It said the first thing we can do is take our wooden logs and on each of the stone brick the chill zone brick on each of the pillars that we’ve placed on the foundation layer we’re then going to go one two three four five with Lance with A stone brick chiseled on top and we’re going to do that for each of these other pillars where the Childress stone brick is now I’m gonna quickly go around to finish off the rest you do the same and I’ll be right back to you okay so once You have all of those pillars in place what you then want to do is take your stone chisel stone brick and we’re gonna place a corner a corner and this three little line with a spruce wood in the center and then go one two three up with Spruce wood on either side to the stone brick chisel stone brick and then another piece of wood to make this square we’re then gonna place in purple stained glass on the top a magenta stained glass in the middle and pink stained glass on the bottom and we’re Gonna do this for each of the wall sections which will be going round oops the rest of the structure so to mark it we’re also gonna be placing all along here here and here all along these walls messages don’t actually copy this clay placing bit this is just a mark out Where you’re going to be placing each wall and it’s pretty it’s pretty simple you’re just placing it where we place the wall before on our foundation layer going around like so so you want this same pattern on each of these red markers that I’ve placed going all the Way around the rest of the structure now I’m gonna quickly go out and place in the rest of these walls you do the same and I’ll be right back to you okay so once you’ve got all of those walls and windows in what you then want to do is Take some stone bricks and we’re gonna go1 stone brick then a stone brick stare and front upside down two stone bricks then a slab then we’re gonna take some spruce wood and place a spruce wood then to spruce wood then a single spruce wood going diagonal like that with hanging in a Place to spruce wood logs and a chisel stone brick we’re then going to take plain oak wood fence place them in this gap these four blocks of gap just like so then once we’ve got that we’re going to place an upside-down stair we’re going to take a wall and then we’re Gonna place that wall on top of the upside down stair and then once you got that in you want to be replicating that to each of the pillars on these faces which are sticking out towards the actual edge of the building so we want to be doing that all the way around just Like we’ve done before and these sections so I’m going to quickly go and do that use the same and I’ll be right back to you okay so once you’ve got all of those bits of pillar detailing what we can then do is take our logs and We’re going to start off by going around the circumference of the chisel stone so we’re making it so there’s this log line going all the way around the structure just like this and then going all the way around on the sides the tail we meet back up with where we Started like so and then what we can do just to make this next part a bit easier actually gonna add in two things here so we’re just going to quickly take some spruce wood planks and we’re just going to fill in this area where we have the Czech chill stone and also stone brick line so we’re going to fill in this entire floor but as well as that we’re also going to remove these corner bits which I already did there there and there and we’re also gonna fill in this floor as well where we’ve put in our our Top layer of blocks just fill in all of this floor and all of this bottom floor now I’m gonna quickly fill these in you do the same and I’ll be right back to you okay so once you’ve got those two floors in what you then want to do is Take some stone brick slabs and what you’re gonna do on each of these outer corners is place a slab on the upper half of the block next to these stone bricks and then a slab on top of that and we’re gonna do that for each of these corners now we Can quickly around do these since they’re very small features to include they’re just basically something to make the corners look less flat so we’re going around just adding them in very quickly like so that’s all of them and then on each of these wall sections you Want to be placing in four blocks like that in the shape of a key then you want to be placing a stair a stair below them followed by a spruce fence and of a spruce fence a block a block a slab a slab up top as well Followed by stone brick or stone brick an upside-down stair that’s there an upside-down stair I’ll upside down stair stair and then finally spruce stairs upside down on the front faces of each of those blocks just like that and you want to be doing that same pattern to Each of these wall sections even in these little gaps here as well except actually leave out the corners for now so we’re gonna leave out these corners here and just to mark them I will place in so we’re leaving this corner this corner and this corner and I think That’s all the corners that we need to leave out up now this one as well just like we did before so we’re gonna leave out those corners but what you want to do is do that same pattern to the rest of these walls just like we did before Now I’m gonna quickly go and do that you do the same and I’ll be right back to you okay so once you’ve got all of those bits of wall detailing in going all the way around well you then want to do for each of the corners that we left you want to be Removing any markers you made if you didn’t make any markers then that’s fine too you want to be doing what we start off with so you’re on a block a block a block a block followed by an upside-down stair and an upside down stair with an upside-down stone and a right way around Stair on the sides here then four blocks like so with slabs followed by fence fence fence and fence just like we had before then three block three and a block in the center you then want to go a slab in this corner here a slab here a Stair and a stair placing your slabs in between the top two stairs just like that then take your stone brick slabs and place a slab with another slab on top just like that and you want to be doing this for all four of those corners that we’ve marked so I’m gonna quickly go Around finish off my other three you do the same and I’ll be right back to you okay so once you’ve got those corners done what you think and do is take your logs and we’re gonna place them on the end of these first four bits of chilled Stone then these four we’re gonna leave these to place it on these four and these four on the side on these four these four place one facing upwards like that place the rest on these four and finally these four like so then on each of those we’re going to be placing on a Button on each of the faces which are actually visible to the rest of the building just like this like so going all the way around until we have them in place like so then what we’re gonna do is place a cobblestone slab underneath each of our wooden logs Going going all the way around so I’m just gonna walk through and basically do this with you so doing it all the way around here wherever we’ve placed one of these pointing out logs including on that corner where we’ve got one facing up just like that and then finally we’re Going to take our cobblestone stairs and we’re gonna place a stair and upside-down stair and upside-down stair with three slabs connecting up the stairs and we’re gonna do that all the way around just like we’ve done before so if it makes it easier you can quickly place them like so So we can quickly go around I’m just going to do this with you because this would be the last bit we do for this part of the tutorial since that means we have another floor actually complete so we’re almost done so we’d go around this as well and then down this side exactly The same we’ll just leave out the bits where we’re not actually wanting to place any of this cobblestone gang round and then finally finishing off with this bit here it should be our last bet it might not be actually both sides with the cobblestone just like that it’s Basically like adding a bit of extra foundation to this first floor to secure the building since there’s a lot just a fashion piled on top of that as well so once you’ve done that you should have all of this section done so thanks watching guys have been join them to Live like subscribe leave a comment and also tune in next time where we work on a bit more of this building so see you guys next time bye Video Information
This video, titled ‘Minecraft Fantasy Builds – Large House Tutorial – Part 2 – How to Build a Fantasy Large House’, was uploaded by Farrahs on 2016-06-13 23:30:01. It has garnered 5853 views and 90 likes. The duration of the video is 00:12:11 or 731 seconds.
As seen in my Fantasy Let’s Build Series, this is one of a pair of identical houses which can be combined to form one whole house. In this set of tutorials I will be showing you have to shape, create and decorate this house for your own personal usage.
===================================================
Previous Tutorial – Large House Part 1 – https://youtu.be/ALCLa2eF7Tw Next Tutorial – Large House Part 3 – https://youtu.be/pgrCaqw-1jw
Remember to leave a LIKE, COMMENT and SUBSCRIBE if you enjoyed my work and want to see more of it.
================================================
Twitter: https://twitter.com/Farrahs_MC
================================================
Merchandise: http://farrahstore.spreadshirt.co.uk/
================================================
Help Expand Farrahs’ World: https://www.patreon.com/FarrahsMC
================================================