Hello guys and welcome back to teen madness today we’re going to be looking at the sequel to my original unreadable base and this time is going to be an actual unreadable base or a near unreadable base because the original one I did was mostly just to get the basics Out the way so you could have a reasonable idea of what a good base can look like well this one is going to be using a lot more complex walls ones that are much more effective but are quite a bit harder to build and a bit more Expensive but it is well worth it if you want to keep everyone out so that’s the whole purpose of this base and this one is going to be the one that you’re going to be using to be getting rid of everyone and I’ll be doing explaining Later on on all the aspects and how you can get rid of all of it so before you go standing in the comments below I could do this this this is this just hear me out so this is the main base here and let’s get into it So I’ve just stripped away all the water so it’s much easy to see as we know that this water on top and that’s pretty much it as it flows down in every possible corner so there are several aspects of the space we’ve got our major joint vault type thing where your actual base Going to be with some security actually inside it then you’ve got your main outer wall here and then you’ve got several other defences around it and then you’ve got other stuff below it like this giant slab wall so anyway to start off let’s look at this giant Obsidian shell so the actual top and bottom have got free layers they’ve got a layer of obsidian followed by water followed by obsidian followed by waterfall a pipe set in again and that’s just to stop roof roof um roof Buster’s and bottom Buster’s and the only reason For that is because it’s easy to get through one layer I think it’s hot much much much harder to get through two layers and then it’s just about impossible to get free free layers so if you’re free layers of this I’m not actually going to open this up because They’ll just make a mess you’ll be able to pretty much protect against bottom and top Buster’s anyway and most people don’t use that and most people don’t even know how to make them but it’s just there because no doubt if you’re making a base like this you want to get every Basis and no doubt people are going to be raiding you for years to come so that’s the main bit they’re an expert we have here is just simple simple Larry slabs that goes all the way up I use this actually in my Oliver build and the reason for this is Normal tnt cans when they had it there’s a glitch where if the tnt hits it it who actually can bounce off and I wind in much more detail on the other video if you want check it out but it’s much more powerful than just a simple straight Wall and also you don’t use obsidian so that’s really nice for that and in fact it’s free thick because it’s a lot hard to get through it and this makes a really really strong basis for just an extra wall and it saves you having to Make tons and tons and tons of walls on top of it so after that we’ve got our real kick in the aim a real kick in the butt and that is this giant thing here which is my anti sand wall I’ll have a link to the description to all the Different walls and here below and that’s also why I’ve been doing tons of walls the past week and nothing else so there’ll be a link to all those in description below but pretty much what this does is as soon as someone tries to hit you with any type of sand stack or Hybrid cannon anything like that it will catch the sand and it will break it and the they’ll have just a really frustrating time because they realized the most basic cannon that they used doesn’t work and it’s going to frustrate a lot of people and that’s the main Reason for this and then along the edges here we have something that’s called a corner pillar which is a very appropriate name because it’s on the corner even though this can be very useful for the middle – instead of actually having the anti sand walls here this is mostly to stop corner busters And things like that because corner busters they are based on chance chance for a large portion of it because they can fire they fired rioting Lee so they can they leave are hit in the same spot at the one time so anyone that’s used a corner buster would know that so pretty Much all this does is it’s just a normal normal water wall but what can happen is they can get stuck in the middle and it can be harder and harder and it can take a lot longer for them to get fruit and plus it’s four by four so it’s like Trying to get through for individual walls and since it’s random it’s 16 individuals for each side and they probably won’t be going be going for the site anyway because it is all in line with everything else so already we have an extremely tough base but we have one tiny more base This on the bomb so what we have is we’ve got this giant layer slabs here followed by an empty void also if your sponges don’t forget to put that round edge because that saves lag that’s really why people use sponges so the whole reason for this is so if someone Does hits and and they don’t do the hybrid cannon right or something along those lines it’ll just hit the bottom here and it will break and also I would have done tens of thousands of layers but anyone that has used a slab buster they know it can rip through hundreds of slabs at Once anyone that’s washed in my slab buster videos even my mini one it can just destroy slabs and it’s insane so there’s no point having any more than one layer or else it’s just using tons of resources but it’s good to have it all the way through your base as it can just Destroy every sac so that is a very brief explanation of pretty much how the space works if I went over in depth of all this I’d probably be here sitting here for days because it is really complex of how this works but if you do build it be assured that you pay your Base will be protected and you’ll be sorted just going to cost you awful lot of resources and a hell of a lot of time to build it though also one thing to point out for actually do the tutorial this is a 20 by 20 base so you can have It bigger or smaller it doesn’t really matter it is very very easy to adjust these walls to fit the size of your base so anyway enough rambling let’s actually get on off the tutorial so the first thing you want to do before you do anything and I cannot stress this enough Is you want to map out your area area which we’ll be doing in just a second but the resources going to need is some obsidian some cobwebs a ton of slabs also don’t use stone slabs use cobblestone slabs and some building blocks any really kind cobblestone mostly because it’s the Easiest resource to get a ton of water and some lava for the corner pillars so I’ve just built a one block by version of this just to give you an idea of how look if you’re mapping it out and the most important thing to remember is you Want to have a total of 13 blocks in every direction from the very edge of your outside base so it says is the outside of your base you’re going to need 14 total blocks to the edge and effort is not 13 blocks then you will not be able to fit this Entire thing in and it’s not going to have the potential that it would be if you do have larger that can be good because it just means there’s a longer range between without finding the cannon Jen your wall but there isn’t a huge gain from doing so so that is the main Point of this and then it’s been going to be doing is we are going to be adding the water these so I can show you how to build this also one thing they’re going to be done there’ll be a huge amount of cuts because I’m going to be doing Spending probably hours building half the stuff off-camera I’ve already spent quite a while just building all this so anyway yeah so I’ve just built this giant obsidian shell and the reason for this is so I can show off how to make the first layer which what you want to Do is grate your joint obsidian based thing which is the middle shell that you’re going to have which is going to be one last thing I recommend you make it obsidian it can be anything else but obsidian is the hardest material to penetrate so after that you after you’ve Made your bottom floor but you just want to go in a diagonal pattern placing your water along like so it should be very obvious but you just want to create your giant water thing on the bottom so the reason for this is so that if someone does penetrate the bottom we’ll all Start flowing out and it’ll be a million times harder for them to get under it as they have added height as well and secondly if we add another layer which we’re going to do now it’ll be even harder because now they’ll have a specific spot to have to shoot through To penetrate the third layer and they’ll be even more water running through so you can have even more layers in this but I feel like this is the most beneficial layer having a turtle 3 layers or two layers of water it is just the most beneficial and you want to do The same thing on the bottom so you just want to create this layer obsidian followed by now layer water in this layer of city and then on the top you want to have your top layer of water of course and then you want to have obsidian then a null layer of water and Obsidian water and then obsidian so I know this does limit your space a little bit but believe me it’ll be worth it as you will not lose all your stuff so two more tips before we actually continue going on is one you must not place your water on until you’re completely Finished it is a hundred times easier to build it without the water flowing everywhere and second do not bring any resources or any like valuable stuff from your old base or volt or anything to here until it is 100% finished because if someone does try to rate it then they’ll get nothing So just huge thing there so the next bit is very self-explanatory and I explained it earlier and that is this free piece sort of slab piece this is probably one of the easiest pieces to build of the base so all you want to do is you want To go one block out every angle every side of your base and then you want to make a free wide piece of slab all the way around your base and the bottom layer should look something like this and you just want to continue repeating this along the way and also The best Roderick I mean to build scaffolding is to build stairs like just tons and tons of layers and stairs around your thing it’s very easy maneuver it’s the way I used to build faction bases so yeah that’s what I recommend doing so after that you just Want to bring this up to the same height as this and you’ll have a really solid wall after that at this point your base should sump should look something like this if it doesn’t you should probably go back and actually check what’s wrong but now we are going to be working on These actual anti sand walls so these are very important and I know you can you should definitely build them out of cobblestone I’m just going to build them out on because I’ve already started building them out of iron and iron is one of my favorite type of blocks moves Because it’s really easy to count the blocks when you actually have them like this because I’ve got the outline which is just a tiny bit of personal preference so the first thing you want to do is go back to the tutorial made and actually how you build it it has a Really in-depth tutorial on how you actually build us and believe me you’ll be glad that you watched it so the basis of this though is actually pretty simple it’s a checkerboard pattern of both these cobwebs and your actual resource that you’re going building with so what You want to do is go in a chipboard pattern with evie your blocks or your cobwebs and you just want to go around like this he won’t start one end and then you want to go all the way to the other you just want to make sure there’s Seven blocks out and you want to make sure very very important that most outer block is a cobweb I’m pretty sure no one will stuff up on this especially if dusting the tutorial so you just want to keep repeating this I know this will take forever you just Want to keep repeating it till you get it to the same height as this and you should be golden so two things I’ve done since the last card I finished building these wolves and I have made the basis for making the corner pillars which are arguably these Is play bit to make I’ve not been the world’s best prepared to this I should have actually built this earlier and I’ve actually just made this cobblestone walls here to protect the cobwebs from being fried which they shouldn’t be because I’ve just melted out my head and That shouldn’t work so one thing that you should do right now before you continue is check out the tutorial I made on how to make the corner pillars if you haven’t already it is in depth and I’ll show you how to make these really Opie things anyway and it is Essential that you do that or else you will not get it but I’m going to briefly go over it anyway because they sort of have to so what we have here is just a little layout that we normally have and what we’re going to do is going to place Our lower here and then we’re going to wait for it to go all the way down I also apologize if I say lava as lava or something something weird with an R on the end and it’s not my fault it’s my accent I swear so we’re just going to Wait for all this lava to go down and we are going to destroy the middle block of where the lava lava is or else it’s not going to work as I also go and get into the jute or about but the main reason is is because that the lava Updates beside the water so yeah I’m just going to wait till the Slavik gets down the bottom and then I’ll get back to you guys so now the loves gone all the way to the bottom and I just realized there’s going to be some cleanup work to be done on the very Bottom because of the slabs because of what I’ve done but now all you want to do is you want to place water on the rest of the individual blocks like we have here and then it should instantly start creating your cobblestone pillars also one thing I just realized that I Also sit in the tutorial they should have done which is probably going to screw this up is the fact that we cannot have our pillars here without our water so I’m probably just going to add some stuff so it can actual do it here so it can actually fix this By placing water in these slots here but I’m actually going to clean all this up and get it to work properly so I should have been a tad more prepared for this and if you are building this you probably have actually done that and like I said I’ll have to do some cleanup So I’ll show you what it looks like when it’s actually done there are do things I’ve learned so far from doing this one I am a giant flop as I completely screwed up that last section and to this I’ve spent way too much time doing this But anyway we are nearing the end and we have pretty much finished the major parts as you can see us as well look like once you’re actually done if you do it right and you’re not a giant flop like me which 99s in the population should be and I’ve also finished off Making all the Ella bits so this whole base is pretty much done we just have to do one more thing which we have to do make sure we do it right – which may not sound that great but it’s putting all the water on so the first thing we want To do is just what I like to do is just go along the middle place down all your water like we did earlier with our other things so we get our little spread Lake here and you pretty much just want to go along every Ella block if I can make Sure I don’t lag like hell for some reason I don’t know why I’m lagging and you just want to place it on every single block and the most important thing here is after you place it on all your blocks you want to make sure that there are no gaps like this or someone Can corner bust you super easily it’s mostly important on these outer corner things because if there’s this half block here then they don’t have to worry about anything they can just corner bust you super easily it’s really really big problem so you want to make sure you do That you make sure you do it now so I’m going to sort that out right now so I’ve just finished doing all this for quite a while because there are a lot of small space you have to get sorted and I’ve just been forever doing that so now your Base completely finished and you’ll probably spend a lot longer than I did actually make this I’ll spend more than two hours recording this which is quite a long time luckily as the holidays me so that’s great but yeah let’s go take a very long time but I’m sure once you’re Finished you’ll be extremely satisfied if there is so I hope you guys did enjoy this video if you did please hit that like button and I really do appreciate and it helps out the channel and if you want to see more content like this then hit that subscribe button But anyway goodbye from TNT madness Video Information
This video, titled ‘Minecraft: How To Make A Unraidable Faction Base [Advanced Tips, Extreme Defense!] [Tutorial] [1.8]’, was uploaded by TNT MADNESS on 2015-09-30 02:03:51. It has garnered 209981 views and 2638 likes. The duration of the video is 00:16:06 or 966 seconds.
Hope you enjoyed this video. There are many more like on my channel with them coming out twice a week. If you liked it hit that like button and if you want to see more hit that subscribe button.
Schedule (New Zealand Time):
Saturday: TNT Cannon Wednesday: How To Factions / TNT Powered Redstone / Specials / Other (Series, etc).