Brandon Stilley Gaming – Minecraft: How to Build a Mansion 7 | PART 1

Hey guys i’m back with another minecraft tutorial here in this one i’m going to be showing you how to build this mansion it has five bedrooms and four bathrooms if you would rather have an extra bedroom to make it six bedrooms in total they could go ahead and turn the game

Room that i have into a bedroom then the backyard has a large pool a basketball court and a tennis court so let’s go ahead and get right on into building it here’s the plot size for the build if you want everything which includes the house the front and the backyard then

From left to right you’re gonna need 69 blocks from front to back you’re going to need 92. if you want just the house itself and none of the landscaping then once again you’ll need 69 blocks from left to right and then from front to back you’ll need 35. let’s go ahead and

Pay attention to the numbers towards the right so where that 32 is that is the space needed for the front yard so start at that first bottom right hand corner then go up to that second corner from each one of those you should be able to count 32 blocks

Now start at that same corner we use for the 32 and go up to the next corner from each one of those there should be 35 spaces which is the space needed for the house and then the space towards the top that is the backyard so start at that same

Corner for that 35 and then go to that final corner from each one of those you should be able to count 27 blocks so another thing we could pay attention to for the space where the front yard is you can see how we have that 32 remember that is from each corner of

Where that concrete is so in between those two yellow lines you should actually still be able to see 30 blocks of grass and same with the backyard you can see how we have that 27 there from each corner of where the concrete is but actually in between

Those two lines you should still be able to count 25 spaces of grass here in part one i’m going to be bringing up all the exterior walls for the first floor of the house so be sure to grab some andesite diorite pillar quartz blocks deep slate tiles white stained glass

Paints smooth quartz stairs and dark oak fences we’re going to start by placing the foundation for the house first so make sure you have your endocyte i’m going to head on over here towards the front left hand side of the house so go to the shape for the house itself right

Here in the middle we’ll just go here to this corner and we’re gonna work our way back until we’re on the eighth block so we’re gonna include this corner here so this would be one two three four five six seven and eight now i could go towards the right of that within the

Shape and place a block of endocyte right there so we’re just right on the edge of the plot size go towards the right of that place one more now go out pretty much working your way towards the front so we’re not going in towards the back but we’re going out

Right here you can work your way towards the right and place an additional 12. And now go back in and place another three so that is the start of the foundation and real quick just to make sure you should still be able to see five spaces of grass right here at the edge of the endocyte that we brought out by an extra

Block to the edge of the plot size here so you should still see five spaces of grass now head back on over where we left off go towards the right side of the space of three where the indecide is and just bring it out towards the front by another three

So you should then still see three spaces of grass right here now go towards the right of that starting here and just place an additional 34. now right behind that work your way towards the back and place another three and now exactly what we did over there we’re

Then gonna do over here at this right side so the entire build will be symmetrical so just go back where we just left off and place an additional two blocks of andesite right there now go out from the corner of that bring it over by another 12

And now go back in and place another two and you should be right on the edge of the plot size if you did everything correct so we marked out the front side of the house now we’re gonna start working our way towards the sides so now on both the right and the left

Side we’re just going to work it back by an additional 12 starting right here And now i’m just gonna flip around so i’m here at the back side and we’ll start marking out all the walls back here so we’ll head on over here towards this right side when we’re facing from the back we’ll go towards the left and just bring this over by one more

Now go out from the corner of that bring it over by 12 and now go back in and bring it over by another three so that all matches with how the front side is and now we’ll continue on right here towards the left and work this towards the back by another seven

So it’s like this we’ll go over here to this side and we’re going to be doing the same thing so go towards the right of the santa site here you could just bring it over by one now go out from the corner of that bring it over by 12.

Now go back in bring it over by three and then starting right here work your way towards the back and bring it out by seven so this is what it’s looking like now let’s head on over here towards this right side and we’re just going to bring this over

Towards the left by 11. and now over here towards the left we’ll also do the same thing and now you should just have this space in the middle we’re going to bring it out from the corner and place another 11. and there we go we have the entire

Foundation for the house marked out i’ll head on back up towards the front so this is what everything should be looking like so far now make sure to switch to your pillar quartz blocks and we’re going to start marking these out where every outer corner is going to be

So we’ll start here at the front side and i’ll just line up where this corner is first for now i’ll just go ahead and place where each pillar is going to be so we have that one there and then we see this corner here we’re gonna go ahead and place one

We have this one here as well we have this corner so we did four so far here at the front i’ll go ahead and do the same thing over here at the right side so we have all those marked out at the front side we’ll head on towards the back

I’ll just go over here first you can see we have this corner right there we have this one this one over here and then this one we’ll do the same thing over here on this side And then here at the back we have two more for this piece that juts out in the middle so now we marked out where all the pillars are going to be now you can see we already have one layer so what we want to do is add an

Additional six on top of all those so they’re gonna be seven in total So i brought up all those pillars i’ll head on back up towards the front and we’ll start marking out where all the walls and windows are going to be so the first thing i’m going to do is switch to the diorite and on top of all

The endocyte that you see you just want to place one layer of the diorite so i’m just going to go all the way around just anywhere that you see the endocyte add one layer of this diorite So i have the layer of diorite like that now let’s start marking out the windows so i’m going to start here at the front side where the middle section is right here make sure you have your deep slate tiles i’ll just head on over here towards the

Left you just want to make sure to leave one space away from the pillar here it could just bring up four layers of the tiles like that go ahead and skip over two spaces and bring up another four right here skip over one space bring up another four

And then skip over two and have another four here and then grab your diorite we’ll just go right up against the pillar like that just bring it all the way up to the same height and then we’ll go ahead and fill in these two layers above the tiles We’ll go ahead and add an extra layer here towards the right of that window and then right down the middle we just have this one space here which will also fill in and now you can see we have a window here and a window there so make sure to

Grab your smooth quartz stairs we’ll have two upside down at the top and then all the other space we’re gonna fill in with the white stained glass panes so now we have two windows like that we’ll head on over here towards this right side and we’re gonna do the same thing

So i’ll actually just start out with the diorite and place a layer right up against this pillar and then we’ll start the windows so we have the four layers of the deep slate tile right there we skip over two we have another four skip over one have four

Skip over to have another four we’ll go ahead and just jump right on into the windows so we have the two upside down smooth court stairs at the top is the white stained glass panes and then we’ll have the layer of diorite right down the middle we’ll fill

In the two layers at the top of the windows and that will have an additional layer here at this side so this is what the front is looking like so far now let’s continue with the diorite and we’re going to add two more layers right up against the layer that we already

Have here so we have one and two we’ll do the same over here so now this space here in the middle is where the front door is going to be so head on over here towards this left first just right up against where these three spaces of diorite are you could go

Ahead and delete that first block right there we’ll do the same on this side and then just skip over one space and carve out the remaining three right down the middle so the space of three is where the doorway itself is going to be and then we just have a couple small

Windows on each side let’s go ahead and bring up this diorite to the same height as the rest of the wall and then we’ll grab our white stained glass panes we’ll just have three going up on each side and then right down the middle we’ll

Shape out how the door is going to be so we’ll bring up three on each side once again and then we’ll go ahead and curve out the bottom we’ll skip over the middle and curve out the top the empty space in the middle is going

To be the dark oak fence for the handle of the door grab your smooth quartz stairs we’ll have all of these upside down right above the glass and then the rest of the space up here at the top we’re gonna fill in with diorite so now this is the front wall right here

At the center of the house i’ll head on over here towards the right and we’ll start filling in all of this so first we’ll just go to this corner here where this l shape is we’re going to fill this entirely in with the diorite We’ll head on over here towards the right we just have this one space here we’ll go ahead and fill that in you know what i’ll do the same over here at the left side as well so now we’ll go ahead and mark out how the windows are going to be right here in

The middle so for these middle sections they’re actually going to be a couple blocks taller than the rest of the walls that we have here for the first floor so make sure to grab your pillar quartz blocks and we’re gonna add two more just right

On top of the two pillars that we have here we’ll go ahead and do the same thing here at the back and i’ll do the same thing over here at this right side as well and now since we’re here at the right side this is where we’ll go ahead and

Start one of the windows so make sure you have your diorite will just go up against each pillar and bring up four layers at the top we’ll go ahead and just have a layer going straight across from one side to the other and then on each side we’ll just skip

Over one space and fill in three right there and three right here so we have one we have four in the middle and one now all that space will go ahead and fill in with white stained glass panes So that’s looking good so far now let’s switch back to the diorite we’ll just go up against the pillar again and fill this all the way into the top And then we’ll skip over one space so we’re just going right here and we’ll just bring this all the way up and then where the single spaces are we’ll go ahead and fill in with two layers of white stained glass panes an upside down smooth quartz stair and then a block of diorite

Would do the same at this side so we have the glass the stair and the diorite and then right here in the middle we’re gonna bring up four layers of glass so we’ll go ahead and switch to that so it’s four blocks wide and then it’ll be four blocks in height So it is right there for now we’ll go ahead and switch back to our diorite we’ll just place one here and here we’ll go ahead and add the four layers of upside down smooth court stairs And i’m thinking what i’m gonna do is just leave the wall as it is for now and when we do the roof for the house we’ll go ahead and finish off the rest of the wall before now i’ll just leave it as it is and now what we just did here we’re

Gonna do three more times so we have the back side over here at the right and then both the front and the back over there at the left so i’ll show you how to do it one more time here at this back side and then i’ll pretty much just skip

Right over those sides since it’ll be the same thing so you can pretty much see exactly what we just did there so we’ll just go ahead and have a layer of diorite going all the way up to the top of the pillar and then we’ll just grab the white

Stained glass panes we’ll have three going up on each side next to that we’ll have a layer of diorite we’ll just bring this straight across from one side to the other and they will have three spaces right next to the glass and then the rest of this here in the

Middle will be filled in with the glass as well And then switch back to the diorite and we’ll bring this all the way up until it’s one block higher than the rest of the wall that we have here And then grab your white stained glass panes where the single spaces are we’ll fill in with two glass and then an upside down smooth quartz stair and then a block of diorite do the same over here And then right down the middle we’ll go ahead and have the upside down smooth court stairs at the top and then the rest of it glass So now if the back here matches up with the front and over here at the left let’s go ahead and just fill in the space of the diorite right here to the same height as that lower pillar and then let’s go over here at the right and fill in the three spaces here

You don’t want to bring it up to the same height as this pillar that we have here you just want to leave two spaces below it so you can see right there we still have the two layers so that was just brought up to the same height as the front side

So we have this back side all filled in just as we did it for the front now i’m going to head on over here to this side and just do the same exact thing so i’ll see you guys once i have it all done So i marked out the windows for both the front and back side let’s go ahead and fill in the space of the dial right here and over here at the left So there we go we have all of that marked out we’ll head on over towards the sides and we’ll fill in the windows that we’re going to have here we’ll do the same over at that side so we’ll go right up against the pillars we’ll have a layer of dye right just to

The same height and that we’re just gonna have two windows here so grab your deep slate tiles we’ll bring this up by four on each side we’ll skip over two have another four Do the same over here so we’re then left with one space right down the middle we’ll go ahead and mark out how the windows are gonna be so grab your smooth quartz stairs and place two upside down at the top grab your white stained glass panes fill all of this in

And then all of the other space we’re gonna fill in with diorite So now what we just did here we’ll then do it to this side so now we have the sides all filled in we have the front we have the big windows where all of that space is so now we just have to do the windows that we’re gonna have here for these

Little sections on each side and then the back side and then i’ll just leave it at that here for part one so for these smaller sections just continue with the diorite and we’ll have a layer going up on that side and this side just to the same height as

That pillar and then we’re gonna have a window right down the middle so the four layers of the tiles again these stairs with the glass and then you can see we have two additional layers of diorite at the top so now we’ll do the same over here on this side

And now let’s go ahead and focus on the back side right here so we’re pretty much matching it up to how we did the front so i’ll head on over here towards this right side first we’ll have a layer of the diorite right up against that

Pillar you can see we have two windows there one space apart like in between them so we’ll go ahead and pretty much just do the same thing so we have this window here skip over that space have another window and then we have one more space here which will be filled in

With diorite i’ll do the same on this side so we’ll go right up against that pillar fill that in we have this window skip over one we have another window alright i’ll go ahead and just finish filling the rest of all of this in So we have each one of those walls filled in now let’s go right down the middle you can see how we have the front door we’re gonna have a back door right here exactly as that one is so we have the layer of diorite up against the pillar like that

We’ll go ahead and delete this block of the diorite on each side we’ll skip over one space and carve out the three blocks in the middle we’ll bring up this diorite to the top and then we’ll grab the white stained glass panes we’ll have three on each side

And then we’ll have three right here for the middle space we’ll bring out the bottom and the top empty space in the middle will be the dark oak fence upside down smooth court stairs at the top and then the rest of the space with dire right

And there we go now we have this backside filled in so i brought up all of the exterior walls for the first floor of the house so we have all of that marked out and i think what i’ll do is just end off part one right here so i think we got a

Good amount done so in part two we’ll probably bring up all the exterior walls here for the center of the house right here for the second floor and then i’ll probably do the roof for both the left and the right side and that’ll probably be all we do in part two

I’ll probably also do the front porch in the back deck but anyway i’m gonna go ahead and leave it at that here for part one all right guys that’s gonna be it here for part one for this tutorial on how to build this mansion if it helped

You be sure to please leave a like subscribe for more i’ll see you guys in part two