Welcome back guys it’s fishtis again today i got two inventions combined in one we’re going to be speeding up the video pretty fast so don’t be hesitant to use your pause button if you have any questions leave in the comments the first part of this is the double Doors with one button the second part of this tutorial is going to be the piston waterfall doors here i’ll show you the final product of what uh we’re trying to achieve okay first thing you’re going to do is you want to make a rs nor latch you can just follow what i do You want a three by three and there is your rs noir ledge setup all right after you have your rs nor latch in you want to go ahead and put your pistons in next so we want to go two down and four wide and this space right here is for your wiring And then you want to go ahead and put your pistons in now next you want to go ahead and put your put some repeaters in and you want to wire these together and you want to run it to your rs nor latch all right and it wants to go to the Output of the rs nor latch which is here next you’re going to put in your top there this is and they’re going to go four above this point right here so one two three four go ahead and put them in next to them now we can go ahead and put in the Piston doors here next thing i’m gonna do is you wanna get power to these top pistons so what you’re gonna have to do is you’re gonna have to go to the same output as this wire so we’re gonna make this output go up to these pistons Now how we’re gonna do this is we’re gonna do vertical redstone if you don’t know how to do vertical redstone it’s pretty easy i’m gonna show you how to go up with the vertical redstone on this now you want to go ahead and put your repeaters in and wire it all together And now we have this sealed off all right now that we have this in what you want to do is you want to make your inputs which is the buttons that you’re going to be using and you want to run them into the back of The two sides of the rs latch so here and right here a good tip to have is to go ahead and test these to make sure you got the right ones so i would put pressure plates down here and go ahead and step on them And that way you will know which one is open which one is closed so that one’s open and this one should be closed okay now that we know which buttons do what we’re going to take this and since this is the open button we’re going to run this wiring down to a Button to where our entrance would be so right about here that looks alright go ahead and put our other button in let’s go ahead and do the same for the close button as you can see here my redstone doesn’t reach all the way to the repeater if you have this situation happen you Can go ahead and just put in a repeater up ahead here so right here looks bad looks good and that should reach all the way and it does that one opens and this one closes all right now that we have our doors open and closed We want to go ahead and put the exterior doors in so you want to put one right in front of the button the other one right next to it next you want to run that redstone wire that’s going from here to here you want to put a redstone torch underneath this other door On this block no directly diagonal so let’s stick down there and i’ll show you what i mean so the block right here and when i put this redstone torch in it is going to power this redstone and we do not want that as you can see So to avoid that you can go ahead and just dig right underneath and that will avoid any signal coming through all right and if you hit this it still doesn’t work what you have to do is you have to depower this redstone torch when you hit that button So when you hit this when you step on the button this sends the signal through and you need it to also send a signal into this block that the resonant torch is laying on this depowers the signal which will activate this block change and this door will open as well Putting it here does not work it does not go directly into this block you need to go directly into the block so what you’re going to do is you’re going to route it this way here then here now this also doesn’t work because it’s not going directly into This block so in order to cut the signal from here you just put a block down and now it goes directly into that block so if i hit this button now they should both open all right and that works you can go ahead and cover this up making sure not To cut any of the wire off let’s go ahead and do the same thing from the back side first one go ahead and put your doors in and then you wanna do the same thing you did in the front let’s dig down and here’s your button and remember you Want to go diagonal so underneath this block right here is your redstone torch now you’re at a weird angle here you can’t really go directly into that so what i suggest doing is going away from the torch here and going directly into this block so you want to run the redstone just Like that and we have that same problem as before so just to show you when you come over here and you put this block in cuts the power here and it lets it go directly into that block we can cover this up and this should work Now that you have both doors in place and the piston door you can go ahead and start covering up all your redstone so making sure not to cut any signals we’re going to go ahead and just cover this up now i cannot cut the signal off here or else That will happen so let’s go ahead and put that back all right now that we have it in let’s go ahead and give it a test run there you have it working now in order to get that desired waterfall effect all you have to do is you have to go to your Root feeders here and you can go zero six one tick two ticks three ticks and we’ll go ahead and do the same with the bottom ones so the far one zero ticks one take two ticks three ticks and now this should work out just how we had it on the other one And there you have it thanks for watching make sure you subscribe i’m having weekly videos coming out uh i will have more advanced redstone i will have more basic redstoning i will cover all the redstone tactics from a to z and then move on to the combined redstone tactics for more advanced players Video Information
This video, titled ‘Minecraft Multi-Piston Doors Invention Minecraft Redstone’, was uploaded by Nature-N-Stuff on 2012-01-26 17:15:16. It has garnered 1240 views and 6 likes. The duration of the video is 00:08:01 or 481 seconds.
Intro: Minecraft 1.0 Full release help and tips about redstone, crafting, minecarts, mods, how to, texturepacks, news, info, techniques, single player, ssp, multiplayer, smp, lighting, epic videos, doors, pistons, and much more Minecrafting junks!
VIDEO: Redstone Double Doors AND Waterfall Effect Piston Doors Combined Together!! Minecraft Multi-Piston Doors Invention Minecraft Redstone
TEXTUREPACK: Is a Custom mixture of Johnsmith edit 11 MIXED WITH Misa402 AND KoP 1.1 V5 Photo Realism 128. I edited them personally using the PNG files found in each zip.
MY CUSTOM TEXTURE PACK: http://adf.ly/5ISxW
ADFLY DOWNLOAD THIS MAP: http://adf.ly/1352260/fish-tits-multi-piston-doors