Before we start let me set the scene you’ve just come out of the nether battered and burned from the dangers of the Fortress where you fought for your life against the hordes of Blaze and wither skeletons but you you came out on top with the power of the blaze Themselves ready for you to power yourself deep into the brass age of the create mud however as you explore these new materials and Technologies you’ll likely come across a new type of crafting you haven’t seen before the deployers and this is where I come in not only am I going to be showing you how this type of crafting works I’ve also designed a machine to make one of the more annoying components the Precision mechanism for you already and here it is this design is made to fit against the wall being relatively small in its footprint of only four by Six by seven all you need to do is put your gold sheets in the left barrel and then the corresponding materials in the top three and watch it go now it’s important to note the process needs to be done five times to complete the Precision mechanism otherwise you’ll get an incomplete mechanism So the machine will automatically take the unfinished ones out of the end barrel and cycle them back around to be put through again though you have to beware on the final step it has a 20 chance to turn into random scrap and the crafting will fail and I’ve sort of decided instead of Explaining how this thing works exactly what I’m going to do is I’m just kind of going to bring up some useful tips and tricks about it as I’m doing the tutorial rather than doing it all in kind of one lump bit before because then it’ll kind of come up where it’s Relevant and it’ll be easier to kind of show it in action in and everything in this chest is what you’re going to need to get started with this so pause here collect all these items and then you’ll be ready to go so to start things off we’re going to Start by building the frame of this thing so we’re going to take our dark oak loads and we’re going to go one block here with a barrel on top and then one two three four blocks on top of that five blocks apart and then do the same thing again And then once we’ve done this we’re going to put our stairs in on the bottom and then on the one block from the top like this another log on top of those stairs and then a beam just coming across the top like this and then finally we’re going to have one Plank here one plank here three barrels in the middle and then two stairs underneath those planks and that’s kind of like the basic layout of this thing so next up we’re going to do the belt work out the front and we’re going to take one shaft on either end like this a Belt between those and then just two andesite funnels on either side like this and then on the Belt itself I’m actually going to be using some brass casings I think these look a little bit more Sleek than the undersight casing I really like the gold trim that these things have and Then after that we’re going to take three shoots from these barrels with three deploys now it’s important to note that if you shift and place these in they’ll be placed the wrong way so you just have to right click those on without crouching and they should be facing the right direction We’re going to come back and set up the filters for all of these later on but for now this will do so next up is then the power to these things out the back and we’re going to take three chain drives on the back of these deployers and then on either side Of those we’re going to have a vertical chain drive and like I said in the last video These do connect even though it looks a bit weird they do actually work like this and then underneath we’re going to do five small cogs and one small Cog down there So then the next step once we’ve done this is we’re going to be powering the belt with just two vertical gearboxes like this and then of course we still need to power this whole system so what we’re going to do is going to take a vertical gearbox from this chain drive we’re Going to have a shaft between them and then we’re going to rotate this vertical gearbox to be the other way like this on the bottom and then this line here coming out the back is where you’ll want to connect up your power to so I’m actually going to connect this straight To the other machine I use the creative motor for this one but for your machines you’ll have to hook this up to your boiler or your engine or water wheel or whatever you’re powering this with now you can actually see the way I’ve done this this is actually facing the wrong Way so I’m just going to break out um something here we’ll go with just here we’ll reverse the direction of this so that it is Flowing from left to right it doesn’t really matter if it’s going right to left or whatever as long as you set up the filters to match that it Doesn’t really matter I just prefer my belts to go from left to right so the reason that we’ve actually hooked this up to the power already is because we actually need to use the machine to get our hands on an incomplete mechanism which will be used for the filtering System to cycle them back round to the start so while we’re here I’m just going to place in our placards here this is just going to show us what item goes in what chest so at the start here is obviously our gold sheets then we have Small cogs big cogs and iron nuggets and you just want to throw a handful of those items in each of these and some of the gold sheets in and you can see we’re now at stage 3 of 15. and this here is the incomplete Precision mechanism and we’re going to Keep a hold of this because we’re going to use it to set up the filtering system out the back here so Force head filtering system we’re going to come out the back here and we’re going to place in some Depots so we’re going to have one behind each of These barrels and then one on top of the vertical chain drives like this and then out of the back of this one we’re going to want to take a brass funnel which I don’t have in my inventory there we go and the reason we’re using a brass funnel is because These can be set up with filters now what you need to do is you open this up we’re going to drop that incomplete mechanism in and then we’re going to click allow list on this and this is fine it doesn’t really matter on this stage because you can see the recipe Sequence is more NBT data and the item itself is called an incomplete mechanism no matter what stage it’s at so it will just pull any of them out and you just pop that in the filter slot there and then that will mean you can see our Precision mechanisms incompleted Will be popped out the back like this and then at the top here we’re going to do something a little more simple and we’re just going to add some storage for these things I’m gonna go for a two by two by three Vault here just so there’s Plenty of storage so we can just dump a ton of gold sheets in this thing and it will keep on running and we don’t need to use brass funnels for these because it’s already being filtered here so we’re just going to put a and the site funnel into there holding Shift so it goes in and then right click on that one for outputs and then here you technically you could do a andesite funnel here but the reason I’m gonna put a brass funnel here is because when you craft these things you get them in pairs And I’ve used two there two there so it just kind of makes sense to use two here because then you don’t need to craft an extra pair of anesite funnels because you’d already have this one spare anyway so it just kind of makes sense and it keeps it looking symmetrical I suppose Just kind of a nice little detail there I guess and there’s now only one thing missing from here and that is to get these mechanisms back up to this side which we’re going to do through the help of some mechanical arms so we’re going to Set up the first one here and this is going to take from this Depot place to this one and we’re going to place him in this Gap here and you can see they kind of clip through these blocks but that’s kind of all in the name of keeping it compact you don’t Really get to see these things I guess if you really wanted to you could run these cogs at the back here so you could see the arms but I’m not really too fussed about that so I just kind of kept it like this and then the second side We’re going to take from this one and deposit down there Place him in not on that belt take from there deposit there place there there we go and you can see he’s now being cycled around and hopefully when it’s finished it should not turn to scrap oh one more Nope ah there we go perfect and yeah because of those filters we set up the Precision mechanisms nor any of the scrap that you may get will get pulled out of here so it’s very easy to do a blacklist for precision mechanisms on this filter but then it will also Start pulling out all the scrap which is why we had to turn the machine on to get the incomplete one to set up that filter because you can’t actually search for an incomplete mechanism in jei or anything like this so like I know you could use This but yeah it just uh kind of makes it a little bit more foolproof oh and once you’ve got your hands on this I guess you can uh you can put it in this placard here I didn’t include this in the material list because it felt kind of counter-intuitive to put A Precision mechanism in the material list for precision mechanisms so once you’ve made one you can fill that in and then lastly is a little bit of decoration because you can see having all of this open these the clipping through the blocks it doesn’t really Look that good so what I’m going to do is I’m going to take an anthrazyte casing and I’m just going to click them onto all of those blocks and it’s just going to hide a lot of that Jank back there and I’m also just going to fill in This Gap up here with three of those now the cool thing to note is that when you’re clicking these onto belts like this it doesn’t actually consume the item so the three casings that you gathered to place here you can click them onto here and cover all this up before you place Them there and you don’t have to get any more it’s kind of nice but there you have it a fully functional Precision mechanism machine let’s grab us some gold sheets and we can test this thing out let’s go with half a stack and you can see it’s decently fast as long you’ve just Got to keep it topped up with your cogs here and your iron nuggets but other than that it’s looking pretty good and you know I figured this was kind of going to be a shorter one because it was a much smaller machine but I break dirt Um thank you all very much for watching I hope you found this tutorial helpful if you enjoyed it then make sure to subscribe to the channel and let me know in the comments anything else that you think would be useful also that noise means they’ve just run out of resources Gotta top those up again um but yes see you later guys thanks for watching Video Information
This video, titled ‘Precision Mechanisms TUTORIAL | Create Mod 1.19.2 | #tutorial #minecraft’, was uploaded by Skeej_Inc on 2023-03-12 00:43:51. It has garnered 34346 views and 1145 likes. The duration of the video is 00:10:53 or 653 seconds.
A short tutorial on how to make a automatic precision mechanism machine to help you progress further into the create mod.
Join my discord? 🥺👉👈 https://discord.gg/FEcgY7URRd
———————————————-
Almost in F – Tranquillity by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100394
Artist: http://incompetech.com/