracotta i don’t think i even filled this in on my other model these are these trap doors I’ll have to look in a second and once i’ve finished this section yeah let me have a look at that i want to see if i filled it out or not because i’ve not got it on my reference model um no yeah you literally can see straight inside the build that’s always fantastic Glad i noticed oh well it’s fine but yeah we got to hear so far and obviously we’ve done a fair amount of polished underside and next up take polish unsight slabs i’m going to do three of those and three here just do three all the way across again basically but with the Polished underside ones till we get to there okay so take the uh smooth stone slabs now and we’re gonna do two this is on uh one indent of the obviously bit we’re working on then we’re gonna do uh it looks like it ah it’s not even a Really good pattern uh so it’s like two two and two so four twos then a one and then a two again and and then just more twos i guess two two these are all top half smooth stone slabs by the way all right so you’ve got four twos one one two three Four and then on this fourth one that we just did of the the twos um you also need to do three there okay and then another diagonal with two and then we’re gonna do two next to it three four diagonal three interesting um two two and then Two again we’ll just keep going we’ve gone past that but it’s fine got lots to do so we’ve done the three two two two that’s four sets of two and we need another another four actually one two three oh my god we’re so close to the boundary wow that’s very very close Then just do one more here and then we should be left with a single gap in the middle um of the build hopefully that’s all uh all right do red nether brick slabs one two three and then do a three by four like that and then again with the Red nether bricks it’s gonna be one two three four one two three four one two three four and that perfect i’m glad that lined up because if it didn’t i would have cried but yeah great that’s good i remember why it’s such an odd number now Here it’s because part of the build is sort of indented but because it’s such a small scale and kind of had to just change the measurements of these outside lines it looks way different on the on the big model you’ll see that when it eventually comes out Now we’ve got to fill this in there’s a lot of stuff to do here the first thing i’d recommend is going to the third set of two which is this one and then doing a line all the way across joining up to the uh to main body and then on this First line that we did is the as part of the back section go to the third one down and do a line across joining those two up do another one just here on its own and then we’re going to go to uh this one here that we did where we Joined the body before and go to the second one down and add five more to make it six in total and then on that sixth one go down by three to make four and then i’m going to take polish underside slabs and just join that across We’ll do that now to get out of the way take smooth stone slab again and we’re going to go to the so where we did the three there’s a two and then the second two along is this one i’m going to take our stone slabs and do one and two and then four Like that to make five in total we’re going to do a stone slab just here and then i am i’m lost hang on i don’t know it’s fine it’s fine keep going i might have to jump cut to do this front bit just because i I don’t have a good angle a bit on my model but once we’ve done this i’ll decide uh take your stone bricks slabs now go to here and do four and then also here and do three and then you’re gonna do another uh three just there and another three Just there take the polish on the side slabs two and two to make a two by two obviously and and also two here two there to join those up and then apart from that i think that’s everything for the uh those bits the only thing we need to Do now is just fill it all in with stone and there’s no normal underside on this bit and i think i made a wise choice not to do that there’s also a lack of stairs on the underside i will notice now no not notice i will note this now Is that these lines here aren’t the smoothest they can be like smoothed out with stairs and but again i really didn’t want to over complicate it and you barely see the underside anyway and but you cannot add those if you want if you want to be like super duper detailed That’s what the one-to-one model’s for so uh come back to here and do polish underside times eight and as usual i’ll do it on both sides for the sake of it there we go and i’m gonna take our stone block again and do one two three four five six seven eight And we’re gonna take our smooth stone slabs here one two three four skip two do two there this is gonna be stone here this is gonna be two stone two polished two stone i think i’m about to do it actually should be uh should be fine this is gonna be Um trying to work it out so it should be another three um slabs there and then another three and another three would be polished underside yeah good okay and then another three polished underside and then three there and then i think that’s as far as it Goes up to then the rest is just filling in with uh with stone so two three two there we go yay we’ve done that one that’s probably the hardest one of the build and so at least we’ve got through that obviously we need to get on the other side there So thankfully i do have time stamps in the video if they’re not uh here at launch they will be added shortly after so don’t worry about that um i just remembered actually i forgot to do it with the with the nebula i think so yeah but they will be added And i’ll make sure that you can uh instantly jump back to the start of this um another thing you could do which i never actually thought about is to literally like visually mirror the video so that it looks like i’m doing it all you know in reverse Or on the opposite side that way it might be easy for you to mirror things over i literally only just thought about that recently but it is a pretty decent idea and but yeah anyway mirror that over for me and then we will move on to the next layer which is going To be i think the sandwich layer actually the uh kind of filling in the center which is lovely so let’s get on to that right so this next layer is essentially our kind of sandwich layer in between where all the detail is we’re gonna need these materials mainly cyan terracotta stone Polished under site smooth stone stone stair stone brick stairs smooth stem slab stone brick wall and side wall we’re gonna go to the back and this is all gonna be using stone for this bit but it’s gonna be one two three four stone there like so And then do five six seven eight and then on the last four do uh underside walls again like so then take your stone again we’re gonna do one two three four and five by three and then two unsight walls on the last two then i’m going to take our polished Underside and do one two three four and four there as well two underside walls on the side of that and with the polished underside again it’s going to be three three again then take the stone block do one at the end of the undersides and then join those up And you can just fill all this area in with stone most of it doesn’t get seen anyway so that’s why i don’t use a variety of materials here there we go so this is where we’re at so far with it uh take your underside walls again now we’re gonna do two here And two on that side as well then with the stone block just do two there two there and then again fill the rest of this in like that so it should be here so far take the cyan terracotta now i’m going to bring this all the way from there to Just leave it around like there ish for now i’m going to go back to this left hand side so yeah for this one again i will probably only do one side and it will be copied over and i’ll see if i can mirror it but On on screen but chances are i will have to just do it off camera just because there’s so much to do so yeah take the stone stairs do one there and a corner one and then skip one do the same thing but in reverse like that And then take the smooth stone and do one two three four five with a stone brick in the middle do a stone that’s a wall by the way and then stone brick wall there stone brick wall here and also stem brick wall there as well and it’s going to be a Bottom half smooth stem slab just in that gap take a stone brick stair upside down there upside down there then a stone brick wall and then do the exact same thing again so just like that uh oh actually no i think it’s one further so if you just delete that leave Another gap of one do one there and one there and then we’re gonna take a iron bar and that’s going to go in that gap so just there like so and it’s going to be a stone brick wall and then another uh polished andesite just there like so do one more same Terracotta just there and then we’re also going to need uh skeleton skulls although i may i may come back to that and use them later and just do them all at once so if you just skip that block there for now do a stone brick wall And then a stone slab this is normal’s throw that’s gonna go there and then stone stairs one here and one facing the other way do a smooth stone uh slab there and there and then take the same terracotta and we’re gonna bring this all the way To uh to there like so might need to be one more in a minute but we’ll do that we’ll do it after and then do a top half smooth stone slab there like that and the sight wall stone smooth stone and then this is gonna be a skull but again we’re gonna Come back to that then a stone block here stem brick wall and just do another sand terracotta there now what we’re going to do here is just a load of slopes towards the front and i’ll count them out again same as before it’s going to be two two uh two And two so that’s four sets of two and then one set of one like that and two two two and two again that should be four so far and then we’re just gonna do another set of two more to make six in total one two three four five six And it’s three all right and then it’s gonna be one two three four five six seven sets of two one two three four five six seven and then just a single cyan there stone in the middle and then obviously we’d carry on around that side do the exact same thing Now take the stone brick wall uh here and then a andesite one in front of it and then you’re gonna take your polished and site and just do one two three four five six seven like that and there we go that’s fine from there uh let’s do some of the outside detail Uh the first thing we need to do is put in basically these like bluish green windows that are on the acclimator so if you grab your prismarine bricks is what i used and dark prisma you know as well and the there’s only like a couple of these the one is here that’s Two prismarine bricks and then here um this gets covered up actually so that seems pointless unless these are yeah change these to a stone stairs and then a just do a smooth stain slab like that i suppose that that could work i’m going to do a prismarine bricks there and then a dark Prismarine and then the other two are here that’s going to be two more prismarine bricks like that okay so you should have this so far now let’s start adding some detail on the outside of these uh kind of science section so we’ll start with i suppose Stone brick stairs is one that i can see is used quite a fair bit so let’s grab that straight away and we’re going to do one here and one here these are all facing towards the front the next one is just there so that’s on the one before the uh Singular block of saiyan the next one is going to be the first set of two after the single block of sand there we go and then there’s another one uh i think it’s there actually yeah so it should be on the third set of cyan after this single one so one two three And it’s it’s there as you can see and then there’s another one on the next one across and then the next one is in the middle of the three that are on the ring and then there’s another one on the second set of two after the three and that’s gonna be There and then again one there and then there’s just one here like that in the middle of the andesite i suppose is where you could say is or is it no i think it might be on the next one yeah it looks like it’s in the next one there we go That’s fine um i think is that all of them one two no yeah i think that’s all of them okay yeah that’s all the stairs that’s fine um and then we got a load of uh stone slabs now these are smooth stone mostly i think Uh the first one i can see on there is on the third set of two from the start this is here and then there’s also one on the fourth cell this may be a uh i can kind of make it random i suppose it doesn’t really matter That much and i’m going to take smooth stone full blocks and do a full block here um and then we’ll do a full block on this one that’s right next to the single one on its own of the cyan i’m using those as kind of reference points basically And then smooth stone slab there uh i guess just do a slab here and here and we’ll do smooth down there and there i’m kind of doing it a bit more random now it was kind of pointless trying to do it exactly and then we’ll do a slab let’s say say slab there And we’ll do another one here and now throw throw those two away for now grab let’s do the skeleton schools get out the way so i don’t forget them so there was one on the back here like that and then also another one there i’m going to do more skulls we’ll do one Here and also here on the front of the stone brick stairs like that and then we’ll take anvils they’ll get some anvils in there as usual uh on any ship of this size there we go so put an anvil out there there let’s say here maybe here and here another one there And there and what other blocks have we got so we’ve got underside walls in there we’ll do one here one here there there there and here and take iron bars that’s one of the last ones i’m just doing these again in a sort of random-ish pattern There we go so yeah i mean that’s basically it for that bit uh oh there’s one more thing just a stone brick wall just there on the front of that stone and i did put some skeleton skulls in these gaps here but yeah i think apart from that that’s Pretty much it for this layer so let’s move on to the next one so yeah on to that all right next layer up should be layer eight i think i’m gonna get a similar set of materials um i have not bothered to fill the entire hot bar because Honestly there’s just so many that it really wouldn’t make a difference we’re gonna start off with our stone and do two here on the back and then the polish underside one two three four five six take the stone bricks this time with the walls and we’re just gonna do four of those On top of the ones we did before oh actually i think two of those are undecided sorry those are back to them that’s that’s all right then take the polish on site again one two three four five and five again and then these two walls are one stone Brick there and one on the side again same thing all right next up is going to be polished and side here and here with a set of believe that’s four stone one two three four one two three four and then it’s going to be then uh two polished underside here two here And then oops one two one two these are with the normal stone blocks and one of them overlaps onto that polished ant site then you’re gonna take your smooth stone full block to here and two here and then just take a uh temporary block it’s gonna be lime wool And we’re gonna do uh seven there like so in the middle you’ll uh see what i’m doing with that in a minute but as long as you’ve got seven between those two then you know you’ve done everything right so far which is which is good i suppose uh a relief I’m gonna be two normal underside walls on either side there as well and then we’re going to do one and site here and oh i can barely even see what it is i think it’s another andesite wall and then take a stone brick stair one there like that And then one facing away from it and then a stone brick wall here stone brick stair facing towards that side there’s going to be a stone brick wall stem bricks there facing towards that side and then one facing that way like so now these are upside down by the way so far Gonna be another stain brick wall here it’s gonna be polished underside um one second trying to see how this all lines up we will need to put an iron bar there in a minute as well yeah we’ll do that ah we’ll do it now oh i’m gonna forget Yeah iron bar goes there like so and also one just there that one should join up with that wall as well this one doesn’t yet i think it joins up in the in the next layer or something like that or maybe it doesn’t join up at all who Knows uh so we’ve got to hear stem brick wall iron bars there i’m going to take our sand terracotta again and this is going to go all the way across just to here so far do a stone brick wall there again and that was origin in the Background and if you heard that that was a quite loud on my end actually uh grab a skeleton school one’s gonna go there and that’s it for the sculling school for this layer also all this light doesn’t go up any further than that so all this detail doesn’t Matter on this layer so that’s all good and the cyan actually stops at this point on this layer as well which is uh interesting because now what we’re going to do is take a full stone brick because this is where we start to slope back inwards which is good So steam brick there stone block stone block on that side smooth stone four stone one smooth stone three stone bricks and one smooth stone bring this one two three four and then you’re gonna take a smooth stone slab now and we’re gonna do one two and three and all being well should Line up with the one down here which is uh exactly what happened so that’s good and this uh smooth stone slab is gonna go all the way across back to the start here and then two and three and then one two three smooth stone blocks okay take polished andesite stair And it’s gonna be two skip one one two three four and then three smooth stone there and there and then take the polished underside one two go across to the other smooth stone and then join that up there oops do two stem bricks two stone in that gap And then one two three four stone in that gap and then this is gonna be three stone one there two stone bricks do a smooth stone slab there and there so basically a gap of one on either side and then we’re gonna also need stone uh smooth stone No not smoothness sorry anderson and polish on the side we’re gonna take the underside one these are gonna go all the way across here all the way to the other end this is gonna be stone stone there skip one stone stone stone and then one there and then Three underside slabs in the middle okay now that’s uh sadly the easy bit first of all before we continue just grab your prismarine bricks and also the uh dark prismarine again and we’re just going to do one dark prismarine there and then skip is it one or two Let’s check we’re in the right place uh i guess go from this end count three cyan then do two dark prismarine and prismarine bricks there okay again for this layer i’m gonna do one half and then copy over um but then after this one it may Maybe easy enough to um or maybe the one after that but yeah after this point really it gets a lot easier so that’s all right um take your stone block now and we’re gonna do a diagonal and do one uh two three four five six and then grab these stone stairs again And we’re just gonna do one here and then a polished underside stairs next to that like so take the polished underside slab and do one two three and also go to uh let’s see go to this one we’ve got to do like the red stripes as well which is going to be A pain uh so grab red nether break block red another brick uh is it stairs is it slabs i can’t even tell uh i could always come back to i suppose might be the easiest option hmm okay yeah we’ll we’ll come back to i’m just gonna take a quick jump cut and just Adjust my view model because it’ll make it a whole lot easier so back in one second right so i’ve uh just adjusted my view model so i can actually see what’s going on here also we’re adjusting the materials we have so i’ve got red nether bricks red netherworks stairs and slab Another lock stone and stairs and then smooth stone slab polish on the side slab and then the stone slab as well so taking your red another brick slabs we’re gonna go to the where the full block and the slab join here gonna be two three four five six And then take the smooth stone slabs two there too there and also two here as well take the stone stairs now do two it’s gonna be polished next to that then a stone one then a polish then a stone and then a smooth stem one in this gap here we’re gonna do Red now the brakes one two and three and then one in the middle another water block there and there with two red nether bricks stairs there’s gonna be one two three four five six red another brick slabs now throw oh no you actually still need them that was my fault Okay get those back real quick i need them one more time before we uh continue so we’ve got the the line of stone here that’s fine on the third one along should be adjacent to this red nether brakes do it another one one two three and then a uh another wart block there Red another bricks and two there as well then do a stone block here and then now we can throw those away we do need them again at the front but i can grab the uh the materials from over there so it’s fine uh grab the polished and site now need full block There we go and that’s gonna be one and two uh make it three actually sorry there we go get the full smooth stone block go to this end polish down site three there and then two back and then with the stone block one two and three and then one on the edge there Like so do two stone here two stone stairs and then take the polish on the side slab one two one two three stone stone smooth stone smooth stone and then from there this will go to here do three stone slabs one two three take the smooth stone slabs one and two One two three stone slabs one two smooth stone there polish down the side one two and then we’re gonna do a stair there in a minute um in this kind of gap here where we’ve got obviously these indents there is gonna be a big red logo For the republic symbol um but we will probably do that afterwards um well not after this layer but once we’ve done the rest of this uh layer across um and then take the smooth stain slab again i suppose we’ll go to just trying to work out where i am hang On uh take the stone one first two there and then two to the side smooth stone there and smooth stem there now take a stone stair you’re gonna put that here and then a polish on the side stairs gonna go next to that and then do two stone there Take the polished and site blocks again and we’re gonna do one two and three so back by one extra also add another stone block there it should have this so far okay take the smooth stone slabs two there like that and then polish down the side slab one Stone block here another polygon side slab two smooth stone blocks two stone blocks one polished on the side behind that get the uh where are we now stone slab one two and three with a smooth stone slab there uh stone block polished polish there and then one two Three stone with one on the back like that three polish here stone slab there and then this is going to be a polished and sight block just like that okay next up two smooth stone slabs stone slab there stone slab there and then this is gonna be two stone stairs Two stone two polish underside one polished underside here one stone two polished underside there um i think yeah that’s fine and then one behind it take your i think that’s a stair yeah stone stair one and two and then stone slabs two and then two smooth stain slabs Uh come into here two polished underside two smooth stone and then this one is going to be two stone stairs two stone slabs and two smooth stone slabs take the polished and side you’re gonna do two here behind that stone stair and then smooth stone full block one and two Stone block there that’s the origin again i’m gonna have to uh task manager close it after this layer because uh the app isn’t even open that’s annoying yeah just do that with the young site and the uh smooth stone stone there smooth stone and then it’s going to be two stone stairs there And two stone slabs right now for these bits yeah we’re still not done two smooth stone uh two again there and two again here this is going to be a set of two stone stairs this one is i assume probably slabs yeah stone slab and then a polished underside one Right now we’re pretty much at the front so that’s good two stone blocks two stone stairs and then take the cyan terracotta and we’re going to do uh three like that and then just put a uh polished underside i think it’s a stair could be wrong but it Really doesn’t matter stare there like that it’s either a stair or a slab so close enough either way so you’ve got that now and then finally just take another warp block and you’re gonna do one two and three and also one just there like that okay now finally for the Logo here we’re going to take stone uh no not actually it’s just bricks normal good old bricks three there like that one here one here and also one there as well then take stripped birch log or you can use wood actually might work a little bit there one Two three four five one two three one two three there you go that’s uh most of your republic logo it goes on to the next layer a little bit so yeah we’ll uh do that in a second but yeah apart from that that is uh Gonna be it now just to make sure we’ve done everything all right if you get your line wall and do one two three four five six seven eight nine ten eleven 12 16 i think 17 18 28 1 22 23 24 yeah that’s why i worked hours of 24 Should be left with a gap on the end there uh i don’t know how many is until nothing well including the gaps but with these ones on their own it’s 24. oh yeah and then that’s how you know it’s right and yeah let’s move on to the next layer Uh so copy that over and we’ll get on to that all right i’ve kept the same materials but added stone brick slabs we’re gonna go to the back here and instead of working right on the back two blocks we’re gonna skip that and do two stone brick slabs And then two saying terracotta then grab yourself a banner really quick oh so and then it disappeared that’s a shame and where is it where is it so yeah grab like great banners and do two on the outside and again two on the outside grab the cyan back Take polished and site two of those and then three stone uh two underside at either side three stone again three stone again then do one to the side of it on the third block and site stone and site and the site stone like that and then two smooth stone here two Smooth stone here on top of the ones we did before and then just for the heck of it you can do a row of cyan across uh delete the one from the previous layer the um the temporary block one again you don’t need these blocks i just i don’t know it Feels more satisfying doing it this way i suppose and then cyan there skip one one two three um i don’t know if i’m gonna do the other half on this layer i might i might do it i’m not going to guarantee anything i might do and speed it up And but we’ll we will see there’s a lot of stairs still which which uh the main reason it makes it way more difficult take the prismarine bricks and the one in that gap i’m going to do a stone brick stair just there like so and then two stone brick slabs and Next to it and then also a iron bar one and two and then also a stem brick stairs facing that way like that take your stone blocks one there and then make it two and three this time and then it’s going to be stone here and then grab a stone brick full block One and two stone brick there two stone two stone brick there one stone here polish down the side one two three four and then take your smooth stone slab one and two and then diagonal there’s going to be one there two stone slabs one smooth stone slab Stain slab one two three four smooth stain slab there should line up with that one and that one should line up with that one so that’s good that works at least three stained slabs smooth down slab there and again should line up with that one make it three slabs in total Then also grab the smooth stem full block two three four now one two three four yeah there you go that’s better queen two here it’s gonna be two stone uh stone brick block one two three four two stone there four polish underside and then we’re gonna take our stone stairs do a One facing that way and two sideways ones and then i didn’t cancel origin off one two three four five six stairs one two corner that one two with the stone bricks one uh two with a stone two stone bricks two stone and then four stone in the middle For this gap here we’re going to take our slabs stone two three four five six and the side one two three four five six and seven join that up stone in the gaps one two three one two three with the stone and then that’s going to be it for That back section which is good just a few walls to add here and then we’ll be uh i won’t say all done with this back bit but you know close enough it’s starting to taper in there which is good also grab the light grey banners again Just one more time you’re gonna put it just there and also here uh the reason for that is is unknown currently but we’ll figure it out at some point i think it was just to add some more detail three stem brick ones uh two and side ones there and also two on the Side ones there as well yeah that’s great fantastic now moving forward with this bit again we’ve got a bit more slope work to do which is uh always lovely we love doing slight work grab the red nether bricks labs gonna be two uh there two there and two there And then take uh stone slabs one two three four five six now keep your red another brick ones do two there also two in front of it two behind it to make six in total and then do one two three four we’re gonna take our red nether brick full block That’s not that okay that’s this one two there and then with the stairs two there okay take polished underside stairs now three backwards ones facing outwards and then stone block one two three and then a stone stair facing that way okay do stone one two three polished on the side one two One two three four five three stone blocks here uh it looks like it’s gonna be a case of just popping over off screen i’m afraid sadly yeah it’s taking there a fair while two polish underside slabs there and the stair there as well take your smooth stone full block one two This is a polish this is a normal and then it’s a two by two with the stone slabs here we do a single stone slab just there next to the stair and then stone one and then go back by one and then take these stone bricks you can do one here Two there polished and sight full block two more stone stone block polished two stone and then coming back to the front side of that so you’ve got your stone blocks there fine too polished on the side and two there to the side and it’s going to be a polished underside stair Stone stair polished on site block and then a diagonal polished on-site block and then a diagonal polish on site slab then at a diagonal again it’s going to be a iron trap door and then finally another diagonal it’s going to be a light gray carpet So you can see you’ve got that kind of like like raised section which is just good that’s how it’s uh how it’s supposed to be take the stone slab two here and then two forward two forward two forward and one there and then with the brick slabs now Just normal brick one one two three there you go that’s your republic logo that’s very slightly slanted upwards which is nice looks pretty pretty good take these stone slabs again you’re gonna do a cross shape like that and then do another one here and then we’re gonna take our red nether bricks Slab one there and then oh this is a large amount of steam slabs i can’t even calculate this i’m gonna say seven sets of two one two three four five one two three four five six and seven plus one there one to the side do another one there as well with two Stone stairs and it’s gonna be four red nether brick stairs okay there’s a lot of uh red on this layer by the way so yeah get ready for that it’s all uh red another brick uh and near the wall block and then obviously slabs and stairs and stuff So grab the grab the red nether brick stairs slab and then the red well another water blocks are uh go to the stone bricks here i’m gonna do one two with the red nether brick one nether wall one right near the brakes two warts two bricks three warts and that joins up With that fine this next one is going to be three warts two red nether bricks two warts one red another brick one wart one red nether brick two warts two red another brick one wart two red another brick one wart and then one red another brick and then one two three and Four slabs like that okay all be well that should join up with the one on the previous layer hopefully go to this another war here so that’s on the little weird worm shape that’s going to go across to the middle uh and obviously by extension to the other side but And that’s on you do a two by two across from that and then one and two here and then take the red down the bricks one two three four sugar this so far one here red another war block i don’t know why i’m calling it red nether war because it’s not and one Two three that joins up in the middle two red nether bricks and then you know keep going with this that’s another another warp block here red nether bricks one there as well then another wall one two three and this goes all the way uh i think it’s Five or six in total uh one two it’s five maybe um can’t work it out yeah i think it is so yeah do five in total there for the red nether warts i’m still calling it red down the walls it’s just netherwars okay so yeah ignore me three slabs Um and then it’s gonna be a redneck of the bricks there another slab a nether wall another slab and then this is going to be stone uh stairs only one there and then corner one and also just a stone slab uh on that block there there we go Okay so uh once you have done that i think oh one more thing i don’t know if this is necessary but i’ll joining this up on my model so just a you can do two red another brick it’s fine and yeah that is gonna be it for that layer so let’s move On to the next one copy that over and uh you know it’s gonna be fairly easy from now on i hope so yeah all right so all being well you should have this so far and if you do then that’s absolutely fantastic let’s go to the back and ignoring these two cyan terracottas We’re going to do three stone brick slabs two stone and then to the side two polished underside and there and then one in the middle to join up three stone blocks here three here and a side on either side stone on either side polished underside one two three four like that Now go to this one do a smooth stone and then two more polished underside next to it and then three stone blocks here three here and then a diagonal to that we’re going to take our cyan one two three four one two three four i’m gonna try and do the entire layer on This one because uh it does get a lot a lot simpler so yeah grab the stone slabs now i’m gonna do top half ones one two and three and one two and three then the bottom half one is going to go here bottom half one there and then stone Brick stair facing towards the front on either side throw that away and grab the underside walls and we can do two there two here and then take stem brick ones those are gonna go there same again two here two here take the light gray banners and we’re going to do these Just before or after i guess the polished underside there we are that’s the tail pretty much done for this layer as well which is good take the stone stairs now i’m gonna do one two and three of those and then smooth stone slab one there also stone slab two here and with the Polished underside slab we’re gonna do eight in a row so one two three four five six seven eight and again this should sort of like box this section in which is good do another polish underside slab there and another one here and then take these stone stairs These are going to go all the way across and between those two and i’m gonna take our stone block and bring this all the way up to there like that i’m gonna do one again on this side real quick like that and this was the two polished underside there and two there And it was just on this outside one wasn’t it oh yeah it’s all going smoothly now which is good we like to see that two and three wasn’t it yeah two three and then that was smooshed in was it yeah we’re now in the sort of final run of this build which is Which is good so we’ve got to hear obviously where the polished underside ends it’s going to be two more stone slabs and then a smooth thing one do two stone stairs and then a polished underside stair find one here we go i like that two three of these stone to bring that Up to the same level do another stone here then a corner stair and then a stair facing inwards stone slab smooth stone slab here full block of stone um literally already lost where i am now okay now that’s fine two um stone slabs just there and then a stone stair And a smooth stem slab do two polished unsight slabs here one stone one polished and one stone on the end another stone one inwards polished goes there a smooth stone here stair there and a stone block here and then diagonal to that stone block stair here And then finally just do a smooth stone slab there like that okay i’m gonna quickly uh copy this over i might speed it up actually just so we can get to sort of like an even even playing field so let’s uh speed this up and i’ll i’ll do that All right there we go that’s uh that’s fine that’s copied over i think all of it um so let’s go back down to this front section now i’m gonna go to the stairs we placed before so these ones here and just do a row of stone across Replace the middle one with the red another bricks let’s make another bricks in front two nether warts on either side now uh we’re gonna take our nether wall again five two here two here and then also uh one just there red another bricks one two three four five Two red another bricks here two here another wart and then a red nether bricks then red nether walls one two and three and then also three go here and we’ll just corner that around do the exact same thing there like that i hate the sound of another wall block it sounds so Mushy and disgusting i don’t like it one two three another brick stairs and then the rest is gonna be at slabs that’s going to go all the way to there like that and then do a full block like so there we go and then for the final bit Which is here at the front it’s just going to be near the brick slabs one two three four five i think it’s six and then again one two three four five six and for this front one one two three four five six seven and again seven okay i’m just gonna double uh double Check on my model it’s just really hot wait no no wait i put markings here so i can figure out yeah i think it is six one two three four five yes six and then one two three four five yeah yeah yeah that’s right fine okay i was doubting myself but turns out That is right um and then finally we just fill this middle section in with the nether brick slab i doubled one up there but that’s fine and yeah there we go that’s uh going to be it for that later i think so let’s move on to just double checking something Yeah no that’s fine all right on to the next one all right so for this one i figured let’s get the red bit out of the way so that we don’t have to use those materials i’m gonna do four slabs there four there and take the redness of the wart block And three with stairs on either side and then we’re gonna do a uh it’s gonna be kind of hard actually do a gap of one right now the bricks one two and three and also three for another brick stairs like that leaving a little indent like so take the stone brick stairs now Where are they there we go that’s going to be over here stone brick stairs and then let’s throw these away i don’t think we did on both sides didn’t i yeah that’s fine stone brick stairs on either side and then you’re going to take stone brick block It’s going to go there i need to reorganize this stone and polished underside as well stone brick there stone brick there and then i’m going to take a polished underside stairs one here stone one here uh two stone one here and two stone again i’m going to take a stone stair put that There polished undersights there skip one stone stairs skip one two stone two polished underside skip two and make it three actually and then it’s gonna be a stone stair skip one polished undersides there i’m hoping that’s right because if i miss the one i’m gonna be annoyed oh yeah um I mean that should be should be right i think um again i’m going to do this because i just want to double check before i carry on any further so that should be oh so that’s an upside down there all right that makes more sense all right so this uh where were we Yeah so these are upside down stairs here um one two and three and then i’m going to take a cyan put that there and that’s just the one for this layer you don’t need it any more other than that uh dark prismarine two there we’ll do those on the other side while We’re here there we go and then we’re going to take a stone slab one goes there next to the prismarine and then also a stone brick one uh just next to that so there we go take the stone one two one two and then we’re gonna do a diagonal three Take polish downside one two three four one two three four three stone three stone uh two polished underside on the last two of those stones and then with stone rick slabs one two three four five six in total and then just take the ant site walls and you’re gonna do Two there on either side okay now in these gaps that are left uh we’re gonna take underside stairs for some of them one is gonna be there two are gonna be there i don’t know why i said like that i actually know one of them stone so I’m just like their stone here and then there’s one just there as well and there’s also one just this is a slab actually and the site slab there we go just there in the other gaps it’s going to be stone brick walls that’s going to go here and here And then now we’re going to fill in these gaps so it’s just going to be stone all the way across like that and then that’s basically all we have to do is copy that over now i’m going to speed this up just so it saves a little bit of time because we Are uh from what i can see on my um well clips about one hour 40 minutes in so that’s yeah a bit iffy so let’s speed this up all right and then with that that’s going to be it for that later so let’s move on to the Next one exciting all right for this one let’s just keep the same materials it’s fine three smooth stone and then three stone slabs in the middle one two three four five six stone blocks there with light gray banners on this one and this one also add a polished underside here and here And put gray banners on those as well stone in the middle of that and then do three three and three and grab your stem no same terracotta one two three of those and again three of those fantastic take your stone stairs three here and three here and then take the stone brick slabs And do two and two two and two okay polished underside stairs now two of those are gonna be here with a stone one there skip one stone and i guess we’ll grab the normal underside ones as well so normal underside two polished uh two stone skip that one for now two stone Polished smooth stone slab get the stone block i’m going to do one two and three starting from the polished underside and do another smooth stone here stem one here polished unsight stair and then a underside slab is going to be there polished underside stair here and a stone block there And then for the i think the last bit of this red strip is going to be two uh now three nether water blocks and also three stairs like that gonna then take your stone blocks do three and three and then three polish underside stairs facing towards the front Get your stone and i guess we’ll copy this over real quick so one two three um and then it’s going to be polished on the side stairs there one there and a smooth stone slab here smooth stain slab here polish and size there two stone two stone Two polished one and decide one stone and then we can just add this here this here this here this here there’s a uh stone brick walls and it’s stone and two polished inside okay there we go now take the um take the smooth stone i don’t know if most of this gets Covered up this is the annoying thing i guess grab the smooth stone we’ll do it anyway one there one here and then also two there two here polished on side two two and two and two and then the rest is just gonna be stone and the way i did it in the reference Order was starting from there kind of cut that section off and then all this is gonna be stone because it gets basically covered up with um like trap doors and things like that and i just guess it was easier to have a level um surface to work with but yeah Other than that this all just gets filled in which is sweet is we can move on to the next bit which is going to be i think kind of the big flat area where the neck joins to which means we’re nearing the end of the build obviously We’ve still got the engines to go but they really won’t take long and we can do them all in one take pretty much but yeah anyway with that that is uh literally for that layer let’s move on to the next one right so this is a very exciting let’s go to Where these three polished unsight stairs are i’m going to do a stone block here and also there and then two here as well i’m going to take two stone stairs on the front on either side and then take polished unsight stairs i’m gonna do one on the side of it and Then three on the back just like that then because i know this is on the next layer might as well do it now i’m gonna do two iron trap doors on top of those that’s all good take the polish on side stairs again leave a single gap And do two there oops there sorry and also here take polish on the side two two two two and two to make five in total and again well 10 until i guess take your iron trap doors again two here to here let’s say four four again and then take light grey Carpet and you’re gonna do three and three again same thing here and then take a smooth stone slab that’s going to go on this one this middle uh one that’s covered in the light gray carpet then take the stone one two and three and then you’re gonna do another one two three Four five six polished underside and and then a i can’t tell what that is i think it’s a polish unsight slab i’m just going to use that there we go so just like so take the iron trap door again that’s going to go here and here and then you’re going to take a Iron pressure plate something we very rarely use but here we go one there and one there and again on this side like that take a lever that’s going to go there flip it and again then also just a stone button on top of the smooth stone that we did before Like that okay oh actually we need two on these as well there you are take the polish and site slab again one two three four five six seven eight and that joins up with that this goes back just to there and then we’re gonna do a stone stair like that same thing again Uh just like so that goes to there wasn’t it yeah good and then also do two here two here take the smooth stone slab one two and three two more polished underside and then stone slab uh where are you find one one goes in that gap two here two smooth stone here same Again so two stone two polished underside one goes there with a l shape around it and yeah i mean that’s literally it for that bit so let’s move on to the the actual neck and i think we can do the entire cockpit in one section anyway so that’s fine so let’s Move on to that and then we’ll do the engine straight after all right moving on to the bridge of the ship i’m gonna take two polish underside stone one two three four five six seven eight nine ten and then also two here stone slab there stone slab there and that should Kind of taper up perfectly which is good because it does smooth stone one two three four oops one two three four five and these are gonna be stone brick slabs grab those and that’s oh that’s a full block and where are you where are you i’m gonna find you Uh i know i had one somewhere recently yeah i’m gonna have to grab one from the menu down all right one two three four five of those and again five of those i’m going to take stone block and just do it all the way across plus two on the back And then we’re gonna do uh stem rick stairs again i thought i had them before but i guess not i’m gonna have to grab those and put those just there i suppose five on this side i’ve on this side and with the polished underside slabs it’s gonna be four and four Like that i’m gonna take our dark gray carpet or just gray whatever one two three four and five of these and with the polished underside i guess we can do a three by four one two three four do one on the front and then polished underside stairs One and then round it and then two again like that should get this get the stone slab two here two smooth stone and then we’re gonna take a iron trap door one there two here and then just take some light gray carpets i suppose we’ll do those on top One two three four sugar that so far take birch sign now one two and three one two and three and then now we’re gonna go to the underside we’re going to do a smooth stone slab here hang trap door there like that two polished underside a stone stair facing forwards and then a Smooth stone slab on the front uh yeah that should be should be right i’m just double checking there’s nothing actually on the front of that um oh no but it is it is a stone stair instead of a polished underside so i guess i can change that real quick there we go Uh grab andesite walls now i’m gonna do two here and two here and that basically completes the the cockpit the last thing you need to do is just grab some stone brick walls put them here and on this side as well it was there wasn’t it yeah Can’t fall off the build there we go and yeah once you have done that that is gonna finish up the no it’s not wait is there something on the back of that i feel like there might be again i’m gonna double check because i can’t really see it on my Oh reference i guess not okay sure well you know what for the sake of it because i went all the way over there i’m going to add something just to give this very slightly better shape put a um iron trap door under there because it does actually slope up very Slightly um but yeah apart from that that is not everything yeah i threw you uh through you’re in a loop there basically we left the engines remember now we’re gonna do those um and they’re coming back to bite us well yeah it’s not going to take long It’s going to be like a single take and it’s just a separate little section there’s uh i think three engines on each side one tiny little one here one like mini one-ish here and then it should be a fairly large one but it’s again it’s not too difficult it’s just a Circle but yeah let’s uh do that and then the build will be finished so on to that all right so for your first two engines basically the little one here and then the uh seconds kind of small one there we’re gonna do is first get this out of the way and Then we’ll do the the big one afterwards i’m going to go to this block here and just do a single uh chiseled stone brick and then a trapdoor is going to go not there no i’m in the wrong place one second polish blackstone wall then chisel sim bricks And then dark over trap door just surrounding that like so same thing again there we are just like that that’s fine i’m going to leave these temporary blocks while i’m here as well makes it’s a bit easier and then for the second one is going to be Just so if you see where this kind of sticky outfit is going to put a black stone wall there polished two cyan and their chillstone bricks and the side slabs three three and then three walls on either side as well and then same thing again on this side I’m just gonna be there one two chilled three and the side walls three slabs on top and that’s fine so you’ve got those two engines now which is good and now let’s just quickly uh move on to the big ones so i’ll be back in one second right so we’re gonna start the Final engines by taking these materials here and telco smooth stone polish on side stairs and the side wall and side slab we’ll need a couple of others um but i’ll i’ll do this after it keeps it simple this way do polish on the side stairs here and also you’re gonna do one like There basically there we go and then also one there and one there and then one needs to go here and one here and then finally and that last one you can’t really do because that’s in the way and but if you want to delete that i mean it doesn’t really make a difference Actually yeah delete that and do that that’s fine and then the last one needs to basically be uh there there we go take same terracotta now and do one two three four all the way around like that now we’re gonna do three one two three one two three one two three one two Three keep going like that don’t need to do stairs on any of these ones should have four in total now we’re going to do a smooth stone all the way around like that then on the side wall here and here there and there and then slabs on these ones Take your same terracotta again and we’re going to do another one two three four four four and four all the way around just like that now take your stone stairs so if you grab grab these on the third one along do stone stairs around like that There we are and then finally moving to this bit we’re going to grab a polished underside and do one two three four four four and four and then take uh stone blocks and we’re gonna do three three and again three and three you’re then going to take stone brick walls And do one here one here and then four stone brick walls on the outside like that then take stone brick slab one there and then four on top one two three four one there as well grab sea lantern this is gonna be your engine light put that there And then a with a skeleton skull in the center like that now once you have done that that is going to be it for the engine and therefore pretty much the end of the build all we need to do is copy that onto this side which i’m going to do off Camera and but you can you should be able to see a kind of time stamp for how you can redo it so you can just instantly jump back to that but yeah after i uh copy that over i’m going to do a kind of overview of the build And there that’ll be it pretty much i’m very tired after recording this if you can’t tell so let’s copy that over and we will do a quick overview before we finish so on to that all right here we go so here’s the finished product it looks absolutely awesome and you can See the engines look really great all circular and stuff which is like i mean you guys kind of expect that see if we can see the underside of it from down here no not really the shaders are too uh too intense but whatever that’s fine uh obviously not much bridge detail Clone clone 543 is there that’s a nice little cameo appearance and but yeah i mean i hope you enjoyed the video and let me know what you want to see in the next one i’m hoping i’m not forgotten anything and before i end it well yeah No holds on anything in the build as far as i can tell so yeah perfect anyway i will see you all in the next one and have a great day all right goodbye i hope you enjoyed the video massive thanks to all the current patreon supporters who helped make Content such as what you just watched possible please check out the link in the description if you’re interested in supporting the channel there’s awesome rewards on offer for your contributions too so thanks You Video Information
This video, titled ‘Republic Acclamator-class assault ship | Minecraft Star Wars tutorial’, was uploaded by Elcestrus on 2021-02-26 23:08:49. It has garnered 18439 views and 530 likes. The duration of the video is 01:54:47 or 6887 seconds.
Build Scale: 1:10 (Fleet Wars) Build description: The Acclamator-class transgalactic military assault ship, also known as Acclamator-class Republic assault ship, Acclamator-class Planetary Assault Ship, or Acclamator-class battleship, or Acclamator-class cruiser, was a type of cruiser-class proto-Star Destroyer utilized by the Galactic Republic for ferrying clone troopers across the galaxy.
Fancy skipping the long tutorial process, or want exclusive builds before they’re even released? Visit my NEW web store today!: https://elcestrusyt.sellfy.store/
You can find the material lists for builds here: bit.ly/3ufQdLd
You can also find me on: Discord: discord.gg/KSDQGWj Twitter: twitter.com/elcestrus Instagram: elcestrusyt Reddit: reddit.com/user/ElcestrusYT DeviantArt: deviantart.com/elcestrus
The music used in this video is sourced from multiple incredibly talented artists, both independent and from the YouTube audio library. Individual artist sites can be found below: Music by Tobu – tobumusic.com Royalty-free music – Bensound.com Intro music: “Galactic” – Filmstro | Create custom royalty-free music in minutes https://filmstro.com/
Video timestamps: 00:00 Intro 01:34 Section 1: Body – Layer 1 04:27 Section 1: Body – Layer 2 08:20 Section 1: Body – Layer 3 13:24 Section 1: Body – Layer 4 21:08 Section 1: Body – Layer 5 29:14 Section 1: Body – Layer 6 45:26 Section 1: Body – Layer 7 55:46 Section 1: Body – Layer 8 1:11:59 Section 1: Body – Layer 9 1:24:01 Section 1: Body – Layer 10 1:32:07 Section 1: Body – Layer 11 1:37:14 Section 1: Body – Layer 12 1:41:13 Section 1: Body – Layer 13/14 1:44:36 Section 2: Bridge 1:48:51 Section 3: Engines 1 1:50:05 Section 3: Engines 2 1:53:20 Post Build Showcase
